Mulai

Volume

Volume Voids [theUltimator5]Volume Voids highlights price regions with no or unusually thin participation over a chosen lookback. It bins the lookback’s full price range into equal steps, assigns each bar’s close to a bin, and accumulates volume per bin. Contiguous runs of zero-volume bins are shown as “voids,” while low-volume runs (below a dynamic threshold) mark thin-liquidity “corridors” where price often traverses quickly when revisited. An optional PoC (Point of Control) line marks the mid-price of the highest-volume bin—commonly treated as a recent “value” area that price may revisit. What it draws on your chart Histogram (optional): Right-anchored horizontal volume-by-price bars built from your lookback and bin count. Bars tint green→red via a simple delta proxy (up-bar volume minus down-bar volume) to hint at directional participation inside each price band. Point of Control (optional): A horizontal line at the highest-volume bin’s mid-price (the PoC). Zero-Volume Voids: Translucent boxes where no bin volume printed within the window (detected between the first and last non-empty bins ). Low-Volume Zones: Translucent boxes where bin volume is below a dynamic threshold (see formula below), often acting like low-friction corridors. How it works Slice the lookback’s high→low into N equal price bins. Assign each bar’s closing price to a bin and add that bar’s volume to the bin total. A simple up/down-bar delta proxy drives the histogram’s tinting. PoC = bin with the maximum accumulated volume. Zero-Volume Voids = contiguous runs of bins with exactly zero volume (bounded by the first/last occupied bins). Low-Volume Zones = contiguous runs of bins with volume below: threshold = total_window_volume ÷ (divisor × number_of_bins) Lower divisor → more LV boxes; higher divisor → stricter/fewer boxes. Note: This is a lightweight, chart-native approximation of a volume profile. Volume is binned by bar close (not by tick-level prints or intrabar distribution), so “voids”/“thin” areas reflect this approximation. Key inputs Lookback Period: Window for calculations. Number of Volume Boxes (bins): Histogram resolution. PoC / Show Histogram / Anchor to Right Side: Visibility and layout controls. Low-Volume Threshold Divisor: Sensitivity for LV detection. Colors & Labels: Customize zero-volume / low-volume box colors and optional labels with offsets. How to use (educational, not signals) Context: High-volume = acceptance; thin/zero-volume = inefficiency. Price often rotates near acceptance and moves faster through thin areas. Revisits: On returns to prior voids/LV zones, watch for accelerated moves or fills; PoC can serve as a balance reference. Confluence: Pair with trend tools (e.g., ADX), VWAP/session markers, or structure levels for timing and risk. Limitations & performance Bins use closing price only; intrabar distribution is not modeled. Detections refresh on the live bar; visuals can be heavy on large lookbacks/high bin counts—reduce bins/lookback or hide labels if needed.
