Mulai

Standard

STANDARD DEVIATION INDICATOR BY WISE TRADERWISE TRADER STANDARD DEVIATION SETUP: The Ultimate Volatility and Trend Analysis Tool Unlock the power of STANDARD DEVIATIONS like never before with the this indicator, a versatile and comprehensive tool designed for traders who seek deeper insights into market volatility, trend strength, and price action. This advanced indicator simultaneously plots three sets of customizable Deviations, each with unique settings for moving average types, standard deviations, and periods. Whether you’re a swing trader, day trader, or long-term investor, the STANDARD DEVIATION indicator provides a dynamic way to spot potential reversals, breakouts, and trend-following opportunities. Key Features: STANDARD DEVIATIONS Configuration : Monitor three different Bollinger Bands at the same time, allowing for multi-timeframe analysis within a single chart. Customizable Moving Average Types: Choose from SMA, EMA, SMMA (RMA), WMA, and VWMA to calculate the basis of each band according to your preferred method. Dynamic Standard Deviations: Set different standard deviation multipliers for each band to fine-tune sensitivity for various market conditions. Visual Clarity: Color-coded bands with adjustable thicknesses provide a clear view of upper and lower boundaries, along with fill backgrounds to highlight price ranges effectively. Enhanced Trend Detection: Identify potential trend continuation, consolidation, or reversal zones based on the position and interaction of price with the three bands. Offset Adjustment: Shift the bands forward or backward to analyze future or past price movements more effectively. Why Use Triple STANDARD DEVIATIONS ? STANDARD DEVIATIONS are a popular choice among traders for measuring volatility and anticipating potential price movements. This indicator takes STANDARD DEVIATIONS to the next level by allowing you to customize and analyze three distinct bands simultaneously, providing an unparalleled view of market dynamics. Use it to: Spot Volatility Expansion and Contraction: Track periods of high and low volatility as prices move toward or away from the bands. Identify Overbought or Oversold Conditions: Monitor when prices reach extreme levels compared to historical volatility to gauge potential reversal points. Validate Breakouts: Confirm the strength of a breakout when prices move beyond the outer bands. Optimize Risk Management: Enhance your strategy's risk-reward ratio by dynamically adjusting stop-loss and take-profit levels based on band positions. Ideal For: Forex, Stocks, Cryptocurrencies, and Commodities Traders looking to enhance their technical analysis. Scalpers and Day Traders who need rapid insights into market conditions. Swing Traders and Long-Term Investors seeking to confirm entry and exit points. Trend Followers and Mean Reversion Traders interested in combining both strategies for maximum profitability. Harness the full potential of STANDARD DEVIATIONS with this multi-dimensional approach. The "STANDARD DEVIATIONS " indicator by WISE TRADER will become an essential part of your trading arsenal, helping you make more informed decisions, reduce risks, and seize profitable opportunities. Who is WISE TRADER ? Wise Trader is a highly skilled trader who launched his channel in 2020 during the COVID-19 pandemic, quickly building a loyal following. With thousands of paid subscribed members and over 70,000 YouTube subscribers, Wise Trader has become a trusted authority in the trading world. He is known for his ability to navigate significant events, such as the Indian elections and stock market crashes, providing his audience with valuable insights into market movements and volatility. With a deep understanding of macroeconomics and its correlation to global stock markets, Wise Trader shares informed strategies that help traders make better decisions. His content covers technical analysis, trading setups, economic indicators, and market trends, offering a comprehensive approach to understanding financial markets. The channel serves as a go-to resource for traders who want to enhance their skills and stay informed about key market developments.
Indikator Pine Script™
oleh thisiskanisk
4
Range Deviations @joshuuuThis indicator is able to show ranges, the equlibrium (50%) and range deviations. It has four pre-defined options and one custom version. Asia (2000-0000) ny time CBDR(1400-2000) ny time Flout(1400-0000) ny time ONS (OverNightSession)(0400-0800) chicago time Custom (you can choose the times) ICT (Inner Circle Traders) teaches, that those range deviations of asia,cbdr,flout can be used to find the daily high/low. TCM (The Currency Merchant) teaches, that a move out of the range often is a false move to trap traders into the wrong direction.
Indikator Pine Script™
oleh joshuuu
9
Anchored Three Sigma RangeThis indicator serves to display the standard deviation model based on open price from the selected anchored timeframe. Per statistics the price may stay within the three sigma range most of the time, most significantly within first sigma range 68% of the time. If price breaks the statistical probabilities and out of the three sigma range entirely it could be considered anomalous and perhaps useful for trade planning, use the fib extensions in various ways to have dynamic profit targets, support or resistance. How is this different This indicator differs from others in that I've not really seen any others generating solely horizontal levels, anchored from open price and including fib extensions. How to use To use this indicator add to the chart, select anchor timeframe, fib display mode and adjust style to liking. Depending on trade plans use the range breaks, consolidations or fib extensions as required. One could utilize range consolidation for advanced options neutral trades, range breaks for scalping directionally or high fib extensions for rejection based trades. Based on timeframe anchorage there could be some really amazing combinations for any style of trading, comment any unique findings! What markets This indicator can be used on anything that has a price :D Conditions Any condition is applicable.
