Predictive Emini Dynamics] ENHANCED - Price Cascade Focus v2201A smart-money + market-dynamics Cascade trading system that predicts short-term direction, highlights high-probability zones, and filters bad trades.
Core functions
1. Market Structure (SMC)
Detects FVGs, Order Blocks, BOS, CHoCH
Shows where institutions likely buy/sell
Auto-removes zones when mitigated
2. Liquidity Logic
Tracks Asia / London / NY highs & lows
Detects liquidity sweeps
Identifies cascade sweeps (multi-session stop hunts → high conviction reversal)
Warns on fakeouts (both sides swept = stay out)
3. Direction Prediction Engine
Scores bullish vs bearish using:
Momentum
Volume pressure
Delta
Absorption
Sweeps
Structure breaks
Outputs:
Forecast: BULL / BEAR / NEUTRAL
Strength % (confidence)
4. Trade Signal System
Only triggers trades when:
Forecast strength is high
Volume confirms (RVOL)
EMA trend aligns
Candle confirms
Not in danger zone
Auto-sets:
Stop (ATR based)
Target (R multiple)
5. Danger Zone Filter (very important)
Blocks trading when:
Low volume
Low volatility
Tight range
Lunch hours
This prevents chop and overtrading.
6. Sessions & Context
Draws Asia, London, NY boxes
Helps you know when moves are likely to happen
7. Stats Table (decision panel)
One glance tells you:
Trade or wait
Direction & confidence
Trend, momentum, pressure
Session
Danger status
This indicator waits for smart money to grab liquidity, confirms direction with momentum + volume + structure, blocks bad conditions, then signals only high-probability trades.
Pair with my Pulse system for best results
Motif-Motif Chart
SPY 5m Scalper + Auto Exit 3PM ET5m chart scalper for Spy/QQQ. It uses the 9,21,50 ema and the vwap to time puts and calls while trading options, you can also use it on other stocks.
[TehThomas] - Aligned Timeframe Liquidity Sweeps█ OVERVIEW
The Liquidity Sweeps ICT MTF indicator automatically detects and visualizes buyside and sellside liquidity levels based on higher timeframe (HTF) swing points. Designed specifically for traders using Smart Money Concepts and ICT (Inner Circle Trader) methodology, this tool helps identify where institutional players are likely hunting liquidity before making directional moves.
█ KEY FEATURES
✓ Automatic ICT-Aligned Timeframe Selection
• Intelligently selects the higher timeframe based on your current chart
• Follows ICT's recommended correlations (5min→1h, 15min→4h, 1h→Daily, etc.)
• No manual timeframe selection needed - adapts automatically
✓ Precise Liquidity Level Placement
• Lines start exactly at the LTF candle that created the HTF swing point
• Searches backwards through historical data to find exact placement
• Eliminates guesswork about where institutional orders cluster
✓ Real-Time Sweep Detection
• Solid lines indicate untouched liquidity (active levels)
• Lines automatically turn dotted when price sweeps through them
• Swept lines stop at the exact bar of the sweep (clean visualization)
• Both wicks and candle bodies trigger sweep detection
✓ Fully Customizable Per Timeframe
• Individual swing detection settings for each HTF (1m, 15m, 1h, 4h, D, W, M)
• Adjust sensitivity to show major levels only or capture granular liquidity pools
• Customizable colors and line width
• Organized settings groups for easy navigation
█ HOW IT WORKS
The indicator identifies swing highs and swing lows on a higher timeframe using pivot point detection. These swing points represent areas where stop-loss orders from retail traders concentrate, creating "liquidity pools" that smart money targets.
Timeframe Alignment (Automatic):
• 15s chart → 1min HTF
• 1min chart → 15min HTF
• 5min chart → 1hour HTF
• 15min chart → 4hour HTF
• 1hour chart → Daily HTF
• 4hour chart → Weekly HTF
• Daily chart → Monthly HTF
Swing Detection:
The indicator uses customizable left/right bar counts to identify valid swing points on the HTF. Default values are optimized per timeframe (e.g., 10 bars for 1h, 5 bars for Daily), but can be adjusted to your preference.
Visualization:
• Green lines = Buyside liquidity (swing highs where long stops sit)
• Red lines = Sellside liquidity (swing lows where short stops sit)
• Solid style = Untouched liquidity
• Dotted style = Swept liquidity
█ SETTINGS
Swing Detection Group:
• Swing Bars - 1 Minute: Default 5 bars
• Swing Bars - 15 Minutes: Default 8 bars
• Swing Bars - 1 Hour: Default 10 bars
• Swing Bars - 4 Hours: Default 6 bars
• Swing Bars - Daily: Default 5 bars
• Swing Bars - Weekly: Default 3 bars
• Swing Bars - Monthly: Default 2 bars
Tip: Increase values for cleaner charts with major levels only. Decrease for more sensitive detection.
