Enigma Unlocked 2.0Description for "Enigma Unlocked 2.0" Pine Script Indicator
Overview
Enigma Unlocked 2.0 is an advanced and highly customizable indicator designed to deliver actionable buy and sell signals by leveraging precise candlestick logic during specific market transitions. This indicator is built for flexibility, helping traders identify high-probability trade setups during key trading periods, specifically the transitions between the Asian Kill Zone and London Kill Zone as well as the London Kill Zone and New York Kill Zone on the 30-minute timeframe.
By combining Enigma Unlocked 2.0 with the ICT Killzones & Pivots indicator, traders can gain a deeper understanding of the timing and location of these transitions. Waiting for signals during these defined kill zones increases the likelihood of finding high-probability trade setups.
How to Use
Follow the Kill Zone Transitions:
Use the ICT Killzones & Pivots indicator to clearly visualize the boundaries of the Asian, London, and New York kill zones.
Focus on the signals generated by Enigma Unlocked 2.0 that align with these kill zone transitions.
Plotting Entries and Targets with Gann Box:
For Buy Signals:
Use the Gann Box tool to mark the high and low of the signal candle.
Ensure your Gann Box settings include only the 50%, 0%, and 100% levels.
Your entry zone lies between the 50% and 100% levels (discount zone). This is where buy trades are expected to offer an optimal risk-reward ratio.
For Sell Signals:
Similarly, plot the Gann Box on the high and low of the signal candle.
The 50% to 100% zone acts as the premium area for sell trades.
Setting Stop Loss and Targets:
To identify a safe stop loss, split the 50% zone of the Gann Box using another Gann Box.
Draw the secondary Gann Box from 50% to 100% of the initial box, then extend it to double the height.
For sell trades, place the stop loss above the extended 100% level.
For buy trades, place the stop loss below the extended 100% level.
Aim for a minimum of 1:1 risk-to-reward to ensure optimal trade management.
How It Works
Buy Logic:
Buy Logic 1: Detects a bullish candle (close > open) that:
Closes above its midpoint (50% of the candle body).
Has a low lower than the previous candle's low.
Buy Logic 2: Identifies a bearish candle (close < open) that:
Closes above its midpoint (50% of the candle body).
Has a low lower than the previous candle's low.
Sell Logic:
Sell Logic 1: Detects a bearish candle (close < open) that:
Closes below its midpoint (50% of the candle body).
Has a high higher than the previous candle's high.
Sell Logic 2: Identifies a bullish candle (close > open) that:
Closes below its midpoint (50% of the candle body).
Has a high higher than the previous candle's high.
Real-Time Alerts and Visual Cues:
Green triangles below candles indicate buy opportunities.
Red triangles above candles indicate sell opportunities.
Built-in alert conditions notify you of signals in real-time, so you never miss a trading opportunity.
Why Use Enigma Unlocked 2.0?
Precision: Advanced candlestick logic ensures that signals are generated only under optimal conditions.
Session-Based Filtering: Signals occur exclusively during the most active market sessions (kill zones), improving trade quality.
Visualization: Simple yet effective tools like Gann Box integration and clear visual signals make this indicator easy to use and highly effective.
Real-Time Alerts: Stay informed of potential trades even when you're away from your screen.
Enigma Unlocked 2.0 empowers traders to harness the power of candlestick analysis and session-based strategies for disciplined and effective trading. Pair this with a solid understanding of risk management and kill zones to achieve consistent results in your trading journey.
Buysellsignal
SMC LEGEND BUY & SELL SMC Buy Sell Indicator: Comprehensive Explanation and Benefits
The SMC Buy Sell Indicator is a state-of-the-art trading tool designed to empower traders by offering robust technical analysis, automated risk management, and actionable signals. Its all-in-one functionality makes it invaluable for traders who seek to maximize profits, minimize risks, and improve decision-making efficiency. Below is an in-depth exploration of its features, including additional functionalities, practical applications, and why it is indispensable for traders.
1. Shows Signal
The indicator provides precise buy and sell signals based on advanced algorithms that analyze market trends, momentum, and price behavior.
Enhanced Features:
Signals are color-coded (e.g., green for buy, red for sell) to ensure clarity.
Works seamlessly across all markets, including Forex, stocks, commodities, and cryptocurrencies.
Customizable sensitivity settings allow traders to adjust the indicator for different trading styles (scalping, day trading, swing trading).
Practical Use:
Ideal for traders who need straightforward entry and exit points.
Helps in avoiding false breakouts by confirming price action with trend data.
2. Shows Ribbon Cloud (Direction Based on Multiple EMAs)
The ribbon cloud acts as a trend filter, visually indicating the market’s direction and momentum strength using multiple EMAs.
Enhanced Features:
Multi-timeframe support: Traders can view trends from higher timeframes to confirm their trades.
Automatically adjusts to changing volatility to provide stable trend signals.
Includes additional metrics such as slope angle to indicate trend strength.
Practical Use:
Helps traders identify pullbacks and determine whether to enter the trend or wait.
Avoids counter-trend trades, increasing the probability of successful outcomes.
3. SMC Market Structure
This feature integrates Smart Money Concepts to map out institutional trading zones, including break of structure (BOS), liquidity grabs, and order blocks.
Enhanced Features:
Liquidity zones: Highlights areas where stop-loss hunts or institutional movements are likely to occur.
Detects premium and discount zones for optimized trade placement.
Alerts for break of structure and potential trend reversals.
Practical Use:
Offers a roadmap for swing and positional traders to capitalize on institutional moves.
Enhances accuracy by identifying high-probability zones for entry and exit.
4. Shows Top and Bottom
The indicator pinpoints key market reversal zones using data-driven algorithms that combine oscillators, volume spikes, and divergence analysis.
Enhanced Features:
Marks zones of exhaustion where price is likely to reverse.
Includes real-time divergence alerts for further confirmation.
Can differentiate between weak and strong reversal signals.
Practical Use:
Prevents traders from entering trades during market overextension.
Perfect for setting tight stop-loss levels near key reversal points.
5. Take Profit
The indicator’s take-profit feature automatically generates multiple profit-taking levels based on Fibonacci levels, ATR (Average True Range), and market structure.
Enhanced Features:
Allows traders to set partial exit levels (e.g., exit 50% at TP1, 25% at TP2).
Real-time updates ensure targets are adjusted based on current market behavior.
Integration with trailing stop-loss ensures profits are locked in as the market moves.
Practical Use:
Reduces the risk of holding trades for too long and missing peak profitability.
Provides a structured exit strategy, essential for consistent trading success.
---
6. Auto Risk Management
The auto risk management tool simplifies trading by calculating position sizes, stop-loss levels, and risk-reward ratios.
Enhanced Features:
Incorporates dynamic stop-loss placement based on ATR or support/resistance levels.
Customizable risk tolerance ensures it fits any trader’s strategy.
Tracks total exposure across multiple trades to prevent over-leveraging.
Practical Use:
Ideal for managing risk on smaller accounts or volatile markets.
Prevents excessive losses by ensuring risk per trade is consistent.
7. Trailing Stop-Loss
The trailing stop-loss feature automatically adjusts the stop-loss level as the trade moves in the trader’s favor.
Enhanced Features:
Supports both percentage-based trailing stops and fixed-point adjustments.
Integrates with take-profit levels to optimize trade exits.
Customizable settings for aggressive or conservative trailing.
Practical Use:
Protects profits in trending markets by ensuring trades remain open during favorable moves.
Reduces emotional stress by automating exit strategies.
8. Multi-Timeframe Analysis
The indicator supports multi-timeframe analysis, allowing traders to view signals and trends from higher or lower timeframes on a single chart.
Benefits:
Helps traders align entries with higher timeframe trends for increased accuracy.
Useful for scalpers looking to confirm trades with higher timeframe data.
9. Alerts and Notifications
The indicator includes real-time alerts via sound, pop-ups, or push notifications for buy/sell signals, break of structure, or key levels being hit.
Benefits:
Enables traders to stay informed even when away from their trading platform.
Reduces the chance of missing profitable opportunities.
10. Customization Options
The indicator allows extensive customization to suit different trading styles and preferences.
Features:
Adjustable signal sensitivity, color schemes, and risk parameters.
Compatibility with multiple platforms such as MT4, MT5, and TradingView.
Benefits:
Adapts to individual trading strategies, whether conservative or aggressive.
Ensures seamless integration into any trading setup.
Why the SMC Buy Sell Indicator is Essential for Traders
1. Time Efficiency: Automates complex analysis, saving traders time and effort.
2. Improved Accuracy: Combines multiple data points to provide reliable signals and risk management.
3. Versatility: Works across all markets, asset classes, and timeframes.
4. Risk Control: Ensures consistent risk management, protecting capital and reducing emotional trading.
5. Profit Optimization: Offers structured profit-taking and trailing stop-loss features for maximizing returns.
In summary, the SMC Buy Sell Indicator is more than just a signal generator. It is a complete trading ecosystem that empowers traders to make informed, confident, and profitable decisions in any market condition.
