Lunar Phases Advanced PaneHigh Precision Lunar Phases Advanced Pane Indicator
Added Benefits of the Lunar Phases in Pane form:
-Oscillator representing Lunar-Earth Distance and Declination with event markers
-Data fields for true Lunar-Earth Distances and Declinations for easy use in connected scripts.
-Declination values normalized to median Distance. Rising/Falling above and below where median = 0.00° from Earth's ecliptic plane.
-Phase based line color change on Distance oscillator, increasing data density for better visual reference
Our Beautiful Companion in the Night:
At New Moon, the Moon sits between Earth and the Sun. The Near side is completely dark, so the Moon is unseen (except during a solar eclipse). At Full Moon, the Near side of the Moon is on the opposite side of Earth from the Sun, so sunlight hits the entire face we see—creating that big, beautifully bright Ball in the night sky. Due to tidal locking, we never see the Far side of the moon from Earth's surface.
Right after New Moon, a thin Waxing Crescent appears low in the western sky at dusk, growing into the half-lit First Quarter, then a bulging Waxing Gibbous until reaching Full Moon which rises exactly as the Sun sets. After Full, it shrinks through Waning Gibbous, Last Quarter (half-lit visible in the early morning sky), finishing with a Waning Crescent (thin sliver again) just before disappearing at dawn for the next New Moon.
The Moon’s orbit is elliptical, so its distance from Earth varies. When Full and near Perigee(closest approach) it appears larger and up to 30% brighter leading way to the name, Super Moon. Near Apogee(farthest distance) the Moon will look smaller and dimmer, or Micro Moon. These extreme alignments tend to cluster in "seasons" because the point of closest approach slowly drifts around the orbit, completing a full cycle every 18.6 years.
Chart zoomed out to highlight the seasonal SuperMoon behavior because of Distance at event:
This indicator places markers on the distance oscillator in the pane for every New/Full Moon. SuperMoon events use larger circles, MicroMoon events use smaller ones (both optional based on distance at event). Distance line color change by Phase, with option for progressive shading:
Precise Perigee (closest approach) and Apogee (farthest away) markers optionally appear on the Distance oscillator line as red diamonds for Perigee and green diamonds for Apogee.
Red line shows the historical minimum, Green line shows the historical maximum for Lunar-Earth Distance. Grey line shows the historical Median distance and/or dynamic Median given the 'Start Date' input to current bar time window. Chart with Apogee/Perigee markers on the Distance oscillator line with Phase based color change:
Chart with Declination enabled as purple line, normalized to the grey Median Distance line as 0.00 from Earths Ecliptic plane with Phase markers on Distance line. The 2 example, vertical lines show when distance extreme is aligned or apposing the declination extreme(1/4 cycle). This Lunar Apsides Precession behavior leads to the tracing of the SuperMoon and Eclipse seasons by 40.7° annually, completing 1 full cycle every 8.85 year cycle(~3,232 days):
The Lunar Apsides Precession refers to the slow rotation of the Moon's elliptical orbit's major axis (the line connecting perigee and apogee) in the direction of the Moon's motion, completing a full 360° cycle in approximately 8.85 years (about 3,232 days). This prograde precession occurs primarily due to gravitational perturbations from the Sun, which exerts tidal forces that torque the Moon's orbit, causing the apsides to advance by roughly 40.7° per year, resulting in the observed period that modulates the timing and magnitude of extreme perigees SuperMoons, and Eclipse Seasons over multi-year cycles.
Extended Functionality
This Advanced Pane version builds on the core Lunar Phase detection by adding Lunar orbital Distance and Declination represented as an oscillator on Pane with data values for easy connection to other scripts like the Universal BackTester :
Accuracy:
New and Full Moon times are typically within ±few minutes
Distances are typically within ±10–100 km ±few minutes
Declination values are typically within ±0.01° of astronomically true, normalized to median distance as 0.00°
The Info Table:
Current — live phase name, live geocentric distance, live Declination value
Next Phase — upcoming New or Full Moon, countdown timer, and expected distance
Next Extreme — upcoming Perigee or Apogee, countdown timer, and expected distance
Settings:
Thresholds group:
"Full"/"New" checkboxes turn SuperMoon and MicroMoon individually on or off for each
Distance inputs let you set your own km cutoffs for what counts as super or micro (defaults are common values around 369,000 km and 405,000 km)
Start Date and End Date control the time range the script scans for events (default 2010–2028)
Distance Boundaries:
"Perigee Extreme" checkbox On/Off with color picker
"Mid" for Median line with options for dynamic range from "Start Date" input to current
"Apogee Extreme" checkbox On/Off with color picker
Distance Oscillator:
"Declination" checkbox with color picker, and visual amplifier input to adjust the oscillation magnitude for enhanced visual reference
Phase Color Shading:
"New Shade/Full Shade" checkbox turns the Waxing/Waning line shade colors On/Off
Color pickers let you choose your own Waxing and Waning colors and shading step
Marker Settings:
"New/Full" marker checkbox with color pickers
"Peri/Apo" marker checkbox with color pickers
Information group:
"Show Info Table" turns the vertical panel On/Off. Text Size dropdown
"(New/Full)" checkbox adds detailed labels directly on New/Full bars with user selected time-zone, distance
"(Peri/Apo)" checkbox adds detailed labels directly on Peri/Apo bars with user selected time-zone, distance
Drop down time-zone for labels
Powered by multiple 50-term approximations of the ELP2000-82B lunar theory.