Indikator Pine Script®
oleh TheUltimator5
Stop Loss Advisor📊 Stop Loss Advisor - Advanced Risk Management Tool A sophisticated Pine Script v5 indicator designed to suggest optimal stop loss distances based on market volatility, combining ATR and Standard Deviation analysis for precise risk management. 🎯 What Makes This Different from Bollinger Bands? While Bollinger Bands focus on mean reversion and overbought/oversold conditions using a moving average center line, this indicator is specifically designed for risk management . It creates dynamic bands around the current price to suggest where NOT to place your stop loss, preventing you from being stopped out by normal market noise. ⚡ Key Features Dynamic ATR Calculation - Fully customizable ATR periods with adaptive volatility filtering Standard Deviation Integration - Optional StdDev component for enhanced statistical accuracy Multiple Combination Modes - Average, Maximum, ATR Weighted, or StdDev Weighted Flexible Price Sources - Choose from Close, HL2, HLC3, or OHLC4 Automatic Pip Calculation - Works across all instruments with automatic pip value detection Smart Alerts System - Get notified when suggested stop loss exceeds your base risk tolerance Real-time Information Table - Displays current values and risk status Visual Labels - Shows exact pip distances directly on chart Band Smoothing - Prevents erratic movements with customizable averaging 📈 How It Works ATR Analysis : Calculates Average True Range to measure current market volatility Statistical Enhancement : Optionally combines with Standard Deviation for more robust calculations Dynamic Bands : Creates upper and lower bands that expand/contract with volatility Pip Conversion : Automatically converts distances to pips for easy interpretation Risk Assessment : Compares suggested distances with your base stop loss tolerance 🔧 Customization Options ATR Settings: Customizable ATR period (default: 14) Adjustable multiplier with 0.1 step precision Optional volatility filtering for enhanced sensitivity Standard Deviation (Optional): Independent period and multiplier settings Multiple price source options Four combination modes with ATR Visual Customization: Fully customizable colors for all elements Multiple line styles (solid, dashed, dotted) Optional band filling with transparency control Show/hide ATR line overlay Configurable band smoothing 💡 Perfect For Forex Traders - Especially effective on major pairs and XAUUSD Risk Managers - Calculate optimal stop distances before entering trades Scalpers - Avoid being stopped out by normal market fluctuations Swing Traders - Adapt stop losses to current volatility conditions 📊 Indicator Values The information table displays: Current ATR Value (in pips) Suggested Long Stop Loss (distance in pips) Suggested Short Stop Loss (distance in pips) Risk Status - "SAFE" or "HIGH RISK" based on your base tolerance Standard Deviation Value (when enabled) Combination Method (when using both ATR and StdDev) ⚠️ Important Notes This indicator suggests minimum stop loss distances, not entry/exit signals Always combine with your trading strategy and risk management rules Do not use as a standalone trading system Backtesting recommended before live implementation Default settings work well for most scenarios, but optimization is encouraged 🎨 Default Configuration ATR Period: 14 ATR Multiplier: 2.0 Price Source: Close Base Stop Loss: 20 pips Band Smoothing: 3 periods Standard Deviation: Optional (20 period, 2.0 multiplier) 🚀 Getting Started Add the indicator to your chart Set your base stop loss tolerance in the settings Choose your preferred price source and ATR parameters Enable Standard Deviation for enhanced accuracy (optional) Monitor the information table for real-time risk assessment Use the suggested distances as minimum stop loss levels Pro Tip: In low volatility markets, the bands will contract suggesting tighter stops. In high volatility periods, they expand warning you to use wider stops to avoid being stopped out by normal price action. 📝 Version History & Updates This indicator is actively maintained and updated based on user feedback. Future enhancements may include multi-timeframe analysis, trend-based asymmetric bands, and additional statistical measures. Transform your risk management approach with data-driven stop loss suggestions that adapt to real market conditions!
Indikator Pine Script®
oleh Raffaele_De_Leo
VIM (Volume in Money)Volume in Money + MA (Short Numbers & Coloring) This indicator visualizes the monetary volume traded in each candle, calculated as: Money Volume = Volume × Close Price Money Volume=Volume×Close Price 🔹 Features: Plots bars representing the money volume (total traded value). Coloring options: • Prev Close → Green if the current close is higher than the previous close, Red if lower. • Candle Direction → Green if the candle is bullish (close > open), Red if bearish (close < open). Moving Average (default length: 14) applied on the money volume for trend analysis. Axis values and labels displayed in a shortened format (K, M, B, T) for readability. 📊 This helps traders quickly identify whether large amounts of money flowed into or out of the asset, making it easier to detect unusual activity compared to regular volume indicators.
