Mulai

W-VWAP

VWAP + Multi-Timeframe RSI StrategyThis strategy combines VWAP trend direction with confirmation from RSI on a higher timeframe. The idea is to only take trades when both intraday momentum and higher-timeframe trend are aligned, increasing accuracy. LONG Entry: Price above VWAP (bullish environment). RSI on the current timeframe is below overbought (room to rise). RSI on the higher timeframe (default H1) is above 50 (bullish confirmation). SHORT Entry: Price below VWAP (bearish environment). RSI on the current timeframe is above oversold (room to fall). RSI on the higher timeframe is below 50 (bearish confirmation). Exit Rule: Stop-loss near VWAP. Take-profit at ~2x risk or when major levels are reached. Best Timeframes: Use 15m or 30m chart with H1 RSI for intraday trading. Use 1H chart with Daily RSI for swing trading. ⚡ The higher-timeframe RSI filter reduces false signals and aligns trades with institutional flow.
Strategi Pine Script®
oleh dreamflysec
VWAP Pullback + RSI ConfirmationThis strategy focuses on trend continuation entries. Instead of betting on reversions, it looks for opportunities when price pulls back to VWAP but the dominant trend remains intact. Trend Bias: Price above VWAP = bullish environment → look for BUY pullbacks. Price below VWAP = bearish environment → look for SELL pullbacks. Entry Logic: BUY: Price pulls back near VWAP, RSI stays above oversold (momentum intact). SELL: Price pulls back near VWAP, RSI stays below overbought (momentum intact). Exit Rule: Stop-loss just below/above VWAP. Take-profit at 1.5–2x risk (default script uses ~2%). Best Timeframes: 15m–1H → good for intraday trend-following setups. Daily → captures stronger, longer trends. ⚡ This strategy is powerful in trending markets because VWAP acts as a "magnet" for pullbacks, while RSI prevents overbought/oversold traps.
Strategi Pine Script®
oleh dreamflysec
Futures Playbook: VWAP + OR + Cross-Asset TellsFutures Playbook: VWAP + OR + Cross-Asset Tells (with Trade Messages + Coach Panel) This all-in-one futures trading toolkit combines Opening Range (OR) levels, VWAP, and cross-asset signals to help traders quickly read intraday structure, manage execution, and filter noise. Core Features • Opening Range (OR): • Customizable OR window with High/Low and Midpoint. • Automatic shading of the OR zone. • VWAP & Bands: • Built-in or session-anchored VWAP. • Optional standard deviation bands for context. • Cross-Asset Tells: • Live reads on US 10Y yield, DXY, Crude, and Gold. • Regime detection: rates risk, USD strength, energy softness, and real-rate easing. • Confirmations: • Volume vs. moving average filter. • Cumulative delta with smoothing. • ATR-based chop filter to avoid low-quality trends. Trade Messages + Coach Panel • Trade Messages (labels): Automatic on-chart prompts for OR completion, VWAP reclaim/loss, long/short setups, and EU close flows. • Coach Panel (table): Real-time dashboard with regime context, directional bias, execution notes, risk reminders, and key levels (ORH, ORL, VWAP). Alerts • OR breakout (long/short with confirmations). • VWAP reclaim or loss. • 10Y yield crossing risk threshold. Use Case Designed for futures traders and scalpers who rely on VWAP + OR dynamics and need cross-asset confirmation before committing to trades. Great for structuring entries, managing risk, and filtering market noise throughout the session.
Indikator Pine Script®
oleh TheFuturesPlaybook
Hybrid Trend MAHybrid Trend MA (Pine Script v6) This indicator combines Exponential Moving Averages (EMA) and Arnaud Legoux Moving Averages (ALMA) into a single hybrid trend-following tool. It is designed to help traders visualize medium- and long-term trend directions while also capturing smoother short-term signals. Key Features: EMA Trend Structure Three EMAs are plotted (lengths: 38, 62, 200). Each EMA line changes color depending on whether it is rising or falling relative to the others: Red → Strong uptrend alignment. Lime → Strong downtrend alignment. Aqua → Neutral or transition. The indicator also fills the space between EMA zones with silver shading to highlight trend channels. ALMA Trend Confirmation Two ALMA curves are plotted (lengths: 13, 50). Similar rising/falling logic is applied to color them: Red → Bullish alignment and rising. Green → Bearish alignment and falling. Cyan → Neutral or uncertain trend. A cross marker is plotted whenever the fast and slow ALMA lines cross, which may serve as an entry/exit confirmation. Customizable Smoothing The smoothe setting controls how many bars are checked to confirm whether an EMA or ALMA is rising/falling, helping reduce noise. How to Use: Trend Identification: The EMA set shows the larger market structure. When all EMAs align in direction and color, the trend is stronger. Entry & Exit Confirmation: The ALMA cross signals can be used to refine entries and exits within the broader EMA trend. Dynamic Visuals: Colored EMAs + ALMAs make it easy to distinguish bullish, bearish, and ranging conditions at a glance.