Disclaimer: The script was developed with assistance from Grok 4.1, always under human supervision and decision-making.
Educational
IV Volatility History v1.2# Realized Volatility History - Quick Start Guide
## What This Does
Displays historical realized volatility (RV) calculated directly from price movements. Compare it against your current implied volatility to identify options trading opportunities and gauge whether premium is expensive or cheap.
## How to Use
1. **Get Current IV**: Check your broker's options chain and find the ATM (at-the-money) implied volatility for your ticker
2. **Input the Value**: Open indicator settings and enter the current IV (e.g., `0.15` for 15%) - this creates a reference line
3. **Read the Chart**:
- **Purple line** = Historical realized volatility from actual price movements
- **Red dashed line** = Your current ATM IV (reference)
- **Orange line** = 30-day moving average (optional)
4. **Interpret the Data**:
- **RV below IV** → Options premium is relatively expensive (consider selling premium)
- **RV above IV** → Options premium is relatively cheap (consider buying options)
- **IV Rank > 70%** → High volatility environment
- **IV Rank < 30%** → Low volatility environment
## Settings You Can Adjust
- **Current ATM IV**: Reference line for comparison (update periodically)
- **RV Rolling Window**: Calculation window for realized volatility (default: 10 days)
- **Lookback Period**: Period for IV rank calculation (default: 60 days)
- **Show 30-Day Average**: Toggle moving average line
## Limitations
This indicator requires manual IV updates since TradingView doesn't have direct access to options data. You'll need to check your broker periodically and update the input for accuracy.
---
*Method: Calculates annualized realized volatility using rolling standard deviation of log returns, providing a comparison baseline for evaluating implied volatility levels.*
AI Gamma Levels - Options Flow Signals v1.1# AI Gamma Levels - Options Flow Signals
## 📊 Overview
An educational indicator that estimates institutional options positioning using price action, volume analysis, and technical indicators. Designed to help traders identify key support and resistance zones based on gamma exposure concepts commonly used by market makers and institutional traders.
## 🎯 Key Features
**Gamma Flip Level (⚡)**
- Neutral zone where market maker hedging behavior changes
- Calculated using VWAP and price action
- Acts as dynamic pivot point for intraday trading
**Call Wall (🔴)**
- Resistance zone from heavy call seller positioning
- Identifies where upward price movement may stall
- Based on recent highs + ATR-adjusted volatility
**Put Support (🟢)**
- Support zone from put seller positioning
- Shows where downward moves may find buyers
- Calculated from recent lows with volatility adjustment
**AI Trade Signals (🔮)**
- Multi-factor confluence detector with confidence scoring
- Only triggers on high-probability setups (70%+ confidence)
- Provides clear entry, stop loss, and target levels
- Combines gamma regime, RSI, volume, and price proximity
**Regime Detection**
- Identifies Positive Gamma (bullish bias) vs Negative Gamma (volatile) environments
- Background coloring shows current market regime
- Helps adapt trading strategy to market conditions
**Trading Zone Visualization**
- Shaded area between Call Wall and Put Support
- Shows expected trading range based on gamma positioning
- Zone width indicates market compression or expansion
## 🧠 How AI Signals Work
The AI signal layer analyzes multiple factors simultaneously:
1. **Gamma Regime Alignment** - Price position relative to Gamma Flip
2. **Level Proximity** - Distance to Put Support or Call Wall
3. **Momentum Extremes** - Fast RSI showing oversold/overbought
4. **Volume Confirmation** - Above-average volume on the setup
5. **Price Action Quality** - Bar range and volatility characteristics
Signals only trigger when ALL conditions align, reducing noise and false signals.
**BUY Signal Requirements:**
- Price above Gamma Flip (positive regime)
- Near Put Support (within 0.5%)
- RSI < 35 (oversold)
- Volume spike (1.4x average)
- Confidence ≥ 70%
**SELL Signal Requirements:**
- Price below Gamma Flip (negative regime)
- Near Call Wall (within 0.5%)
- RSI > 65 (overbought)
- Volume spike (1.4x average)
- Confidence ≥ 70%
## 📈 How to Use
**For Day Trading:**
- Watch for bounces at Put Support in positive gamma regime
- Look for resistance at Call Wall in negative gamma regime
- Use AI signals for high-conviction entries with clear risk levels
**For Swing Trading:**
- Monitor zone width for compression/expansion cycles
- Enter when price returns to zone edges with AI confirmation
- Use Gamma Flip as trailing stop reference
**For Options Traders:**
- Identify where institutional gamma is concentrated
- Anticipate pinning behavior near expiration
- Understand market maker hedging flow impact on price
## ⚙️ Customization
**Display Settings:**
- Toggle individual levels on/off
- Show/hide trading zone shading
- Enable/disable AI signals
**Calculation Parameters:**
- Lookback Period (5-100 bars) - adjusts level sensitivity
- Volatility Multiplier (0.5-3.0) - widens/tightens zones
- AI Confidence Threshold (60-90%) - signal selectivity
**Visual Customization:**
- Custom colors for all levels
- Adjustable transparency for zones
- Label size and positioning
## 📊 Info Table
Real-time dashboard showing:
- Current Gamma Flip price
- Call Wall resistance level
- Put Support level
- Active gamma regime
- Trading zone width (%)
- AI signal status and confidence
## 🔔 Built-in Alerts
Set alerts for:
- Gamma Flip crossovers
- Price approaching Call Wall
- Price approaching Put Support
- AI BUY signal triggered
- AI SELL signal triggered
## 📚 Educational Background
**What is Gamma Exposure?**
Gamma measures how fast market makers must hedge their options positions as price moves. Large gamma concentrations create support/resistance as dealers buy into weakness and sell into strength.