Indikator Pine Script®
oleh tbtb1111
1
Trading Activity Index (Zeiierman)█ Overview Trading Activity Index (Zeiierman) is a volume-based market activity meter that transforms dollar-volume into a smooth, normalized “activity index.” It highlights when market participation is unusually low or high with a dynamic color gradient: Light Blue → Low Activity (thin participation, low liquidity conditions) Red/Orange → High Activity (active markets, large trades flowing in) Additional percentile bands (20/40/60/80%) give context, helping you see whether the current activity level is in the bottom quintile, mid-range, or near historical extremes. █ How It Works ⚪ Dollar Volume Transformation Each bar, dollar volume is computed: float dlrVol = close * volume float dlrVolAvg = ta.sma(dlrVol, len_form) Dollar volume = price × volume, smoothed by a configurable SMA window. The result is log-transformed, compressing large outliers for a more stable signal. ⚪ Rolling Percentiles & Ranking The log-dollar-volume series is compared to its rolling history (len_hist bars): float p20 = ta.percentile_linear_interpolation(vscale, len_hist, 20) float p40 = ta.percentile_linear_interpolation(vscale, len_hist, 40) float p60 = ta.percentile_linear_interpolation(vscale, len_hist, 60) float p80 = ta.percentile_linear_interpolation(vscale, len_hist, 80) A normalized rank (0–1) is produced to color the main Trading Activity line. █ How to Use ⚪ Detect High-Impact Sessions Quickly see if today’s session is active or quiet relative to its own history — great for filtering setups that need activity. ⚪ Spot Breakouts & Traps Combine with price action: High activity near breakouts = strong follow-through likely. Low activity breakouts = vulnerable to fake-outs. ⚪ Market Regime Context Percentile bands help you assess whether participation is building up, in the middle of the range, or drying out — valuable for timing mean-reversion trades. Above 80th percentile (red/orange) → Market is highly active, breakout trades and trend strategies are favored. Below 20th percentile (light blue) → Market is quiet; fade moves or wait for expansion. Watch transitions from blue → orange as a signal of growing institutional participation. █ Settings Formation Window (bars) – Number of bars used to average dollar volume before log transform. History Window (bars) – Lookback period for percentile calculations and rank normalization. ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Indikator Pine Script®
oleh Zeiierman
4
Sentinel Nexus Dashboard [AGP] Ver.1.5Sentinel Nexus Dashboard is a versatile Pine Script designed as a comprehensive technical analysis tool. It condenses a variety of key indicators and metrics into a single, intuitive visual dashboard, providing an integrated view of market trends, momentum, volatility, and liquidity, all neatly organized on your TradingView chart. Key Features and Benefits All-in-One Dashboard: This script centralizes relevant information, offering a clean, efficient control panel that helps you make quick decisions without cluttering your chart with multiple overlays. Trend Analysis with ADX: It incorporates the Average Directional Index (ADX) to measure trend strength. The dashboard displays ADX, DI+, and DI- values with dynamic color-coding to highlight trend intensity (e.g., blue for a very strong trend). Momentum Analysis with MACD: The dashboard shows MACD line and signal line values in a table. The background color of the MACD values reflects the histogram's direction, allowing you to quickly identify crosses and shifts in market momentum. Multi-Timeframe RSI Analysis: The RSI (Relative Strength Index) dashboard displays values across multiple timeframes (from 1 minute to 1 month). Overbought (77) and oversold (23) levels are color-coded for immediate identification of market conditions, making it an ideal tool for multi-timeframe analysis. Smart and Dynamic Volume: The script uses a bar coloring algorithm based on average volume. Chart bars change color according to volume magnitude (extreme, high, average, or low) relative to the average, distinguishing between bullish and bearish bars. This helps you