Zero Lag Trend Indicator - KetbotAI
Features of the Indicator:
Dynamic Trend Lines:
Green Line: Signals a bullish trend, indicating upward momentum in the market.
Red Line: Signals a bearish trend, indicating downward momentum in the market.
These lines dynamically adjust to market conditions, making it easy to identify trends at a glance.
Trend Signals:
"Trend Up" (Green): Marks the start of a bullish trend. Look for these signals as potential buying opportunities.
"Trend Down" (Red): Marks the start of a bearish trend. Look for these signals as potential selling opportunities.
Green Arrows: Highlight potential buy entry points.
Red Arrows: Highlight potential sell entry points.
Momentum Zones (Shaded Background):
Green Zones: Represent periods of bullish momentum, confirming the strength of an uptrend.
Red Zones: Represent periods of bearish momentum, confirming the strength of a downtrend.
These zones provide a clear visual cue for market sentiment.
How to Trade with This Indicator:
Identify Trend Direction:
Use the green and red trend lines to determine the market's direction:
A green line indicates a bullish trend and favors long (buy) positions.
A red line indicates a bearish trend and favors short (sell) positions.
Enter Trades at Reversal Points:
Enter a buy trade:
When the trend shifts from red to green.
Confirm with the "Trend Up" label or green arrow for additional confidence.
Enter a sell trade:
When the trend shifts from green to red.
Confirm with the "Trend Down" label or red arrow for additional confidence.
Use Shaded Zones for Confirmation:
Green Zones: Confirm that bullish momentum is dominating, supporting long trades.
Red Zones: Confirm that bearish momentum is dominating, supporting short trades.
Plan Your Exits:
For long trades, exit when the trend transitions back to red or when resistance levels are hit.
For short trades, exit when the trend transitions back to green or when support levels are hit.
Combine with Additional Indicators:
Pair this indicator with momentum tools like RSI, MACD, or volume analysis for enhanced signal confirmation.
Why Use This Indicator?
Simplicity:
Clean, easy-to-read signals help you make trading decisions with clarity and confidence.
Time-Saving:
Eliminates guesswork by highlighting trend direction and key entry/exit points.
Versatility:
Suitable for intraday, swing, or position traders who want a reliable trend-based tool.
Custom Alerts:
Set alerts for trend transitions (red to green or green to red) or when arrows appear, so you never miss a trade.
Suggestions for Optimization:
Adjust Sensitivity:
Fine-tune the settings to match your preferred trading style or market conditions.
Backtesting:
Test the indicator on historical data to build confidence in its accuracy and refine your strategy.
Multi-Timeframe Analysis:
Use the indicator across different timeframes (e.g., 1H, 4H) to align short-term entries with long-term trends.
This Gold Trend Indicator is your companion for identifying trends, capturing reversals, and making informed trading decisions. Whether you're a beginner or an experienced trader, its intuitive design and powerful signals will enhance your trading performance.
Signals & Overlays This script includes:
EMA Fast and Slow: Two exponential moving averages for trend detection.
ATR-based Bands: Dynamic support and resistance levels based on ATR.
Buy/Sell Signals: Generated when EMA Fast crosses over or under EMA Slow.
Overlays and Background: Visualization of trend with EMAs, bands, and a color-coded background.
Alerts: Configurable alerts for buy and sell signals.
Supertrend with Buy and Sell SignalsIndicator Features:
Buy and Sell Arrows:
Green Arrows (Buy):
These indicate potential buy signals when the price is in a bullish reversal zone.
Often appear after the price hits a support level or during an uptrend continuation.
Red Arrows (Sell):
These indicate potential sell signals when the price is in a bearish reversal zone.
Typically appear near resistance levels or during a trend reversal downward.
Dynamic Trendline Channels (Blue and Red):
These lines create a visual boundary for price movements, helping traders identify potential breakout or consolidation phases.
- Blue Line: Acts as support during an uptrend.
- Red Line: Acts as resistance during a downtrend.
Label Notifications:
Clear "Buy" or "Sell" labels reinforce the directional signals for quick decision-making.
These labels are designed to keep traders focused on actionable opportunities.
How to Trade with This Indicator:
Identify Trade Opportunities:
For Buy Trades:
Look for a green arrow and the "Buy" label near the blue support line.
Confirm the signal with bullish price action, such as higher highs or strong green candles.
For Sell Trades:
Look for a red arrow and the "Sell" label near the red resistance line.
Confirm the signal with bearish price action, such as lower lows or strong red candles.
Plan Entries and Exits:
Enter trades after confirmation of the arrow signal by observing the next few candles.
Use the blue line (support) for placing stop-loss orders below a buy trade.
Use the red line (resistance) for placing stop-loss orders above a sell trade.
Set take-profit targets based on nearby key price levels or dynamic trendlines.
Adapt to Market Conditions:
In trending markets: Follow the arrows and dynamic channels in the direction of the trend.
In range-bound markets: Focus on buy signals near the bottom of the range (blue lines) and sell signals near the top of the range (red lines).
Use with Multi-Timeframe Analysis:
- Combine this indicator with higher timeframes (e.g., 1H, 4H) to align trades with broader trends.
- Use lower timeframes for fine-tuning entries.
Trend Cloud with Signals buy and sell - KetbotAIThis indicator is designed to help traders identify key support and resistance levels, trends, and potential entry and exit points. Below is a breakdown of its features and how to use them effectively.
Features:
Dynamic Support and Resistance Lines:
The blue line acts as a dynamic support level where the price is likely to bounce upward.
The orange line serves as a dynamic resistance level where the price is likely to reverse downward.
These lines adjust based on market conditions, helping traders identify key price zones.
Directional Arrows:
- Red arrows indicate potential sell signals or bearish trend reversals, suggesting downward movement.
- Green arrows indicate potential buy signals or bullish trend reversals, suggesting upward movement.
These signals can be used for confirming trade entries.
Shaded Zones (Momentum Zones):
- The red zone highlights areas of bearish momentum, indicating selling pressure.
- The green zone highlights areas of bullish momentum, indicating buying pressure.
These zones provide a quick visual representation of market sentiment.
How to Trade with This Indicator:
Identify the Trend:
- Bullish Trend: If the price is above the orange line and within the green zone, it indicates strong upward momentum.
- Bearish Trend: If the price is below the blue line and within the red zone, it indicates strong downward momentum.
Enter Trades:
Buy Opportunities:
Look for green arrows near the blue line or within the green shaded zone.
Confirm the signal by observing bullish price action (e.g., higher highs or strong green candles).
Sell Opportunities:
Look for red arrows near the orange line or within the red shaded zone.
Confirm the signal by observing bearish price action (e.g., lower lows or strong red candles).
Set Stop-Loss and Take-Profit:
For buy trades:
Place your stop-loss just below the blue line or the recent swing low.
Set your take-profit near the orange line or at key resistance levels.
For sell trades:
Place your stop-loss just above the orange line or the recent swing high.
Set your take-profit near the blue line or at key support levels.
Combine with Multi-Timeframe Analysis:
Use this indicator alongside higher timeframes (e.g., 1H or 4H) to align your trades with the broader trend.
Pro Tips for Effective Use:
Use Alerts:
Set alerts for when the price touches the blue or orange lines or when the arrows appear, so you never miss a trade opportunity.
Validate with Other Indicators:
Pair this indicator with tools like RSI, MACD, or volume analysis to confirm breakouts or reversals.
Backtest and Optimize:
Test this indicator on historical data to refine your strategy and identify its strengths and weaknesses.
Adapt to Market Conditions:
For trending markets, follow the directional momentum.
For ranging markets, trade the bounces off the blue and orange lines.
This indicator is a powerful tool for traders looking to optimize their gold trading strategies. Its visual cues make it easy to spot trends and potential reversals. Let us know how it works for you or if you'd like to see additional features in future updates! 🚀
PowerStrike ProPowerStrike Pro is a powerful trading indicator designed to help traders identify high-probability buy and sell signals using a combination of ATR (Average True Range), RSI (Relative Strength Index), MACD, Supertrend, and weighted support/resistance levels. It is ideal for traders who want to combine multiple technical analysis tools into one comprehensive indicator.
Key Features
ATR Filtered Signals: Ensures signals are only generated during significant price movements.
Weighted Support/Resistance: Dynamically calculates support and resistance levels based on recent price action.
RSI Divergence Detection: Identifies bullish and bearish divergences for early trend reversal signals.
Supertrend Integration: Adds Supertrend buy/sell signals for additional confirmation.
MACD Strength: Incorporates MACD histogram strength to confirm momentum.