Indikator Pine Script®
oleh leehenry303
Volume Pressure Arrows[Blk0ut]Volume Pressure Arrows are an innovative (I think) market pressure tool designed to cut through noise and provide traders with a realistic, but quick insight into buying vs selling pressure and which has real control. Rather than relying on any single classic indicator, this script blends five complementary measures of price–volume dynamics—Cumulative Volume Delta (CVD), VWAP distance, OBV slope, ATR expansion, and the DMI ratio—into a unified “pressure score.” Each component is normalized, weighted, and combined into a single metric that can be read at a glance through intuitive up and down arrows plotted directly on the chart. By transforming multiple complex data streams into a single aggregated signal, Volume Pressure Arrows help traders answer some of the hardest questions we can face: is the current move backed by conviction? is there true momentum? Is price action about to reverse? Why It’s Different Traditional oscillators often create conflicting signals, forcing traders to guess which one to trust. This indicator integrates five perspectives on volume and momentum pressure into a single framework, balancing raw flow (CVD), relative positioning (VWAP), trend conviction (OBV slope), volatility expansion (ATR), and directional bias (DMI). The result is a weighted, probability-minded score capped between -100 and +100 for consistency and clarity. Important note : Inspiration for the use of directly plotted arrows came from dgtrd "https://www.tradingview.com/u/dgtrd/" and their brilliant work on LazyBear's Squeeze Indicator "https://www.tradingview.com/script/Dsr7B2xE-Squeeze-Momentum-Indicator-LazyBear-vX-by-DGT/" How to Read It Bullish Arrows appear below the candles when the pressure score pushes above the neutral threshold, signaling meaningful buyer dominance. Bearish Arrows appear above the candles when pressure drops below the negative threshold, indicating strong selling pressure. Neutral Arrows (smaller, faded) mark conditions where pressure exists but is not decisive—useful for spotting early rotations or fading momentum. Color Gradients dynamically adjust with score intensity, making stronger signals visually brighter and weaker ones softer. How to Use It Effectively This tool is best applied as a confirmation and timing layer. It is not meant to replace your core strategy, but to validate whether momentum pressure supports your trade thesis. Combine with trendlines, chart patterns, or breakouts to gauge conviction. Use bullish or bearish arrows as filters, only take trades when price action aligns with strong directional pressure. Watch neutral arrows near key levels; they often foreshadow balance breaking into directional moves. Adjust the weightings to emphasize the components that matter most to your style (e.g., more weight on CVD for scalpers, or ATR expansion for volatility traders). As with any indicator, this is not a magic ball and does not guarantee success. But it does allow you to increase the probability odds to your favor if you align it with your edge. Happy trading!
Indikator Pine Script®
oleh Blk0ut
Structural Liquidity Signals [BullByte]Structural Liquidity Signals (SFP, FVG, BOS, AVWAP) Short description Detects liquidity sweeps (SFPs) at pivots and PD/W levels, highlights the latest FVG, tracks AVWAP stretch, arms percentile extremes, and triggers after confirmed micro BOS. Full description What this tool does Structural Liquidity Signals shows where price likely tapped liquidity (stop clusters), then waits for structure to actually change before it prints a trigger. It spots: Liquidity sweeps (SFPs) at recent pivots and at prior day/week highs/lows. The latest Fair Value Gap (FVG) that often “pulls” price or serves as a reaction zone. How far price is stretched from two VWAP anchors (one from the latest impulse, one from today’s session), scaled by ATR so it adapts to volatility. A “percentile” extreme of an internal score. At extremes the script “arms” a setup; it only triggers after a small break of structure (BOS) on a closed bar. Originality and design rationale, why it’s not “just a mashup” This is not a mashup for its own sake. It’s a purpose-built flow that links where liquidity is likely to rest with how structure actually changes: - Liquidity location: We focus on areas where stops commonly cluster—recent pivots and prior day/week highs/lows—then detect sweeps (SFPs) when price wicks beyond and closes back inside. - Displacement context: We track the last Fair Value Gap (FVG) to account for recent inefficiency that often acts as a magnet or reaction zone. - Stretch measurement: We anchor VWAP to the latest N-bar impulse and to the Daily session, then normalize stretch by ATR to assess dislocation consistently across assets/timeframes. - Composite exhaustion: We combine stretch, wick skew, and volume surprise, then bend the result with a tanh transform so extremes are bounded and comparable. - Dynamic extremes and discipline: Rather than triggering on every sweep, we “arm” at statistical extremes via percent-rank and only fire after a confirmed micro Break of Structure (BOS). This separates “interesting” from “actionable.” Key concepts SFP (liquidity sweep): A candle briefly trades beyond a level (where stops sit) and closes back inside. We detect these at: Pivots (recent swing highs/lows confirmed by “left/right” bars). Prior Day/Week High/Low (PDH/PDL/PWH/PWL). FVG (Fair Value Gap): A small 3‑bar gap (bar2 high vs bar1 low, or vice versa). The latest gap often acts like a magnet or reaction zone. We track the most recent Up/Down gap and whether price is inside it. AVWAP stretch: Distance from an Anchored VWAP divided by ATR (volatility). We use: Impulse AVWAP: resets on each new N‑bar high/low. Daily AVWAP: resets each new session. PR (Percentile Rank): Where the current internal score sits versus its own recent history (0..100). We arm shorts at high PR, longs at low PR. Micro BOS: A small break of the recent high (for longs) or low (for shorts). This is the “go/no‑go” confirmation. How the parts work together Find likely liquidity grabs (SFPs) at pivots and PD/W levels. Add context from the latest FVG and AVWAP stretch (how far price is from “fair”). Build a bounded score (so different markets/timeframes are comparable) and compute its percentile (PR). Arm at extremes (high PR → short candidate; low PR → long candidate). Only print a