10 Youtube Opening Range Strategies + Backtest 1. Quick Flip Scalper
A strategy centered on fading or following the initial move relative to the Opening Range (OR).
LONG Rules:
Reversal Mode: If the Opening Range is Bearish (Red), enter Long when price drops below the Opening Range Low (ORL).
Continuity Mode: If the Opening Range is Bullish (Green), enter Long when price drops below the Opening Range Low (ORL) (Buying the deep pullback/trap).
SHORT Rules:
Reversal Mode: If the Opening Range is Bullish (Green), enter Short when price breaks above the Opening Range High (ORH).
Continuity Mode: If the Opening Range is Bearish (Red), enter Short when price breaks above the Opening Range High (ORH) (Selling the deep pullback/trap).
2. First Candle Scalper
Identical to the Quick Flip Scalper but restricts entries to the very first retest only.
LONG Rules:
Same as Quick Flip Long, but only triggers once per session.
SHORT Rules:
Same as Quick Flip Short, but only triggers once per session.
3. Smart Money Trap (SMT)
Identifies a "fakeout" breakout followed immediately by a reversal candlestick pattern.
LONG Rules:
Condition: The previous candle low was below the ORL, but the candle closed back inside (above ORL).
Trigger: Must have a Bullish Engulfing or Bullish Rejection pattern closing above the ORL.
SHORT Rules:
Condition: The previous candle high was above the ORH, but the candle closed back inside (below ORH).
Trigger: Must have a Bearish Engulfing or Bearish Rejection pattern closing below the ORH.
4. Trident Pattern (TG Capital)
A London-session exclusive strategy requiring a Fair Value Gap (FVG) and a Doji confirmation.
LONG Rules:
Filter: Price is Above the 200 EMA (if enabled).
Setup: A Bullish FVG forms.
Confirmation: A Doji candle wicks down into the 50% level of the FVG.
Trigger: Enter on the next candle close.
SHORT Rules:
Filter: Price is Below the 200 EMA (if enabled).
Setup: A Bearish FVG forms.
Confirmation: A Doji candle wicks up into the 50% level of the FVG.
Trigger: Enter on the next candle close.
5. OTE Framework (MBB Trader)
Simulates an Optimal Trade Entry by combining a Liquidity Sweep with a Market Structure Shift (SMR).
LONG Rules:
Sweep: Price drops below the lowest low of the last 20 candles.
Structure: A Bullish SMR forms (Low → High → Lower Low → Higher High).
SHORT Rules:
Sweep: Price breaks above the highest high of the last 20 candles.
Structure: A Bearish SMR forms (High → Low → Higher High → Lower Low).
6. Liquidity Trap (Marco Trades)
A contrarian strategy that buys/sells purely on sweeps of major structural levels.
LONG Rules:
Trigger: Price sweeps (drops below) the lowest low of the last 50 candles.
SHORT Rules:
Trigger: Price sweeps (breaks above) the highest high of the last 50 candles.
7. Trojan Horse (Trader Mayne)
Uses Trend EMAs (50 & 200) to identify direction, then enters on a Lower Timeframe Breaker.
LONG Rules:
Trend: 50 EMA > 200 EMA (Uptrend).
Trigger: Price sweeps a recent 10-candle low, then immediately breaks a recent 5-candle high.
SHORT Rules:
Trend: 50 EMA < 200 EMA (Downtrend).
Trigger: Price sweeps a recent 10-candle high, then immediately breaks a recent 5-candle low.
8. Simplified SMT (9:30 Range)
Focuses on the 9:30 AM range. Waits for a breakout and a confirmed failure to sustain it.
LONG Rules:
Context: Price previously broke above the ORH.
Trigger: Price returns to the ORH (Retest) with a Bullish Engulfing/Rejection pattern.
SHORT Rules:
Context: Price previously broke below the ORL.
Trigger: Price returns to the ORL (Retest) with a Bearish Engulfing/Rejection pattern.
9. 9:30 One-Candle (Scarface)
Uses the high/low of the single 9:30 candle as the range.
LONG Rules:
Setup: Price closes above the 9:30 High.
Trigger: Price pulls back and touches/dips into the 9:30 High (Retest).
SHORT Rules:
Setup: Price closes below the 9:30 Low.
Trigger: Price pulls back and touches/wicks into the 9:30 Low (Retest).
10. London Breakout (Joovier)
Based on the 3 AM - 9 AM EST box.
LONG Rules:
Trigger: A candle's Body (Open and Close) forms completely above the Box High after the session opens.
SHORT Rules:
Trigger: A candle's Body (Open and Close) forms completely below the Box Low after the session opens.
⚠️ DISCLAIMER & LIMITATION OF LIABILITY
1. NO AFFILIATION / INDEPENDENT PROJECT This script is an independent coding project created solely for testing, research, and entertainment purposes. The creator of this indicator is not associated, affiliated, endorsed by, or in any way connected to the strategy authors or influencers mentioned within the tool (including but not limited to TG Capital, MBB Trader, Marco Trades, Trader Mayne, Scarface, or Joovier).
The strategy names are used strictly for identification purposes to credit the original concept creators.
This code represents an independent interpretation of public trading concepts. It may not reflect the exact, proprietary, or private methods taught by these individuals.
This is not an official product from any of the aforementioned parties.
2. FOR EDUCATIONAL PURPOSES ONLY This indicator is strictly for educational and informational purposes. It is not a signal service and does not constitute investment, financial, or trading advice. The buy/sell labels generated by this script are merely visual representations of specific code logic and should not be interpreted as instructions to execute trades.
3. EXCLUSION OF LIABILITY By using this script, you explicitly agree that:
The creator assumes no responsibility or liability for any direct, indirect, consequential, or incidental losses or damages resulting from the use of this tool.
You engage in trading entirely at your own risk.
You release the creator from any legal responsibility regarding your trading activities or financial results.
4. HYPOTHETICAL PERFORMANCE The statistics displayed on the "Dashboard" (Win Rate, P&L, etc.) are hypothetical and based on historical backtesting data.
Past performance is not indicative of future results.
These results do not account for slippage, spreads, commission fees, or real-time liquidity issues.
Strategies that performed well in the past may fail in current or future market conditions.
5. HIGH-RISK WARNING Trading in financial markets (Stocks, Forex, Crypto, Futures) involves a high degree of risk and is not suitable for all investors. You could lose some or all of your initial investment. You should not trade with money that you cannot afford to lose.