Customizable Parameters: Adjust all settings to fit your trading style and timeframe.
How to Use PowerStrike Pro
1. Adding the Indicator
Go to TradingView and open your chart.
Click on the "Indicators" button at the top of the chart.
Search for "PowerStrike Pro" and select it to add it to your chart.
2. Understanding the Signals
Buy Signal (Green Triangle): Appears below the price when the indicator detects a strong buying opportunity.
Sell Signal (Red Triangle): Appears above the price when the indicator detects a strong selling opportunity.
Supertrend Signals: Additional buy/sell signals are displayed as labels (▲ for buy, ▼ for sell).
Support/Resistance Lines: Blue and red dashed lines represent weighted support and resistance levels.
3. Customizing the Indicator
Open the Settings of the indicator by clicking on the gear icon.
Adjust the parameters to suit your trading strategy. For example:
RSI Period: Increase for smoother RSI values or decrease for more sensitivity.
ATR Multiplier: Adjust to filter out smaller price movements.
Support/Resistance Weight: Control how much weight is given to recent peaks and valleys.
4. Interpreting the Strength Labels
Buy Strength (%): Displays the strength of the buy signal as a percentage. Higher values indicate stronger signals.
Sell Strength (%): Displays the strength of the sell signal as a percentage. Higher values indicate stronger signals.
Use these labels to gauge the confidence level of each signal.
5. Combining with Other Tools
Use PowerStrike Pro in conjunction with other indicators like moving averages, volume analysis, or trendlines for additional confirmation.
For example, only take buy signals when the price is above a key moving average (e.g., 200 EMA).
Example Trading Strategy
Trend Confirmation: Ensure the higher timeframe trend is bullish (e.g., using a 50-period SMA on the 1-hour chart).
Signal Confirmation: Wait for a Buy Signal (green triangle) with a strength of at least 75%.
Entry: Enter the trade when the price breaks above the nearest resistance level (red dashed line).
Stop Loss: Place your stop loss below the nearest support level (blue dashed line).
Take Profit: Use a risk-reward ratio of 1:2 or trail your stop loss using the Supertrend indicator.
Tips for Success
Backtest: Test the indicator on historical data to understand its performance in different market conditions.
Risk Management: Always use proper risk management techniques, such as position sizing and stop-loss orders.
Avoid Overloading: While PowerStrike Pro combines multiple tools, avoid adding too many additional indicators to prevent analysis paralysis.
Community Feedback
We encourage you to share your experiences with PowerStrike Pro in the TradingView community. Let us know how you’ve customized it or combined it with other tools to improve your trading results!
Conclusion
PowerStrike Pro is a versatile and powerful indicator that simplifies technical analysis by combining multiple tools into one. Whether you’re a beginner or an experienced trader, it can help you identify high-probability trading opportunities with confidence. Happy trading!
mr.crypto731mr.crypto731 is the user name of My Instagram
it's Enhanced MACD Indicator is a powerful tool designed to provide traders with visual signals for potential market entry and exit points based on the Moving Average Convergence Divergence (MACD) strategy. This customized indicator adds clear and creative strong buy and sell signals within the MACD panel, making it easier to identify key trading opportunities.
Key Features:
MACD Calculation:
Fast Length: 12
Slow Length: 26
Signal Smoothing: 9
The indicator calculates the MACD line, signal line, and histogram using these parameters.
Strong Buy Signal:
Triggered when the MACD line (green) crosses above the signal line (red) and the histogram is positive (above zero).
This signal is marked by a lime-colored triangle pointing up with the text "🚀".
Strong Sell Signal:
Triggered when the signal line (red) crosses above the MACD line (green) and the histogram is negative (below zero).
This signal is marked by a red-colored triangle pointing down with the text "🔻".
Visual Enhancements:
Signal Labels: Creative labels with emojis to highlight the strength of the signals.
Background Color: Highlights the background in lime for strong buy signals and red for strong sell signals to make them stand out.
Integration:
Plots all signals within the MACD indicator panel for clear visualization and easy interpretation.
Usage:
Buy Signal: Look for a strong buy signal when the MACD line crosses above the signal line and the histogram is positive.
Sell Signal: Look for a strong sell signal when the signal line crosses above the MACD line and the histogram is negative.
This enhanced MACD indicator is ideal for traders looking for a straightforward and visually appealing tool to identify potential trading opportunities based on MACD crossovers. Its clear signals and creative styling make it a valuable addition to any trading strategy.
PrimeAlgoOverview
The PrimeAlgo Indicator is a versatile trading tool tailored for both short-term scalping and longer-term trend-following strategies. It is designed for multiple asset classes, including stocks, cryptocurrencies, and forex markets. By utilizing an enhanced Supertrend calculation, ATR-based volatility measures, VWAP bands, and support/resistance levels, PrimeAlgo delivers buy/sell signals, dynamic overbought/oversold zones, and trend reversal indications.
Its multi-layered approach combines mathematical precision with adaptive market analysis, enabling traders to filter market noise and identify high-probability trading opportunities.
Features
Buy and Sell Signals
PrimeAlgo generates entry and exit signals based on a modified Supertrend algorithm integrated with Keltner Channels. This combination aims to provide reliable trend-based signals.
Dynamic Overbought/Oversold Zones
Using VWAP (Volume Weighted Average Price) bands and adjusted ATR calculations, PrimeAlgo identifies potential price exhaustion zones, guiding traders in managing risk and recognizing reversal opportunities.
Reversal Signals
Integrated RSI and divergence analysis enable PrimeAlgo to highlight potential trend reversals. Signals are provided for both bullish and bearish reversals, enhancing its utility for counter-trend strategies.
Support and Resistance Detection
Automatically identifies critical support and resistance levels using pivot high/low analysis and adaptive zones, enabling traders to anticipate breakout or retracement scenarios.
Trend Tracking and Momentum Analysis
Incorporates exponential moving averages (EMAs) and dynamic trend direction detection to help traders align their strategies with prevailing market momentum.
Customizable Alerts
PrimeAlgo offers configurable alerts for buy/sell signals, reversal indications, and support/resistance interactions, ensuring traders remain informed without constant chart monitoring.
Get More Information About PrimeAlgo On Primealgo's Docs. - primealgo.gitbook.io
Calculations
1. Modified Supertrend with Keltner Channels
PrimeAlgo enhances the traditional Supertrend indicator by incorporating Keltner Channels:
Keltner Channels: Defined by a moving average (midline) and a range (difference between high and low prices). The upper and lower bands are calculated based on this range.
Supertrend Bands: The bands are dynamically adjusted using a sensitivity factor and ATR measures, ensuring adaptability to varying market conditions.
Trend Direction: A positive or negative direction is determined based on price interactions with these bands:
Close above the upper band indicates a bearish trend.
Close below the lower band indicates a bullish trend.
2. VWAP-Based Overbought/Oversold Zones
Dynamic bands are calculated using the VWAP and adjusted standard deviation:
Upper Band : VWAP plus a multiple of the standard deviation.
Lower Band: VWAP minus a multiple of the standard deviation.
These zones adapt to market conditions, signaling potential overextension or exhaustion.
3. Reversal Signal Detection
Reversal signals are based on RSI and divergence conditions:
RSI Levels : Overbought and oversold thresholds are defined by user settings (e.g., 75 and 25).
Divergence :
Bullish Divergence: Price falls while RSI rises.
Bearish Divergence: Price rises while RSI falls.
Signals are generated when RSI crosses these thresholds or divergence conditions are met.
4. Support and Resistance Levels
Support and resistance levels are calculated dynamically:
Pivot Points : Identified based on high/low price comparisons over a lookback period.
Strength: Levels are strengthened by repeated price interactions.
Zones : Wider regions around key levels account for market noise and volatility.
5. Trend Detection and EMA Energy
Trend Lines: Derived using ATR-modified trailing stops, with price crossovers indicating trend changes.
EMA Energy : Two EMAs (e.g., EMA 100 and EMA 200) provide additional trend confirmation, with price relative to these EMAs indicating bullish or bearish momentum.
Utility
The PrimeAlgo Indicator is suitable for a variety of trading styles, including scalping, swing trading, and longer-term strategies. It assists traders by:
Generating clear buy/sell signals to identify entry and exit points.
Highlighting potential reversal zones and dynamic support/resistance levels.
Providing visual and alert-based insights into market conditions and trends.
By combining advanced computational methods with intuitive visual tools, PrimeAlgo aims to enhance decision-making and trading performance. However, as with all technical indicators, it should be used alongside a comprehensive trading plan and risk management strategy.
{Scalping 20-30 pips for TFF Traders}I am not suggest use indicator.
Use indicator 20-30pips only.