identify significant, liquidity-driven price movements. Fair Value Analysis: The script calculates an asset's "fair value" using a noise filter (similar to a Kalman filter) on recent highs and lows to determine a midpoint. The price dashboard's background color changes to indicate if the current price is above or below this fair value. Fibonacci EMA Analysis: A table displays several Exponential Moving Averages (EMAs) based on the Fibonacci sequence. The values are color-coded to show whether the current price is above (white) or below (orange) each EMA, helping you quickly identify dynamic support and resistance levels. CME Futures Data Integration: For Bitcoin, the script can show a chart label with the Bitcoin futures price (CME:BTC1!), allowing you to compare the spot price with the CME futures market. Potential Uses and Applications The Sentinel Nexus Dashboard is an excellent support tool for trading. It is not a signal system but rather a suite of confirmation tools that can be used to: Confirm Trend Strength: Before entering a trade, use the ADX data to ensure the trend has enough strength for your expected move. Detect Reversal Points: Multi-timeframe RSI data can alert you to potential overbought or oversold conditions, indicating possible exhaustion of a price move. Validate Price Movements: Bar coloring based on volume helps you determine if a price move is genuine and supported by strong market participation. High volume can confirm a breakout or reversal. Identify Support and Resistance: The Fibonacci EMAs allow you to quickly visualize key levels where price might find support or resistance, aiding in planning entries and exits. In short, this script is perfect for traders who want a comprehensive market overview without chart clutter. It efficiently integrates trend, momentum, and volume analysis in one place. Legal Disclaimer RISK WARNING: This Pine Script is a technical analysis tool and should not be considered financial advice. Past performance of any indicator is no guarantee of future results. Trading in financial markets involves a high risk of loss and is not suitable for all investors. By using this indicator, you accept full responsibility for your trading decisions and acknowledge that any financial loss is your sole responsibility. IMPORTANT: Some script functions, such as the CME price label, may not work correctly if your TradingView subscription plan is not a paid one. Please check your plan's limitations to ensure the indicator's optimal functionality.
Indikator Pine Script®
oleh Andromedae
Volume Delta Oscillator with Divergence█ OVERVIEW The Volume Delta Oscillator with Divergence is a technical indicator designed for the TradingView platform, helping traders identify potential trend reversal points and market momentum shifts through volume delta analysis and divergence detection. The indicator combines a smoothed volume delta oscillator with moving average-based signals, overbought/oversold levels, and divergence visualization, enhanced by configurable gradients and alerts for quick decision-making. █ CONCEPT The core idea of the indicator is to measure net buying or selling pressure through volume delta, smooth it for greater clarity, and detect divergences between price action and the oscillator. The indicator does not use external data, making it a compromise but practical tool for analyzing market dynamics based on available price and volume data. It provides insights into market dynamics, overbought/oversold conditions, and potential reversal points, with an attractive visual presentation. █ WHY USE IT? - Divergence detection: Identifies bullish and bearish divergences between price and the oscillator, signaling potential reversals. - Volume delta analysis: Measures cumulative volume delta to assess buying/selling pressure, expressed as a percentage for cross-market comparability. - Signal generation: Creates buy/sell signals based on overbought/oversold level crossovers, zero line crossovers, and moving average zero line crossovers. - Visual clarity: Uses gradients, fills, and dynamic colors for intuitive chart analysis. - Flexibility: Numerous settings allow