**Positive vs Negative Gamma:**
- **Positive Gamma** (above Gamma Flip): Market makers hedge by stabilizing price
- **Negative Gamma** (below Gamma Flip): Market makers hedge by amplifying moves
**Call Walls & Put Supports:**
Heavy open interest at specific strikes creates "walls" where price tends to gravitate toward or bounce away from, especially near expiration.
## ⚠️ Important Notes
**This indicator uses price and volume approximations**, not real options chain data. It demonstrates gamma exposure concepts for educational purposes.
**For true options flow analysis**, consider using platforms with access to real-time open interest, options volume, and Greeks data.
**Risk Management:** Always use proper position sizing, stop losses, and never risk more than you can afford to lose. This indicator should be one tool in your complete trading strategy.
**Not Financial Advice:** This is an educational tool. Past performance does not guarantee future results. Always do your own research and consider consulting with a qualified financial advisor.
## 💡 Best Practices
1. Combine with your existing strategy - don't trade signals blindly
2. Use on liquid stocks/indices with active options markets
3. Pay attention to regime changes at Gamma Flip crossovers
4. Higher timeframes (15m, 1H, 4H) tend to be more reliable
5. Adjust parameters based on the asset's typical volatility
6. Wait for AI signals with 75%+ confidence for highest quality setups
## 🎓 Who This Is For
- Options traders seeking to understand institutional positioning
- Day traders looking for high-probability support/resistance
- Swing traders identifying key zone boundaries
- Anyone interested in learning about gamma exposure impact on price
- Traders wanting AI-assisted trade signal confirmation
---
**Happy Trading! If you find this indicator helpful, please leave a like and comment with your feedback.**
OI: Simple Reminder TableOI: Simple Reminder Table is a lightweight, configurable on-chart note panel designed to keep your trading rules in front of you while you trade. It’s intentionally simple: you write the reminders, and the script displays them in a clean table overlay.
What it’s for
Use it to reduce “in-the-moment” mistakes and keep discipline when emotions rise. Common reminders include:
Risk management: “Stop loss set?”, “Position size correct?”, “Max loss per day”
Psychology checks: “Don’t revenge trade”, “No FOMO entries”, “Wait for confirmation”
Strategy rules: entry criteria, invalidation points, session rules, news filters
Process reminders: “Journal the trade”, “Mark HTF bias”, “Only trade A+ setups”
Features
Choose 1 to 5 lines (toggle each line on/off).
Customize table position (top/middle/bottom + left/center/right).
Style controls for text size, alignment, colours, plus optional background, frame, and grid lines.
How to use
Add it to your chart, edit the line text to match your plan, and keep it visible during execution. It’s a simple tool, but it’s surprisingly effective for preventing “I knew better” trades.
Fair Value Gap (FVG) RFF001I dont what to say here but i need to write studd apparently, its really just fvgs
NY Session 15 min ORB + Fib RetracementThis indicator builds a New York session Opening Range (ORB) and plots Fibonacci retracement levels based on that range.
What it does
Defines the Opening Range using the NY cash open (default: 9:30–9:45 ET)
Tracks the ORB high and low during that window
Locks the ORB once the window ends (recommended)
Draws Fibonacci retracement levels from the ORB range
Optionally fills the space between fib levels
Displays price tags for ORB levels and fib levels on the right side
Sessions
ORB window is configurable (default: 9:30–9:45 ET)
Fib levels are only shown during the selected plot session
(default: 9:30–16:00 ET)
Nothing plots outside the selected fib session
Prevents lines from connecting across trading days
Fib behavior
Fibs are calculated from the ORB high and low
Direction can be:
High → Low (default)
Low → High
Common fib ratios are included by default:
0.236
0.382
0.500
0.618
0.786
All ratios are user-editable
Visuals
ORB High = green line
ORB Low = red line
Fib levels = gray lines
Optional shaded fill between fib levels
Optional right-side labels showing:
ORB High / Low price
Fib ratio and exact price
Recommended use
Designed for intraday trading
Best used on NY session instruments (ES, NQ, SPY, QQQ, etc.)
Works well on lower timeframes (1–15 min)
Locking the ORB at session end is recommended for consistency
Notes
Indicator does not generate trade signals
Levels are intended as reference only
Always use proper risk management
Adaptive Trade Probability Gate (TRADE / NO TRADE) v1.1This indicator is a context and probability filter, not a buy/sell signal.