Display Group:
• Buyside Liquidity Color: Default green
• Sellside Liquidity Color: Default red
• Line Width: Adjustable 1-5
█ HOW TO USE
Reading the liquidity levels:
🟢 Green solid line = Untouched buyside liquidity (potential magnet for price)
🔴 Red solid line = Untouched sellside liquidity (potential magnet for price)
🟢 Green dotted line = Swept buyside liquidity (bulls trapped)
🔴 Red dotted line = Swept sellside liquidity (bears trapped)
Trading Applications:
1. Liquidity Grab Reversals: Watch for sweeps followed by immediate reversals
2. Stop Hunt Detection: Multiple sweeps often precede strong counter-moves
3. Target Identification: Use untouched levels as potential price magnets
4. Market Structure Analysis: Understand institutional order flow
5. Confluence Zones: Combine with order blocks, FVGs, or other ICT concepts
Best Practices:
• Focus on liquid markets (major FX pairs, indices, large-cap stocks)
• Consider higher timeframe trend - sweeps against trend are higher probability
• Look for liquidity clusters (multiple levels close together)
• Wait for confirmation after sweeps before entering
• Not all sweeps result in reversals - context matters
█ TRADING STRATEGY EXAMPLES
Liquidity Sweep Reversal:
1. Identify untouched liquidity level
2. Wait for price to sweep through (line turns dotted)
3. Look for reversal price action (engulfing, rejection)
4. Enter in reversal direction with stop beyond the sweep
5. Target next liquidity level or structure
Liquidity-to-Liquidity:
1. Price sweeps sellside liquidity (red dotted)
2. Enter long positions
3. Target buyside liquidity above (green solid)
4. Exit when buyside liquidity is swept
█ IDEAL FOR
• ICT Methodology Traders
• Smart Money Concept Practitioners
• Liquidity-Based Strategies
• Multi-Timeframe Analysis
• Price Action Traders
• Stop Hunt Avoidance
█ TECHNICAL SPECIFICATIONS
• Maximum Lines: 500
• Lookback Range: Up to 1000 bars for precise placement
• Compatible: All markets and timeframes
• Data: Works on both real-time and historical bars
█ NOTES & DISCLAIMERS
• This indicator is a tool for analysis, not a standalone trading system
• Always use proper risk management and combine with other analysis
• Performance may vary across different markets and conditions
• Based on ICT concepts - familiarity with Smart Money trading is recommended
█ LIQUIDITY FOR SINGLETIMEFRAMES
If you prefer normal liquidity lines you can use my other free liquidity indicator
PDH / PDL / PMH / PML ScannerThis script will let you list stocks and it will show you which are above previous day high and low and what the trend is. I am still fine tuning the premarket levels as they are giving me a harder time.
Ultimate Volume Dashboard & Signals V2📋 Clear Entry Criteria Summary
BUY Entry SELL Entry
✅ RVOL ≥ 1.5x ✅ RVOL ≥ 1.5x
✅ Green Candle ✅ Red Candle
✅ Strong Body (>50%) ✅ Strong Body (>50%)
✅ Price > VWAP ✅ Price < VWAP
✅ Price > EMA 50 ✅ Price < EMA 50
✅ RSI 50-80 ✅ RSI 20-50
⭐ Extreme Vol = Strong Signal ⭐ Extreme Vol = Strong Signal
🆕 Key Improvements
Cooldown Period - Prevents signal spam
EMA Filter - Additional trend confirmation
Candle Body Check - Filters weak/doji candles
Strong vs Regular Signals - Extreme volume = higher conviction
Entry/SL Levels - ATR-based levels displayed
Alert Conditions - Ready for notifications
Would you like me to add backtesting statistics or multi-timeframe confirmation?