trigger after a micro BOS, on a closed bar, with spacing/cooldown rules. What you see on the chart (legend) Lines: Teal line = Impulse AVWAP (resets on new N‑bar extreme). Aqua line = Daily AVWAP (resets each session). PDH/PDL/PWH/PWL = prior day/week levels (toggle on/off). Zones: Greenish box = latest Up FVG; Reddish box = latest Down FVG. The shading/border changes after price trades back through it. SFP labels: SFP‑P = SFP at Pivot (dotted line marks that pivot’s price). SFP‑L = SFP at Level (at PDH/PDL/PWH/PWL). Throttle: To reduce clutter, SFPs are rate‑limited per direction. Triggers: Triangle up = long trigger after BOS; triangle down = short trigger after BOS. Optional badge shows direction and PR at the moment of trigger. Optional Trigger Zone is an ATR‑sized box around the trigger bar’s close (for visualization only). Background: Light green/red shading = a long/short setup is “armed” (not a trigger). Dashboard (Mini/Pro) — what each item means PR: Percentile of the internal score (0..100). Near 0 = bullish extreme, near 100 = bearish extreme. Gauge: Text bar that mirrors PR. State: Idle, Armed Long (with a countdown), or Armed Short. Cooldown: Bars remaining before a new setup can arm after a trigger. Bars Since / Last Px: How long since last trigger and its price. FVG: Whether price is in the latest Up/Down FVG. Imp/Day VWAP Dist, PD Dist(ATR): Distance from those references in ATR units. ATR% (Gate), Trend(HTF): Status of optional regime filters (volatility/trend). How to use it (step‑by‑step) Keep the Safety toggles ON (default): triggers/visuals on bar‑close, optional confirmed HTF for trend slope. Choose timeframe: Intraday (5m–1h) or Swing (1h–4h). On very fast/thin charts, enable Performance mode and raise spacing/cooldown. Watch the dashboard: When PR reaches an extreme and an SFP context is present, the background shades (armed). Wait for the trigger triangle: It prints only after a micro BOS on a closed bar and after spacing/cooldown checks. Use the Trigger Zone box as a visual reference only: This script never tells you to buy/sell. Apply your own plan for entry, stop, and sizing. Example: Bullish: Sweep under PDL (SFP‑L) and reclaim; PR in lower tail arms long; BOS up confirms → long trigger on bar close (ATR-sized trigger zone shown). Bearish: Sweep above PDH/pivot (SFP‑L/P) and reject; PR in upper tail arms short; BOS down confirms → short trigger on bar close (ATR-sized trigger zone shown). Settings guide (with “when to adjust”) Safety & Stability (defaults ON) Confirm triggers at bar close, Draw visuals at bar close: Keep ON for clean, stable prints. Use confirmed HTF values: Applies to HTF trend slope only; keeps it from changing until the HTF bar closes. Performance mode: Turn ON if your chart is busy or laggy. Core & Context ATR Length: Bigger = smoother distances; smaller = more reactive. Impulse AVWAP Anchor: Larger = fewer resets; smaller = resets more often. Show Daily AVWAP: ON if you want session context. Use last FVG in logic: ON to include FVG context in arming/score. Show PDH/PDL/PWH/PWL: ON to see prior day/week levels that often attract sweeps. Liquidity & Microstructure Pivot Left/Right: Higher values = stronger/rarer pivots. Min Wick Ratio (0..1): Higher = only more pronounced SFP wicks qualify. BOS length: Larger = stricter BOS; smaller = quicker confirmations. Signal persistence: Keeps SFP context alive for a few bars to avoid flicker. Signal Gating Percent‑Rank Lookback: Larger = more stable extremes; smaller = more reactive extremes. Arm thresholds (qHi/qLo): Move closer to 0.5 to see more arms; move toward 0/1 to see fewer arms. TTL, Cooldown, Min bars and Min ATR distance: Space out triggers so you’re not reacting to minor noise. Regime Filters (optional) ATR percentile gate: Only allow triggers when volatility is at/above a set percentile. HTF trend gate: Only allow longs when the HTF slope is up (and shorts when it’s down), above a minimum slope. Visuals & UX Only show “important” SFPs: Filters pivot SFPs by Volume Z and |Impulse stretch|. Trigger badges/history and Max badge count: Control label clutter. Compact labels: Toggle SFP‑P/L vs full names. Dashboard mode and position; Dark theme. Reading PR (the built‑in “oscillator”) PR ~ 0–10: Potential bullish extreme (long side can arm). PR ~ 90–100: Potential bearish extreme (short side can arm). Important: “Armed” ≠ “Enter.” A trigger still needs a micro BOS on a closed bar and spacing/cooldown to pass. Repainting, confirmations, and HTF notes By default, prints wait for the bar to close; this reduces repaint‑like effects. Pivot SFPs only appear after the pivot confirms (after the chosen “right” bars). PD/W levels come from the prior completed candles and do not change intraday. If you enable confirmed HTF values, the HTF slope will not change until its higher‑timeframe bar completes (safer but slightly delayed). Performance tips If labels/zones clutter or the chart lags: Turn ON Performance mode. Hide FVG or the Trigger Zone. Reduce badge history or turn badge history off. If price scaling looks compressed: Keep optional “score”/“PR” plots OFF (they overlay price and can affect scaling). Alerts (neutral) Structural Liquidity: LONG TRIGGER Structural Liquidity: SHORT TRIGGER These fire when a trigger condition is met on a confirmed bar (with defaults). Limitations and risk Not every sweep/extreme reverses; false triggers occur, especially on thin markets and low timeframes. This indicator does not provide entries, exits, or position sizing—use your own plan and risk control. Educational/informational only; no financial advice. License and credits © BullByte - MPL 2.0. Open‑source for learning and research. Built from repeated observations of how liquidity runs, imbalance (FVG), and distance from “fair” (AVWAPs) combine, and how a small BOS often marks the moment structure actually shifts.
Indikator Pine Script®
oleh BullByte
VWAP FadeVWAP fade indicator simple parameters for how it works and the logic behind VWAP fade You can try other products but recommended for Copper/Silver futures due to how they tend to do the VWAP fade Identify VWAP retest: Price moves back into VWAP after trending away. Fail condition: Candle touches VWAP but fails to close across it (stays on trend side). Signal: Short if price came from below and fails to close above VWAP. Long if price came from above and fails to close below VWAP. Confirm with volume spike (optional filter).