IF YOU DO NOT AGREE WITH THESE TERMS, DO NOT USE THIS SCRIPT.
Educational
MVRV Ratio Indicator [captainua]MVRV Ratio Indicator - Market Value to Realized Value Ratio
Overview
This professional indicator calculates and visualizes the MVRV (Market Value to Realized Value) ratio (raw, non-Z-score) with optional MVRV-Z overlay, comparing current market capitalization to realized capitalization to help identify potential market tops and bottoms for cryptocurrency markets.
Unlike MVRV-Z which normalizes the ratio using standard deviation (creating a Z-score), the raw MVRV ratio provides direct comparison between market cap and realized cap. This indicator enhances the raw ratio with historical percentile bands, percentile rank calculation, divergence detection, historical event logging, dynamic color gradients, enhanced visualization options, optional MVRV-Z comparison, and NEW advanced metrics including Risk Score, MVRV Momentum, Time in Zone tracking, and Price Target calculations.
NEW Features in This Version:
• Risk Score (0-100): Composite indicator based on MVRV level and percentile rank for instant risk assessment
• MVRV Momentum: Rate of change indicator showing trend direction (↑ Increasing, ↓ Decreasing, → Flat)
• Time in Zone: Tracks how long MVRV has been in the current zone (top/bottom/neutral) in bars
• Price Targets: Calculates price levels at key MVRV thresholds (fair value, top, bottom)
• Input Validation: Warns about invalid parameter combinations (e.g., extreme thresholds out of order)
• Multiple Smoothing Options: SMA, EMA, WMA, RMA for noise reduction
• Performance Optimized: Cached request.security() calls, ta.percentrank() for efficiency
• Human-Readable Timestamps: Event log now shows dates (YYYY-MM-DD) instead of bar indices
Core Calculations
MVRV Ratio Calculation:
The script calculates MVRV ratio using the standard formula: MVRV Ratio = Market Cap / Realized Cap. This formula provides a direct ratio without normalization, showing how many times the current market cap exceeds (or falls below) the realized cap.
Market Capitalization (Market Cap): The total market value of all coins in circulation, calculated as current price × circulating supply. This represents the market's current valuation of the asset.
Realized Capitalization (Realized Cap): The sum of the value of each coin when it last moved on-chain, representing the average cost basis of all coins.
Raw Ratio Interpretation:
- Ratio > 3.5: Extreme overvaluation (market cap significantly above realized cap)
- Ratio 2.5-3.5: Moderate overvaluation
- Ratio 1.0-2.5: Fair value to moderate overvaluation
- Ratio 0.8-1.0: Fair value to moderate undervaluation
- Ratio < 0.8: Undervaluation (market cap close to or below realized cap)
Risk Score (NEW):
Composite risk indicator ranging from 0-100:
- 80-100: Very High Risk (extreme overvaluation)
- 60-80: High Risk (overvaluation)
- 40-60: Moderate Risk (fair value range)
- 20-40: Low Risk (undervaluation)
- 0-20: Very Low Risk (extreme undervaluation)
The risk score uses percentile rank when available, or normalizes MVRV ratio to the 0-100 scale based on configured thresholds.
MVRV Momentum (NEW):
Rate of change indicator showing trend direction:
- ↑ Increasing: MVRV ratio rising (momentum > 0.01)
- ↓ Decreasing: MVRV ratio falling (momentum < -0.01)
- → Flat: MVRV ratio stable
- Displays percentage change over configurable period (default: 14 bars)
Time in Zone (NEW):
Tracks duration in current zone:
- Top Zone: Bars spent above top threshold (3.5)
- Bottom Zone: Bars spent below bottom threshold (0.8)
- Neutral Zone: Bars spent between thresholds
- Resets when zone changes
- Helps identify prolonged extreme conditions
Price Targets (NEW):
Calculates price levels at key MVRV thresholds:
- Price @ Fair Value: Price when MVRV = 1.0
- Price @ Top Threshold: Price when MVRV = 3.5
- Price @ Bottom Threshold: Price when MVRV = 0.8
- Based on estimated realized price (current price / MVRV ratio)
Data Source Selection:
The indicator supports multiple data source options for maximum flexibility:
Glassnode (Recommended):
- Uses Glassnode Market Cap data
- Calculates MVRV from Market Cap / Realized Cap
- Symbol format: GLASSNODE:{TOKEN}_MARKETCAP
- Requires Glassnode data subscription
- Also requires CoinMetrics for Realized Cap
- Best for comprehensive analysis with MVRV-Z comparison
IntoTheBlock:
- Direct MVRV ratio data from IntoTheBlock
- Simplest option - no calculations required
- Works for BTC and other supported tokens
- Symbol format: INTOTHEBLOCK:{TOKEN}_MVRV
- Requires IntoTheBlock data subscription on TradingView
Historical Percentile Bands:
The indicator calculates rolling percentile bands over a configurable period (default: 500 bars):
- 5th Percentile: Very low historical values (extreme undervaluation range)
- 25th Percentile: Lower quartile (undervaluation range)
- 50th Percentile: Median (fair value center)
- 75th Percentile: Upper quartile (overvaluation range)
- 95th Percentile: Very high historical values (extreme overvaluation range)
Percentile bands use ta.percentile_nearest_rank() for efficient calculation.
Percentile Rank:
Percentile rank shows where the current MVRV ratio sits in the historical distribution (0-100%):
- 0-25%: Bottom quartile (undervaluation)
- 25-50%: Lower half (moderate undervaluation to fair value)
- 50-75%: Upper half (fair value to moderate overvaluation)
- 75-100%: Top quartile (overvaluation)
Now uses efficient ta.percentrank() instead of array-based calculation.