SMC Reading strategy
Turtle Soup ICT Strategy [TradingFinder] FVG + CHoCH/CSD🔵 Introduction
The ICT Turtle Soup trading setup, designed in the ICT style, operates by hunting or sweeping liquidity zones to exploit false breakouts and failed breakouts in key liquidity Zones, such as recent highs, lows, or major support and resistance levels.
This setup identifies moments when the price breaches these liquidity zones, triggering stop orders placed (Stop Hunt) by other traders, and then quickly reverses direction. These movements are often associated with liquidity sweeps that create temporary market imbalances.
The reversal is typically confirmed by one of three structural shifts : a Market Structure Shift (MSS), a Change of Character (CHoCH), or a break of the Change in State of Delivery (CISD). Each of these structural shifts provides a reliable signal to interpret market intent and align trading decisions with the expected price movement. After the structural shift, the price frequently pullback to a Fair Value Gap (FVG), offering a precise entry point for trades.
By integrating key concepts such as liquidity, liquidity sweeps, stop order activation, structural shifts (MSS, CHoCH, CISD), and price imbalances, the ICT Turtle Soup setup enables traders to identify reversal points and key entry zones with high accuracy.
This strategy is highly versatile, making it applicable across markets such as forex, stocks, cryptocurrencies, and futures. It offers traders a robust and systematic approach to understanding price movements and optimizing their trading strategies
🟣 Bullish and Bearish Setups
Bullish Setup : The price first sweeps below a Sell-Side Liquidity (SSL) zone, then reverses upward after forming an MSS or CHoCH, and finally pulls back to an FVG, creating a buying opportunity.
Bearish Setup : The price first sweeps above a Buy-Side Liquidity (BSL) zone, then reverses downward after forming an MSS or CHoCH, and finally pulls back to an FVG, creating a selling opportunity.
🔵 How to Use
To effectively utilize the ICT Turtle Soup trading setup, begin by identifying key liquidity zones, such as recent highs, lows, or support and resistance levels, in higher timeframes.
Then, monitor lower timeframes for a Liquidity Sweep and confirmation of a Market Structure Shift (MSS) or Change of Character (CHoCH).
After the structural shift, the price typically pulls back to an FVG, offering an optimal trade entry point. Below, the bullish and bearish setups are explained in detail.
🟣 Bullish Turtle Soup Setup
Identify Sell-Side Liquidity (SSL) : In a higher timeframe (e.g., 1-hour or 4-hour), identify recent price lows or support levels that serve as SSL zones, typically the location of stop-loss orders for traders.
Observe a Liquidity Sweep : On a lower timeframe (e.g., 15-minute or 30-minute), the price must move below one of these liquidity zones and then reverse. This movement indicates a liquidity sweep.
Confirm Market Structure Shift : After the price reversal, look for a structural shift (MSS or CHoCH) indicated by the formation of a Higher Low (HL) and Higher High (HH).
Enter the Trade : Once the structural shift is confirmed, the price typically pulls back to an FVG. Enter a buy trade in this zone, set a stop-loss slightly below the recent low, and target Buy-Side Liquidity (BSL) in the higher timeframe for profit.
🟣 Bearish Turtle Soup Setup
Identify Buy-Side Liquidity (BSL) : In a higher timeframe, identify recent price highs or resistance levels that serve as BSL zones, typically the location of stop-loss orders for traders.
Observe a Liquidity Sweep : On a lower timeframe, the price must move above one of these liquidity zones and then reverse. This movement indicates a liquidity sweep.
Confirm Market Structure Shift : After the price reversal, look for a structural shift (MSS or CHoCH) indicated by the formation of a Lower High (LH) and Lower Low (LL).
Enter the Trade : Once the structural shift is confirmed, the price typically pulls back to an FVG. Enter a sell trade in this zone, set a stop-loss slightly above the recent high, and target Sell-Side Liquidity (SSL) in the higher timeframe for profit.
🔵 Settings
Higher TimeFrame Levels : This setting allows you to specify the higher timeframe (e.g., 1-hour, 4-hour, or daily) for identifying key liquidity zones.
Swing period : You can set the swing detection period.
Max Swing Back Method : It is in two modes "All" and "Custom". If it is in "All" mode, it will check all swings, and if it is in "Custom" mode, it will check the swings to the extent you determine.
Max Swing Back : You can set the number of swings that will go back for checking.
FVG Length : Default is 120 Bar.
MSS Length : Default is 80 Bar.
FVG Filter : This refines the number of identified FVG areas based on a specified algorithm to focus on higher quality signals and reduce noise.
Types of FVG filter s:
Very Aggressive Filter: Adds a condition where, for an upward FVG, the last candle's highest price must exceed the middle candle's highest price, and for a downward FVG, the last candle's lowest price must be lower than the middle candle's lowest price. This minimally filters out FVGs.
Aggressive Filter: Builds on the Very Aggressive mode by ensuring the middle candle is not too small, filtering out more FVGs.
Defensive Filter: Adds criteria regarding the size and structure of the middle candle, requiring it to have a substantial body and specific polarity conditions, filtering out a significant number of FVGs.
Very Defensive Filter: Further refines filtering by ensuring the first and third candles are not small-bodied doji candles, retaining only the highest quality signals.
In the indicator settings, you can customize the visibility of various elements, including MSS, FVG, and HTF Levels. Additionally, the color of each element can be adjusted to match your preferences. This feature allows traders to tailor the chart display to their specific needs, enhancing focus on the key data relevant to their strategy.
🔵 Conclusion
The ICT Turtle Soup trading setup is a powerful tool in the ICT style, enabling traders to exploit false breakouts in key liquidity zones. By combining concepts of liquidity, liquidity sweeps, market structure shifts (MSS and CHoCH), and pullbacks to FVG, this setup helps traders identify precise reversal points and execute trades with reduced risk and increased accuracy.
With applications across various markets, including forex, stocks, crypto, and futures, and its customizable indicator settings, the ICT Turtle Soup setup is ideal for both beginner and advanced traders. By accurately identifying liquidity zones in higher timeframes and confirming structure shifts in lower timeframes, this setup provides a reliable strategy for navigating volatile market conditions.
Ultimately, success with this setup requires consistent practice, precise market analysis, and proper risk management, empowering traders to make smarter decisions and achieve their trading goals.
MACD Buy/Sell Labels + Barcolor👉 MACD Buy/Sell Labels + Barcolor
This advanced indicator combines the functionality of the MACD (Moving Average Convergence Divergence) with intuitive and customizable visual features, making it ideal for traders looking for an efficient tool to confirm buy and sell signals across any market.
It is based on the logical interpretation of a modified oscillator to improve its performance and simplify its usage. The indicator integrates seamlessly into the chart, offering an intuitive and easy-to-understand experience.
📍 Labels (Buy/Sell):
The signals are generated automatically by crossovers between the Fast EMA and Slow EMA of the Gaussian MACD. It comes with a default configuration designed to favor clean crossovers while avoiding false signals.
🧪 Barcolor:
The color of the candles dynamically changes according to the range of the Gaussian MACD histogram. This allows for a clear visualization of the MACD's status without needing to display the full oscillator. This feature integrates with the labels, as explained in the "Interpretation" section, to significantly increase their probability of success. Both the ranges and colors are fully customizable through the settings panel.
⚙️ Settings:
All aspects of the indicator can be customized:
1-MACD: Like a standard MACD, you can adjust the EMA lengths and the signal smoothing to adapt it to your trading style and the markets you trade.
2-Barcolor: The predefined values highlight extreme levels for proper interpretation, as explained in the "Interpretation" section. However, intermediate levels are also included in case you want to implement them in your strategy. You can adjust these values based on what you consider "overbought" or "oversold." This flexibility allows adaptation to various assets, as oscillator behavior varies across different instruments.
3-Buy/Sell Filter:
The filter settings allow you to further refine the signals. The default values of -70 (Buy Filter) and 80 (Sell Filter) work best for me, but you can adjust them as you see fit. Keep in mind:
-Higher distance from zero: More filtered signals (fewer, but higher quality).
-Closer to zero: Less filtered signals (more frequent, but with increased risk of false signals).
🤔 Interpretation:
As mentioned earlier, this follows the classic interpretation of a MACD oscillator: overbought/oversold levels combined with crossovers. However, the barcolor variable is what makes this indicator truly unique.
With barcolor, you can detect potential divergences and confirm them using the labels. When the oscillator reaches an extreme zone, barcolor provides a visual alert. Once the oscillator exits this zone, the candles revert to their normal color. This signals that the oscillator is dropping. If the price continues rising, this divergence can indicate an anomaly in the market. Waiting for confirmation from the label increases the probability of successful trades while detecting unusual market deviations without even looking at the oscillator.
Purpose:
This indicator is designed to help traders simplify the interpretation of the MACD. It can be used on any timeframe, but it was primarily tested using technical analysis concepts and basic liquidity principles. Its effectiveness improves significantly if you understand broader market dynamics.