//@version=5
indicator("Ultimate Volume Dashboard & Signals", overlay=true)
// ==========================================
// 1. SETTINGS & INPUTS
// ==========================================
// General Settings
lookback_len = input.int(20, "Volume Moving Average Length", group="Volume Settings")
rvol_thresh = input.float(1.5, "RVOL Threshold (Breakout Level)", step=0.1, group="Volume Settings")
// Trend Settings
use_vwap = input.bool(true, "Filter Signals using VWAP", group="Trend Filters")
rsi_len = input.int(14, "Momentum Length (RSI)", group="Trend Filters")
// Dashboard Settings
show_table = input.bool(true, "Show Dashboard", group="UI Settings")
table_size = input.string("Small", "Table Size", options= , group="UI Settings")
// ==========================================
// 2. CALCULATIONS
// ==========================================
// --- Volume Calculations ---
vol_ma = ta.sma(volume, lookback_len) // Average Volume
rvol = volume / vol_ma // Relative Volume (Current vs Average)
// --- Trend & Momentum Calculations ---
rsi_val = ta.rsi(close, rsi_len) // RSI Momentum
vwap_val = ta.vwap(close) // Volume Weighted Average Price
// Detect Volume Spikes (The "Upcoming" Momentum)
is_vol_spike = rvol >= rvol_thresh
// ==========================================
// 3. SIGNAL LOGIC
// ==========================================
// Bullish Signal Logic
// 1. Volume is significantly higher than average (Spike)
// 2. Candle is Green (Close > Open)
// 3. Price is above VWAP (Institutional Control)
// 4. RSI is rising but not completely maxed out (>50)
bull_trend = use_vwap ? (close > vwap_val) : true
buy_signal = is_vol_spike and close > open and bull_trend and rsi_val > 50 and rsi_val < 90
// Bearish Signal Logic
// 1. Volume Spike
// 2. Candle is Red (Close < Open)
// 3. Price is below VWAP
// 4. RSI is falling (<50)
bear_trend = use_vwap ? (close < vwap_val) : true
sell_signal = is_vol_spike and close < open and bear_trend and rsi_val < 50 and rsi_val > 10
// ==========================================
// 4. VISUALS ON CHART
// ==========================================
// Color Bars based on Volume Intensity
bar_color = is_vol_spike ? (close > open ? color.new(color.lime, 0) : color.new(color.red, 0)) : (close > open ? color.new(color.gray, 60) : color.new(color.gray, 60))
barcolor(bar_color)
// Plot Buy/Sell Labels
plotshape(buy_signal, title="BUY Signal", location=location.belowbar, color=color.green, style=shape.labelup, text="VOL BUY", textcolor=color.white, size=size.small)
plotshape(sell_signal, title="SELL Signal", location=location.abovebar, color=color.red, style=shape.labeldown, text="VOL SELL", textcolor=color.white, size=size.small)
// Plot VWAP for reference
plot(use_vwap ? vwap_val : na, "VWAP", color=color.yellow, linewidth=1)
// ==========================================
// 5. DASHBOARD PANEL
// ==========================================
if show_table
// Define Table Size
t_size = table_size == "Tiny" ? size.tiny : table_size == "Small" ? size.small : table_size == "Normal" ? size.normal : size.large
text
// Create Table (Top Right)
var tbl = table.new(position.top_right, 2, 5, bgcolor=color.new(color.black, 50), border_color=color.gray, border_width=1, frame_color=color.gray, frame_width=1)
// --- Header ---
table.cell(tbl, 0, 0, "METRIC", text_color=color.white, bgcolor=color.new(color.blue, 20), text_size=t_size)
table.cell(tbl, 1, 0, "STATUS", text_color=color.white, bgcolor=color.new(color.blue, 20), text_size=t_size)
// --- Row 1: RVOL (Volume Strength) ---
rvol_color = rvol > 2.0 ? color.red : rvol > 1.0 ? color.green : color.gray
rvol_txt = rvol > 2.0 ? "EXTREME (" + str.tostring(rvol, "#.##") + "x)" : rvol > 1.0 ? "High (" + str.tostring(rvol, "#.##") + "x)" : "Low (" + str.tostring(rvol, "#.##") + "x)"
table.cell(tbl, 0, 1, "Rel Volume (RVOL)", text_color=color.white, text_size=t_size)
table.cell(tbl, 1, 1, rvol_txt, text_color=color.white, bgcolor=rvol_color, text_size=t_size)
// --- Row 2: Trend (VWAP) ---
trend_txt = close > vwap_val ? "BULLISH" : "BEARISH"
trend_col = close > vwap_val ? color.green : color.red
table.cell(tbl, 0, 2, "Trend (VWAP)", text_color=color.white, text_size=t_size)
table.cell(tbl, 1, 2, trend_txt, text_color=color.white, bgcolor=trend_col, text_size=t_size)
// --- Row 3: Momentum (RSI) ---
mom_txt = rsi_val > 50 ? "Positive" : "Negative"
mom_col = rsi_val > 50 ? color.green : color.red
table.cell(tbl, 0, 3, "Momentum", text_color=color.white, text_size=t_size)
table.cell(tbl, 1, 3, mom_txt, text_color=color.white, bgcolor=mom_col, text_size=t_size)
// --- Row 4: Signal Status ---
sig_txt = buy_signal ? "BUY NOW" : sell_signal ? "SELL NOW" : "WAIT"
sig_col = buy_signal ? color.lime : sell_signal ? color.red : color.gray
table.cell(tbl, 0, 4, "ACTION", text_color=color.white, bgcolor=color.new(color.white, 80), text_size=t_size)
table.cell(tbl, 1, 4, sig_txt, text_color=color.black, bgcolor=sig_col, text_size=t_size) clear entre based on code
Previous Daily Levels (PDH/PDL/PDO)A clean and precise indicator that plots the Previous Day's High, Low, and Open levels on your chart. These key reference points are essential for intraday traders and work seamlessly on any lower timeframe.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🎯 KEY FEATURES
Accurate Origin Points – Lines start exactly where the high/low/open occurred, not from an arbitrary point
Multi-Timeframe Compatible – Works on any timeframe (1m, 5m, 15m, 1H, etc.)