Input Validation (NEW):
The indicator validates input parameters and displays warnings for:
- Extreme High Threshold should be > Top Threshold
- Extreme Low Threshold should be < Bottom Threshold
- Min Lookback Range must be < Max Lookback Range
- Top Threshold should be > Moderate Overvalued
- Moderate Overvalued should be > Fair Value
- Fair Value should be > Bottom Threshold
- Rapid Increase Threshold should be > 0
- Rapid Decrease Threshold should be < 0
Smoothing Options (Enhanced):
Multiple smoothing types available:
- SMA: Simple Moving Average (equal weight)
- EMA: Exponential Moving Average (more weight to recent)
- WMA: Weighted Moving Average (linear weight)
- RMA: Running Moving Average (Wilder's smoothing)
Reference Levels
Overvalued (Potential Top) - 3.5:
The 3.5 level indicates potentially extreme overvaluation. When MVRV ratio exceeds this threshold:
- Market cap is significantly above realized cap
- Potential selling opportunities for profit-taking
- Risk of market corrections or reversals
- Risk Score typically >80 (Very High Risk)
Moderately Overvalued - 2.5:
The 2.5 level indicates moderate overvaluation:
- Market cap is above realized cap but not extreme
- Caution warranted but not necessarily sell signal
- Risk Score typically 60-80 (High Risk)
Fair Value - 1.0:
The 1.0 level indicates fair valuation:
- Market cap equals realized cap
- Balanced market conditions
- Risk Score typically 40-60 (Moderate Risk)
Undervalued (Potential Bottom) - 0.8:
The 0.8 level indicates potentially undervalued conditions:
- Market cap is close to or below realized cap
- Potential buying opportunities for accumulation
- Risk Score typically <40 (Low Risk)
Visual Features
MVRV Ratio Line:
The main indicator line displays the calculated MVRV ratio with dynamic color gradient:
- Bright Red: Extreme overvaluation (ratio ≥ top threshold + 0.5)
- Orange: High overvaluation (ratio ≥ top threshold)
- Cornflower Blue: Neutral/Fair value (around fair value level)
- Deep Sky Blue: Low/Undervaluation (ratio ≤ bottom threshold)
- Bright Green: Extreme undervaluation (ratio ≤ bottom threshold - 0.1)
Can also be displayed as histogram/bar chart.
Historical Percentile Bands:
Five percentile bands with optional fills:
- 5th Percentile (Blue): Very low historical range
- 25th Percentile (Blue): Lower quartile
- 50th Percentile (Gray): Historical median
- 75th Percentile (Orange): Upper quartile
- 95th Percentile (Red): Very high historical range
Reference Lines:
Horizontal reference lines at key levels (all customizable):
- Top Threshold (default 3.5): Purple/violet
- Moderate Overvalued (default 2.5): Orange
- Fair Value (1.0): Gray
- Bottom Threshold (default 0.8): Blue
Background Highlights:
Optional background color highlights:
- High Zone (Maroon/Red): MVRV ratio ≥ top threshold
- Low Zone (Green): MVRV ratio ≤ bottom threshold
Divergence Detection:
Advanced divergence detection between price and MVRV ratio:
- Regular Bullish Divergence: Price lower low + MVRV higher low
- Regular Bearish Divergence: Price higher high + MVRV lower high
- Hidden Bullish Divergence: Price higher low + MVRV lower low
- Hidden Bearish Divergence: Price lower high + MVRV higher high
- Visual markers with icons (🐂/🐻) and connecting lines
Historical Event Log (Enhanced):
Comprehensive event tracking:
- Tracks zone entries/exits, extreme values, cross events
- Now displays human-readable dates (YYYY-MM-DD) instead of bar indices
- Color-coded events (red for top/high, green for bottom/low)
- Configurable log size (5-50 events)
Information Table (Enhanced):
Comprehensive on-chart table with NEW metrics:
Current Values:
- MVRV Ratio: Current ratio value
- Percentile Rank: Position in historical distribution (0-100%)
- Risk Score (NEW): Composite risk indicator (0-100) with risk level
- Market Status: Current market condition
- Signal: Trading signal (Strong Buy/Buy/Hold/Sell/Strong Sell)
- MVRV Momentum (NEW): Trend direction with percentage change
- Time in Zone (NEW): Current zone and duration in bars
Price Information (Enhanced):
- Current Price: Current market price
- Est. Realized Price: Estimated realized price
- Price @ Fair Value (NEW): Price when MVRV = 1.0
- Price @ Top Threshold (NEW): Price when MVRV = 3.5
- Price @ Bottom Threshold (NEW): Price when MVRV = 0.8
Other Metrics:
- Percentile Bands: Range from 5th to 95th percentile
- MVRV-Z Score: Z-score value (when comparison enabled)
- Change (1D/1W/1M): Ratio change over timeframes
- To Top/Bottom: Percentage distance to key levels
- Historical Range: Percentage below ATH / above ATL
- 30D Volatility: Standard deviation
Historical Event Log:
- Recent events with dates and values
- Color-coded for quick identification
Alert System
Comprehensive alerting capabilities:
Zone Alerts:
- Top Zone Entry/Exit
- Bottom Zone Entry/Exit
Cross Alerts:
- Cross Above/Below Top Threshold
- Cross Above/Below Fair Value (1.0)
Extreme Value Alerts:
- Extreme High (configurable, default: 4.5)
- Extreme Low (configurable, default: 0.7)
Rate of Change Alerts:
- Rapid Increase/Decrease
Divergence Alerts:
- Bullish/Bearish Divergence
- Hidden Bullish/Bearish Divergence
All alerts support cooldown to prevent spam.