Disclaimer:
This is purely an analytical tool and should NOT be considered as trading signals. Perform your own research and make decisions based solely on your responsibility. Thank you!
Up and Downwhat is "Up and Down"?
It is an indicator designed to show you in detail on the chart and warn you when there is an increase or decrease in the market at a level that you consider important.
what it does?
When the price difference between a top and bottom is greater than the level you selected (the default input is 10 percent), it indicates this along with the percentage value on the chart. Then, it indicates the start and end points with lines so that you can see the change from where to where. It shows the price's current percentage distance from the last bottom or top in the upper right corner.
it also colors the candles so you can better understand how fast the price is moving. The greener the candles, the stronger the rise, and conversely, the greater the decline, the redder the candles. Of course, if you set an alarm, it will tell you in which trading pair, in which time period, at what percentage and in which direction there is a movement.
how it does it?
It uses a moving average with a short length to find bottoms and tops. It then measures the distance from the last peak to the bottom and expresses it as a percentage. It uses momentum using the moving average as a source to paint the candles. To compress this momentum between the values 255 and 0, I used a formula that I also used in my limited fisher transform work (because the inputs in the color.rgb function take values between 0 and 255). It was a bit challenging to use the lines correctly, but with the "ta.valuewhen" function and a little experimenting, they were I made sure they were drawn correctly.
how to use it?
It is quite simple to use. First, select the minimum interval you want to receive alarms. If you make this value too high, you will not receive any alarms; if you make it too low, you will receive too many alarms. Choose the range that will benefit you most for the trading pair you are using. Then all you have to do is set an alarm. When you set an alarm, leave the note section blank and the indicator will send you the necessary information.
Dynamic RSI with Overbought/Oversold LinesDynamic RSI with Overbought/Oversold Lines
This indicator enhances the traditional RSI (Relative Strength Index) by dynamically adjusting the overbought and oversold levels based on the highest and lowest RSI values over a user-defined period. The indicator plots these levels as horizontal lines, allowing traders to visually identify when the market is "overbought" or "oversold."
Features:
Dynamic Overbought/Oversold Levels: Automatically adjusts the overbought and oversold levels based on the highest and lowest RSI values within the defined period, ensuring more accurate signals tailored to the current market conditions.
Customizable RSI Period: Choose your preferred RSI period to suit your trading strategy.
Signal Alerts: Visual signals are displayed when the RSI crosses into the overbought or oversold zone, indicating potential reversal points.
Background Color Alerts: The background changes color when the RSI exceeds overbought or oversold levels, making it easier to spot these important zones at a glance.
Clean and Simple: A minimalist design focusing on the key elements, making it suitable for all traders.
How to Use:
Overbought Zone: When the RSI moves above the overbought line (red), it may indicate that the asset is overbought, signaling a potential price reversal or pullback.
Oversold Zone: When the RSI moves below the oversold line (green), it may indicate that the asset is oversold, signaling a potential price bounce or reversal.
This dynamic RSI indicator is perfect for those looking to capture market extremes and improve their trading decisions. It's especially useful for timeframes like 30-minute and 1-hour charts, where market conditions tend to shift more rapidly.
Samih Signal AV V2The Samih Signal VA indicator is built for traders who prioritize technical analysis to determine market entry and exit points. It combines signals based on volume, moving averages, the Volume Weighted Average Price (VWAP), and identifies specific candlestick patterns, such as the Pin Bar and Inside Bar. This indicator assists in spotting optimal moments to buy or sell by analyzing trends, volume activity, and nearby liquidity zones.
Parameters and Features:
Simple Moving Average (MA) and VWAP:
Samih Signal VA uses a 50-period simple moving average for trend identification, paired with VWAP to refine price analysis with volume-weighted data.
Together, these components reveal whether the market is trending upward or downward, strengthening the reliability of entry and exit signals.
Volume Threshold:
A volume filter is applied by calculating a 20-period moving average, then setting a threshold at 1.2 times this average volume. This filter helps prevent false signals, focusing only on periods of increased market interest.
Candlestick Pattern Recognition:
Pin Bar: Detects this popular reversal/continuation pattern in both bullish and bearish scenarios, indicating potential entry or exit points.
Inside Bar: Identifies this pattern, which represents a moment of price compression and indecision, often preceding a breakout.
Trend Identification:
The indicator defines an uptrend when the price remains above both the MA and VWAP. A downtrend is confirmed when the price stays below these indicators.
Liquidity Zone Detection:
Samih Signal VA includes a feature to approximate liquidity zones, identifying recent support and resistance levels. Recognizing when prices approach these areas enhances the accuracy of buy or sell signals.
Buy and Sell Signal Logic:
Buy Signal: Triggered when a bullish Pin Bar or Inside Bar appears in an uptrend with high volume and proximity to a liquidity zone.
Sell Signal: Generated when a bearish Pin Bar or Inside Bar is detected in a downtrend with high volume, near a liquidity zone.
Signal Display on the Chart:
The indicator marks buy signals with a green “BUY” label below the bar, and sell signals with a red “SELL” label above the bar, directly on the chart for immediate clarity.
Summary:
The Samih Signal VA is suited for traders focused on precise entries and exits, integrating trend analysis, volume metrics, and candlestick patterns. By identifying liquidity zones, this indicator reduces the likelihood of false signals and provides clear buy and sell alerts.
This description can be easily added to TradingView to help users understand the features and decision-making logic of the Samih Signal VA indicator. Let me know if you’d like any additional adjustments!
Enhanced Pressure MTF ScreenerEnhanced Pressure Multi-Timeframe (MTF) Screener Indicator
Overview
The Enhanced Pressure MTF Screener is an add-on that extends the capabilities of the Enhanced Buy/Sell Pressure, Volume, and Trend Bar Analysis . It provides a clear and consolidated view of buy/sell pressure across multiple timeframes. This indicator allows traders to determine when different timeframes are synchronized in the same trend direction, which is particularly useful for making high-confidence trading decisions.
Image below: is the Enhanced Buy/Sell Pressure, Volume, and Trend Bar Analysis with the Enhanced Pressure MTF Screener indicator both active together.
Key Features
1.Multi-Timeframe Analysis
The indicator screens various predefined timeframes (from 1 week down to 10 minutes).
It offers a table view that shows buy or sell ratings for each timeframe, making it easy to see which timeframes are aligned.
Traders can choose which timeframes to include based on their trading strategies (e.g., higher timeframes for position trading, lower timeframes for scalping).
2.Pressure and Trend Calculation
Uses Buy and Sell Pressure calculations from the Enhanced Buy/Sell Pressure indicator to determine whether buying or selling is dominant in each timeframe.
By analyzing pressures on multiple timeframes, the indicator gives a comprehensive perspective of the current market sentiment.
The indicator calculates whether a move is strong based on user-defined thresholds, which are displayed in the form of additional signals.
3.Heikin Ashi Option
The Heikin Ashi candle type can be toggled on or off. Using Heikin Ashi helps smooth out market noise and provides a clearer indication of trend direction.
This is particularly helpful for traders who want to filter out market noise and focus on the primary trend.
4.Table Customization
Table Positioning: The table showing timeframe data can be positioned at different locations on the chart—top, middle, or bottom.
Text and Alignment: The alignment and text size of the table can be customized for better visual clarity.
Color Settings: Users can choose specific colors to indicate buying and selling pressure across timeframes, making it easy to interpret.
5.Strong Movement Indicators
The screener provides an additional visual cue (🔥) for timeframes where the movement is deemed strong, based on a user-defined threshold.
This helps highlight timeframes where significant buying or selling pressure is present, which could signal potential trading opportunities.
How the Screener Works
1.Pressure Calculation
For each selected timeframe, the indicator retrieves the Open, High, Low, and Close (OHLC) values.
It calculates buy pressure (the range between high and low when the closing price is higher than the opening) and sell pressure (the range between high and low when the closing price is equal to or lower than the opening).
The screener computes the pressure ratio, which represents the difference between buying and selling pressure, to determine which side is dominant.
2.Trend Rating and Signal Generation
Based on the calculated pressure, the screener determines a trend rating for each timeframe: "Buy," "Sell," or "Neutral." (▲ ,▼ or •)
Additionally, it generates a signal (▲ or ▼) to indicate the current trend direction and whether the move is strong (based on the user-defined threshold).
If the movement is strong, a fire icon (🔥) is added to indicate that there is significant pressure on that timeframe, signaling a higher confidence in the trend.
3.Customizable Strong Move Thresholds
Strong Move Threshold: The screener uses this value to decide whether a trend is significantly strong. A higher value makes it more selective in determining strong moves.
Strong Movement Threshold: Helps determine when an additional strong signal should be displayed, offering further insight into the strength of market movement.