Indikator Pine Script™
oleh syntaxgeek
8
Probability Cloud BASIC [@AndorraInvestor]🔮☁️ This is the BASIC version of the PROBABILITY CLOUD indicator. It is an evolution beyond traditional standard deviation probabilistic indicators only using bands or channels. The new PROBABILITY CLOUD graphic representation with customizable transparent layers is based on -2 / +2 standard deviation calculated using 20 fixed predetermined time periods, and is available in several calculation MODES: SMA , EMA , WMA , VWMA , VWMA & VAWMA The indicator is designed to let the trader visually understand the probabilistic depth of past, present and future price action, and its evolution over time. Looking forward to your comments and feedback to guide me on future updates! 🙏 Big THANKS @Electrified for letting me use his work on Deviation Bands/ as a starting point for my first script.
Indikator Pine Script™
oleh AndorraInvestor
1
Standard Deviation Channel V.1Standard Deviation channel For TradingView V.1 Many thanks to and Made with help from @rumpypumpydumpy █ - How to add the indicator- You can “Boost” the tool if you like it, then scroll down on this page to "Add to favorite indicators" so it will be saved in your favorites. Easiest way to add to chart past that is simply copy the indicators name, Navigate to a chart, then paste the indicators name into your chart's "Indicators" tab. It should then be immediately added to the current chart. If your display is not large enough, when you first add your channel,, you may realize that you see labels appear, but no channel. Simply scroll backwards in time until the chart loads. TradingView needs to be able to see the data you would like the channel to read in order to plot and display correctly. This is a simple one or two mouse wheel scroll and it will appear. You may notice a compression of price scale. IF this happens simply right click your right price axis, a menu will appear, select “Scale price chart only”, and "Auto (fits data to screen) This will release the scale compression and let you view the channel and price normally. Once your Channel is added, loaded, and ready to go, you can proceed to settings. In the top left corner of your main chart there will be a Indicator title, hover that and click on the gear icon to access the channels custom settings. You can also double click any of the active plots from the channel or averages on the chart, and gain access to the settings panel through that. █  OVERVIEW Settings explained - Inputs and color choices You can think of the settings panel as 3 separate sections. First - Look and feel- You will have your Channels visual inputs, Simple Yes or No check boxes on whether you would like to display the visual items listed. You can choose to display the channel in a multitude of ways, with or without half deviations, with no 2nd, 3rd, or 4th deviations. This first section is your quick access control panel to the visual feel and display of the channel and its items. Then below that you will see quick access color presets for each deviation and half deviations. You can choose to leave these as is, or you can choose custom colors per your preference. The positive and negative Second deviations (+/-2std) are colored by positive and negative slope of channel. This will help to show overall trend, whether up or down, positive or negative. User can change the positive and negative slope colors if they would like. Second, - Time and Regression - Next as you scroll down the settings panel you will encounter the Time and regression settings. In order for the channel to match the channel used widely in TOS, we had to Preset the look back lengths into the code because on Tradingview we have an “Continuous left edge of the chart”. We needed to tell the channel how far to look back and start calculating. The frame work for this time logic came initially from the channel that was developed years back by @corgalicious, We then took that time logic and re-worked it in order to fit the parameters that the widely used and popular TOS channel has. Above the time frame length back inputs you will find a dropdown menu "Regression method type". This will offer different methods of regression and calculating the standard deviation from the center linear regression line. It is preset to “Population standard deviation” which will mimic the widely used TOS channel. There is also a choice for “Regression method standard error, or RMSE. This is a similar regression style, but will result in a tighter fitting, smaller deviation measurement and channel all around. As well as a multitude of other regression styles thanks to the genius of @rumpypumpydumpy All the time presets were carefully chosen based off Pre set time frames TOS offers for their widely used Standard deviation channel, and time frames I had noted as widely used. You as the user can change those look back windows if you prefer through the input length settings. I recommend using the stock settings in most scenarios. Trading view has a 5000 bar look back limit, so we have implemented “Max lookbacks” inside the code to avoid any user error or confusion. The standard error of the sample mean is an estimate of how far the sample mean is likely to be from the population mean, whereas the standard deviation of the sample is the degree to which individuals within the sample differ from the