Usage Instructions
Getting Started:
1. Select data source (Glassnode recommended)
2. Enable Risk Score for composite risk assessment (0-100)
3. Enable MVRV Momentum to track trend direction
4. Enable Time in Zone to see zone duration
5. Enable Price Targets to see price levels at key thresholds
6. Use weekly timeframe for cleaner signals
Risk-Based Position Sizing:
Use Risk Score to guide position sizing:
- Risk Score >80 (Very High Risk): Reduce/exit positions
- Risk Score 60-80 (High Risk): Smaller positions, caution
- Risk Score 40-60 (Moderate Risk): Normal positions
- Risk Score 20-40 (Low Risk): Larger positions opportunity
- Risk Score <20 (Very Low Risk): Strong accumulation zone
Momentum-Based Analysis:
Use MVRV Momentum for trend confirmation:
- ↑ Increasing + High MVRV: Late bull market, caution
- ↑ Increasing + Low MVRV: Recovery phase, bullish
- ↓ Decreasing + High MVRV: Distribution, potential top
- ↓ Decreasing + Low MVRV: Capitulation, accumulation opportunity
Zone Duration Analysis:
Use Time in Zone for context:
- Extended time in Top Zone: Late cycle, increased reversal risk
- Extended time in Bottom Zone: Accumulation opportunity
- Quick zone transitions: Higher volatility regime
Price Target Usage:
Use Price Targets for planning:
- Price @ Fair Value: Natural equilibrium level
- Price @ Top Threshold: Potential distribution target
- Price @ Bottom Threshold: Potential accumulation target
Technical Specifications
- Pine Script Version: v6
- Indicator Type: Non-overlay (displays in separate panel)
- Repainting Behavior: Minimal - calculations based on confirmed bar data
- Performance: Optimized with cached request.security() calls and ta.percentrank()
- Input Validation: Validates parameter combinations with warnings
- Compatibility: Works on all timeframes (data sources provide daily resolution)
- Edge Case Handling: Zero-division protection, NA value handling, boundary checks
Performance Optimizations:
- Cached request.security() calls for Market Cap, Realized Cap, and IntoTheBlock data
- Efficient ta.percentrank() replaces array-based percentile calculation
- Consolidated duplicate code (color functions, state tracking)
- Single-line ternary expressions for Pine Script compatibility
Constants:
- MAX_HISTORY_BARS = 5000 (TradingView's limit)
- PERCENTILE_EXTREME_HIGH = 90.0
- PERCENTILE_HIGH = 75.0
- PERCENTILE_MID = 50.0
- PERCENTILE_LOW = 25.0
- MIN_PERCENTILE_SAMPLES = 10
- DEFAULT_VOLATILITY_HIGH = 0.1
Known Limitations
- Data availability: Requires valid data subscription (IntoTheBlock, Glassnode, or CoinMetrics)
- Token support: Works with tokens supported by the selected data source
- Historical data: Percentile calculations require sufficient history (200+ bars recommended)
- Timeframe: Always uses daily resolution data from providers; works on all chart timeframes
- History limit: All lookback periods capped at 5000 bars
Changelog
Latest Version:
- Added Risk Score (0-100) composite indicator
- Added MVRV Momentum with trend direction
- Added Time in Zone tracking
- Added Price Target calculations
- Added Input Validation with warnings
- Added multiple smoothing options (SMA, EMA, WMA, RMA)
- Improved performance with cached security calls
- Replaced array-based percentile with ta.percentrank()
- Human-readable timestamps in event log (YYYY-MM-DD)
- Fixed hline() conditional value bug
- Consolidated duplicate code
- Updated indicator name for clarity
For detailed usage instructions, see the script comments.
Kalman Hull Bands For Loop | RakoQuant Kalman Hull Bands For Loop | RakoQuant
RakoQuant | Kalman Hull Bands For Loop is a trend-following breakout + regime tool built to keep you on the right side of the market with clean structure and minimal noise. It combines a Kalman Filter (noise reduction), a Hull Moving Average baseline (responsive trend anchor), and a standard deviation envelope computed via a for-loop (robust rail bands) to define actionable bullish and bearish regimes.
What it does
This indicator builds a dynamic “rail system” around price:
Kalman Filtered Source → reduces measurement noise in the input series.
Hull Baseline (HMA) → fast trend baseline built on the Kalman-filtered source.
Deviation Bands (“Rails”) → upper/lower rails based on a loop-calculated standard deviation.
Regime Breakout Logic → trend regime flips only when price breaks out beyond the rails:
Bullish regime when close crosses above the upper rail
Bearish regime when close crosses below the lower rail
Once a regime is established, the tool highlights the active rail in bright neon and fades the inactive rail (optional), giving you a clear “trend corridor” and a strong visual state.
Key Features
1) Kalman Noise Filtering (R & Q)
The Kalman filter smooths the selected source using:
R (Measurement Noise) – how noisy you assume the observations are
Q (Process Noise) – how quickly the model is allowed to adapt
This helps reduce chop without turning the indicator into a laggy moving average.
2) Hull Baseline (fast + smooth)
The baseline is a Hull Moving Average applied to the Kalman-filtered source:
responsive in trend,
cleaner during transitions,
ideal for breakout regime detection.
3) Deviation Envelope with Two Modes
Deviation rails are calculated using a for-loop standard deviation (population stdev), with two choices:
Residual vs Baseline (default): deviation of (src - baseline)
→ focuses on “distance from fair value” instead of raw price volatility
Raw Source: deviation of the source itself
→ classic volatility envelope behavior
Then bands are formed by:
upper = baseline + mult * sd
lower = baseline - mult * sd
4) Regime Rails + Candle Painting (RakoQuant Neon)
Bull regime: active lower rail plotted in Neon Aqua
Bear regime: active upper rail plotted in Neon Magenta
Candles are painted to match the current state (optional)
Inactive rails can be shown faintly for context.
5) Alerts for Breakouts
Built-in alerts trigger exactly on regime flips:
Bull Breakout (close crosses above upper rail)
Bear Breakout (close crosses below lower rail)
How to Use It
Trend-following approach
Stay with the active regime until a breakout flip occurs.
In bull regime, the lower rail behaves like an adaptive trend support guide.
In bear regime, the upper rail behaves like an adaptive trend resistance guide.
Breakout confirmation
Use the breakout as a confirmation layer with your other confluences:
take longs only after a bull breakout,
take shorts only after a bear breakout,
filter mean-reversion trades by the regime state.
Inputs Summary
Source: select what the model tracks (default: high)
Kalman: R / Q controls smoothing vs responsiveness
Baseline: Hull length
Deviation: loop length, mode (Residual vs Baseline / Raw Source), multiplier
Visuals: candle painting, baseline visibility, inactive rails
Disclaimer
Backtests are based on historical data and are not indicative of future performance.
:
Short Option Intrinsic + Option Price + Time ValueThis code print out and plot the intrinsic values, time values and the option price on the screen. This tells your how likely a short option will be exercised. User needs to select the option type (call, or put). Then input strike price and the current option price.
Risk & Lot Calculator PanelFXMANS Risk & Lot Panel
Smart Risk Management Tool for TradingView
- Overview
FXMANS Risk & Lot Panel is a lightweight and professional risk management tool designed to help traders calculate position size (lot) and take-profit levels directly on the chart, without cluttering the screen.
The panel is displayed as a minimal table in the top-right corner of the chart and automatically adapts to the currently opened symbol.
This tool focuses on clarity, precision, and usability, making it suitable for scalpers, day traders, and swing traders.