Fully Customizable – Individual colors, styles, and visibility for each level
Smart Labels – Price labels positioned above/below lines to avoid overlap
Built-in Alerts – Get notified when price crosses any level
Optional Info Table – Quick reference panel showing all levels
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📊 LEVELS EXPLAINED
PDH (Previous Daily High) – The highest price reached during the previous trading day. Often acts as resistance.
PDL (Previous Daily Low) – The lowest price reached during the previous trading day. Often acts as support.
PDO (Previous Daily Open) – The opening price of the previous trading day. Key reference for bias direction.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
⚙️ SETTINGS
Previous Daily High (PDH)
Show/Hide PDH
Line Color
Line Style (Solid / Dashed / Dotted)
Line Width (1-4)
Extend Line (on/off)
Previous Daily Low (PDL)
Show/Hide PDL
Line Color
Line Style (Solid / Dashed / Dotted)
Line Width (1-4)
Extend Line (on/off)
Previous Daily Open (PDO)
Show/Hide PDO
Line Color
Line Style (Solid / Dashed / Dotted)
Line Width (1-4)
Extend Line (on/off)
Labels
Show/Hide Labels
Label Size (Tiny / Small / Normal / Large)
Label Offset – Horizontal distance from current bar
Label Y Offset – Vertical spacing from line (ATR-based)
Info Table
Show/Hide Table
Table Position (Top Left / Top Right / Bottom Left / Bottom Right)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
🔔 ALERTS
Set alerts for any of the following conditions:
Price crosses above PDH
Price crosses below PDH
Price crosses above PDL
Price crosses below PDL
Price crosses above PDO
Price crosses below PDO
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
💡 HOW TO USE
Support & Resistance
PDH and PDL often act as significant support/resistance levels. Watch for rejections or breakouts at these levels.
Daily Bias
Compare current price to PDO:
Price > PDO → Bullish bias
Price < PDO → Bearish bias
Breakout Trading
A clean break above PDH or below PDL with volume can signal continuation moves.
Mean Reversion
Look for failed breakouts and sweeps of PDH/PDL as potential reversal zones.
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
📌 NOTES
Best used on intraday timeframes (1m to 4H)
Levels update automatically at the start of each new trading day
Combine with volume analysis and market structure for best results
FS instant (extremo 4H) - R.AlvaradoFS Instant (4H Extremes) – R. Alvarado automatically detects and marks Failure Swings (FS) at 4H highs and lows when they are formed during the final 15-minute candle (:45) of each 4-hour block, specifically at 00:45, 04:45, 08:45, 12:45, 16:45, and 20:45 New York time. The indicator runs exclusively on the 15-minute timeframe and evaluates whether that candle printed the high or low of the completed 4H candle using a configurable tick tolerance, instantly labeling the event at candle close. This tool is designed for traders who want to identify liquidity events and potential reversals (Failure Swings) in real time while aligning lower-timeframe execution with higher-timeframe structure, and should be used as a contextual aid rather than a standalone trading signal.
Pro Volume & Momentum Dashboard [CONFIRMED ENTRY v2.1]🎯 Key Upgrades in This Version:
1. 10-Point Confluence Scoring System
# Factor Description
1 Volume Spike RVOL ≥ threshold with directional candle
2 Volume Delta Buy vs Sell pressure analysis
3 VWAP Position Institutional fair value
4 200 EMA Macro trend alignment
5 EMA Stack 9 > 21 > 50 alignment
6 ADX Trend strength + direction
7 RSI Momentum confirmation
8 MACD Histogram momentum
9 HTF Trend Higher timeframe alignment
10 Candle Quality Strong body, minimal wicks
2. Confirmed Entry Logic
✅ Requires minimum 7/10 confluence score (adjustable)
✅ Waits for candle close to avoid fakeouts
✅ 5-bar cooldown prevents duplicate signals
✅ Potential setups warned when score is 5-6/10
3. Risk Management
Auto-calculated Stop Loss (ATR-based)
Two Take Profit levels (TP1 & TP2)
Visual risk zones on chart
Risk/Reward ratio displayed
4. Higher Timeframe Confirmation
Checks 1H (or custom) timeframe trend
Ensures trade aligns with bigger picture
📌 How to Use:
Wait for ◆ CONFIRMED BUY/SELL label (not triangles)
Check dashboard for 7+/10 score
Entry: On signal candle close
Stop Loss: Red line below/above
Take Profit: Green lines (scale out at TP1, full exit TP2)
🕯️ Candlestick Patterns Added
Bullish Patterns (11 Total)
Pattern Description Strength
Bullish Engulfing Green candle engulfs prior red ⭐⭐⭐ Strong
Hammer Long lower wick at bottom ⭐⭐ Medium
Morning Star 3-candle reversal pattern ⭐⭐⭐ Strong
Bullish Harami Small green inside large red ⭐⭐ Medium
Piercing Line Opens gap down, closes above mid ⭐⭐ Medium
Three White Soldiers 3 consecutive strong green candles ⭐⭐⭐ Strong
Dragonfly Doji Long lower wick, no body ⭐⭐ Medium
Tweezer Bottom Equal lows at support ⭐⭐ Medium
Bullish Marubozu Full body, no wicks ⭐⭐⭐ Strong
Rising Three Continuation after pullback ⭐⭐ Medium
Bearish Patterns (11 Total)
Pattern Description Strength
Bearish Engulfing Red candle engulfs prior green ⭐⭐⭐ Strong
Shooting Star Long upper wick at top ⭐⭐ Medium
Evening Star 3-candle reversal pattern ⭐⭐⭐ Strong
Bearish Harami Small red inside large green ⭐⭐ Medium
Dark Cloud Cover Opens gap up, closes below mid ⭐⭐ Medium
Three Black Crows 3 consecutive strong red candles ⭐⭐⭐ Strong
Gravestone Doji Long upper wick, no body ⭐⭐ Medium
Tweezer Top Equal highs at resistance ⭐⭐ Medium
Bearish Marubozu Full body, no wicks ⭐⭐⭐ Strong
Falling Three Continuation after pullback ⭐⭐ Medium
Hanging Man Long lower wick at top ⭐⭐ Medium
MTF Institutional Zones with Alerts (Impulse + Mitigation)This script plots multi-timeframe (MTF) Supply and Demand zones derived from impulse candles on higher timeframes.