sample mean. For longer time frames and sample sets I tend to use Population Standard Dev setting. For smaller sample sets I will go with Linreg RMSE setting. This is a personal preference. It is encouraged to try all of them and see what fits your trading style the best. If the user would like to use a "Max bar lookback and plot the maximum allowed length on the current time frame, Simply select, "Use the full range of data allowed in max bars back for calculation?" This will automatically search back on the current time frame and plot the channel 4999 bars back. User will have to SCROLL BACK in order to fully load the channel into view. Again, Tradingview needs to see the candles you would like to plot on. Third, - Finally at the bottom of the settings I have included Exponential moving average clouds. These are NOT enabled by default. If the user would like them enabled simply check "show momentum average clouds" and "Show Candle EMA". These are Multiple time frame moving average clouds consisting of 72/89 length 3, and 5min exponential moving averages. I use these to simply show the front or back side of a move and to find if trend is strong or weakening. These are not always needed so they are turned off by default. █  CONCEPTS Reversion and Repulsion- You will find that the channel linear regression trend line has two characteristic's, Reversion to the mean, and Repulsion away from the mean. Price either seeks to aggressively return to the mean when it has exited a normal distribution, or price seeks to aggressively move away from the mean in times of momentum. Most seek to participate in the move through MAJOR WHOLE deviation levels in one scenario or the other. The idea behind using a Standard deviation channel is to see extension and find where in the move we are. Are you extended out to 3 or 4 deviation's up or down? If so, you could start to think about reversion back to the mean. Have you had a violent move down to -3 or -4 deviations in a sell off? Maybe look at reversion back up toward the mean off a whole deviation break. Have you broken out of a normal distribution at +1 deviation and are building trend? maybe seek to join trend. I have found most success by using a Split screen style layout. On the left chart most will have a 1min intraday channel showing, and on the left chart a 4hr channel showing. The idea is to mark your longer time frame deviations onto your intraday time frame, and use the intraday Channel to guide you through the higher time framed move. The move through +/- 1 deviation is a high momentum area in most names as price either seeks to return to the mean, or move strongly away from the mean. █  Time periods The channel has pre determined lookback presets for each major time frame. These have been preset in the code to mimic the widely used channel in TOS to the best of our ability. Preset timeframe lookbacks include. //intraday shorter time frames. 1/2min with 2day lookbacks '1D-1Min' - Default= 2D, minval=1, maxval=5 '1D-2Min' - Default= 2D, minval=1, maxval=7 //intraday shorter time frames. 3/5min with 5day lookbacks. User can set shorter or longer if they choose, up to a 5000k bar look back depending on their Data tier level, Basic, Pro, Pro+, Premium etc. '5D-3Min' - Default= 5D, minval=1, maxval=7 '5D-5Min' - Default= 5D, minval=1, maxval=20 // larger intraday time frames, 10/15min with 5day look backs. '5D-10Min' - Default= 5D, minval=1, maxval=20 '5D-15Min' - Default= 5D, minval=1, maxval=60 // "Swing style time frames" 30/60 min with 10 and 20 day look back. '10D-30Min' - Default= 10D, minval=1, maxval=60 '20D-1Hr' - Default= 20D, minval=1, maxval=90 //longer lookbacks for larger time frames using day lookback with the exception of week/month '90D-2Hr' - Default = 90D, minval=1, maxval=180 '4h ' - Default = 180D,minval=1, maxval=4999 '6h' - Default = 36D, minval=1, maxval=252 '5Yr-W' - Default = 260W,minval=1, maxval=260 '1Yr-1D' - Default = 252D,minval=1, maxval=4999 '1Yr-1W' - Default = 52W, minval=1, maxval=480 '5Yr-1M' - Default = 60W, minval=1, maxval=480 █ Minimum Window Size Note that on each time frame you MUST quickly scroll out to the first bar that the channel should start calculating on in order for the channel to populate on longer time frame series. This is under construction and as soon as there is a fix or other way around this, it will be addressed. █  NOTES Enjoy! In the end I encourage any who tries the Channel to really sit down and spend some time playing around with the settings in order to find out how they like the Channel set up. I usually run the default settings on a intraday 5min chart, and then another instance of the study on a 4 hour chart. That way I can see granular intraday levels, and macro long term levels in the same view. See what fit's you the best, and how you like to trade. Most of all ENJOY! Good luck - JMF. IMPORTANT INFO- As always, the creator of this code is NOT a licensed investment advisor. No output of this tool is to be taken as investment advice or a recommendation to buy or sell any security. Trading is risky, any one using this tool acknowledges they CAN LOSE some if not all of their initial investment even with this tool enabled. User assumes ALL RESPONSIBILITY when using this tool in their technical analysis. There is NO GUARANTEE THAT THE USE OF THIS TOOL WILL RESULT IN PROFIT Use at your own risk.