adaptation to various markets (e.g., forex, crypto, stocks) and trading strategies. █ HOW IT WORKS? - Volume delta calculation: Computes net buying/selling pressure per candle as volume * (close - open) / (high - low), aggregated over a specified period (Cumulative Delta Length). - Smoothing: Applies an EMA (Smoothing Length) to the cumulative delta percentage, creating a smoother oscillator (Delta Oscillator). - Moving Average: Calculates an SMA (Moving Average Length) of the smoothed delta for trend confirmation (Moving Average (SMA)). - Divergence detection: Identifies bullish and bearish divergences by comparing price and oscillator pivot highs/lows within a specified range (Pivot Length). - Normalization: Delta is expressed as a percentage of total volume, ensuring consistency across instruments and timeframes. - Signals: Generates signals for: Crossing the oversold level upward (buy) or overbought level downward (sell). Crossing the zero line by the oscillator or moving average (buy/sell). Bullish/bearish divergences, marked with labels. - Visualization: Draws the oscillator and moving average with dynamic colors, gradient fills, and transparent bands and labels, with configurable overbought/oversold levels. - Alerts: Built-in alerts for divergence detection, overbought/oversold crossovers, and zero line crossovers (both oscillator and moving average). █ SETTINGS AND CUSTOMIZATION - Cumulative Delta Length: Period for aggregating volume delta (default: 14). - Smoothing Length (EMA): EMA length for smoothing the delta oscillator (default: 2). Higher values smooth the signal but reduce the number of generated signals. - Moving Average Length (SMA): SMA length for the moving average line (default: 40). Higher values allow SMA to be analyzed as a trend indicator, but require adjusting overbought/oversold levels for MA, as longer MA oscillates less. - Pivot Length (Left/Right): Number of candles for detecting pivot highs/lows in divergence calculations (default: 2). Higher values can reduce noise but introduce a delay equal to the set value. - Overbought/Oversold Levels: Thresholds for the oscillator (default: 18/-18) and for the moving average (default: 10/-10). For the moving average, no arrows appear; instead, the band changes color from gray to green (oversold) or red (overbought), which can strengthen entry signals for delta. - Signal Type: Select signals to display: "Overbought/Oversold", "Zero Line", "MA Zero Line", "All", or "None" (default: Overbought/Oversold). - Colors and gradients: Customize colors for bullish/bearish oscillator, moving average, zero line, overbought/oversold levels, and divergence labels. - Transparency: Adjust gradient fill transparency (default: 70) and band/label transparency (default: 40) for consistent appearance. - Visualizations: Enable/disable the moving average, gradients for zero/overbought/oversold levels, and gradient fills. █ USAGE EXAMPLES - Momentum analysis: Observe the delta oscillator above 0 for bullish momentum or below 0 for bearish momentum. The moving average (SMA), being smoothed, reacts more slowly and can confirm trend direction as a noise filter. - Reversal signals: Look for buy triangles when the oscillator crosses the oversold level upward, especially when the moving average is below the MA oversold threshold. Similarly, look for sell triangles when crossing the overbought level downward, with the moving average above the MA overbought threshold. Divergence labels (bullish/bearish) indicate potential reversals. - Divergence trading: Use bullish divergence labels (green) for potential buy opportunities and bearish labels (red) for sell opportunities, especially when confirmed by price action or other indicators. - Customization: Adjust the cumulative delta length, smoothing, and moving average length to specific instruments and timeframes to minimize false signals. █ NOTES FOR USERS - Combine the indicator with other tools, such as Fibonacci levels, RSI, or pivot points, to increase accuracy. - Test different settings for cumulative delta length, smoothing, and moving average length on your chosen instrument and timeframe to find optimal values.