Indikator Pine Script®
oleh AmandasTradesBang
2
Dynamic Swing Anchored VWAP STRAT (Zeiierman/PineIndicators)Dynamic Swing Anchored VWAP STRATEGY — Zeiierman × PineIndicators (Pine Script v6) A pivot-to-pivot Anchored VWAP strategy that adapts to volatility, enters long on bullish structure, and closes on bearish structure. Built for TradingView in Pine Script v6. Full credits to zeiierman. Repainting notice: The original indicator logic is repainting. Swing labels (HH/HL/LH/LL) are finalized after enough bars have printed, so labels do not occur in real time. It is not possible to execute at historical label points. Treat results as educational and validate with Bar Replay and paper trading before considering any discretionary use. Concept The script identifies swing highs/lows over a user-defined lookback ( Swing Period ). When structure flips (most recent swing low is newer than the most recent swing high, or vice versa), a new regime begins. At each confirmed pivot, a fresh Anchored VWAP segment is started and updated bar-by-bar using an EWMA-style decay on price×volume and volume. Responsiveness is controlled by Adaptive Price Tracking (APT) . Optionally, APT auto-adjusts with an ATR ratio so that high volatility accelerates responsiveness and low volatility smooths it. Longs are opened/held in bullish regimes and closed when the regime turns bearish. No short positions are taken by design. How it works (under the hood) Swing detection: Uses ta.highestbars / ta.lowestbars over prd to update swing highs (ph) and lows (pl), plus their bar indices (phL, plL). Regime logic: If phL > plL → bullish regime; else → bearish regime. A change in this condition triggers a re-anchor of the VWAP at the newest pivot. Adaptive VWAP math: APT is converted to an exponential decay factor ( alphaFromAPT ), then applied to running sums of price×volume and volume, producing the current VWAP estimate. Rendering: Each pivot-anchored VWAP segment is drawn as a polyline and color-coded by regime. Optional structure labels (HH/HL/LH/LL) annotate the swing character. Orders: On bullish flips, strategy.entry("L") opens/maintains a long; on bearish flips, strategy.close("L") exits. Inputs & controls Swing Period (prd) — Higher values identify larger, slower swings; lower values catch more frequent pivots but add noise. Adaptive Price Tracking (APT) — Governs the VWAP’s “half-life.” Smaller APT → faster/closer to price; larger APT → smoother/stabler. Adapt APT by ATR ratio — When enabled, APT scales with volatility so the VWAP speeds up in turbulent markets and slows down in quiet markets. Volatility Bias — Tunes the strength of APT’s response to volatility (above 1 = stronger effect; below 1 = milder). Style settings — Colors for swing labels and VWAP segments, plus line width for visibility. Trade logic summary Entry: Long when the swing structure turns bullish (latest swing low is more recent than the last swing high). Exit: Close the long when structure turns bearish. Position size: qty = strategy.equity / close × 5 (dynamic sizing; scales with account equity and instrument price). Consider reducing the multiplier for a more conservative profile. Recommended workflow Apply to instruments with reliable volume (equities, futures, crypto; FX tick volume can work but varies by broker). Start on your preferred timeframe. Intraday often benefits from smaller APT (more reactive); higher timeframes may prefer larger APT (smoother). Begin with defaults ( prd=50, APT=20 ); then toggle “Adapt by ATR” and vary Volatility Bias to observe how segments tighten/loosen. Use Bar Replay to watch how pivots confirm and how the strategy re-anchors VWAP at those confirmations. Layer your own risk rules (stops/targets, max position cap, session filters) before any discretionary use. Practical tips Context filter: Consider combining with a higher-timeframe bias (e.g., daily trend) and using this strategy as an entry timing layer. First pivot preference: Some traders prefer only the first bullish pivot after a bearish regime (and vice versa) to reduce whipsaw in choppy ranges. Deviations: You can add VWAP deviation bands to pre-plan partial exits or re-entries on mean-reversion pulls. Sessions: Session-based filters (RTH vs. ETH) can materially change behavior on futures and equities. Extending the script (ideas) Add stops/targets (e.g., ATR stop below last swing low; partial profits at k×VWAP deviation). Introduce mirrored short logic for two-sided testing. Include alert conditions for regime flips or for price-VWAP interactions. Incorporate HTF confirmation (e.g., only long when daily VWAP slope ≥ 0). Throttle entries (e.g., once per regime flip) to avoid over-trading in ranges. Known limitations Repainting: Swing labels and pivot confirmations depend on future bars; historical labels can look “perfect.” Treat them as annotations, not executable signals. Execution realism: Strategy includes commission and slippage fields, yet actual fills differ by venue/liquidity. No guarantees: Past behavior does not imply future results. This publication is for research/education only and not financial advice. Defaults (backtest environment) Initial capital: 10,000 Commission value: 0.01 Slippage: 1 Overlay: true Max bars back: 5000; Max labels/polylines set for deep swing histories Quick checklist Add to chart and verify that the instrument has volume. Use defaults, then tune APT and Volatility Bias with/without ATR adaptation. Observe how each pivot re-anchors VWAP and how regime flips drive entries/exits. Paper trade across several symbols/timeframes before any discretionary decisions. Attribution & license Original indicator concept and logic: Zeiierman — please credit the author. Strategy wrapper and publication: PineIndicators . License: CC BY-NC-SA 4.0 (Attribution-NonCommercial-ShareAlike). Respect the license when forking or publishing derivatives.