Indikator Pine Script™
oleh JMF_Tattoo
9
Standard deviation channel of linear regression distance [AbAh]The indicator calculates the distance between linear regression line and the data point (price) as a percentage , then calculates the standard deviation for the linear regression distance , then draw the channel of two lines depending on the values of standard deviation . ///////// How to use //////////////// 1 - for Best result , indicator should be used on 2H frame Time of less : like 1H or 30 min 2 - The upper line and the lower line, both play a role as a support and resistance area, when the price bounces from the upper zone or lower zone, there is a high probability that it will move to the other line. 3 - The price breakout of one of the lower or upper lines may indicate a major price movement coming in the direction of the breakout /////////////////////////////////////
Indikator Pine Script™
oleh AbdullahAhmedEgypt
2
Weighted Standard Deviation BandsLinearly weighted standard deviations over linearly weighted mean. The rationale of the study can be deduced from my latest publications where I go deeper into explaining the benefits of linear weighting, but in short, I can remind that by using linear weighting we are able to increase the information gain by communicating the sequential nature of time series to the calculations via linear weighting. Note, that multiplier parameters can take both negative and positive values resulting in ability to have, for example, 1st and 6th weighted standard deviations higher than the weighted mean. Despite the modification of the classic standard deviation formula, I assume that mathematical qualities of standard deviation will hold due to the fact we can alternately weight the window itself, and then apply the classic standard deviation over the weighted window. In both cases, the results will be the same. Aight that was too formal, but your short strangles should be happy Here is it, for you
Indikator Pine Script™
oleh gorx1
2
Probability ConesA probability cone is an indicator that forecasts a statistical distribution from a set point in time into the future. Features Forecast a Standard or Laplace distribution. Change the how many bars the cones will lookback and sample in their calculations. Set how many bars to forecast the cones. Let the cones follow price from a set number of bars back. Anchor the cones and they will not update from their last location. Show or hide any set of cones. Change the deviation used of any cone's upper or lower line. Change any line's color, style, or width. Change or toggle the fill colors between any two cone lines. Basic Interpretations First, there is an assumption that the distribution starting from the cone's origin, based on the number of historical bars sampled, is likely to represent the distribution of future price. Price typically hangs around the mean. About 68% of price stays within the first deviation cones. About 95% of price stays within the second deviation cones. About 99.7% of price stays within the third deviation cones. When price is between the first and second deviation cones, there is a higher probability for a reversal. However, strong momentum while above or below the first deviation can indicate a trend where price maintains itself past the first deviation. For this reason it's recommended to use a momentum indicator alongside the cones. There is no mean reversion assumption when price deviates. Price can continue to stay deviated. It's recommended that the cones are placed at the beginning of calendar periods. Like the month, week, or day. Be mindful when using the cones on various timeframes. As the lookback setting, which selects the number of bars back to load from the cone's origin, will load the number of bars back based on the current timeframe. Second Deviation Strategy How to react when price goes beyond the second deviation is contingent on your trading position. If you are holding a losing trade and price has moved past the second deviation, it could be time to stop trading and exit. If you are holding a winning trade and price has moved past the second deviation, it would be best to look at exit strategies to capitalize on the outperformance. If price has moved beyond the second deviation and you hold no position, then do not open any new trades.
Indikator Pine Script™
oleh joebaus
61
[cache_that_pass] 1m 15m Function - Weighted Standard DeviationTradingview Community, As I progress through my journey, I have come to the realization that it is time to give back. This script isn't a life changer, but it has the building blocks for a motivated individual to optimize the parameters and have a production script ready to go. Credit for the indicator is due to @rumpypumpydumpy I adapted this indicator to a strategy for crypto markets. 15 minute time frame has worked best for me. It is a standard deviation script that has 3 important user configured parameters. These 3 things are what the end user should tweak for optimum returns. They are.... 1) Lookback Length - I have had luck with it set to 20, but any value from 1-1000 it will accept. 2) stopPer - Stop Loss percentage of each trade 3) takePer - Take Profit percentage of each trade 2 and 3 above are where you will see significant changes in returns by altering them and trying different percentages. An experienced pinescript programmer can take this and build on it even more. If you do, I ask that you please share the script with the community in an open-source fashion. It also already accounts for the commission percentage of 0.075% that Binance.US uses for people who pay fees with BNB. How it works... It calculates a weighted standard deviation of the price for the lookback period set (so 20 candles is default). It recalculates each time a new candle is printed. It trades when price lows crossunder the bottom of that deviation channel, and sells when price highs crossover the top of that deviation channel. It works best in mid to long term sideways channels / Wyckoff accumulation periods.
Strategi Pine Script™
oleh cache_that_pass
1
Volume TrendsThis script provides clear volume trends on any time frame. You set a long term volume trend moving average (ex 100 periods). A shorter term MA of your choice (10 in this example) will oscillate above and below based on the standard deviations of its current value relative to the long term #. Similarly, large volume bars are plotted in terms of st dev above the long term MA. Very useful in spotting capitulation bottoms and/or blow-off tops.