Indikator Pine Script®
oleh Uncle_the_shooter
3
DeltaFlow Volume Profile [BigBeluga]🔵 OVERVIEW The DeltaFlow Volume Profile builds a compact volume profile next to price and enriches every bin with flow context : bullish vs. bearish participation (%), a per-bin Delta % , an optional Delta Heat Map , and a PoC band with the bin’s absolute volume. This lets you see not just where volume clustered, but who (buyers or sellers) dominated inside each price slice. 🔵 CONCEPTS Binned Volume Profile : Price range over a user-defined LookBack is split into Bins ; each bin aggregates traded volume. Bull/Bear Split : Within every bin, volume is separated by candle direction into Bull Volume and Bear Volume , then normalized to % of the bin’s displayed size. Delta % : The difference between Bull % and Bear % for the bin. Positive = buyer dominance; negative = seller dominance. Delta Heat Map : Bin background shading that scales with both total volume strength and delta bias. PoC (Point of Control) : The most significant bin gets a PoC band and a label with its absolute volume. 🔵 FEATURES Profile with Flow : A clean horizontal volume bar per bin plus stacked Bull % and Bear % . Per-Bin Delta Label : A readable “Δ xx%” tag at the start of each bin shows dominance at a glance. Delta Heat Map : Optional gradient that intensifies with higher volume and stronger delta. PoC Highlight : Optional PoC band colored separately, labeled with absolute volume (e.g., “1.23M”). Configurable Inputs : LookBack, number of Bins (10–100), toggles for Delta, Heat Map, Volume Bars, and PoC color. Readable Colors : Separate inputs for bullish (volume +) and bearish (volume –) hues. 🔵 HOW TO USE Set the window : Choose LookBack and Bins to balance detail vs. performance (more bins = finer resolution). Enable “Volume Bars” to display the bull/bear split as two stacked percent bars inside each bin. High Bull % near support → constructive demand. High Bear % near resistance → active supply. Use Δ labels (toggle “Delta”) to quickly spot bins with clear buyer/seller control; combine with price position for confluence. Turn on Delta Heat Map to prioritize areas with both large volume and strong imbalance. Watch the PoC : The PoC band marks the most traded (and often magnet) level; its label shows absolute size for context. Trade ideas : Breakout continuation when Δ stays positive across consecutive upper bins. Reversion risk when price enters a large bearish-Δ cluster below. Manage risk around the PoC; reactions there can be sharp. 🔵 CONCLUSION DeltaFlow Volume Profile upgrades a classic profile with flow intelligence. The bull/bear split, explicit Δ %, heat-weighted backdrop, and PoC volume label make dominant participation and key price shelves obvious. Use it to filter levels, time entries with imbalance, and validate breakouts or fades with objective volume-flow evidence.
Indikator Pine Script®
oleh BigBeluga
12
PSDIGreen Zone → Potential Buy Area Price is near support. Red Zone → Potential Sell Area Price is near resistance. EMA Lines Blue (EMA50) above Orange (EMA200): Trend up → favors buys. Blue below Orange: Trend down → favors sells. How to Use Look at zones and trend. Price near green + trend up → consider long. Price near red + trend down → consider short. NOTE: When in uptrend, only follow green zones. When in down trend only follow red zones.
Indikator Pine Script®
oleh stocks-involio
Pre‑Market Cumulative VolumeDescription: This indicator plots the cumulative trading volume for the pre‑market session on intraday charts. It automatically detects when a bar is part of the extended pre‑market period using TradingView’s built‑in session variables, starts a new running total at the first pre‑market bar of each day, and resets at the beginning of regular trading hours. During regular market hours or the post‑market session, the indicator does not display values. To use this script effectively, ensure extended‑hour data is enabled on the chart, and select an intraday timeframe where pre‑market data is available. The result is a simple yet powerful tool for monitoring cumulative pre‑market activity. How to use Add the script to a chart and make sure you are on an intraday timeframe (e.g., 1‑min, 5‑min). Extended‑hour data must be enabled; otherwise session.ispremarket will always be false. During each pre‑market session, the indicator will reset at the first pre‑market bar and then accumulate the volume of subsequent pre‑market bars. Outside the pre‑market (regular trading hours and post‑market), the plot outputs na, so it does not draw on those bars. Customization (optional) If you want to define your own pre‑market times instead of relying on TradingView’s built‑in session, you can replace the isPreMarket line with a time‑range check. For example, isPreMarket = not na(time(timeframe.period, "0400-0930")) detects bars between 04:00 and 09:30 (U.S. Eastern time). You can parameterize the session string with input.session("0400-0930", "Pre‑Market Session") to let users adjust it.
