Please read the description carefully before using !
what are Liquidation levels ? Liquidation Levels are estimates of potential price levels where liquidation events may occur based on the the Leverage used ! for example : 100x , 50x and 25x leverage
so main purpose of the indicator is to show an exact level of a specific leverage where it get liquidated when hits by price !
.....
.....
Currently the indicator Support 4 major Exchanges ( Binance , Bybit , FTX , Bitmex ) while a user can filter and request liquidity based on 7 different tiers or level of granularity !
Since every exchange has different amount of Liquidity , liquidation levels might be different from one to other exchange , as an example Binance has higher liquidation levels than the rest !
// About Settings and parts !
the indicator consist of :-
2 parts related to Liquidation levels ( Bubble graph , Heatmap liquidation levels) ,
note : bubble graph is available at 1 to 5 minute time frame.
Heatmap is available from 1 to 30 minute time frame .
..
Single print levels , available at all time frames and can be used for all assets !
3 part related to protentional reversal signals ( SQ signal , Absorption signal , big trade signal ( rug , up ))
----------------------------------------------------------------------
Some important note :
1- Use one Liquidation mode at a time , if you enable both , you will miss some levels as indicator will delete them due to Tv restriction for drawing lines and historical bar back !
2- use the indicator Under 5 minute specially Liquidation parts , as it meant to be used for scalping .
3- if your looking for bigger levels Use Single print levels aka 'SP'
----------------------------------
Some tips for trading Using this tool;-
Liquidation levels are like magnets specially after a Harsh move , price tends to go toward liquidation zone, so one can reverse trade those liquidation levels as market reverse after Liquidation hunts !
..
what are Liquidation levels ? Liquidation Levels are estimates of potential price levels where liquidation events may occur based on the the Leverage used ! for example : 100x , 50x and 25x leverage
so main purpose of the indicator is to show an exact level of a specific leverage where it get liquidated when hits by price !
Currently the indicator Support 4 major Exchanges ( Binance , Bybit , FTX , Bitmex ) while a user can filter and request liquidity based on 7 different tiers or level of granularity !
Since every exchange has different amount of Liquidity , liquidation levels might be different from one to other exchange , as an example Binance has higher liquidation levels than the rest !
// About Settings and parts !
the indicator consist of :-
2 parts related to Liquidation levels ( Bubble graph , Heatmap liquidation levels) ,
note : bubble graph is available at 1 to 5 minute time frame.
Heatmap is available from 1 to 30 minute time frame .
Single print levels , available at all time frames and can be used for all assets !
3 part related to protentional reversal signals ( SQ signal , Absorption signal , big trade signal ( rug , up ))
Some important note :
1- Use one Liquidation mode at a time , if you enable both , you will miss some levels as indicator will delete them due to Tv restriction for drawing lines and historical bar back !
2- use the indicator Under 5 minute specially Liquidation parts , as it meant to be used for scalping .
3- if your looking for bigger levels Use Single print levels aka 'SP'
----------------------------------
Some tips for trading Using this tool;-
Liquidation levels are like magnets specially after a Harsh move , price tends to go toward liquidation zone, so one can reverse trade those liquidation levels as market reverse after Liquidation hunts !
Catatan Rilis:
1- Added SQ Signals ..
now you can filter SQ signals based on volume , ex: only show SQ signal when there SQ volume is > number
if you want to see all SQ signals , put zero at filter .
note filter is not effecting yellow SQ
2 - added main S/R
mode of S/R changes right with changing Trade mode , so when you change to scalp s/r changed to scalp and so on !
3 - added huge trade signal ( only one minute ) specially to hunt 200mil guys ;-)
4- some color fix ..
now you can filter SQ signals based on volume , ex: only show SQ signal when there SQ volume is > number
if you want to see all SQ signals , put zero at filter .
note filter is not effecting yellow SQ
2 - added main S/R
mode of S/R changes right with changing Trade mode , so when you change to scalp s/r changed to scalp and so on !
3 - added huge trade signal ( only one minute ) specially to hunt 200mil guys ;-)
4- some color fix ..
Catatan Rilis:
repaint fix !
and absorption option is back !
and absorption option is back !
Catatan Rilis:
complete code re-touch ..
fix when tiers could not load
Bybit added !
fix when tiers could not load
Bybit added !
Catatan Rilis:
just fixed some typo
Catatan Rilis:
Bubble graph added which is available upto 5 minute !
Binance liquidation added !
code retouch !
Binance liquidation added !
code retouch !