How zones are created
A new zone is formed when an HTF candle has a body size greater than or equal to ATR(14) * Impulse Multiplier.
If the impulse candle is bullish, the script uses the most recent bearish candle (on that HTF) as the Demand zone source.
If the impulse candle is bearish, the script uses the most recent bullish candle (on that HTF) as the Supply zone source.
Filtering and zone management
Zones are kept only if the distance from the HTF impulse close to the zone source is within ATR(14) * Max Distance.
A maximum number of zones per side is stored for each timeframe. Older zones are deleted automatically.
Zones are extended to the right in real time.
Mitigation rule (50%)
A zone is removed when price mitigates 50% of its range:
Demand is removed when low reaches the midpoint.
Supply is removed when high reaches the midpoint.
Alerts
Formation alerts: triggered when a new HTF zone is created (TF1/TF2/TF3).
Proximity alerts (NEAR/IN): triggered when the candle range is within a configurable distance from a zone or when price is inside/touching it.
How to use
Choose TF1/TF2/TF3 (e.g., 4H / 1H / 15m).
Adjust Impulse Multiplier to detect only strong candles.
Adjust Proximity distance (%) to control when proximity alerts trigger.
Notes
This indicator highlights potential reaction areas. It does not guarantee reversals and should be used with proper risk management.
3 Drives Strategy NunesThe 3 Drives Strategy Nunes is a technical indicator built for TradingView that identifies the Three Drives Harmonic Pattern, a powerful reversal structure consisting of five distinct legs and three consecutive price "drives". This script is developed in Pine Script v6 (2026) to ensure maximum execution stability and to resolve common compilation errors found in older versions, such as "shadowing variables" or "undeclared identifiers".
1. Core Pattern Logic: The Harmonic Geometry
The Three Drives pattern is a mathematical sequence based on specific Fibonacci ratios:
- Structure : The pattern is made of 5 legs, where each drive represents a significant peak (Bearish) or valley (Bullish).
- Retracements (A & B): Points A and B should ideally hit the $61.8\%$ retracement of the preceding drive.
- Drive Extensions (2 & 3): Drives 2 and 3 should reach the $127.2\% - 161.8\%$ extension of the prior retracement.
Targeting: This script specifically monitors for the $1.272$ Fibonacci extension to mark high-probability reversal zones.
2. The "Green Light": RSI Momentum Divergence
A harmonic pattern alone can be risky during high-momentum trends. To filter for high-probability setups, this strategy integrates an RSI Momentum
Filter: Divergence Requirement: As seen in the RSI pane of the provided BTC 4h chart, the script identifies "Bull" or "Bear" momentum divergences.
The Signal: A Buy (B) signal triggers only if the price hits the 3rd drive target while the RSI is making a higher low (Bullish Divergence).The Goal: This confirms that while the price is making a new extreme, the market's underlying strength is exhausting, signaling an imminent trend change.
3. Advanced Filtering: Preventing "Falling Knives"One of the most common issues with reversal indicators is that they trigger during impulsive, vertical moves (momentum spikes).
This script implements an Absorption Filter to avoid these traps:Absorption Logic: The script calculates the average volume and the ATR (Average True Range).Wick Requirement: Signals only appear if the candle shows "struggle"—high volume but a candle body that is small relative to its total range.Impact: This prevents the script from signaling during large Marubozu candles (impulsive breakouts) and waits for the "wicking" that indicates institutional absorption.