- Key Features
Automatic Direction Detection
The script can automatically determine BUY or SELL direction based on:
Entry Price
Stop Loss Price
Logic:
Stop Loss below Entry → BUY
Stop Loss above Entry → SELL
Manual override is available if auto direction is disabled.
Risk-Based Lot Size Calculation
Calculates position size based on:
User-defined risk amount in USD
Distance between Entry and Stop Loss
Symbol-specific tick size and point value
Ensures consistent risk management across all markets.
Automatic Take Profit (RR Based)
Take Profit is calculated automatically using a predefined Risk / Reward (RR) ratio.
Supports both BUY and SELL scenarios.
- Symbol-Aware Calculation
Uses TradingView’s built-in symbol properties:
syminfo.mintick
syminfo.pointvalue
Works correctly on:
Forex
Indices
Metals
Crypto
- Minimal & Non-Intrusive UI
Small, fixed panel located at the top-right corner
Designed to avoid covering price action
Clean FXMANS-style color palette
- Safe Panel Size Control
Panel size can be adjusted from settings:
Small
Medium
Large
Size changes are handled without modifying layout geometry, preventing UI bugs.
- How It Works
Enter your Entry Price and Stop Loss Price
Define your Risk Amount ($)
Set your desired Risk / Reward ratio
The script automatically calculates:
Trade Direction (BUY / SELL)
Lot Size
Take Profit Level
All results are displayed instantly in the panel
- Example Use Case
Risk: $100
Entry: 1.0850
Stop Loss: 1.0800
RR: 2.0
- The panel will automatically display:
Direction: BUY
Lot Size adjusted to risk exactly $100
Take Profit at 2R
- Important Notes
Entry and Stop Loss prices must be valid (greater than zero).
The tool does not place trades automatically.
Calculations are for position sizing only and may vary slightly depending on broker specifications.
- Disclaimer
This script is intended for educational and analytical purposes only.
Trading involves risk, and users are responsible for their own trading decisions.
- Ideal For
Traders who follow strict risk management rules
Forex, crypto, and index traders
Scalpers and intraday traders
Anyone who wants clean and fast position sizing on TradingView
IU Time SessionsDISCRIPTION
IU Time Sessions is a multi–market session indicator designed to visually highlight major global trading sessions directly on your chart.
It helps traders easily identify when Tokyo, London, New York, and Sydney sessions are active based on their selected time zone.
The indicator automatically adjusts session timings according to the chosen time zone, making it extremely useful for traders across different countries.
Each session is displayed with a customizable background color, allowing you to instantly recognize market behavior, volatility changes, and session overlaps.
In addition, session start alerts can be enabled so traders never miss the opening of important market hours.
USER INPUTS :
• Select Your Time Zone
Allows users to choose their local or preferred market time zone for accurate session calculation.
• Background Color Transparency
Adjust the transparency level of session background colors for better chart visibility.
• Enable / Disable Individual Sessions
Users can turn ON or OFF:
* Tokyo Session
* London Session
* New York Session
* Sydney Session
• Session Time Settings
Each session has customizable start and end times.
• Session Colors
Each trading session has its own selectable background color.
• Session Alerts
Optional alerts for:
* Tokyo session start
* London session start
* New York session start
* Sydney session start
WHY IT IS UNIQUE:
• Fully time-zone adaptive (works globally)
• Supports all major forex and crypto trading sessions
• Clean background visualization without clutter
• Custom session timing flexibility
• Individual session enable/disable control
• Session start alerts without repainting
• Works on all timeframes
• Lightweight and optimized Pine Script v6 code
Unlike basic session indicators, this tool focuses on clarity, flexibility, and accurate time-zone conversion — making it suitable for both beginners and professional traders.
HOW USER CAN BENIFIT FROM IT :
• Easily identify high-liquidity market hours
• Understand session-based price behavior
• Spot session overlaps for increased volatility
• Improve timing for entries and exits
• Avoid low-volume trading periods
• Use alerts to stay disciplined and prepared
• Suitable for forex, crypto, indices, and commodities
This indicator helps traders align their strategies with institutional trading hours and make better-timed trading decisions.
Lanovyx# Lanovyx — Setup Window Confluence System
## The Problem This Solves
Traditional confluence indicators require all conditions to align on the exact same bar: stochastic must be oversold AND price must touch support AND divergence must form — all simultaneously. In real markets, this rarely happens. Price touches VWAP -2σ, but stochastic doesn't reach oversold until 3 bars later. The opportunity is missed.
**Lanovyx solves this with the Setup Window methodology.**
---
## Core Innovation: Setup Windows
Instead of requiring simultaneous conditions, Lanovyx separates trading signals into two phases:
**Phase 1 — Context Event (Setup Activation)**
When a meaningful event occurs, it "opens a window" that stays active for a configurable number of bars:
- Price touches VWAP ±2σ or ±3σ band → window opens
- Price tests Previous Day High/Low → window opens
- Stochastic divergence forms → window opens
- Opening Range breakout occurs → window opens
- Price reaches Support/Resistance level → window opens
Each event adds to a cumulative "setup score" (capped at 8). Higher scores indicate stronger context.
**Phase 2 — Trigger (Signal Generation)**
Within the active window, when stochastic conditions confirm, a signal fires. The trigger doesn't need to occur on the same bar as the context — it just needs to occur while the window is open.
This two-phase approach captures setups that traditional indicators miss entirely.
---
## Why Stochastic + VWAP Confluence Works
**VWAP (Volume-Weighted Average Price)** tells us where institutional money has transacted. The standard deviation bands identify statistical extremes:
- Price at VWAP -2σ is extended to the downside (potential mean reversion long)
- Price at VWAP +2σ is extended to the upside (potential mean reversion short)
**Stochastic Oscillator** measures momentum exhaustion. When price reaches a VWAP extreme AND stochastic shows momentum reversing, we have confluence of:
1. Price extension (VWAP bands)
2. Momentum exhaustion (Stochastic)
3. Context validation (Setup Window score)
The multi-lane stochastic (14/21/55 periods) adds timeframe confluence — when fast, medium, and slow stochastics align, the signal is stronger.