Catatan Rilis:
fixed error at Bitmex ..
Catatan Rilis:
added ability to be loaded on any BTC chart ..
Catatan Rilis:
Added :-
1 - SQ Signal Alert ( now you can put alert for SQ signals )
2- Ability to see Bubble LIQ size ( hover moves over bubble to see its size , note: it only shows size of bubbles for past 1000 bar)
3- SP levels , which are break out , break down areas .. which price will retest them most of time ..
4- adjusted some tiers ..
1 - SQ Signal Alert ( now you can put alert for SQ signals )
2- Ability to see Bubble LIQ size ( hover moves over bubble to see its size , note: it only shows size of bubbles for past 1000 bar)
3- SP levels , which are break out , break down areas .. which price will retest them most of time ..
4- adjusted some tiers ..
Catatan Rilis:
Ability to change SP line color , width and style !
Catatan Rilis:
FTX Liquidity added !
Catatan Rilis:
Added Bubble mode - where you can simple enable/disable bubble mode in one click instead of removing all leverages
adjusted Binance Tiers .
adjusted Binance Tiers .
Catatan Rilis:
wave cycle added !
Catatan Rilis:
Better setting grouping ..
Catatan Rilis:
Removed FTX
added ability to see only one side of liquidity ( longs or shorts) in heatmap
added ability to see only one side of liquidity ( longs or shorts) in heatmap
Catatan Rilis:
added leverage for heatmap
both bitmex and bybit heatmap are available
some bug fix
both bitmex and bybit heatmap are available
some bug fix
Catatan Rilis:
added :-
1- Visible range (requested): now you can watch for Liquidation levels only in current range
your chart is on ( first and last visible candle on your current chart) , whats used for ? to filter liq levels in any specified range you like.
Note : if its ON, everything outside the range will be deleted , like line or Bubbles, and it will be updated if chart moved or scrolled .
2- Up/Rug! signals(requested): its now can be ploted upto 5 min, you can disable/enable it easily in signals setting.
3- Bubble size : now with hovering mouse over bbubles you can see its size.
4- Bubble mode can be ploted upto 15 min
and finally updated code for smarter calculation, bypassing some limitation, and auto shift to higher tier when you leave lower time frame .
and fixed bugs.
1- Visible range (requested): now you can watch for Liquidation levels only in current range
your chart is on ( first and last visible candle on your current chart) , whats used for ? to filter liq levels in any specified range you like.
Note : if its ON, everything outside the range will be deleted , like line or Bubbles, and it will be updated if chart moved or scrolled .
2- Up/Rug! signals(requested): its now can be ploted upto 5 min, you can disable/enable it easily in signals setting.
3- Bubble size : now with hovering mouse over bbubles you can see its size.
4- Bubble mode can be ploted upto 15 min
and finally updated code for smarter calculation, bypassing some limitation, and auto shift to higher tier when you leave lower time frame .
and fixed bugs.
Catatan Rilis:
fixed typo
Catatan Rilis:
bug fixed ..
Catatan Rilis:
Added SQ signal Volume filter , where you can flag SQ signals based on its volume .
some color change and ticker support !
some color change and ticker support !
Catatan Rilis:
Added - Aggregated Heatmap ,
Added filter for up/rug signals,
Added alerts for up/rug Signals
Added filter for up/rug signals,
Added alerts for up/rug Signals
Catatan Rilis:
error fix ..
Catatan Rilis:
re added old heatmap
fixed , bitmex and bybit tickers after ticker name change.
fixed , bitmex and bybit tickers after ticker name change.
Catatan Rilis:
no big change , just tier mode changed
Catatan Rilis:
ticker name change update.
Catatan Rilis:
added : total short and long liquidation statistics
added : alert for absorption
added : remove broken line option
added : alert for absorption
added : remove broken line option
Catatan Rilis:
1- Support BTC ( Bybit , bitmex, Binance ) and all Binance perp tickers ( Altcoins)
2- complete retouch of code , tiers
3- support all time frames ..
4- smart mode for tiers based on timeframe.
5- removed heatmao since we will be having separate one
2- complete retouch of code , tiers
3- support all time frames ..
4- smart mode for tiers based on timeframe.
5- removed heatmao since we will be having separate one
Catatan Rilis:
error fix .
Catatan Rilis:
fixed ticker error
Catatan Rilis:
now SP levels can be used on Stocks and any other ticker.
Catatan Rilis:
added , S/R ribbon , P9 signals , possible bottom level , moon phases .. and some improvement.