Indikator Pine Script™
oleh imbes2
Tradingview ToolkitA new trader's biggest barrier to entry is lack of understanding where they are in terms of time and price and with tradingview free they are often limited to just 1 or 2 extra indicators as many new traders slap on RSI and MACD as 2/3 free ones. While these indicators are fine for trend analysis, its important to know where the price is in relation to time. Thus, this all-in-one script is meant to have a lot of customizable utility to save on indicator spots and act as a hotspot for many common needs. -2 Sets of VWAP line w/ standard deviation bands with customizable timeframes. -1 more customizable timeframe VWAP line (no std dev bands) to use as a long time frame reference -Ability to plot previous VWAP close prices over current timeframe on all VWAP lines w/ basic color changing if price closes above/below -2 Sets of Bollinger Bands with customizable source length and MA type -3 customizable moving averages with custom timeframe/resolutions -Inside candle barcolor repainter to easily notice if a candle was inside the range of the previous candle (price contraction) Not meant to have everything on at once, but simply a place to enable and disable different things and save spots for more important things
Indikator Pine Script™
oleh imbes
2
Risk Position Sizing tool using Coefficient of VariationA way to manage portfolio risk using relative standard deviation, also known as coefficient of variation. This tool tells you how much of each stock in shares and in value to buy adjusted for their volatility risk for a given starting account capital. A problem many people have is how to diversify an account and adjusting it for the risk involved in each equity. Many would put in an equal amount of capital value into each share but is it really equal if some equities have more risk than others? A solution is to adjust the portfolio by giving less weight to those that are more volatile or risky. It's done by using a starting percent of the account, preferably a small percent of it, and buying up shares with that same amount for each equity. Each equity will also be divided by the COV to risk adjust the portfolio by giving less weight to the more volatile stocks. This is done until as much of the initial capital in the account as possible is spent. COV is how far away the price is from the mean or average. The further the price is from the mean the more risk or volatility there is. It uses standard deviation in its calculation. The problem with SD and ATR is that they are not relative to the past or to other equities to compare to. An application where COV can be used is risk portfolio management formulas. This does not take into account correlation or other equation parts in some portfolio management formulas but only the risk or volatility, the default volatility length is mostly arbitrary, and the lower risk stocks may end up being the slowest in performance. The text label will show how many shares will be bought and how much value each equity will have. At the end it will show the initial capital that was started off with, the total shares bought, the total value of all the shares, and the amount of capital left over. If the sources are not blank then they will be used, to blank them you will need to reset the settings to default otherwise they might still be read. If you want to add more than the given 10 equity spaces to the portfolio then you will need to add in the code manually and add it to the chart. The denominator is perhaps the important part in these types of risk position sizing tools, you can change to other things such as risk-reward ratio instead of volatility or change the volatility type, etc.
Indikator Pine Script™
oleh SparkyFlary
5
Pinescript - Standard Array Functions Library by RRBStandard Array Functions Library by RagingRocketBull 2021 Version 1.0 This script provides a library of every standard Pinescript array function for live testing with all supported array types. You can find the full list of supported standard array functions below. There are several libraries: - Common String Functions Library - Common Array Functions Library - Standard Array Functions Library Features: - Supports all standard array functions (30+) with all possible array types* (* - except array.new* functions and label, line array types) - Live Output for all/selected functions based on User Input. Test any function for possible errors you may encounter before using in script. - Output filters: show errors, hide all excluded and show only allowed functions using a list of function names - Console customization options: set custom text size, color, page length, line spacing Notes: - uses Pinescript v3 Compatibility Framework - uses Common String Functions Library - has to be a separate script to reduce the number of local scopes in Common Array Function Library, there's no way to merge these scripts into a single library. - lets you live test all standard array functions for errors. If you see an error - change params in UI - array types that are not supported by certain functions and producing a compilation error were disabled with "error" showing up as result - if you see "Loop too long" error - hide/unhide or reattach the script - doesn't use pagination, a single str contains all output - for most array functions to work (except push), an array must be defined with at least 1 pre-existing dummy element 0. - array.slice and array.fill require from_index < to_index otherwise error - array.join only supports string arrays, and delimiter must be a const string, can't