Strategi Pine Script®
oleh PineIndicators
9
VWAP Trend Strategy (Intraday) [KedarArc Quant]Description: An intraday strategy that anchors to VWAP and only trades when a local EMA trend gate and a volume participation gate are both open. It offers two entry templates—Cross and Cross-and-Retest—with an optional Momentum Exception for impulsive moves. Exits combine a TrendBreak (structure flips) with an ATR emergency stop (risk cap). Updates will be published under this script. Why this merits a new script This is not a simple “VWAP + EMA + ATR” overlay. The components are sequenced as gates and branches that *change the trade set* in ways a visual mashup cannot: 1. Trend Gate first (EMA fast vs. slow on the entry timeframe) Counter-trend VWAP crosses are suppressed. Many VWAP scripts fire on every cross; here, no entry logic even evaluates unless the trend gate is open. 2. Participation Gate second (Volume SMA × multiplier) This gate filters thin liquidity moves around VWAP. Without it, the same visuals would produce materially more false triggers. 3. Branching entries with structure awareness * Cross: Immediate VWAP cross in the trend direction. * Cross-and-Retest: Requires a revisit to VWAP vicinity within a lookback window (recent low near VWAP for longs; recent high for shorts). This explicitly removes first-touch fakeouts that a plain cross takes. * Momentum Exception (optional): A quantified body% + volume condition can bypass the retest when flow is impulsive—intentional risk-timing, not “just another indicator.” 4. Dual exits that reference both anchor and structure * TrendBreak: Close only when price loses VWAP and EMA alignment flips. * ATR stop: Placed at entry to cap tail risk. These exits complement the entry structure rather than being generic stop/target add-ons. What it does * Trades the session’s fair value anchor (VWAP), but only with local-trend agreement (EMA fast vs. slow) and sufficient participation (volume filter). * Lets you pick Cross or Cross-and-Retest entries; optionally allow a fast Momentum Exception when candles expand with volume. * Manages positions with a structure exit (TrendBreak) and an emergency ATR stop from entry. How it works (concepts & calculations) * VWAP (session anchor): Standard VWAP of the active session; entries reference the cross and the retest proximity to VWAP. * Trend gate: Long context only if `EMA(fast) > EMA(slow)`; short only if `EMA(fast) < EMA(slow)`. A *gate*, not a trigger—entries aren’t considered unless this is true. * Participation (volume) gate: Require `volume > SMA(volume, volLen) × volMult`. Screens out low-participation wiggles around VWAP. Entries: * Cross: Price crosses VWAP in the trend direction while volume gate is open. * Cross-and-Retest: After crossing, price revisits VWAP vicinity within `lookback` (recent *low near VWAP* for longs; recent *high near VWAP* for shorts). * Momentum Exception (optional): If body% (|close−open| / range) and volume exceed thresholds, enter without waiting for the retest. Exits: * TrendBreak (structure): * Longs close when `price < VWAP` and `EMA(fast) < EMA(slow)` (mirror for shorts). * ATR stop (risk): * From entry: `stop = entry ± ATR(atrLen) × atrMult`. How to use it ? 1. Select market & timeframe: Intraday on liquid symbols (equities, futures, crypto). 2. Pick entry mode: * Start with Cross-and-Retest for fewer, more selective signals. * Enable Momentum Exception if strong moves leave without retesting. 3. Tune guards: * Raise `volMult` to ignore thin periods; lower it for more activity. * Adjust `lookback` if retests come late/early on your symbol. 4. Risk: * `atrLen` and `atrMult` set the emergency stop distance. 5. Read results per session: Optional panel (if enabled) summarizes Net-R, Win%, and PF for today’s session to evaluate behavior regime by regime. ⚠️ Disclaimer This script is provided for educational purposes only. Past performance does not guarantee future results. Trading involves risk, and users should exercise caution and use proper risk management when applying this strategy.
Strategi Pine Script®
oleh kedarcquant
Monthly VWAPDescription This indicator identifies potential mean reversion opportunities by tracking price deviations from monthly VWAP with dynamic volatility-adjusted thresholds. Core Logic: The indicator monitors when price moves significantly away from monthly VWAP and looks for potential reversal opportunities. It uses ATR-based dynamic thresholds that adapt to current market volatility, combined with volume confirmation to filter out weak signals. Key Features: Adaptive Thresholds: ATR-based bands that adjust to market volatility Volume Confirmation: Requires average volume spike to validate signals Monthly Reset: VWAP anchors reset each month for fresh reference levels Visual Clarity: Color-coded deviation line with background highlights for active signals Info Panel: Shows days from anchor and current price context vs fair value Signal Generation: Buy Signal: Price below monthly VWAP by threshold amount with elevated volume Sell Signal: Price above monthly VWAP by threshold amount with elevated volume Neutral: Price within threshold range or insufficient volume Best Used For: Mean reversion strategies in ranging markets Identifying potential oversold/overbought conditions Understanding price position relative to monthly fair value
Indikator Pine Script®
oleh Mihkel00
1
Weekly VwapsThe Weekly Vwaps indicator lets you plot weekly Volume-Weighted Average Price (VWAP) lines for up to six months of your choosing, with years ranging from 2020 to 2050. It’s a focused tool pulled straight from the weekly VWAP section of the Advanced VWAP Calendar indicator, keeping all the same controls and look but expanded to handle more months. You can use it alongside the original indicator if you need extra weekly VWAPs (up to 30 lines total) or run it on its own for a clean, dedicated setup. How It Works: Six Month Groups: Pick any six months (e.g., Jan 2020, Sep 2025, or Jul 2040) and enable up to five weekly VWAPs per month (W1–W5), starting from Monday midnight. Default Setup: Loads with September 2025 VWAPs turned on, with other months (August–April 2025) off but ready to enable. All default to 2025. Customization: Toggle all weeks in a month or pick specific ones. Adjust label sizes (tiny to huge) and line widths (1–5). Colors are teal, fuchsia, red, green, and yellow/orange for weeks 1–5, with clear labels like “W1 Sep 2025 123.45”. Label Control: A “Show All Labels” switch lets you hide labels to keep your chart tidy. Intraday Only: Works on intraday timeframes (e.g., 5-minute, 1-hour) for accurate VWAPs. Why Use It: Add to Advanced VWAP Calendar: If the original’s two-month limit isn’t enough, this adds six more months of weekly VWAPs for deeper analysis. Standalone Option: Perfect if you only want weekly VWAPs without other features, with flexibility to pick any months and years. User-Friendly: Ready to go with September 2025 enabled, easy to tweak for past or future data. Get Started: Add it to your TradingView chart, and September 2025 VWAPs will show up instantly. Adjust months, years, or toggles in the settings to focus on what you need. Test it on intraday charts and use the label toggle to manage clutter. Great for traders wanting precise, customizable weekly VWAPs!