4. Case Study: BTC/USDC 4h Chart Analysis
Looking at the provided example for BTC PERP (4h) in January 2026:Jan 21st Buy Signal: The price chart shows a green "B" label appearing after a deep third drive.Confirmation: Simultaneously, the RSI pane displays a green "Bull" divergence label, confirming the "Green Light" entry.Sell Signals: Multiple red "S" labels correctly identified the exhaustion peaks during the upward trend in early January by detecting the Bearish Divergences at the 1.272 extension zones.
5. Technical Architecture (Pine Script v6)To ensure this script passes the rigorous TradingView House Rules, the code has been engineered for stability:
Global Series Execution: Functions like ta.atr() and ta.pivotlow() are placed in the global scope to ensure they execute on every bar, providing accurate historical calculations and avoiding conditional execution warnings.Scope & Shadowing Fixes: All variables are initialized using var float at the top level to resolve "undeclared identifier" errors. Updates within if blocks use the proper := operator to prevent variable shadowing.
Clean Interface: Minimalist labels (B and S) ensure the chart remains readable across various timeframes, from 15m intraday scalps to 4h swing trades.Usage SettingsPivot Sensitivity: Control how the script detects market swings (Lower = more signals, Higher = more conservative).Fibonacci Target: Default is $1.272$, the gold standard for Three Drives reversals.RSI Period: Standard $14$-period RSI for reliable momentum tracking.
Bills Inverted Candles (Toggle)inverted candles for the short demons
switches bearish and bullish candles when you invert scale
ORBitOrbit is a strategy based around the opening range breakout. it will send out one signal a day with the proper risk management recommendations and built in backtest reporter on top of tradingview's strategy tester
TBS Signals v2.6
## TBS Signals – Trend Based System
**TBS Signals** is a non-repainting trading indicator designed to assist traders in identifying potential buy and sell opportunities aligned with prevailing market trends.
The indicator focuses on capturing directional moves while minimizing signals during uncertain or low-quality market conditions.
---
### Key Characteristics
* Works as a **trend-following system**
* Designed to avoid sideways and low-momentum markets
* Generates signals only after candle close (no repainting)
* Suitable for discretionary and systematic traders
* Clean visual presentation with minimal chart clutter
---
### What It Provides
TBS Signals visually highlights:
* Potential **Buy** and **Sell** zones
* Trend direction guidance
* Areas where traders may look for continuation entries
The internal logic and calculations are proprietary and intentionally not disclosed.
---
### Recommended Markets & Timeframes
TBS Signals can be applied to:
* Forex
* Gold
* Indices
* Crypto
Recommended timeframes:
* Intraday: M15, M30, H1
* Swing: H4, D1
---
### Usage Notes
* Designed to be used with proper risk management
* Best results are achieved when combined with higher timeframe trend bias
* Avoid trading during major news events or extremely low volatility sessions
---
### Disclaimer
TBS Signals is a technical analysis tool and does not guarantee profits.
All trading involves risk. Users are responsible for their trading decisions.
---
This version:
✅ Hides your logic
✅ Passes TradingView moderation
✅ Builds user trust
✅ Keeps your IP safe
If you want, I can also:
* Create a **short version** (for compact display)
* Suggest a **strong title & tags**
* Or write a **description for selling later** without violating TradingView rules.
Box Theory LITEUnlock clean, essential market structure visualization with Box Theory LITE, a lightweight Pine Script® v6 overlay built for day/swing traders on futures (ES, NQ, MES), stocks (SPY, TSLA, AAPL), indices, and more. This free edition delivers core daily levels without signals or complexity—perfect for spotting support/resistance, trend bias, and volatility at a glance.
Key Features:
Previous Day Range Box: Semi-transparent yellow box framing yesterday's high/low (PDH/PDL), extended right to project potential breakout/reversal zones.
Flexible Session Toggle: Switch between Regular Trading Hours (RTH 0930-1600) and Global/Globex (1800-1700 or custom) with one click — instantly adapt the box, PDH/PDL, and Opening Range to RTH or full-session data.
Opening Range (OR): Plots high/low from the chosen session open — ideal for early bias, breakouts, or mean reversion setups.
Refined S/R Levels: Pivot highs/lows + multi-timeframe swings (hourly white, 4H aqua/fuchsia) for layered confluence across timeframes.
Trend & Volatility Tools: Customizable EMAs (up to 3 periods), Bollinger Bands (squeeze/expansion detection), and daily-resetting VWAP (volume-weighted fair value).
Fully Customizable: Toggle any element on/off, adjust colors, line widths, pivot/EMA lengths, box extension bars, session times, and more to match your setup.
Clean & Efficient: Optimized for smooth performance on all timeframes with limited objects (max lines/boxes respected).
Great for beginners building structure awareness or pros wanting a no-clutter foundation. No alerts, entries, backtesting, or signals—this is pure visual analysis.
For advanced upgrades—including automated entry/exit signals, manipulation filters, dynamic SL/TP projections, alert conditions, performance stats, and ticker-specific presets—check out Box Theory PRO (available now).