be var/input. Use join_any_array to join any array type into string. You can also use tostring() to join int, float arrays. - array.sort only supports int, float arrays. Use sort_any_array from the Common Array Function Library to sort any array type. - array.sort only sorts values, doesn't preserve indexes. Use sort_any_array from the Common Array Function Library to sort any array while preserving indexes. - array.concat appends string arrays in reverse order, other array types are appended correctly - array.covariance requires 2 int, float arrays of the same size - tostring(flag) works only for internal bool vars, flag expression can't depend on any inputs of any type, use bool_to_str instead - you can't create an if/function that returns var type value/array - compiler uses strict types and doesn't allow that - however you can assign array of any type to another array of any type creating an arr pointer of invalid type that must be reassigned to a matching array type before used in any expression to prevent error - source_array and create_any_array2 use this loophole to return an int_arr pointer of a var type array - this works for all array types defined with/without var keyword. This doesn't work for string arrays defined with var keyword for some reason - you can't do this with var type vars, this can be done only with var type arrays because they are pointers passed by reference, while vars are the actual values passed by value. - wrapper functions solve the problem of returning var array types. This is the only way of doing it when the top level arr type is undefined. - you can only pass a var type value/array param to a function if all functions inside support every type - otherwise error - alternatively values of every type must be passed simultaneously and processed separately by corresponding if branches/functions supporting these particular types returning a common single result type - get_var_types solves this problem by generating a list of dummy values of every possible type including the source type, allowing a single valid branch to execute without error - examples of functions supporting all array types: array.size, array.get, array.push. Examples of functions with limited type support: array.sort, array.join, array.max, tostring - unlike var params/global vars, you can modify array params and global arrays directly from inside functions using standard array functions, but you can't use := (it only works for local arrays) - inside function always work with array.copy to prevent accidental array modification - you can't compare arrays - there's no na equivalent for arrays, na(arr) doesn't work P.S. A wide array of skills calls for an even wider array of responsibilities List of functions: - array.avg(arr) - array.clear(arr) - array.concat(arr1, arr2) - array.copy(arr) - array.covariance(arr1, arr2) - array.fill(arr, value, index_from, index_to) - array.get(arr, index) - array.includes(arr, value) - array.indexof(arr, value) - array.insert(arr, index, value) - array.join(arr, delimiter) - array.lastindexof(arr, value) - array.max(arr) - array.median(arr) - array.min(arr) - array.mode(arr) - array.pop(arr) - array.push(arr, value) - array.range(arr) - array.remove(arr, index) - array.reverse(arr) - array.set(arr, index, value) - array.shift(arr) - array.size(arr) - array.slice(arr, index_from, index_to) - array.sort(arr, order) - array.standardize() - array.stdev(arr) - array.sum(arr) - array.unshift(arr, value) - array.variance(arr)
Indikator Pine Script™
oleh RagingRocketBull
2
VAMA Volume Adjusted Moving Average BandsThis indicator is standard deviation bands using a live analysis adaptation of Richard Arms' ‎Volume Adjusted Moving Average as their basis. ‎VAMA utilizes a period length that is based on ‎volume increments rather than time. • SampleN - N ‎volume bars used as sample to calculate average ‎volume , 0 equals all bars. • VAMA Source - Price used for ‎volume weighted calculations. • VAMA Length - Specified number of ‎volume ratio buckets to be reached. • VAMA VI Fct - Size of ‎volume ratio buckets. • VAMA Strict - Must meet desired ‎volume requirements, even if number of bars has to exceed ‎VAMA Length to do it. • STDV Factor - Standard Deviation multiplier. • STDV Length - Standard Deviation period. • Brightness - Color opaqueness for the band fills. Please see previous published example here for more details on VAMA's usage and inability to redraw the past on time based charts. NOTICE: This is an example script and not meant to be used as an actual strategy. By using this script or any portion thereof, you acknowledge that you have read and understood that this is for research purposes only and I am not responsible for any financial losses you may incur by using this script!
Indikator Pine Script™
oleh allanster
10
ATS Masters Indicator #2This ATS Master Indicator #2 is a collection of multiple useful indicators, which only requires one indicator slot in TradingView. In this collection you will find the following 12 indicators: Bollinger Bands (three different types: Fibonacci, Standard, Improved) Moving Averages (up to two individual MA indicators) Exponential Moving Averages (up to two individual EMA indicators) Double Exponential Moving Averages (up to two individual DEMA indicators) Tripple Exponential Moving Averages (up to two individual TEMA indicators) Volume Weighted Moving Average Weighted Moving Average So, using this master indicator you are able to use up to 12 indicators in one. If you would like to test this master indicator drop me a line and send a request for it.