Indikator Pine Script®
oleh fragilety
FuTech : Preferential Price📌 First Ever Indicator : FuTech : Preferential Price 💡 What if you could instantly know the Preferential Price — as if the company announced a preferential issue in today’s meeting surprisingly? Normally, you’d be stuck with tedious valuation spreadsheets and SEBI formula checks 🧮📑… ✨ But not anymore — this tool does the hard work for you! With just one click, it auto-calculates the Preferential Issue Floor Price under SEBI ICDR Regulations, 2018 - Regulation 164 (as amended), directly from your chart symbol. ✅ How it works ? 📅 Relevant Date = 30 days prior to either: • Today’s date (default mode) • Or your chosen EGM date (user input) 📊 For the Relevant Date, the indicator automatically computes: • VWAP (90 trading days preceding Relevant Date) • VWAP (10 trading days preceding Relevant Date) 🔎 As per SEBI Reg.164, the higher of these two VWAPs is selected as the Minimum Issue Price (Preferential Price). 💰 Price is neatly formatted in Indian style (e.g. ₹1,00,000). ✅ Key Features: ⚡ Auto-calculates from chart symbol — no manual entry. 🎛️ Option to input EGM date for accurate floor price compliance. 🎨 Fully customizable: text color, size, background, position. 🪄 Clean display → shows only the final Preferential Price (Reg.164). 📌 Usage: This indicator is built for analysts, fund managers, and corporate professionals dealing with Preferential Allotment pricing compliance. It ensures quick visibility of the floor price under SEBI ICDR rules, directly on your chart. ⚠️ Disclaimer: 📌 The calculated Preferential Price is an approximation based on SEBI ICDR Reg.164 methodology. 📊 Actual price determined by the company / merchant banker may vary slightly (±5) due to rounding, data source differences, or timing adjustments. 📅 Ensure to verify with official exchange data and SEBI filings before relying on these numbers. 📝 This tool is meant for analytical and educational purposes only, not a substitute for regulatory or professional advice.
Indikator Pine Script®
oleh Atmiya_aatubhai
EMA/VWAP SuiteEMA/VWAP Suite Overview The EMA/VWAP Suite is a versatile and customizable Pine Script indicator designed for traders who want to combine Exponential Moving Averages (EMAs) and Volume Weighted Average Prices (VWAPs) in a single, powerful tool. It overlays up to eight EMAs and six VWAPs (three anchored, three rolling) on the chart, each with percentage difference labels to show how far the current price is from these key levels. This indicator is perfect for technical analysis, supporting strategies like trend following, mean reversion, and VWAP-based trading. By default, the indicator displays eight EMAs and a session-anchored VWAP (AVWAP 1, in fuchsia) with their respective percentage difference labels, keeping the chart clean yet informative. Other VWAPs and their bands are disabled by default but can be enabled and customized as needed. The suite is designed to minimize clutter while providing maximum flexibility for traders. Features - Eight Customizable EMAs: Plot up to eight EMAs with user-defined lengths (default: 3, 9, 19, 38, 50, 65, 100, 200), each with a unique color for easy identification. - EMA Percentage Difference Labels: Show the percentage difference between the current price and each EMA, displayed only for visible EMAs when enabled. - Three Anchored VWAPs: Plot VWAPs anchored to the start of a session, week, or month, with customizable source, offset, and band multipliers. AVWAP 1 (session-anchored, fuchsia) is enabled by default. - Three Rolling VWAPs: Plot VWAPs calculated over fixed periods (default: 20, 50, 100), with customizable source, offset, and band multipliers. - VWAP Bands: Optional upper and lower bands for each VWAP, based on standard deviation with user-defined multipliers. - VWAP Percentage Difference Labels: Display the percentage difference between the current price and each VWAP, shown only for visible VWAPs. Enabled by default to show the AVWAP 1 label. - Customizable Colors: Each VWAP has a user-defined color via input settings, with labels matching the VWAP line colors (e.g., AVWAP 1 defaults to fuchsia). Flexible Display Options: Toggle individual EMAs, VWAPs, bands, and labels on or off to reduce chart clutter. Settings The indicator is organized into intuitive setting groups: EMA Settings Show EMA 1–8 : Toggle each EMA on or off (default: all enabled). EMA 1–8 Length : Set the period for each EMA (default: 3, 9, 19, 38, 50, 65, 100, 200). Show EMA % Difference Labels : Enable/disable percentage difference labels for all EMAs (default: enabled). EMA Label Font Size (8–20) : Adjust the font size for EMA labels (default: 10, mapped to “tiny”). Anchored VWAP 1–3 Settings Show AVWAP 1–3 : Toggle each anchored VWAP on or off (default: AVWAP 1 enabled, others disabled). AVWAP 1–3 Color : Set the color for each VWAP line and its label (default: fuchsia for AVWAP 1, purple for AVWAP 2, teal for AVWAP 3). AVWAP 1–3 Anchor : Choose the anchor period (“Session,” “Week,” “Month”; default: Session for AVWAP 1, Week for AVWAP 2, Month for AVWAP 3). AVWAP 1–3 Source : Select the price source (default: hlc3). AVWAP 1–3 Offset : Set the horizontal offset for the VWAP line (default: 0). Show AVWAP 1–3 Bands : Toggle upper/lower bands (default: disabled). AVWAP 1–3 Band Multiplier : Adjust the standard deviation multiplier for bands (default: 1.0). Rolling VWAP 1–3 Settings Show RVWAP 1–3 : Toggle each rolling VWAP on or off (default: disabled). RVWAP 1–3 Color : Set the color for each VWAP line and its label (default: navy for RVWAP 1, maroon for RVWAP 2, fuchsia for RVWAP 3). RVWAP 1–3 Period Length : Set the period for the rolling VWAP (default: 20, 50, 100). RVWAP 1–3 Source : Select the price source (default: hlc3). RVWAP 1–3 Offset : Set the horizontal offset (default: 0). Show RVWAP 1–3 Bands : Toggle upper/lower bands (default: disabled). RVWAP 1–3 Band Multiplier : Adjust the standard deviation multiplier for bands (default: 1.0). VWAP Label Settings Show VWAP % Difference Labels : Enable/disable percentage