It estimates the real-time probability that a trade will succeed by combining:
Broad market conditions (index behavior, volatility, participation)
Current stock structure (directional efficiency, relative strength, exploitability)
The output is a single decision:
TRADE → conditions are favorable; trades have positive expectancy
NO TRADE → conditions are hostile; even good setups tend to fail
The model adapts automatically to changing markets — it is not tuned to a fixed holding period, strategy, or regime. It reflects whether the market is forgiving or hostile right now, and whether the specific stock is worth engaging.
This indicator is designed to be used before entry to:
Filter low-quality trades
Adjust position size based on probability
Set realistic expectations for follow-through
It does not generate entries or stops.
It helps you decide when to trust your setups and when to stand aside.
FVG CreativeTraderFVG Indicator - Overview
What It Is
A multi-timeframe Fair Value Gap detector for Smart Money Concepts trading. Fair Value Gaps are price imbalances where institutional traders moved so quickly they left unfilled orders. These zones act as magnets, with price often returning to fill them, creating high-probability trade setups.
Key Features
Track up to 10 timeframes simultaneously (1-min to monthly) with each timeframe color-coded for easy identification. FVGs appear as boxes on your chart with customizable labels, and automatically disappear when filled to keep your chart clean. Consequent Encroachment (CE) lines mark the 50% midpoint of each FVG for precision entries with tighter stops.
How to Use
Set your preferred timeframes (e.g., 15M, 1H, 4H for day trading), customize colors per timeframe, and enable "Delete boxes after fill" for a clean workspace. Enter trades when price returns to higher timeframe FVGs, using the CE line for tighter entries. Memory-optimized to track 100 FVGs per timeframe without lag, with built-in filtering to hide lower timeframe noise when needed.
Key Features
✅ 10 Independent Timeframes - Track FVGs from 1-minute to monthly charts
✅ Auto-Mitigation Detection - Knows when FVGs are filled
✅ Custom Colors Per Timeframe - Never confuse different timeframes
✅ Consequent Encroachment (CE) Lines - 50% midpoint of each FVG
✅ Flexible Display Options - Show/hide any timeframe instantly
✅ Box Length Control - Extend FVG boxes as far as needed
✅ Label Customization - Size, position, and color control
Auction AAL: V3🔵 Big blue On AAL Neutral balance
🟦 Mini blue above Above AAL Bullish acceptance
🟣 Big purple Below AAL Bearish balance
❌ white/blue X Away from AAL Failure / trap
Acution theroy based.
sets a netrual price and after price returns it detects where price will go. from buyer acceptance and seller acceptance.
Evidenzia Data Specifica DinamicaSpecific Date Highlighter
Descrizione (Italiano)
Questo indicatore semplice ma estremamente efficace permette di evidenziare graficamente un'intera giornata specifica selezionata dall'utente. È lo strumento ideale per chi ha bisogno di analizzare il comportamento del prezzo durante eventi macroeconomici passati, date di earnings, o particolari sessioni storiche.
Caratteristiche principali:
Selettore Calendario Intuitivo: Grazie all'input di tipo time, puoi selezionare la data esatta tramite un calendario pop-up senza dover inserire manualmente numeri per giorno, mese e anno.
Compatibilità Multi-Timeframe: L'indicatore funziona su qualsiasi timeframe. Se sei su grafici intraday (1m, 5m, 1h), colorerà lo sfondo di tutte le candele appartenenti a quel giorno. Su grafici Daily, evidenzierà la singola candela selezionata.
Colore Personalizzabile: Puoi scegliere il colore dello sfondo e la sua opacità direttamente dalle impostazioni per adattarlo al tuo tema (Light o Dark).
Data Dinamica: Lo script è progettato per riconoscere automaticamente la data odierna come punto di partenza, facilitando l'analisi rapida dell'ultima sessione.
Casi d'uso:
Backtesting visivo: Evidenzia i giorni di rilascio dei dati CPI o decisioni FOMC per studiare la volatilità.
Journaling: Segna i giorni in cui hai effettuato trade importanti per ritrovarli facilmente nello storico.
Analisi Ciclica: Identifica rapidamente date specifiche in cui si sono verificati minimi o massimi storici.
Description (English)
This lightweight and effective tool allows you to highlight a specific full day on your chart. It is perfect for traders who need to visually isolate price action during macroeconomic events, earnings dates, or key historical sessions.
Key Features:
Calendar Picker: Easily select your target date using a built-in calendar input.
MTF Ready: Works seamlessly across all timeframes. On intraday charts, it highlights every bar within the 24-hour period. On daily charts, it highlights the specific daily candle.
Fully Customizable: Change the background color and transparency to match your chart layout.
Smart Default: The script is optimized to handle time logic correctly, ensuring the highlight starts exactly at 00:00 and ends at 23:59.
How to use: Go to settings, click on "Select Date", pick your day from the calendar, and the chart will instantly move the focus to that specific session.