Indikator Pine Script™
oleh ATS-TRADING
1
Standard Deviation Measurement ToolIf you like the script please come back and leave me a comment or find me on the interwebs. I get notified you "liked" it... but I have no idea if you actually use it. So, let me know =) The script uses the open price as the mean and calculates the standard deviation from the open price on a per candle basis - Goal: - To establish a mean based on the Open Price and calculate the standard deviation. The reason for this is if the Open is the mean, then the Standard deviation implies a standardized distance a given candle can be expected to travel from the open price - Edge: - If you know that there is a 68%/95%/99.7% probability that price will NOT move more than One Standard Deviation/Two Standard Deviations/Three Standard Deviations from the open price respectively you can set reasonable price targets that relate to those probabilities in a given timeframe. e.g. if you're on a 1h chart and your target is 3.5% from the open price, but 1 standard deviation of the hourly candle is equal to 0.78%. You can make assumptions on either: - The reasonableness of your target or - The holding period likely required for the trade. Also, Standard Deviation is a function of volatility and this tool provides a unique mechanism for measuring volatility as well on a candle by candle basis - Customization Options- - Set 3 independent upper and lower standard deviations. - Each set of standard deviations are on a switch so you can show 1, 2, or 3 sets of standard deviations - You can set the distribution width - Though it's not recommended, you can change the mean source. - There is a switch to show the standard deviation on only the real-time bar or real-time and historical bars. - How I Think About This Script - This strategy is predicated the same principle as Bollinger Bands: the reality that 68% of all data points will fall within one standard deviation of the mean, 96% of all data points will fall within two standard deviations, and 98% of al data points will fall within 3 standard deviations. By understanding the standard deviation, you can possibly infer an edge by understanding the probabilistic range price will be bound to the limits of standard deviation rules according to their probabilistic outcomes for the single candle on any given timeframe. Bollinger Bands are designed to provide this information with the mean being a 20-period moving average and this indicator. This indicator is designed to provide standard deviation information with the mean being based on the distance price travels away from the open of individual candles in the lookback period. If you use a strategy where you enter on major candle closes, this can be useful to set targets for those entries based on the intended hold period or at least add/remove validity to other target metrics. Example: Your target is at the 1.618 Fibonacci level and your confirmation triggers on the 4h candle close (H4 if that's your thing lol). You set up the indicator based on the standard deviation of price movement in 4h candles over the last week. Let's say the indicator shows that the 1.618 Fibonacci level is 3 standard deviations away. This being the case this statistically indicates that within the next 4 hours, you have a very low probability of achieving your target (>2%). This doesn't invalidate your target, but it does indicate a low probability of achieving it in the next 4hrs. With this information, you can infer that you are either going to be (a) really lucky (b) in this trade for a lot longer than 4hrs or (c) your target is unrealistic given your intended hold period. You can develop a more probabilistically favorable hold period calculation by looking at the standard deviation on a higher time frame (e.g. 1d-1w). Bonus feature: You'll find that the 2 and 3 standard deviations will often "cluster" and these clusters often provide future S/R levels. That's a pretty sweet feature no one things to look for. But, try it. Find a cluster of 2nd and 3rd stdevs that are in somewhat of a horizontal pattern (usually the result of a range) and you'll find that to be a good s/r area. Even better if you use the 3.2 standard deviation, you'll find that is a fantastic breakout signal! Summary So, you can use it for target setting, a confluence test, a reasonableness test, or just a measurement tool. This was the first TV script I ever wrong.. Got taken down. But, I've re-released it because there are other TV scripts that attempt to do this but are completely wrong. Please be careful about using other people's scripts. Always validate the math of the script before you use it if possible. Stay safe out there and I hope all your dreams come true.
Indikator Pine Script™
oleh kurtsmock
44
Backtesting on Non-Standard Charts: Caution! - PineCoders FAQMuch confusion exists in the TradingView community about backtesting on non-standard charts. This script tries to shed some light on the subject in the hope that traders make better use of those chart types. Non-standard charts are: Heikin Ashi (HA) Renko Kagi Point & Figure Range These chart types are called non-standard because they all transform market prices into synthetic views of price action. Some focus on price movement and disregard time. Others like HA use the same division of bars into fixed time intervals but calculate artificial open, high, low and close (OHLC) values. Non-standard chart types can provide traders with alternative ways of interpreting price action, but they are not designed to test strategies or run automated traded systems where results depend on the ability to enter and exit trades at precise price levels at specific times, whether orders are issued manually or algorithmically. Ironically, the same characteristics that make non-standard chart types interesting from an analytical point of view also make them ill-suited to trade execution. Why? Because of the dislocation that a synthetic view of price action creates between its non-standard chart prices and real market prices at any given point in time. Switching from a non-standard chart price point into the market always entails a translation of time/price dimensions that results in uncertainty—and uncertainty concerning the level or the time at which orders are executed is detrimental to all strategies. The delta between the chart’s price when an order is issued (which is assumed to be the expected price) and the price at which that order is filled is called slippage . When working from normal chart types, slippage can be caused by one or more of the following conditions: • Time delay between order submission and execution. During this delay the market may move normally or be subject to large orders from other traders that will cause large moves of the bid/ask levels. • Lack of bids for a market sell or lack of asks for a market buy at the current price level. • Spread taken by middlemen in the order execution process. • Any other event that changes the expected fill price. When a market order is submitted, matching engines attempt to fill at the best possible