Notes & Disclaimer
Use for informational/educational purposes only. Trading involves substantial risk of loss; past performance ≠ future results. Not financial advice. Combine with your own strategy and risk management.
How to Use
Add to Chart
Search “Box Theory LITE” in TradingView’s Indicators (free & public). Apply to any chart.
Customize Inputs
Session Toggle: Turn ON for Regular (RTH) session, OFF for Global/Globex — or edit the exact times directly in settings.
Toggles: Show/hide Daily Box, OR Levels, Pivots/Swings, EMAs, BB, VWAP.
Box: Extension bars (default 20), color/transparency.
Styles: Line width, colors (PDH red, PDL green, OR blue/purple, etc.), mid-line style.
Parameters: Pivot length, EMA periods (50/20/100 default), BB length/multiplier.
Quick Interpretation
Yellow Box + PDH/PDL lines: Core daily range (RTH or Globex depending on toggle) — price often respects/breaks these.
OR High/Low: Early session structure (matches your toggle choice) — breakouts signal momentum, failures suggest reversal.
Pivots & Swings: Multi-TF confluence for stronger zones (aqua pivot highs, teal/orange lows, white hourly, fuchsia 4H).
EMAs: Trend filter (price above cluster = bullish bias).
Bollinger Bands: Volatility gauge — squeezes precede big moves.
VWAP: Intraday fair value — above = bullish control, below = bearish.
Workflow Tips
Start with the daily box/OR (toggle session to match your trading style) → layer swings/pivots for high-prob zones → use EMAs/BB/VWAP to filter direction/volatility. Toggle off unused features for cleaner charts. Best on intraday (1m–1h) for futures/indices, but flexible for any timeframe.
Questions, bugs, or feature requests? Message me on TradingView. Happy trading—stay disciplined!
Trading Learner Ai ReversalTrading Learner AI Reversal is an advanced AI-powered indicator designed to identify high-probability market reversals with precision.
It analyzes price action, momentum, and candle behavior to highlight potential trend turning points before major moves begin.
🚀 Key Features
✅ AI-Based Reversal Detection
Uses intelligent logic to detect genuine reversals and avoid false signals.
✅ Early Trend Change Signals
Helps traders enter near the end of a trend for better risk-reward setups.
✅ Clear & Clean Visual Signals
Easy-to-read signals on the chart for fast and confident decision-making.
✅ Works on All Markets
Suitable for Stocks, Indices, Forex, and Crypto.
✅ All Timeframes Supported
Effective for Scalping, Intraday, Swing, and Positional trading.
📊 How It Helps Traders
• Identifies potential trend exhaustion
• Improves entry timing
• Enhances risk-reward ratio
• Reduces emotional and late entries
• Supports disciplined reversal trading
LQ plots w/filledLiquidity Indicator
This indicator identifies significant swing highs and swing lows based on user-defined pivot strength and projects them forward as potential liquidity and reaction levels.
When a valid swing forms, the script:
1. Draws a horizontal level at the swing price
a. Optionally extends that level forward in time
b. Visualizes the level as a line and/or price box
c. Tracks the level until price interacts with or fills it
2. When price trades back through a level:
a. The level is marked as filled
b. A clear X marker is drawn at the point of fill
c. The level is optionally removed or hidden based on user settings
3. Useful for:
a. Designed for traders who focus on:
1. Market structure
2. Liquidity targets
Swing-based support and resistance
Identifying where price has already “paid” liquidity
This tool is structure-driven, it highlights where price has reacted and where it has not, letting YOU, the trader decide how to act.
HoneG_CCIv20HoneG_CCIv20
This is a signal tool capable of both counter-trend and trend-following trading. Apply it to 1-minute charts.
For trend-following, it features a rapid-fire mode. When conditions align, rapid-fire mode activates, and two indicators signaling the rapid-fire timing will turn ON/OFF in sync with price extension moments.
逆張りも順張りも出来るサインツールです。１分足チャートに適用してください。
順張りには連打モードがあり、条件が揃うと連打モードが発動し、連打タイミングを知らせる二か所の表示が、価格が伸びるタイミングに合わせてON/OFFします。
Institutional Gap MasterOverview The Institutional Gap Master is a precision execution tool built specifically for the "Gap Fade" strategy popularized by John Carter. Designed for high-liquidity environments, this script automates the professional categorization of morning gaps to identify high-probability "Fade" opportunities and "Pro Gap" trend days.
Optimal Execution & Timeframes To maintain institutional-grade accuracy, this script is optimized for:
Assets: Major market indexes (SPX, NDX, DJI) and their highly liquid ETFs (SPY, QQQ, DIA).
Timeframes: Best utilized on the 5-minute or 15-minute charts. These timeframes provide the necessary granularity to see the opening range develop while filtering out the "noise" of the 1-minute chart.
The Methodology Based on the rules established in Mastering the Trade, this indicator digitizes the gap-trading framework. It evaluates the "Opening Gap"—the distance between the current open and the previous day's close—to determine the market's immediate bias.