RSIT v7 Scalper## M-BUY / M-SELL Signal Trading Guide (M1 Chart)
### Entry Rules (Optimized for XAU/USD on 1-Minute Chart)
**M-BUY Signal:**
- Wait for the 1-minute candle to close after M-BUY appears
- Enter LONG at next candle open
- Stop Loss: 1.5R = $2.25 below entry
- Take Profit: 1R = $1.50 above entry
**M-SELL Signal:**
- Wait for the 1-minute candle to close after M-SELL appears
- Enter SHORT at next candle open
- Stop Loss: 1.5R = $2.25 above entry
- Take Profit: 1R = $1.50 below entry
### Risk/Reward Settings (M1 Scalping)
- **1R = $1.50** (150 pips on XAU/USD)
- **SL: 1.5R = $2.25** (225 pips)
- **TP: 1R = $1.50** (150 pips)
- R/R Ratio: 1:0.67 (conservative scalping approach)
### Trade Example (XAU/USD M1):
```
12:34:00 - M-BUY signal appears at 2,050.00
12:35:00 - Candle closes, confirm signal
12:35:01 - Enter LONG at 2,050.00
SL: 2,047.75 (-$2.25)
TP: 2,051.50 (+$1.50)
Result: TP hit in 2-4 minutes typically
```
### ⏰ BEST Trading Sessions (Trade ONLY These):
**✅ Asian Session** (12AM - 9AM GMT) - Smooth trends, predictable moves
**✅ London Session** (8AM - 4PM GMT) - Highest volume, best signals
### ❌ AVOID Trading During:
**🚫 New York Session** (1PM - 9PM GMT) - Too volatile, erratic price action
- Market open first 15 minutes (whipsaw moves)
- Major news events (NFP, FOMC, CPI releases)
- Low liquidity gaps between sessions
- Friday close last hour (unpredictable)
### M1 Scalping Best Practices:
- **Chart timeframe: 1-minute (M1) only**
- **Trade ONLY during Asian and London sessions**
- Wait for full 1-minute candle close confirmation
- Average trade duration: 2-5 minutes
- Combine with 4TF Signal Table for higher accuracy
- Use Exhaustion + Reversal signals for A+ setups
- Maximum 3-5 trades per session (avoid overtrading)
**⚠️ CRITICAL: Stop trading when NY session starts - strategy performance drops significantly due to increased volatility and unpredictable moves.**
**Tested and optimized specifically for XAU/USD on M1 chart during Asian and London sessions only.**
Rampage QuantumBuilt on the Inertial Cycle Framework, this strategy integrates the multi-layer AB logic and dynamic risk control system of Rampage SOP.
It serves as an educational and analytical tool, designed to help traders visualize market rhythm and develop disciplined trading behavior.
Momentum Indikator (Avg Volume)Momentum Indicator (Avg Volume)
1. Purpose of the Indicator
The WMT Momentum Indicator (Avg Volume) is designed to highlight strong price movements accompanied by increased trading volume.
It specifically filters for trading days where:
volume is increasing,
volume is above its average,
and the percentage price movement exceeds a defined threshold.
The goal is to identify momentum days early — both bullish and bearish.
2. Display & Visualization
Visualization: Histogram (columns)
Panel: Separate indicator window (overlay = false)
Y-Axis: Percentage price change compared to the previous close
Colors:
🟢 Green: Positive daily movement (Close ≥ Open)
🔴 Red: Negative daily movement (Close < Open)
Zero Line: Reference line separating positive and negative momentum
3. Input Parameters
Parameter Description Default
+/- Movement Threshold (%) Minimum absolute daily price movement in percent 4.0 %
Volume Average (Days) Period for the moving average of volume 20 days
4. Logic & Calculations
4.1 Volume Conditions
The indicator only considers days where:
Volume is higher than the previous day
volHigherPrev = volume > volume
Volume is above the moving average
avgVolume = ta.sma(volume, volLength)
volAboveAvg = volume > avgVolume
➡️ This ensures that only days with unusually high market participation are taken into account.
4.2 Price Movement
Percentage change vs. previous close
priceMovePct = (close - close ) / close * 100
Absolute movement
absMovePct = math.abs(priceMovePct)
Intraday direction
priceMoveDay = close - open
4.3 Direction Logic
Condition Meaning
priceMoveDay ≥ 0 Bullish day (green)
priceMoveDay < 0 Bearish day (red)
4.4 Main Condition (Signal Filter)
A bar is displayed only if all of the following conditions are met:
showBar =
volHigherPrev and
volAboveAvg and
absMovePct >= moveThreshold
➡️ Interpretation:
Only strong price movements with rising and above-average volume are visualized.
5. Color Logic
barColor =
showBar and volGreen ? color.green :
showBar and volRed ? color.red :
na
Color Meaning
Green Strong bullish momentum
Red Strong bearish momentum
No bar Conditions not met
6. Plot Description
Momentum Histogram
plot(
showBar ? priceMovePct : na,
style = plot.style_columns
)
Bars are plotted only when showBar = true
Bar height represents the percentage change vs. previous close
Direction and color indicate momentum direction
Zero Line
hline(0, "0-Line")
Visual separation between positive and negative momentum
Helps with quick interpretation
7. Typical Use Cases
Identifying breakout days
Confirming trend continuation
Detecting distribution or accumulation
Filtering for momentum trading & swing trading
Complementing price action or volume-based strategies
8. Practical Interpretation
Tall green bar:
→ Strong buying pressure, potential trend start or continuation
Tall red bar:
→ Strong selling pressure, possible trend exhaustion or short signal
No bars:
→ Market without relevant momentum (sideways / low volume)
Magnus Bestest - Trade Manager1.) Ultra-useful trade manager for Futures trading on any asset, which automatically calculates the correct contract size based on your input of the dollar amount you’re willing to risk and the Stop Loss distance for your current trade.