Inputs and Customization
The Enhanced Pressure MTF Screener is highly customizable to fit the needs of individual traders:
General Settings:
Use Heikin Ashi: Toggle this setting to use Heikin Ashi for a smoother trend representation.
Strong Move Threshold: Defines how strong a move should be to be considered significant.
Strong Movement Threshold: Specifies the level of pressure required to highlight a move with the fire icon.
Table Settings:
Position: Choose the vertical position of the screener table (top, middle, or bottom of the chart).
Alignment: Align the table (left, center, or right) to best suit your chart layout.
Text Size: Adjust the text size in the table for better readability.
Table Color Settings:
Users can set different colors to represent buying and selling signals for better visual clarity, particularly when scanning multiple timeframes.
Timeframe Settings:
The screener provides options to include up to ten different timeframes. Traders can select and customize each timeframe to match their strategy.
Examples of available timeframes include 1 Week, 1 Day, 12 Hours, down to 10 Minutes, allowing for both broad and detailed analysis.
Practical Use Case
Identifying Trend Alignment Across Timeframes:
Imagine you are about to take a long trade but want to make sure that the trend direction is aligned across multiple timeframes.
The screener displays "Buy" ratings across the 4H, 1H, 30M, and 10M timeframes, while higher timeframes (like 1W and 1D) also show "Buy" with strong signals (🔥). This indicates that buying pressure is strong across the board, adding confidence to your trade.
Spotting Reversal Opportunities:
If a downtrend is evident across most timeframes but suddenly a higher timeframe, such as 12H, changes to "Buy" while showing a strong move (🔥), this could indicate a potential reversal.
The screener allows you to spot these discrepancies and consider taking early action.
Benefits for Traders
1.Synchronization Across Timeframes:
One of the main strengths of this screener is its ability to show synchronized buy/sell signals across different timeframes. This makes it easy to confirm the strength and consistency of a trend.
For example, if you see that all the selected timeframes display "Buy," this implies that both short-term and long-term traders are favoring the upside, giving additional confidence to go long.
2.Quick and Visual Trend Overview:
The table offers an at-a-glance summary, reducing the time required to manually inspect each timeframe.
This makes it particularly useful for traders who want to make quick decisions, such as day traders or scalpers.
3.Strong Move Indicator:
The use of fire icons (🔥) provides an easy way to identify significant movements. This is particularly helpful for traders looking for breakouts or strong market conditions that could lead to high probability trades.
To put it short or to summarize
The Enhanced Pressure MTF Screener is a powerful add-on for traders looking to understand how buy and sell pressure aligns across multiple timeframes. It offers:
A clear summary of buying or selling pressure across different timeframes.
Heikin Ashi smoothing, providing an option to reduce market noise.
Strong movement signals to highlight significant trading opportunities.
Customizable settings to fit any trading strategy or style.
The screener and the main indicator are best used together, as the screener provides the multi-timeframe overview, while the main indicator provides an in-depth look at each individual bar and trend.
I hope my indicator helps with your trading, if you guys have any ideas or questions there is the comment section :D
Stoch RSI and RSI Buy/Sell Signals with MACD Trend FilterDescription of the Indicator
This Pine Script is designed to provide traders with buy and sell signals based on the combination of Stochastic RSI, RSI, and MACD indicators, enhanced by the confirmation of candle colors. The primary goal is to facilitate informed trading decisions in various market conditions by utilizing different indicators and their interactions. The script allows customization of various parameters, providing flexibility for traders to adapt it to their specific trading styles.
Usefulness
This indicator is not just a mashup of existing indicators; it integrates the functionality of multiple momentum and trend-detection methods into a cohesive trading tool. The combination of Stochastic RSI, RSI, and MACD offers a well-rounded approach to analyzing market conditions, allowing traders to identify entry and exit points effectively. The inclusion of color-coded signals (strong vs. weak) further enhances its utility by providing visual cues about the strength of the signals.
How to Use This Indicator
Input Settings: Adjust the parameters for the Stochastic RSI, RSI, and MACD to fit your trading style. Set the overbought/oversold levels according to your risk tolerance.
Signal Colors:
Strong Buy Signal: Indicated by a green label and confirmed by a green candle (close > open).
Weak Buy Signal: Indicated by a blue label and confirmed by a green candle (close > open).
Strong Sell Signal: Indicated by a red label and confirmed by a red candle (close < open).
Weak Sell Signal: Indicated by an orange label and confirmed by a red candle (close < open).
Example Trading Strategy Using This Indicator
To effectively use this indicator as part of your trading strategy, follow these detailed steps:
Setup:
Timeframe : Select a timeframe that aligns with your trading style (e.g., 15-minute for intraday, 1-hour for swing trading, or daily for longer-term positions).
Indicator Settings : Customize the Stochastic RSI, RSI, and MACD parameters to suit your trading approach. Adjust overbought/oversold levels to match your risk tolerance.
Strategy:
1. Strong Buy Entry Criteria :
Wait for a strong buy signal (green label) when the RSI is at or below the oversold level (e.g., ≤ 35), indicating a deeply oversold market. Confirm that the MACD shows a decreasing trend (bearish momentum weakening) to validate a potential reversal. Ensure the current candle is green (close > open) if candle color confirmation is enabled.
Example Use : On a 1-hour chart, if the RSI drops below 35, MACD shows three consecutive bars of decreasing negative momentum, and a green candle forms, enter a buy position. This setup signals a robust entry with strong momentum backing it.
2. Weak Buy Entry Criteria :
Monitor for weak buy signals (blue label) when RSI is above the oversold level but still below the neutral (e.g., between 36 and 50). This indicates a market recovering from an oversold state but not fully reversing yet. These signals can be used for early entries with additional confirmations, such as support levels or higher timeframe trends.
Example Use : On the same 1-hour chart, if RSI is at 45, the MACD shows momentum stabilizing (not necessarily negative), and a green candle appears, consider a partial or cautious entry. Use this as an early warning for a potential bullish move, especially when higher timeframe indicators align.
3. Strong Sell Entry Criteria :
Look for a strong sell signal (red label) when RSI is at or above the overbought level (e.g., ≥ 65), signaling a strong overbought condition. The MACD should show three consecutive bars of increasing positive momentum to indicate that the bullish trend is weakening. Ensure the current candle is red (close < open) if candle color confirmation is enabled.
Example Use : If RSI reaches 70, MACD shows increasing momentum that starts to level off, and a red candle forms on a 1-hour chart, initiate a short position with a stop loss set above recent resistance. This is a high-confidence signal for potential price reversal or pullback.
4. Weak Sell Entry Criteria :
Use weak sell signals (orange label) when RSI is between the neutral and overbought levels (e.g., between 50 and 64). These can indicate potential short opportunities that might not yet be fully mature but are worth monitoring. Look for other confirmations like resistance levels or trendline touches to strengthen the signal.
Example Use : If RSI reads 60 on a 1-hour chart, and the MACD shows slight positive momentum with signs of slowing down, place a cautious sell position or scale out of existing long positions. This setup allows you to prepare for a possible downtrend.
Trade Management:
Stop Loss : For buy trades, place stop losses below recent swing lows. For sell trades, set stops above recent swing highs to manage risk effectively.
Take Profit : Target nearby resistance or support levels, apply risk-to-reward ratios (e.g., 1:2), or use trailing stops to lock in profits as price moves in your favor.
Confirmation : Align these signals with broader trends on higher timeframes. For example, if you receive a weak buy signal on a 15-minute chart, check the 1-hour or daily chart to ensure the overall trend is not bearish.
Real-World Example: Imagine trading on a 15-minute chart :
For a buy:
A strong buy signal (green) appears when the RSI dips to 32, MACD shows declining bearish momentum, and a green candle forms. Enter a buy position with a stop loss below the most recent support level.
Alternatively, a weak buy signal (blue) appears when RSI is at 47. Use this as a signal to start monitoring the market closely or enter a smaller position if other indicators (like support and volume analysis) align.
For a sell:
A strong sell signal (red) with RSI at 72 and a red candle signals to short with conviction. Place your stop loss just above the last peak.
A weak sell signal (orange) with RSI at 62 might prompt caution but can still be acted on if confirmed by declining volume or touching a resistance level.
These strategies show how to blend both strong and weak signals into your trading for more nuanced decision-making.
Technical Analysis of the Code
1. Stochastic RSI Calculation:
The script calculates the Stochastic RSI (stochRsiK) using the RSI as input and smooths it with a moving average (stochRsiD).
Code Explanation : ta.stoch(rsi, rsi, rsi, stochLength) computes the Stochastic RSI, and ta.sma(stochRsiK, stochSmoothing) applies smoothing.
2. RSI Calculation :
The RSI is computed over a user-defined period and checks for overbought or oversold conditions.
Code Explanation : rsi = ta.rsi(close, rsiLength) calculates RSI values.