---
## Five Signal Families
Each family targets a specific market condition:
### 1. Trend Entry (T) — Blue Labels
**When:** Stochastic pulls back to 25-55 zone (longs) or 45-75 zone (shorts) during established trend
**Logic:** In trending markets, pullbacks to the "value zone" offer low-risk entries with trend
**Best for:** Trending days with clear directional bias
### 2. Mean Reversion (R) — Green/Red Labels
**When:** Stochastic exits oversold (<20) or overbought (>80) with active setup window
**Logic:** At VWAP extremes with momentum exhaustion, price tends to revert to mean
**Best for:** Range-bound, choppy markets
**Requires:** Active setup window (context event must have occurred)
### 3. Breakout (B) — Orange Labels
**When:** Stochastic lanes compress ("coil") then expand, crossing the 50 midline
**Logic:** Compression precedes expansion; breakout from tight range signals new trend
**Best for:** Transition days, post-squeeze moves
### 4. Momentum (M) — Green/Red Labels
**When:** Stochastic crosses 50 from extreme zone (<25 or >75) within lookback period
**Logic:** Catches V-shaped reversals where regime detection lags the move
**Best for:** Fast reversals, news-driven moves
### 5. Counter-Signal / FADE (C) — Purple Labels
**When:** A signal fires and immediately fails (stochastic reverses sharply against it)
**Logic:** Failed signals often lead to strong moves in the opposite direction (trapped traders)
**Confidence gating:** High-confidence fades generate signals; low-confidence show warnings only
---
## Institutional Key Levels
Lanovyx incorporates levels that institutional traders use:
- **PDH/PDL** (Previous Day High/Low) — Major support/resistance where stops cluster
- **PDC** (Previous Day Close) — Settlement price, gap reference
- **ORB** (Opening Range) — First 15 minutes high/low, breakout trigger
- **IB** (Initial Balance) — First 60 minutes range, institutional benchmark
These levels automatically activate setup windows when price interacts with them, adding to the setup score.
---
## Filtering System
**ADX Filter:** In strong trends (ADX > 25), blocks counter-trend mean reversion signals to avoid fighting momentum.
**HTF Bias Filter:** Optional alignment with higher timeframe (e.g., 1-hour) EMAs. Can block or demote signals that oppose the larger trend.
**Regime Detection:** Classifies market as Uptrend, Downtrend, Sideways, or Squeeze using EMA alignment and market structure (HH/HL/LH/LL patterns).
---
## How to Use
1. **Wait for Setup** — Watch for context events (VWAP band touch, key level test, divergence)
2. **Check the Score** — Higher setup scores indicate stronger context (visible in debug mode)
3. **Wait for Trigger** — Let stochastic confirm within the window
4. **Confirm Regime** — Ensure signal type matches market condition
5. **Manage Risk** — Use the ATR-based stop/target levels shown after signals
**Strong signals (★)** appear when multiple confluence factors align — these are highest probability setups.
---
## Settings Overview
| Setting | Default | Purpose |
|---------|---------|---------|
| Setup Window | 10 bars | How long context events stay active |
| Entry Zone | 25-55 | Stochastic zone for trend pullback entries |
| OS/OB Levels | 20/80 | Stochastic extremes for mean reversion |
| Stop Loss | 1.5 ATR | Risk management distance |
| Target 1 | 2.0 ATR | First profit target (1.33:1 R:R) |
Recommended timeframes: 5-minute and 15-minute charts.
---
## Disclaimer
This indicator is for educational purposes only and does not constitute financial advice. Past performance does not guarantee future results. Always use proper risk management and never risk more than you can afford to lose. No indicator can predict the future — use this as one input in your trading decision process, not as a standalone system.
Universe_PRMP (Universe_Professional Risk Management Panel)Description
Universe_PRMP (Universe_Professional Risk Management Panel)
This comprehensive tool is designed to bring institutional-grade risk discipline to retail traders. Managing risk is the most critical part of trading, especially in high-leverage environments. This script automates the complex calculations of position sizing and profit/loss projection.
How to Use:
Initial Setup: When you add the script to your chart, it will prompt you to select two price levels. The first click sets your Stop Loss (SL) and the second sets your Take Profit (TP).
Account Configuration: Open the script settings (the gear icon) to input your Account Balance and the Percentage of Risk you are willing to take per trade (standard is 1% or 2%).
Market Conditions: Enter your broker's current Spread in pips to ensure the lot size calculation accounts for the cost of entry.
Active Monitoring:
Suggested Lot: The dashboard will immediately show the exact lot size you should enter in your trading platform.
Real-Time Projection: As price moves, the dashboard tracks whether your trade is active, hit the target, or stopped out.
Visual Labels: Red (SL) and Green (TP) labels on the chart provide clear visual cues for your exit points.
Key Features:
Dynamic Position Sizing: Automatically adjusts lot size based on the distance between entry and SL.
Spread Integration: Protects your capital by including transaction costs in the risk calculation.
Ticker Sensitivity: The panel recognizes symbol changes to prevent calculation errors across different pairs.
Visual Status Indicators: Color-coded status alerts to keep you emotionally detached and strategically focused.
DISCLAIMER:
This script is an educational and utility tool designed for risk calculation purposes only. It does not provide trading signals or investment advice. Past performance is not indicative of future results. Use this tool at your own risk.
Adaptive Trend Flow (ATF)Adaptive Trend Flow (ATF) is a custom trend-following indicator designed to work reliably across all markets and all timeframes.
It uses an adaptive moving average that automatically adjusts to market conditions, combined with trend slope analysis and a volatility filter to reduce noise during ranging periods.
Unlike traditional fixed moving averages, ATF reacts faster during strong trends and slows down during consolidation, helping traders stay aligned with meaningful price movements.
🔍 How It Works
Uses an adaptive smoothing algorithm to track price efficiently
Confirms trend direction using trend slope
Filters out low-volatility and choppy conditions using ATR-based logic
Does not repaint — signals are based only on confirmed data
📊 Visual Interpretation
🟢 Green line / background → Bullish trend
🔴 Red line / background → Bearish trend
⚪ Gray → No clear trend (range / low volatility)
⚙️ Features
Works on Crypto, Forex, Stocks, Futures
Compatible with all timeframes
Optional trend-change signals
Optional background highlighting
Fully customizable inputs
Alert-ready
🎯 Best Use Cases
Trend filter for entries and exits
Directional bias for scalping, day trading, or swing trading
Strategy backbone when combined with price action or momentum tools
⚠️ Disclaimer
This indicator is for educational and analytical purposes only and does not constitute financial advice. Always manage risk appropriately.