2.) Additionally, you can place a very practical candle countdown label directly next to the currently forming candle, so you always know how long it is until it closes. This is especially useful for scalping, trading market opens, or trading news, where having this information instantly visible is crucial.
3.) This trade manager also marks the last candle before the London session, New York session, and New York Stock Exchange (NYSE) open, so you can always clearly see when you need to be ready to trade.
OS Buy Sell ZonesBuy Sell Zones for Intraday Trading
Paid Indicator for Nifty & Banknifty. Stocks & Forex.
This indicator works differently on different timeframes.
Basic use is on a 5 Minutes timeframe.
Dm for Access Or Email ostradesmumbai@gmail.com
AIE Crypto BoxAIE Crypto Box
The AIE Crypto Box highlights the previous day’s high, low, and midpoint directly on your chart.
It draws a clean, light-blue range box with optional midline, extending into the current session to help traders identify key liquidity zones, support & resistance, and breakout levels.
Designed for intraday traders and scalpers, the box provides a clear market framework for session opens, range trading, and break-and-retest setups.
Best used on lower timeframes (1m–15m).
ICT Flow Matrix [Ultimate]📊 Overview
ICT Flow Matrix is a comprehensive, all-in-one Smart Money Concepts (SMC) indicator built for traders who follow ICT (Inner Circle Trader) methodology. This indicator consolidates over 15 institutional trading concepts into a single, highly customizable tool—eliminating chart clutter from multiple indicators while providing deep market structure analysis.
Whether you're identifying liquidity pools, tracking order flow, or timing entries during ICT Macro windows, this indicator delivers institutional-grade analysis directly on your chart.
Pro Tip: use with ICT Market Regime Detector for clear language reads on everything.
⚡ Key Features
🎯 Price Delivery Arrays (PDAs)
Fair Value Gaps (FVG) — Automatic detection with customizable mitigation tracking (Wick Touch, 50% CE, Full Close)
Inverse FVGs (iFVG) — Identifies when FVGs fail and flip, creating new tradeable zones
Order Blocks (OB) — Last opposing candle before impulsive moves with adjustable impulse strength
Breaker Blocks (BB) — Automatically generated when Order Blocks fail
Rejection Blocks (RB) — Strong wick rejections indicating institutional defense
Volume Imbalances (VIMB) — Gaps between candle bodies showing aggressive institutional activity
📐 Market Structure & Liquidity
Market Structure Shifts (MSS) — Real-time detection of bullish/bearish structure breaks
Equal Highs/Lows (EQH/EQL) — Liquidity pools where stop losses accumulate
Buy-Side/Sell-Side Liquidity (BSL/SSL) — Swing point liquidity levels with sweep detection
Premium/Discount Zones — Visual shading showing institutional buying/selling areas
OTE Zone (61.8%-79%) — Optimal Trade Entry zone for high-probability entries
⏰ Time-Based Analysis
ICT Macro Times — All nine 30-minute algorithmic windows (02:45, 03:45, 04:45, 09:45, 10:45, 13:45, 14:45, 15:15, 15:45 NY Time)
Killzone Sessions — Asia, London, NY AM, NY PM with customizable times
Session Opens — Weekly, Monthly, Daily opening prices
Previous Period H/L — PDH/PDL, PWH/PWL, PMH/PML levels
📏 Dealing Ranges
Multi-Timeframe Ranges — 21-Day, 3-Day, Daily dealing ranges
Session Ranges — Asia, London, NY dealing ranges with equilibrium
Fibonacci Structure — 0%, 50% (EQ), 100% levels with P/D shading
🕯️ HTF Orderflow
Higher Timeframe Candles — Display up to 6 HTF candles with auto-timeframe selection
Candle Timer — Countdown to next HTF candle close
O/H/L Reference Lines — Current HTF open, high, low levels extended on chart
🎨 Visual Customization
5 Theme Presets — Dark Pro, Light Clean, Neon, Classic, Custom
Full Color Control — Customize every element individually
Zone Styles — Filled or Border Only options
Mitigation Effects — Visual fade when zones are mitigated
📋 Smart Dashboard
Real-Time Status — Structure bias, zone position, active session, OTE status
Confluence Score — Algorithmic scoring when multiple concepts align
Zone Counters — Active FVG, OB, BB, RB, VIMB, liquidity levels
3 Display Modes — Minimal, Compact, Detailed
🔔 Comprehensive Alert System
40+ Alert Conditions including:
FVG/OB/BB/RB/VIMB formation
Liquidity sweeps (EQH, EQL, BSL, SSL)
Market Structure Shifts
OTE zone entry
Macro time windows
Session opens
High confluence zones
Combo alerts (Macro + Confluence)
📖 How To Use
For Swing/Position Traders:
Enable HTF Orderflow to identify dominant trend direction
Use Dealing Ranges (3D, 21D) to find premium/discount zones
Look for OB/FVG confluence in discount (longs) or premium (shorts)
Confirm with MSS for trend alignment
For Day/Intraday Traders:
Mark the Asian Range during pre-market
Wait for London or NY AM Killzone
Enter during ICT Macro windows when price reaches FVG/OB in OTE zone
Target opposite liquidity (BSL for longs, SSL for shorts)
Confluence Trading:
Dashboard shows real-time confluence score
Score ≥ 3 indicates multiple ICT concepts aligned
Higher scores = higher probability setups
⚙️ Recommended Settings
Trading Style FVG Max OB Max History Bars HTF Candles
Scalping 3-5 2-3 100-200 3-4 Day Trading 5-8 3-5 200-400 4-5
Swing Trading 8-12 5-8 400-800 5-6
🎯 Best Practices
✅ Do:
Use HTF bias before taking LTF entries
Wait for Macro time windows for highest probability
Combine MSS + FVG/OB + OTE for A+ setups
Let mitigated zones fade (use Mitigation Fade setting)
❌ Avoid:
Trading against HTF structure
Entries outside Killzones (lower probability)
Ignoring liquidity targets
Over-cluttering chart (disable unused features)
📝 Version History
v6.0 (Current)
Complete rewrite in PineScript v6
Added ICT Macro Times with bracket/background styles
Enhanced confluence detection algorithm
Improved HTF candle rendering with multiple styles
Added Inverse FVG detection
Session-based Dealing Ranges
Performance optimizations
40+ alert conditions
⚠️ Disclaimer
This indicator is a technical analysis tool designed to visualize ICT/SMC concepts. It does not provide financial advice or guarantee profitable trades. Past performance is not indicative of future results. Always use proper risk management and trade responsibly.