3. MACD Trend Filter :
MACD is calculated with fast, slow, and signal lengths, identifying trends via three consecutive bars moving in the same direction.
Code Explanation : = ta.macd(close, macdLengthFast, macdLengthSlow, macdSignalLength) sets MACD values. Conditions like macdLine < macdLine confirm trends.
4. Buy and Sell Conditions :
The script checks Stochastic RSI, RSI, and MACD values to set buy/sell flags. Candle color filters further confirm valid entries.
Code Explanation : buyConditionMet and sellConditionMet logically check all conditions and toggles (enableStochCondition, enableRSICondition, etc.).
5. Signal Flags and Confirmation :
Flags track when conditions are met and ensure signals only appear on appropriate candle colors.
Code Explanation : Conditional blocks (if statements) update buyFlag and sellFlag.
6. Labels and Alerts :
The indicator plots "BUY" or "SELL" labels with the RSI value when signals trigger and sets alerts through alertcondition().
Code Explanation : label.new() displays the signal, color-coded for strength based on RSI.
NOTE : All strategies can be enabled or disabled in the settings, allowing traders to customize the indicator to their preferences and trading styles.
Weekly RSI Buy/Sell SignalsWeekly RSI Buy/Sell Signal Indicator
This indicator is designed to help traders identify high-probability buy and sell opportunities on the weekly chart by using the Relative Strength Index (RSI). By utilizing weekly RSI values, this indicator ensures signals align with broader market trends, providing a clearer view of potential price reversals and continuation.
How It Works:
Weekly RSI Calculation: This script calculates the RSI using a 14-period setting, focusing on the weekly timeframe regardless of the user’s current chart view. The weekly RSI is derived using request.security, allowing for consistent signals even on intraday charts.
Signal Conditions:
Buy Signal: A buy signal appears when the RSI crosses above the oversold threshold of 30, suggesting that price may be gaining momentum after a potential bottom.
Sell Signal: A sell signal triggers when the RSI crosses below the overbought threshold of 70, indicating a possible momentum shift downwards.
Visual Cues:
Buy/Sell Markers: Clear green "BUY" and red "SELL" markers are displayed on the chart when buy or sell conditions are met, making it easy to identify entry and exit points.
RSI Line and Thresholds: The weekly RSI value is plotted in real time with color-coded horizontal lines at 30 (oversold) and 70 (overbought), providing a visual reference for key levels.
This indicator is ideal for traders looking for reliable, trend-based signals on higher timeframes and can be a helpful tool for filtering out shorter-term market noise.
Hermes Reg FIBONACCI V.4Hermes Reg Fibonacci V.4 Indicator User Guide
Overview
The Hermes Reg Fibonacci V.4 indicator is a versatile tool used for identifying market trends and channels. This indicator analyzes price movements using logarithmic regression and Fibonacci levels, helping users determine the direction of the trend and identify support/resistance levels.
Parameters and Inputs
Source: The price data to be used in the calculations of the indicator. The default is the close price.
Length: The period length for the calculations of the indicator. The default is 262 and the minimum value is 10.
Deviation Multiplier (devlen): Set to 1.6.
Extend Lines: Determines whether the lines should be extended to the right of the chart.
Show Fibonacci Levels: Determines whether Fibonacci levels should be displayed.
Show Broken Channel: Determines whether to display the broken channel lines.
Up Trend Color (upcol): The color of the uptrend line.
Down Trend Color (dncol): The color of the downtrend line.
Fibonacci Up Trend Color (fibupcol): The color of the Fibonacci uptrend line.
Fibonacci Down Trend Color (fibdncol): The color of the Fibonacci downtrend line.
Channel Line Width (widt): The width of the channel line.
Fibonacci Line Width (fibwidt): The width of the Fibonacci line.
Working Mechanism of the Indicator
Logarithmic Source and Regression Channel Calculations:
The indicator takes the logarithm of the price data and calculates the logarithmic regression channel.
It calculates the middle line of the channel, slope, and the starting and ending points.
The standard deviation and the upper/lower boundaries of the channel are determined.
Channel and Fibonacci Levels:
Depending on user preferences, channel lines and Fibonacci levels are drawn on the chart.
Channel lines and Fibonacci levels are dynamically updated based on the slope and price movement.
When the channel is broken, it is displayed with the specified color and style.
Trend Direction and Alert Conditions:
The direction of the trend is determined based on whether the slope is positive or negative.
Alert conditions are defined for trend changes and channel breaks.
Symbols indicating the trend direction are displayed on the chart.
Usage Recommendations
Trend Following: The Hermes Reg Fibonacci V.4 indicator can be used to determine the current trend direction and identify potential trend reversal points.
Support and Resistance Levels: The indicator helps identify support and resistance levels by observing how the price moves within the channel.
Fibonacci Analysis: Fibonacci levels can be used to identify potential retracement and extension points.
Alerts and Notifications: Set alerts for trend changes and channel breaks to avoid missing important price movements.
The Hermes Reg Fibonacci V.4 indicator, with its user-friendly interface and flexible parameters, can be effectively used in different market conditions. By customizing the indicator, you can tailor it to suit your trading strategy.
Memecoin TrackerMemecoin Z-Score Tracker with Buy/Sell Table - Technical Explanation
How it Works:
This indicator calculates the Z-scores of various memecoins based on their price movements, using historical funding rates across multiple exchanges. A Z-score measures the deviation of the current price from its moving average, expressed in standard deviations. This provides insight into whether a coin is overbought (positive Z-score) or oversold (negative Z-score) relative to its recent history.
Key Components:
- Z-Score Calculation
- The lookback period is dynamically adjusted based on the chart’s timeframe to ensure consistency across different time intervals:
- For lower timeframes (e.g., minutes), the base lookback period is scaled to match approximately 240 minutes.
- For daily and higher timeframes, the base lookback period is fixed (e.g., 14 bars).
Memecoin Selection:
The indicator tracks several popular memecoins, including DOGE, SHIB, PEPE, FLOKI, and others.
Funding rates are fetched from exchanges like Binance, Bybit, and MEXC using the request.security() function, ensuring accurate real-time price data.
Thresholds for Buy/Sell Signals:
Users can set custom Z-score thresholds for buy (oversold) and sell (overbought) signals:
Default upper threshold: 2.5 (indicates overbought condition).
Default lower threshold: -2.5 (indicates oversold condition).
When a memecoin’s Z-score crosses above or below these thresholds, it signals potential buy or sell conditions.
Buy/Sell Table:
A table with two columns (BUY and SELL) is dynamically populated with memecoins that are currently oversold (buy signal) or overbought (sell signal).
Each column can hold up to 20 entries, providing a clear overview of current market opportunities.
Visual Feedback:
The Z-scores of each memecoin are plotted as a line on the chart, with color-coded feedback:
Red for overbought (Z-score > upper threshold),
Green for oversold (Z-score < lower threshold),
Other colors indicate neutral conditions.
Horizontal lines representing the upper and lower thresholds are plotted for reference.
How to Use It:
Adjust Thresholds:
You can modify the upper and lower Z-score thresholds in the settings to customize sensitivity. Lower thresholds will increase the likelihood of triggering buy/sell signals for smaller price deviations, while higher thresholds will focus on more extreme conditions.
View Real-Time Signals:
The table shows which memecoins are currently oversold (buy column) or overbought (sell column), updating dynamically as price data changes. Traders can monitor this table to identify trading opportunities quickly.
Use with Different Timeframes:
The Z-score lookback period adjusts automatically based on the chart's timeframe, making this indicator suitable for intraday and long-term traders.
Use shorter timeframes (e.g., 1-minute, 5-minute charts) for faster signals, while longer timeframes (e.g., daily, weekly) may yield more stable, trend-based signals.
Who It Is For:
Short-Term Traders: Those looking to capitalize on short-term price imbalances (e.g., day traders, scalpers) can use this indicator to identify quick buy/sell opportunities as memecoins oscillate around their moving averages.
Swing Traders: Swing traders can use the Z-score tracker to identify overbought or oversold conditions across multiple memecoins and ride the reversals back toward equilibrium.
Crypto Enthusiasts and Memecoin Investors: Anyone involved in the volatile memecoin market can use this tool to better time entries and exits based on market extremes.
This indicator is for traders seeking quantitative analysis of price extremes in memecoins. By tracking the Z-scores across multiple coins and dynamically updating buy/sell opportunities in a table, it provides a systematic approach to identifying trade setups.
Cumulative Volume Delta Strategy | Flux Charts💎 GENERAL OVERVIEW
Introducing the Cumulative Volume Delta Strategy (CVDS) Indicator, an advanced tool designed to enhance trading strategies by identifying potential trend reversals through volume dynamics. This script features integrated order block detection, Fair Value Gaps (FVGs), and a dynamic take-profit (TP) and stop-loss (SL) system. For an in-depth understanding of the strategy, refer to the "HOW DOES IT WORK?" section below.