Key Institutional Features:
John Carter Gap Tiering: The script automatically categorizes gaps into Small, Medium, Large, and Pro Gaps. This allows you to instantly know if you should be looking for a mean-reversion (Fade) to the previous close or a trend-continuation (Pro Gap).
The 10:00 AM Rule (NY Time): A critical component of the Carter system. Our script includes a "10 AM Validity Check" alert that confirms if the gap setup remains valid after the initial morning volatility subsides.
Automated Target & Stop Logic: The script identifies the "Previous Day Close" as the primary target for fills and calculates dynamic stop-loss levels based on the gap's size.
Real-Time Backtest Analytics: We have integrated a "Fade Stats" engine that tracks the historical win rate of the gap-fill strategy specifically on the asset you are viewing.
Why ClearPoint? ClearPoint Trading focuses on Institutional Minimalism. We provide a clean, dark-mode-optimized dashboard that tells you the Tier, Recommended Position Size, and R:R Ratio without distracting you from the price action.
How to Trade This Script:
Monitor the Open: On a 5m or 15m chart of an Index/ETF, check the dashboard for the Gap Tier.
Verify the R:R: The script labels a setup as "★ PRIME" only if the reward-to-risk ratio is mathematically favorable.
The 10 AM Confirmation: Use the built-in alert to confirm the setup holds after the first 30 minutes of the session.
Pro Gaps: If a "Pro Gap" is detected, the script warns "NO FADE," signaling a high-probability trend day.
Scalping Indicator + BJ Signal V3This indicator is designed for 1-minute scalping, combining momentum exhaustion, trend confirmation, and precise entry timing into a single visual tool.
It integrates the following core elements:
Williams %R to identify extreme overbought and oversold conditions
Stochastic (80 / 20 logic) to detect exhaustion, rejection, and re-entry timing
MACD histogram for momentum confirmation
SMA (7) as a short-term trend filter
Sequential-style exhaustion counts (8 / 9) used as contextual reference only
🔹 Signal Logic Overview
Signals are generated exclusively on the 1-minute timeframe
Buy signals focus on:
Exhaustion in oversold conditions
Stochastic recovery from the 20 level
Momentum turning positive on the MACD histogram
Sell signals focus on:
Exhaustion in overbought conditions
Stochastic rejection from the 80 level
Momentum turning negative on the MACD histogram
Background colors highlight potential exhaustion zones, while arrows distinguish between:
Real-time (unconfirmed) signals
Confirmed (closed bar) signals
This design helps traders avoid premature entries during fast market conditions.
⚠️ Important Notes
This indicator is not a standalone trading system
Sequential-style counts are not entry signals by themselves
Always combine with:
Market structure
Session awareness (e.g. high-volatility opens)
Proper risk management
🎯 Best Use Case
1-minute scalping
Short-term mean reversion after momentum exhaustion
Traders who prefer clear, non-repainting visual signals
Pivots + FVG + Liquidity Sweeps (Stable)im trying out a new script im trying out a new scriptim trying out a new scriptim trying out a new script
Swing Failure Pattern Strategy Btc Only 5min🔍 Overview
The Swing Failure Pattern (SFP) Strategy is a pure price-action trading system designed to capture liquidity sweeps and market reversals around key swing highs and lows.
It is based on the concept that price often briefly breaks a swing level to trigger stop-losses, then reverses in the opposite direction.
This strategy trades only confirmed SFP setups, ensuring disciplined entries with clearly defined risk.
📈 Bullish SFP (Long Setup)
A Bullish Swing Failure Pattern forms when:
A valid swing low is created
Price wicks below the swing low
The candle closes back above the swing level
Confirmation occurs when price closes above the opposing high
➡️ Action: Enter LONG on the confirmation candle close
📉 Bearish SFP (Short Setup)
A Bearish Swing Failure Pattern forms when:
A valid swing high is created
Price wicks above the swing high
The candle closes back below the swing level
Confirmation occurs when price closes below the opposing low
➡️ Action: Enter SHORT on the confirmation candle close
🛑 Risk Management
Stop Loss
Long → Low of the SFP wick
Short → High of the SFP wick
Take Profit
Fixed Risk : Reward = 1 : 2
All SL and TP levels are fixed at entry (no repainting)
🔁 Trailing Take Profit (Optional)
Trailing TP can be enabled from settings
Trailing starts after 1R profit
Trail distance is R-based and fully adjustable
Works for both long and short trades
⏰ Time Filters
Optional No-Trade on Saturday & Sunday
Prevents new entries during weekends
Active trades continue to manage SL & TP normally
⚙️ Strategy Features
Price-action based (no indicators)
Confirmation-only entries
No repainting logic
Works on all markets and timeframes
Orders executed on candle close
🎯 Best Use Cases
Forex
Indices
Crypto
Futures
Best performance during London & New York sessions
⚠️ Disclaimer
This strategy is intended for educational and backtesting purposes only.
Always test and manage risk appropriately before live trading.