price at the exchange. TradingView strategies usually fill market orders at the opening price of the next candle. A non-standard chart type can produce misleading results because the open of the next candle may or may not correspond to the real market price at that time. This creates artificial and often beneficial slippage that would not exist on standard charts. Consider an HA chart. The open for each candle is the average of the previous HA bar’s open and close prices. The open of the HA candle is a synthetic value, but the real market open at the time the new HA candle begins on the chart is the unrelated, regular open at the chart interval. The HA open will often be lower on long entries and higher on short entries, resulting in unrealistically advantageous fills. Another example is a Renko chart. A Renko chart is a type of chart that only measures price movement. The purpose of a Renko chart is to cluster price action into regular intervals, which consequently removes the time element. Because Trading View does not provide tick data as a price source, it relies on chart interval close values to construct Renko bricks. As a consequence, a new brick is constructed only when the interval close penetrates one or more brick thresholds. When a new brick starts on the chart, it is because the previous interval’s close was above or below the next brick threshold. The open price of the next brick will likely not represent the current price at the time this new brick begins, so correctly simulating an order is impossible. Some traders have argued with us that backtesting and trading off HA charts and other non-standard charts is useful, and so we have written this script to show traders what happens when order fills from backtesting on non-standard charts are compared to real-world fills at market prices. Let’s review how TV backtesting works. TV backtesting uses a broker emulator to execute orders. When an order is executed by the broker emulator on historical bars, the price used for the fill is either the close of the order’s submission bar or, more often, the open of the next. The broker emulator only has access to the chart’s prices, and so it uses those prices to fill orders. When backtesting is run on a non-standard chart type, orders are filled at non-standard prices, and so backtesting results are non-standard—i.e., as unrealistic as the prices appearing on non-standard charts. This is not a bug; where else is the broker emulator going to fetch prices than from the chart? This script is a strategy that you can run on either standard or non-standard chart types. It is meant to help traders understand the differences between backtests run on both types of charts. For every backtest, a label at the end of the chart shows two global net profit results for the strategy: • The net profits (in currency) calculated by TV backtesting with orders filled at the chart’s prices. • The net profits (in currency) calculated from the same orders, but filled at market prices (fetched through security() calls from the underlying real market prices) instead of the chart’s prices. If you run the script on a non-standard chart, the top result in the label will be the result you would normally get from the TV backtesting results window. The bottom result will show you a more realistic result because it is calculated from real market fills. If you run the script on a normal chart type (bars, candles, hollow candles, line, area or baseline) you will see the same result for both net profit numbers since both are run on the same real market prices. You will sometimes see slight discrepancies due to occasional differences between chart prices and the corresponding information fetched through security() calls. Features • Results shown in the Data Window (third icon from the top right of your chart) are: — Cumulative results — For each order execution bar on the chart, the chart and market previous and current fills, and the trade results calculated from both chart and market fills. • You can choose between 2 different strategies, both elementary. • You can use HA prices for the calculations determining entry/exit conditions. You can use this to see how a strategy calculated from HA values can run on a normal chart. You will notice that such strategies will not produce the same results as the real market results generated from HA charts. This is due to the different environment backtesting is running on where for example, position sizes for entries on the same bar will be calculated differently because HA and standard chart close prices differ. • You can choose repainting/non-repainting signals. • You can show MAs, entry/exit markers and market fill levels. • You can show candles built from the underlying market prices. • You can color the background for occurrences where an order is filled at a different real market price than the chart’s price. Notes • On some non-standard chart types you will not obtain any results. This is sometimes due to how certain types of non-standard types work, and sometimes because the script will not emit orders if no underlying market information is detected. • The script illustrates how those who want to use HA values to calculate conditions can do so from a standard chart. They will then be getting orders emitted on HA conditions but filled at more realistic prices because their strategy can run on a standard chart. • On some non-standard chart types you will see market results surpass chart results. While this may seem interesting, our way of looking at it is that it points to how unreliable non-standard chart backtesting is, and why it should be avoided. • In order not to extend an already long description, we do not discuss the particulars of executing orders on the realtime bar when using non-standard charts. Unless you understand the minute details of what’s going on in the realtime bar on a particular non-standard chart type, we recommend staying away from this. • Some traders ask us: Why does TradingView allow backtesting on non-standard chart types if it produces unrealistic results? That’s somewhat like asking a hammer manufacturer why it makes hammers if hammers can hurt you. We believe it’s a trader’s responsibility to understand the tools he is using. Takeaways • Non-standard charts are not bad per se, but they can be badly used. • TV backtesting on non-standard charts is not broken and doesn’t require fixing. Traders asking for a fix are in dire need of learning more about trading. We recommend they stop trading until they understand why. • Stay away from—even better, report—any vendor presenting you with strategies running on non-standard charts and implying they are showing reliable results. • If you don’t understand everything we discussed, don’t use non-standard charts at all. • Study carefully how non-standard charts are built and the inevitable compromises used in calculating them so you can understand their limitations. Thanks to @allanster and @mortdiggiddy for their help in editing this description. Look first. Then leap.
Strategi Pine Script™
oleh PineCoders
49