Features of the new Cumulative Volume Delta Strategy (CVDS) Indicator :
Cumulative Volume Delta-based Strategy
Order Block and Fair Value Gap (FVG) Entry Methods
Dynamic TP/SL System
Customizable Risk Management Settings
Alerts for Buy, Sell, TP, and SL Signals
📌 HOW DOES IT WORK ?
The CVDS indicator operates by tracking the net volume difference between buyers and sellers to identify divergences that could indicate potential trend reversals. A cumulative volume delta (CVD) calculation is employed to measure the intensity of these divergences in relation to price movements. The net volume sum is reset every trading day (can be changed from the settings using the anchor period option), and divergences are detected when the cumulative volume crosses the 0-line over or under.
Once a significant divergence is detected, the indicator identifies breakout points, confirmed by either Fair Value Gaps (FVGs) or Order Blocks (OBs). Depending on your chosen entry mode, the indicator will trigger a buy or sell entry when the confirmation signal aligns with the breakout direction. Alerts for Buy, Sell, Take-Profit, and Stop-Loss are available.
Note that the indicator cannot run on 1-minute and 1-second charts, as it needs to get data from a lower timeframe. 1-minutes & 1-second timeframes are the minimum timeframes in their ranges respectively.
🚩 UNIQUENESS
What sets this indicator apart is the combination of volume divergence analysis with advanced price action tools like Fair Value Gaps (FVGs) and Order Blocks (OBs). The ability to choose between these methods, along with a dynamic TP/SL system that adapts based on volatility, provides flexibility for traders in any market condition. The backtesting dashboard provides metrics about the performance of the indicator. You can use it to tune the settings for best use in the current ticker. The CVD-based strategy ensures that trades are initiated only when meaningful divergences between volume and price occur, filtering out noise and increasing the likelihood of profitable trades.
⚙️ SETTINGS
1. General Configuration
Anchor Period: Time anchor period used in CVD calculation. This is essentially the period that the volume delta sum will be reset. Lower timeframes may result in more entries at the cost of less reliable results.
Entry Mode: Choose between FVGs or OBs to trigger your entries based on the confirmation signals.
Retracement Requirement: Enable to confirm the entry after a retracement toward the FVG or OB.
2. Fair Value Gaps
FVG Sensitivity: Modify the sensitivity of FVG detection, allowing for more or fewer gaps to be considered valid.
3. Order Blocks (OB)
Swing Length: Define the swing length to identify OB formations. Shorter lengths find smaller OBs, while longer lengths detect larger structures.
4. TP / SL
TP / SL Method:
a) Dynamic: The TP / SL zones will be auto-determined by the algorithm based on the Average True Range (ATR) of the current ticker.
b) Fixed : You can adjust the exact TP / SL ratios from the settings below.
Dynamic Risk: The risk you're willing to take if "Dynamic" TP / SL Method is selected. Higher risk usually means a better winrate at the cost of losing more if the strategy fails. This setting is has a crucial effect on the performance of the indicator, as different tickers may have different volatility so the indicator may have increased performance when this setting is correctly adjusted.
Buy/Sell IndicatorBuy/Sell Indicator
Overview
The Buy/Sell Indicator is designed to help traders identify potential entry and exit points in the market using a combination of Simple Moving Averages (SMA) and the Relative Strength Index (RSI). This indicator plots buy and sell signals directly on the chart, making it easier to make informed trading decisions.
Inputs
Fast MA Length: The period for the fast-moving average. Default is 9.
Slow MA Length: The period for the slow-moving average. Default is 21.
RSI Length: The period for the RSI calculation. Default is 14.
RSI Overbought Level: The RSI level considered overbought. Default is 70.
RSI Oversold Level: The RSI level considered oversold. Default is 30.
How It Works
Moving Averages:
The indicator calculates two SMAs: a fast-moving average (fastMA) and a slow-moving average (slowMA).
The fast MA reacts more quickly to price changes, while the slow MA reacts more slowly.
RSI:
The RSI is calculated to measure the momentum of price movements.
It helps identify overbought and oversold conditions in the market.
Buy and Sell Conditions:
Buy Signal: A buy signal is generated when the fast MA crosses above the slow MA and the RSI is below the overbought level.
Sell Signal: A sell signal is generated when the fast MA crosses below the slow MA and the RSI is above the oversold level.
Plotting
Buy Signals: Displayed as green labels below the bars where the buy condition is met.
Sell Signals: Displayed as red labels above the bars where the sell condition is met.
Moving Averages: The fast MA is plotted in blue, and the slow MA is plotted in orange.
Volumatic Variable Index Dynamic Average [BigBeluga]The Volumatic VIDYA (Variable Index Dynamic Average) indicator is a trend-following tool that calculates and visualizes both the current trend and the corresponding buy and sell pressure within each trend phase. Using the Variable Index Dynamic Average as the core smoothing technique, this indicator also plots volume levels of lows and highs based on market structure pivot points, providing traders with key insights into price and volume dynamics.
Additionally, it generates delta volume values to help traders evaluate buy-sell pressure balance during each trend, making it a powerful tool for understanding market sentiment shifts.
BTC:
TSLA:
🔵 IDEA
The Volumatic VIDYA indicator's core idea is to provide a dynamic, adaptive smoothing tool that identifies trends while simultaneously calculating the volume pressure behind them. The VIDYA line, based on the Variable Index Dynamic Average, adjusts according to the strength of the price movements, offering a more adaptive response to the market compared to standard moving averages.
By calculating and displaying the buy and sell volume pressure throughout each trend, the indicator provides traders with key insights into market participation. The horizontal lines drawn from the highs and lows of market structure pivots give additional clarity on support and resistance levels, backed by average volume at these points. This dual analysis of trend and volume allows traders to evaluate the strength and potential of market movements more effectively.
🔵 KEY FEATURES & USAGE
VIDYA Calculation:
The Variable Index Dynamic Average (VIDYA) is a special type of moving average that adjusts dynamically to the market’s volatility and momentum. Unlike traditional moving averages that use fixed periods, VIDYA adjusts its smoothing factor based on the relative strength of the price movements, using the Chande Momentum Oscillator (CMO) to capture the magnitude of price changes. When momentum is strong, VIDYA adapts and smooths out price movements quicker, making it more responsive to rapid price changes. This makes VIDYA more adaptable to volatile markets compared to traditional moving averages such as the Simple Moving Average (SMA) or the Exponential Moving Average (EMA), which are less flexible.
// VIDYA (Variable Index Dynamic Average) function
vidya_calc(src, vidya_length, vidya_momentum) =>
float momentum = ta.change(src)
float sum_pos_momentum = math.sum((momentum >= 0) ? momentum : 0.0, vidya_momentum)
float sum_neg_momentum = math.sum((momentum >= 0) ? 0.0 : -momentum, vidya_momentum)
float abs_cmo = math.abs(100 * (sum_pos_momentum - sum_neg_momentum) / (sum_pos_momentum + sum_neg_momentum))
float alpha = 2 / (vidya_length + 1)
var float vidya_value = 0.0
vidya_value := alpha * abs_cmo / 100 * src + (1 - alpha * abs_cmo / 100) * nz(vidya_value )
ta.sma(vidya_value, 15)
When momentum is strong, VIDYA adapts and smooths out price movements quicker, making it more responsive to rapid price changes. This makes VIDYA more adaptable to volatile markets compared to traditional moving averages
Triangle Trend Shift Signals:
The indicator marks trend shifts with up and down triangles, signaling a potential change in direction. These signals appear when the price crosses above a VIDYA during an uptrend or crosses below during a downtrend.
Volume Pressure Calculation:
The Volumatic VIDYA tracks the buy and sell pressure during each trend, calculating the cumulative volume for up and down bars. Positive delta volume occurs during uptrends due to higher buy pressure, while negative delta volume reflects higher sell pressure during downtrends. The delta is displayed in real-time on the chart, offering a quick view of volume imbalances.
Market Structure Pivot Lines with Volume Labels:
The indicator draws horizontal lines based on market structure pivots, which are calculated using the highs and lows of price action. These lines are extended on the chart until price crosses them. The indicator also plots the average volume over a 6-bar range to provide a clearer understanding of volume dynamics at critical points.
🔵 CUSTOMIZATION
VIDYA Length & Momentum: Control the sensitivity of the VIDYA line by adjusting the length and momentum settings, allowing traders to customize the smoothing effect to match their trading style.
Volume Pivot Detection: Set the number of bars to consider for identifying pivots, which influences the calculation of the average volume at key levels.
Band Distance: Adjust the band distance multiplier for controlling how far the upper and lower bands extend from the VIDYA line, based on the ATR (Average True Range).