SGX/GIFT Nifty Non-Indian Hours BoxThis scripts draws a box around the high and low of both the PRE-MARKET and POST-MARKET hours of SGX Nifty.
5% D/ID or 15%W DropCan be used to trigger alerts for 5% daily drops or intra-day drops or 15% drops during the past 5 days. Useful for selling puts.
devendra Verma 3 SMA3 SMA RSI based can work to know the volatility and movement in the trend
can try to see the crosses of each other to generate buy and sell signals
SENTINEL LITE by Pips0mnianSentinel Lite — Learning Mode is an educational indicator designed to help beginner traders develop discipline and chart-reading skills.
It highlights high-quality learning setups using:
• Trend alignment (EMA 200, 21, 50)
• EMA pullback behavior
• Strong candle confirmation
• Basic market structure
• London and New York session filtering
• Chop avoidance
This tool is not a signal service or automated strategy.
It is designed for practice, journaling, and skill-building.
Best used on:
• XAUUSD (Gold)
• 5-minute timeframe
• London & New York sessions
⚠️ Educational use only. No financial advice.
Oscillator [Scalping-Algo]█ POSTING OSCILLATOR
A squeeze momentum indicator that detects volatility compression and shows momentum direction.
█ HOW IT WORKS
This indicator combines Bollinger Bands and Keltner Channels to identify "squeeze" conditions — periods of low volatility that often precede explosive moves.
When Bollinger Bands contract inside Keltner Channels, volatility is compressing. When they expand back out, the squeeze "fires" and price typically makes a strong directional move.
█ HISTOGRAM COLORS
🟦 Bright Cyan — Positive momentum, increasing
🟦 Dark Cyan — Positive momentum, decreasing
🟪 Dark Purple — Negative momentum, increasing
🟪 Bright Magenta — Negative momentum, decreasing
█ SQUEEZE DOTS (ZERO LINE)
🟢 Teal — No squeeze (normal volatility)
⚫ Gray — Low squeeze
🔴 Red — Medium squeeze
🟠 Orange — High squeeze (breakout imminent)
█ HOW TO USE
1. Wait for squeeze dots (gray/red/orange) to appear
2. Watch which direction momentum is building
3. Enter when dots turn teal (squeeze fired)
4. Go long if histogram is cyan, short if magenta
5. Consider exit when colors fade (bright → dark)
█ BEST PRACTICES
• Works best on higher timeframes (1H, 4H, Daily)
• Combine with trend analysis and support/resistance
• Most reliable in trending markets
• Avoid trading against major levels
█ SETTINGS
Length: 20 (default) — Period for all calculations
Adjust based on your timeframe and trading style.
█ ALERTS
Set alerts for:
• Histogram crossing zero
• Squeeze firing (dot color change to teal)
• High squeeze detection (orange dots)
Enhanced Predictive Candles with MomentumSummary of improvements:
Trend confirmation: EMA crossover, RSI > 50, and MACD line > Signal for bullish, and vice versa for bearish.
Momentum validation: Uses RSI and MACD to confirm momentum before drawing prediction candles.
Dynamic height: Adjusts candle height based on ATR and volatility.
Clear visualization: Draws prediction zones, candles, wicks, and labels with clear colors.
TuxTune - PDH PDL PDCJust a simple indicator simply to show the previous day High, Low, and Close levels.
Line color, type, width are modifiable
Each line can be turned on/off
Custom EMA Ribbon Pro🌊 Custom EMA Ribbon Pro 🌊
The Ultimate Trend-Following System | Now with Dynamic Cloud Technology 🚀
Stop guessing the trend and start seeing it. The Custom EMA Ribbon Pro is a precision-engineered trading system that transforms standard moving averages into a vibrant, dynamic "Cloud." It is designed to filter out noise, visualize momentum, and help you catch massive trends on any timeframe. 🧘♂️✨
🌟 What makes this "Pro"?
This isn't just a set of lines—it’s a complete Visual Ecosystem.
We have upgraded the classic ribbon with a Dynamic Fill Algorithm that creates a glowing "Cloud" between the lines. This allows you to instantly gauge trend strength just by looking at the intensity of the color on your chart.
⚡ Key Features
🎀 8-Strand Precision: Uses 8 distinct EMAs, to show the full "Flow" of price action.
🌫️ Dynamic Cloud Fill: (NEW!) Toggleable background glow that fills the ribbon.
Green Glow: Strong Bullish Momentum 🟢
Red Glow: Strong Bearish Momentum 🔴
Note: The fill opacity is optimized to pop on dark themes while keeping price action visible!
🕯️ Trend-Based Bar Coloring: Optional feature to paint your candlesticks Green or Red based on the ribbon's direction. never trade against the trend again!
🔔 Integrated Alerts: Never miss a move. Set instant alarms for:
Bullish Cross: When the fast band crosses above the slow band.
Bearish Cross: When the fast band crosses below the slow band.
---
🛠️ How to Trade
1. The Expansion: Watch for the Ribbon (Cloud) to expand and glow bright. This indicates a high-momentum trend is active.
2. The Pullback: In a strong trend, price often pulls back into the "Cloud." This is your dynamic support/resistance zone for entries! 🎯
3. The Twist: When the Green Cloud twists and turns Red (or vice versa), it signals a potential major trend reversal.
---
⚙️ Fully Customizable
Toggle Everything: Turn the Cloud Fill, Bar Colors, or specific lines On/Off to suit your style.
Tooltips Included: Hover over any setting in the menu for a detailed explanation of what it does.
---
🔒 Invite-Only Access
This is a premium Invite-Only script.
To gain access to the Custom EMA Ribbon Pro:
📩 DM me here on TradingView for access.
See the flow. Trade the flow. 🌊📈
---
Disclaimer: Trading involves risk. This tool is for educational and analytical purposes only and does not constitute financial advice.
Ultras ADX Heat (Strength Gradient)Ultras ADX Heat (Strength Gradient) — Description
Ultras ADX Heat is a lower-pane ADX visualizer that turns raw ADX values into a strength “heat map”.
What it measures
ADX (Average Directional Index) measures trend strength on a 0–100 scale.
ADX does not tell direction (bull/bear) — only how strong the current directional movement is.