difference labels for all VWAPs (default: enabled, showing AVWAP 1 label). VWAP Label Font Size (8–20) : Adjust the font size for VWAP labels (default: 10, mapped to “tiny”). How It Works EMAs : Calculated using ta.ema(close, length) for each user-defined period. Percentage differences are computed as ((close - ema) / close) * 100 and displayed as labels for visible EMAs when show_ema_labels is enabled. Anchored VWAPs : Calculated using ta.vwap(source, anchor, 1), where the anchor is determined by the selected timeframe (Session, Week, or Month). Bands are computed using the standard deviation from ta.vwap. Rolling VWAPs : Calculated using ta.vwap(source, length), with bands based on ta.stdev(source, length). Labels : Updated on each new bar (ta.barssince(ta.change(time) != 0) == 0) to show percentage differences. Labels are only displayed for visible EMAs/VWAPs to avoid clutter. Color Matching: VWAP labels use the same color as their corresponding VWAP lines, set via input settings (e.g., avwap1_color for AVWAP 1). Example Use Cases - Trend Following: Use longer EMAs (e.g., 100, 200) to identify trends and shorter EMAs (e.g., 3, 9) for entry/exit signals. - Mean Reversion: Monitor percentage difference labels to spot overbought/oversold conditions relative to EMAs or VWAPs. - VWAP Trading: Use the default session-anchored AVWAP 1 for intraday trading, adding weekly/monthly VWAPs or rolling VWAPs for broader context. - Intraday Analysis: Leverage the session-anchored AVWAP 1 (enabled by default) for day trading, with bands as support/resistance zones.
Indikator Pine Script®
oleh poor_dev
(Fixed-Range) Anchored VWAPThis "Fixed-Range Anchored VWAP" indicator allows traders full control over where the VWAP calculation begins and ends. VWAP combines both price and volume to reflect the true average price paid, often serving as a benchmark for gauging value, sentiment, and trend strength. With this tool, traders can anchor VWAP to any candle, optionally define an end point, or keep it running forward with a single toggle. Up to three bands can be added around VWAP, either as standard deviations or percentage offsets. How to Use The indicator is particularly useful for analyzing VWAP around significant events, like earnings announcements or sharp price swings, to identify support, resistance, and mean-reversion opportunities. Add the indicator and select a candle to set the Anchor. Choose an End point or enable Cancel End for an open-ended VWAP. Pick Std Dev or Percent for band mode. Turn on up to three bands, adjust multipliers, and set fill colors. Use VWAP and its bands to evaluate extensions, trend context, and fair value zones.
Indikator Pine Script®
oleh klizarazo
VWAP Price ChannelVWAP Price Channel cuts the crust off of a traditional price channel (Donchian Channel) by anchoring VWAPs at the highs and lows. By doing this, the flat levels, characteristic of traditional Donchian Channels, are no more! Author's Note: This indicator is formed with no inherent use, and serves solely as a thought experiment. > Concept I would be hesitant to call this a "predictive" indicator, however the behavior of it would suggest it could be considered at least partially predictive Essentially, the Anchored VWAPs creates something from otherwise nothing. While the DC upper or lower values are staying flat, the VWAPs improvise based on price and volume to project a level that may be a better representation of where future highs or lows may settle. Visually, this looks like we have cut off the corners of the Donchian Channel. Note: Notice how we are calculating values before the corners are realized. > Implementation While this is only a concept indicator, The specific application I've gone with for this, is a sort of supertrend-ish display (A Trend Flipping Trailing Stop Loss). The script uses basic logic to create a trend direction, and then displays the Anchored VWAPs as a form of trailing stop loss. While "In Trend", the script fills in the area between the VWAP and Price in the direction of trend. When new highs or lows are made while in trend, the opposite VWAP will start to generate at the new highs or lows. These happen on every new high or low, so they are not indicating the trend shift, but could be interpreted as breakout levels for the current trend direction in order for continuation. Note: All values are drawn live, but when using higher timeframes, there is a natural calculation discrepancy when using live data vs. historical. > Technicals In this script, I'm simply detecting new highs or lows from the DC and using those as the anchor frequency on the built-in VWAP function. So each time a new high or low is made based on DC, the VWAP function re-anchors to the high or low of the candle. Past that, I have implemented some logic in order to account for a common occurrence I faced during development. Frequently, the price would outpace the anchored VWAP, so we would end up with the VWAP being further from price than the actual DC upper or lower. Due to this, what I have ended up with was a third value which, rather than switching between raw VWAP values and DC values, it adjusts the value based on the change in the VWAP value. This can be simply thought of as a "Start + Change" type of setup. By doing this, I can use the change values from the actual anchored VWAP, and under normal conditions, this will also be the true VWAP value. However, situationally, I am able to update the start value which we're applying the VWAP change to. In other words, when these situations happen, the VWAP change is added to the new (closer to price) DC value. The specific trend logic being used is nothing fancy at all, we are simply checking if a new high or low is created and setting the trend in that direction. This is in line with some traditional DC Strategies. To those who made it here, Just remember: The chart may be ugly, but it's the fastest analysis of the data you can get. Nicer displays often come at the hidden cost of latency. You have to shoot your shot to make it. Choose 2: Fast, Clean, Useful Enjoy!