💬 Support & Feedback
If you find this indicator valuable, please leave a comment or boost! Your feedback helps improve future updates.
Questions? Drop a comment below—I actively respond to all questions about the indicator's features and usage.
US Silver Coin Melt Value Lines (Spot-Based)This indicator calculates and plots the melt value of several historic U.S. silver coins based on the current spot price of silver. Each coin contains a known amount of silver, expressed in troy ounces. By multiplying the spot price by each coin’s silver weight, the script produces real‑time melt‑value lines that track the intrinsic metal value of each denomination.
Coins included:
- 90% Silver Dollar (Morgan/Peace)
- 90% Half Dollar
- 90% Quarter
- 90% Dime
- 40% Half Dollar (1965–1970)
- 35% Wartime Silver Nickel (1942–1945)
The indicator retrieves a dedicated silver spot symbol using request.security(), ensuring melt‑value lines remain correctly scaled regardless of the chart symbol. Each line is color‑coded and can optionally display a right‑edge label for quick identification.
Features:
- Real‑time melt‑value calculations based on spot silver
- Works on any chart symbol
- Optional right‑edge labels for each coin
- Clean, color‑matched visual layout
- Accurate silver weights for all included coins
This tool is intended for users who track bullion value, compare coin premiums, or study historical relationships between spot silver and U.S. coinage.
No external data sources, links, or promotional content are used.
Call the Curve #1 - Dynamic Renko Overlay StrategyBacktest looks phenomenal... but will the forward curve hold?
Poll your call below!
Welcome to "Call the Curve" – A New Educational Series
This is the first installment of a new public series I'm starting to help others (and myself) learn algorithmic trading the hard way: through transparent, real-time experimentation.
I'll be posting strategies with full backtests, equity curves, and forward-testing updates. The goal is educational – to reinforce what I'm learning, put ideas into practice publicly (accountability helps!), and show the reality of strategy development. Most beautiful backtests don't survive live markets... let's see which ones do.
You get to play along:
Predict the curve's future!
- Where will the equity be in 1 week?
- 1 month?
- 3 months?
- 6 months?
Drop your bold calls in the comments (e.g., "Up 15% in 1 month, then flatlines at 3 months"). I'll track the best predictions and cheer coins to the top prophets in future updates.
(Click "Strategy Report" above the chart to see the curve ^^^)
***Important disclaimer***: I will NOT recommend trading any of these strategies live until (and unless) they prove robust over at least 6 months of forward testing. This is purely educational and experimental. Past performance ≠ future results. Trade at your own risk.
Strategy Overview & How It Evolved
This script is a direct evolution of the basic Renko strategy I posted about a week ago (the simple alternating brick color entry system). I took that core idea and upgraded it significantly:
- Dynamic ATR-based brick sizing instead of fixed bricks → adapts to volatility
- Added overlay logic on regular candles for clearer visualization
- Proper risk management with fixed-dollar risk sizing
- Dual take-profit targets
- A safety killswitch
How the Strategy Works (Step by Step)
1. Chart Basis: Uses Renko bricks with brick size calculated dynamically from ATR (Average True Range). This makes the chart adapt to current volatility – larger bricks in wild markets, smaller in calm ones. Designed and tested on XRP/USD (crypto perpetuals or spot).
2. Entry Rule – Alternating Brick Confirmation:
The strategy waits for a clear trend reversal signal via alternating brick colors:
- For longs: A red (down) brick must fully form, followed by a green (up) brick. Entry on close of the confirming green brick.
- For shorts: A green (up) brick followed by a red (down) brick. Entry on close of the confirming red brick.
This filters out noise and only trades confirmed momentum shifts.
3. Stop Loss:
Placed at the low of the most recent brick (for longs) or high of the most recent brick (for shorts). Simple, logical, and directly tied to the Renko structure.
4. Position Sizing:
Fixed $1000 USD risk per trade. The script dynamically calculates the position size (quantity of XRP coins) based on the distance to the stop loss, ensuring every trade risks exactly $1000 regardless of volatility or stop distance.