How to read the gradient
This indicator colors the ADX area using a gradient:
Red (weak) = low ADX → market is often choppy / range-bound
Blending red → teal = strength building → trend becoming more tradable
Teal (strong) = high ADX → strong trend strength (can also mean you’re late; pullbacks can be sharp)
Key levels
By default the gradient is mapped between:
20 = “trend starting / tradable” zone
40 = “strong trend” zone
You’ll see dotted horizontal lines at these levels to quickly spot when the market shifts from chop → trend.
Best use
Use this as a regime filter:
Favor strategies that trend-follow when ADX is above ~20
Avoid or tighten rules when ADX is below ~20
Inputs
ADX Length / Smoothing: controls the ADX calculation.
Weak → Strong Start / End: defines where the gradient begins (weak) and reaches full strength (strong).
Typical defaults: 20 → 40
Weak/Strong Colors: customize gradient endpoints.
Fill / Outline settings: control how bold the heat map appears.
Edgecraft - Volume SurgeEdgecraft — Volume Surge highlights moments when trading activity meaningfully increases, by flagging candles where volume exceeds a user-defined percentage of the recent average. A sudden rise in volume often signals that participation has changed — more traders are involved, liquidity is improving, and price action may be transitioning from “noise” to “decision.”
⸻
What it does
At its core, this script compares the current candle’s volume to the average volume over a lookback period and triggers when that candle reaches your chosen threshold (example: 150%, 185%, 250%, etc.). When a surge happens, the indicator plots a marker and can also trigger alerts.
⸻
What problem it solves
A breakout, breakdown, or reversal that occurs on weak participation can fail quickly. This tool helps you quickly answer:
• “Is this move attracting real attention?”
• “Is volume expanding in the direction of price?”
Rather than trying to “predict,” it gives you a participation filter to support better decision-making.
⸻
How it helps your decision process
• Helps you start thinking in a top-down way: Price + Participation
• Makes it easier to spot when the market is actually “awake”
• Reduces confusion from random intraday wiggles by focusing on meaningful activity
• Adds a clean confirmation layer to breakouts, breakdowns, ORB moves, trend continuation, and reversals
• Helps identify when liquidity/attention returns after consolidation
• Useful as a “trigger condition” for scanners and alerts without needing heavy overlays
⸻
Key features
• Custom Volume Surge Threshold (%)
Choose exactly what “surge” means to you: 150%, 185%, 250%, etc.
• Volume Average Length
Control how sensitive the baseline is by adjusting the averaging period.
• Direction Filter (Any / Bullish / Bearish)
Only show surges aligned with candle direction if you want cleaner signals.
• RTH Filter (Exchange Time)
Optionally restrict signals to Regular Trading Hours to avoid thin-liquidity noise.
• Minimal chart markers
Diamond markers appear only when the conditions are met. Clean by design.
⸻
Alert system
The script provides two alert conditions:
• Bullish Volume Surge
• Bearish Volume Surge
This makes it easy to create alerts that match your trading bias:
• set separate notification tones,
• route them to different webhooks,
• or use them for different trade plans.
⸻
How to use it
• Breakout confirmation: A breakout with a bullish surge signal suggests stronger participation.
• Breakdown confirmation: A bearish surge signal can help validate downside continuation.
• Reversal check: If price flips but volume doesn’t expand, you may treat the move as lower quality.
• Intraday focus: Enable RTH filtering to prioritize higher-quality market hours.
⸻
Edgecraft tools aim to stay simple, readable, and decision-focused — giving traders clearer context without turning the chart into a dashboard. If you find this useful, give us a like! Look for more releases from Edgecraft Indicators soon.
Pro HTF Last-Closed Levels (D / 4H / 1H) This is OHLC lines per one and 4 hour to track levels. simple and easy
Ultimate Trade By MJ1. Core Concept
This is a professional Trend-Following system designed to filter out market noise and capture high-probability moves. It uses a proprietary "Trend Anchor" line combined with a dynamic "Volatility Cloud" to determine trade entries.
2. Visual Components
The Trend Anchor (Center Line):
This line represents the "fair value" of the market.
Green: The market bias is Bullish (Up).
Red: The market bias is Bearish (Down).
The Cloud (Bands):
These are the shaded zones around the Trend Anchor. They expand and contract based on market activity.
Function: The Cloud acts as a "Safe Zone." As long as price is stuck inside the cloud, the market is considered choppy/ranging (No Trade Zone).
3. The "Cloud Breakout" Strategy
This strategy prevents you from entering too early or too late. It requires momentum to break through the Cloud barrier before signaling a trade.
🟢 BUY Signal Rules:
Trend Check: The Center Line must be Green.
The Breakout: A candle must close ABOVE the top of the Previous Cloud.
Logic: We compare against the previous bar's cloud to ensure a true breakout has occurred.
Exit/Stop Loss: The Stop Loss is automatically calculated at the bottom of the Cloud (the invalidation point).
🔴 SELL Signal Rules:
Trend Check: The Center Line must be Red.
The Breakout: A candle must close BELOW the bottom of the Previous Cloud.
Exit/Stop Loss: The Stop Loss is automatically calculated at the top of the Cloud.
4. Re-Entry Signals (Triangles)
Once a trend is established, the system looks for "pullbacks" to add to the position.
Green Triangle: Price dipped into the cloud but found support and bounced back up. (Buy the Dip).
Red Triangle: Price rallied into the cloud but hit resistance and dropped back down. (Sell the Rally).
[HM Trades]🔥 HM Trades X Pro - Exclusive for HM Trades Members
The Ultimate All-in-One HM Trades X Trading Indicator
After months of development and real-market testing, I'm proud to release the most comprehensive exclusively for HM Trades Academy members.
⚡ Core Features:
📊 OPC (Opposing Candle) Detection
Automatic bullish/bearish OPC level identification
Real-time market bias tracking (OPC+ / OPC-)
Smart level completion detection with visual styling
📈 Fair Value Gaps (FVG)
Dynamic shrinking FVGs that adjust in real-time
Midline visualization for precision entries
Customizable colors for bullish/bearish gaps
🕯️ HTF Candles Panel
Auto-aligned Higher Timeframe candles on your chart
Dual HTF display: Custom TF + Fixed Daily
Live countdown timer for each HTF candle
OHLC price labels & projection lines
Stetson IndicatorManual Rays if wanted, 18-3 Asian Session for Chicago Time, 2-7 for London Time, and 1,2,3,5 Minute unmitigated FVGs.