Indikator Pine Script®
oleh SamRecio
23
VWMA MACD Trend Grinder Buy/Sell SignalsDescription: This indicator combines a VWMA-based MACD with volume and trend filters to reduce false buy and sell signals. It is designed to give more reliable entry and exit points in trending markets while avoiding low-volume noise. Features: 1. VWMA MACD: - MACD is calculated using Volume-Weighted Moving Averages (VWMA) instead of standard EMAs. - Histogram shows the difference between MACD and its signal line. 2. Volume Filter: - Signals are only triggered when current volume exceeds a multiple of its moving average. - Reduces false signals in low-volume periods. 3. Trend Filter: - Only triggers buy signals when price is above a long-term VWMA (uptrend). - Only triggers sell signals when price is below the long-term VWMA (downtrend). - Helps avoid counter-trend trades. 4. Plots: - MACD (blue), Signal (orange), Histogram (green/red) - Trend VWMA (purple) - Buy and Sell arrows in the indicator pane (green/red) 5. Alerts: - Configurable alerts for buy and sell signals filtered by volume and trend. Inputs: - Fast Length: VWMA period for the fast MACD line (default 12) - Slow Length: VWMA period for the slow MACD line (default 26) - Signal Length: EMA period for the MACD signal line (default 9) - Volume MA Length: Length for volume moving average filter (default 20) - Volume Threshold Multiplier: Multiplier for volume filter (default 1.2) - Trend VWMA Length: Period for long-term trend VWMA (default 50) - Price Source: Close, HL2, HLC3, OHLC4 Usage: - Use as a confirmation tool along with other analysis techniques. - Buy when the green triangle appears (MACD crossover, above trend VWMA, sufficient volume). - Sell when the red triangle appears (MACD crossunder, below trend VWMA, sufficient volume). - Trend VWMA helps visually confirm the market trend.
Indikator Pine Script®
oleh kmarin137
Institutional Session VWAP Bands (Zeiierman)█ Overview Institutional Session VWAP Bands (Zeiierman) plots a clean, session-aware VWAP that restarts at the “True Close” (end of the first trading hour) for each session you enable (Sydney, Tokyo, London, New York). From that anchor, the script computes a classic volume-weighted average price plus optional standard-deviation bands to frame session fair value and dispersion. By aligning VWAP to when institutional flows settle (the first hour), you get a reference that matches real execution behavior, yielding more credible pullbacks, retests, and mean-reversion reads inside each session. █ How It Works ⚪ Session Detection You choose the sessions (on/off), their UTC-aligned time windows, and colors. The script detects when each session is active on your chart timeframe. ⚪ True-Close Anchoring At session open the indicator waits. When the first hour completes, it flips the anchor on and starts a fresh VWAP for that session, mirroring how many desks treat the first hour as the real close for the prior day’s positioning. ⚪ VWAP Core From the true-close anchor, VWAP is calculated in the standard way: cumulative (price × volume) / cumulative volume using your chosen price source (default hlc3). ⚪ VWAP Bands (σ) Upper/Lower bands are built using a running standard deviation of the price source since the anchor. You control the σ multiplier and line width, and you can optionally fill between the bands. █ Why Sessions + True-Close Anchoring ⚪ Institutional Timing Matters A new anchor at the first-hour close reflects where real flows have settled, giving you a session fair-value line that aligns with how many funds evaluate prices intraday. ⚪ Cleaner Session Reads Because VWAP and σ-bands restart each session, your retests, squeezes, and mean-reversion signals are based on today’s order-flow context, not yesterday’s inertia. Result: a session-true fair-value with dispersion bands that stay close to the action, improving the quality of pullback entries and risk framing. █ How to Use ⚪ Session Fair-Value Guide Treat VWAP as the magnet for intraday value. Impulsive moves away from VWAP that fold back often present retest opportunities. ⚪ σ-Band Reversion & Breaks Reversion: Tests beyond the upper/lower band that snap back inside can flag exhaustion. Trend: Price riding the VWAP band in a strong trend ⚪ Session Handoffs When one session hands to the next, watch how price behaves around the new session’s VWAP Bands after its anchor triggers. Continuation through the new VWAP vs. rejection often sets the tone. █ Settings UTC: Choose the timezone used to evaluate session windows (e.g., UTC+2). Sessions (Sydney, Tokyo, London, New York): Toggle visibility and define each HHMM-HHMM window. VWAP Price: Source for weighting. Band Multiplier (σ): Standard deviation multiplier. █ Related publications True Close – Institutional Trading Sessions (Zeiierman) ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Indikator Pine Script®
oleh Zeiierman
14
VWMA MACD Amanita Buy/Sell Signals VWMA MACD Amanita Buy/Sell Signals – Volume-Weighted Momentum Indicator A twist on the classic MACD: this indicator uses Volume Weighted Moving Averages (VWMA) instead of EMAs, giving more weight to price moves backed by higher volume. Features: VWMA-based MACD line & signal line Histogram highlights bullish/bearish momentum Color-coded for easy visualization Quick Guide: MACD above Signal → bullish MACD below Signal → bearish Rising histogram → strengthening trend Falling histogram → weakening trend Perfect for traders who want momentum confirmed by volume.
Indikator Pine Script®
oleh kmarin137
Frozen 4H VWAP – Precision AnchoredFrozen 4H VWAP – Precision Anchored Like Ice The Frozen 4H VWAP – Precision Anchored delivers a clean, stable, and reliable view of the 4-hour Volume Weighted Average Price, designed for traders who want higher timeframe insights without intrabar noise or repainting. 🔹 Key Features: Non-Repainting: VWAP value is “frozen” at the close of each 4H candle — no mid-bar updates or flickering. 4H Timeframe Anchoring: Seamlessly pulls 4-hour VWAP values into any timeframe you’re trading on. Clear Trend Reference: Updates only when a new 4H candle begins, acting as a trustworthy anchor for support/resistance. Custom Source Option: Choose from different price sources (default: HLC3) to fit your strategy. Whether you're scalping, day trading, or swing trading, this indicator gives you a powerful edge by grounding your decisions in higher timeframe VWAP data — clear, calm, and frozen in time.
Indikator Pine Script®
oleh Equanimity_raven
1