5. Take Profit Targets:
Two partial exits for better reward capture:
- TP1: 50% of position closed at 1:1 risk-reward
- TP2: Remaining 50% closed at 2:1 risk-reward
This locks in profits early while letting the rest run.
6. Killswitch:
A global safety feature – if strategy loses X trades in a row, the strategy stops taking new trades until a winner forms. Prevents catastrophic losses during market shifts.
The result? A clean, adaptive Renko system that looks amazing in backtest... but we all know how that usually goes.
What do you think happens next? Moonshot continuation? Slow bleed? Epic collapse?
Make your call in the poll and comments. I'll post weekly forward-testing updates.
Let's see who calls the curve best.
Follow for the journey if you're into this kind of transparent algo experimentation.
(Not financial advice. For educational purposes only.)
Screenshot of curve Jan 15/25: img.sanishtech.com
ApexTrend Lite
ApexTrend Lite is a directional trend band indicator designed to show market structure, trend direction, and volatility in a simple visual form.
The indicator plots a single adaptive band that changes position based on trend conditions. In bullish markets, the band appears below price. In bearish markets, the band appears above price. During sideways or low-strength conditions, the band compresses near the trend average.
The band automatically expands when volatility and trend strength increase and contracts when conditions weaken. Color intensity reflects trend strength, helping distinguish strong trends from weak or choppy periods.
The band is anchored to candle extremes, ensuring it hugs price without gaps and accurately represents market structure. ApexTrend Lite does not repaint and works across all asset classes, including equities, indices, and commodities.
This is the Lite version focused on clean visual trend context
Smart Money Volume Scannerindicator for volume candles scanner. used for volume
Each bar represents total volume during that candle
Green = more volume on up candles
Red = more volume on down candles
SMC Rebalance to Equilibrium + ATR/ADX (Release)Markets spend more time rebalancing than trending. After an impulsive move, price naturally seeks fair value (equilibrium / mean / VWAP / 50%) where buyers and sellers agree again.
This makes rebalance trades higher win-rate and lower risk compared to continuation or breakout strategies.
Examples from real market behaviour:
- Gold futures (GC) rebalance very frequently because gold is heavily mean-reverted by institutions and hedgers. Roughly 60–70% of intraday moves show some form of rebalance.
- Nasdaq (NQ) is momentum-dominant, but even then 45–55% of intraday extensions rebalance, especially outside NY Open.
- FCPO is strongly controlled and rotational, with 70–80% of moves showing rebalance behaviour, especially outside aggressive news flows.
What each candle label means in this indicator
This indicator labels ATR state per candle to read market intent:
E (Expansion) - Volatility increasing. Aggressive participation. Used to drive price, not to rebalance.
S (Strong) - Sustained momentum. Trend still active.
D (Decreasing) - Volatility contracting. Acceptance forming. This is the core condition for rebalance.
W (Weak) represents very low momentum and temporary hesitation. W means the market is unsure.
Indicator features explained
This indicator is designed to be simple, objective, and rule-based:
Candle labels show real-time ATR state (E / S / D / W)
Strong rebalance condition is highlighted when D-D-D forms
Filters avoid signals during ADX expansion
Designed specifically for SMC rebalance to equilibrium, not continuation
Alerts trigger only when valid rebalance conditions appear, helping traders avoid over-trading and impulsive entries
Why D-D-D is very important?
Three consecutive D candles (D-D-D) mean:
- Volatility has contracted for multiple closes
- Chasers are gone
- Order flow is absorbed
- Market accepts current price as unfair
This is the strongest condition for price to return to equilibrium and sometimes continue further to MRH / MRL instead of stopping at 50%.
Important: One or two D candles are not enough. D-D-D confirms acceptance, not just a pause
Why NOT to trade rebalance when ADX is expanding
ADX expansion means trend strength is increasing. When ADX is expanding:
- Decreasing ATR often means reload, not reversal
- Price is being delivered, not balanced
- Rebalance attempts usually fail
This indicator filters out rebalance signals when ADX shows expansion because trend strength overrides balance logic.
Why price can rebalance without taking liquidity
A liquidity sweep is not required for rebalance.
Rebalance happens because acceptance changes, not because stops are hunted.
Price returns to equilibrium when:
- Momentum fades
- Volatility contracts
- Participation drops
- Passive orders dominate
Liquidity sweeps only make the move faster, not necessary. This is why rebalances commonly happen in Asian session, late US session, and mid-range conditions without any obvious stop-run.
Best time to trade rebalance (US & Malaysia time)
Rebalance works best when liquidity is stable or decaying, not expanding.
Best for Gold (GC)
- US Late Session: 11:30 pm – 2:00 am MYT
- Asian Morning: 7:00 am – 11:00 am MYT
Best for Nasdaq (NQ)
- US Late Session only: 11:30 pm – 1:30 am MYT
Avoid for all markets
- NY Open impulse: 8:30 pm – 10:30 pm MYT
This is delivery time, not balance time.
Core idea to remember
Rebalance trading is not about predicting reversals. It is about waiting for acceptance.
Liquidity makes moves fast. Acceptance makes moves possible. This indicator exists to help you trade what markets do most of the time — rebalance back to fair value — with discipline and structure