Indikator Pine Script®
oleh CrazeeTrader
Pre‑Market Cumulative VolumeDescription: This indicator plots the cumulative trading volume for the pre‑market session on intraday charts. It automatically detects when a bar is part of the extended pre‑market period using TradingView’s built‑in session variables, starts a new running total at the first pre‑market bar of each day, and resets at the beginning of regular trading hours. During regular market hours or the post‑market session, the indicator does not display values. To use this script effectively, ensure extended‑hour data is enabled on the chart, and select an intraday timeframe where pre‑market data is available. The result is a simple yet powerful tool for monitoring cumulative pre‑market activity. How to use Add the script to a chart and make sure you are on an intraday timeframe (e.g., 1‑min, 5‑min). Extended‑hour data must be enabled; otherwise session.ispremarket will always be false. During each pre‑market session, the indicator will reset at the first pre‑market bar and then accumulate the volume of subsequent pre‑market bars. Outside the pre‑market (regular trading hours and post‑market), the plot outputs na, so it does not draw on those bars. Customization (optional) If you want to define your own pre‑market times instead of relying on TradingView’s built‑in session, you can replace the isPreMarket line with a time‑range check. For example, isPreMarket = not na(time(timeframe.period, "0400-0930")) detects bars between 04:00 and 09:30 (U.S. Eastern time). You can parameterize the session string with input.session("0400-0930", "Pre‑Market Session") to let users adjust it.
Indikator Pine Script®
oleh CrazeeTrader
Volume Spread Candle█ Overview Volume Spread Candle is a Solid tool for VSA (Volume Spread Analysis). █ Setting please put on VSCandle above the candle chart. █ Features Candle color reflect volume size. Back ground color reflect Spread size. Warning Volume is relatively large volume compared to the Volume flow (up volume MA - down volume MA). Yellow square mark appears when Warning volume. Volume Density is Volume / Spread. Yellow circle mark appears when large Volume Density. █ Usage Abnormal Volume and Spread hint what about to happen.
Indikator Pine Script®
oleh akutsusho
1
Multipower Entry SecretMultipower Entry Secret indicator is designed to be the ultimate trading companion for traders of all skill levels—especially those who struggle with decision-making due to unclear or overwhelming signals. Unlike conventional trading systems cluttered with too many lines and confusing alerts, this indicator provides a clear, adaptive, and actionable guide for market entries and exits. Key Points: Clear Buy/Sell/Wait Signals: The script dynamically analyzes price action, candle patterns, volume, trend strength, and higher time frame context. This means it gives you “Buy,” “Sell,” or “Wait” signals based on real, meaningful market information—filtering out the noise and weak trades. Multi-Timeframe Adaptive Analysis: It synchronizes signals between higher and current timeframes, ensuring you get the most reliable direction—reducing the risk of getting caught in fake moves or sudden reversals. Automatic Support, Resistance & Liquidity Zones: Key levels like support, resistance, and liquidity zones are auto-detected and displayed directly on the chart, helping you make precise decisions without manual drawing. Real-Time Dashboard: All relevant information, such as trend strength, market intent, volume sentiment, and the reason behind each signal, is neatly summarized in a dashboard—making monitoring effortless and intuitive. Customizable & Beginner-Friendly: Whether you’re a newcomer wanting straightforward guidance or a professional needing advanced customization, the indicator offers flexible options to adjust analysis depth, timeframes, sensitivity, and more. Visual & Clutter-Free: The design ensures that your chart remains clean and readable, showing only the most important information. This minimizes mental overload and allows for instant decision-making. Who Will Benefit? Beginners who want to learn trading logic, avoid common traps, and see the exact reason behind every signal. Advanced traders who require adaptive multi-timeframe analytics, fast execution, and stress-free monitoring. Anyone who wants to save screen time, reduce analysis paralysis, and have more confidence in every trade they take. 1. No Indicator Clutter Intent: Many traders get confused by charts filled with too many indicators and signals. This often leads to hesitation, missed trades, or taking random, risky trades. In this Indicator: You get a clean and clutter-free chart. Only the most important buy/sell/wait signals and relevant support/resistance/liquidity levels are shown. These update automatically, removing the “overload” and keeping your focus sharp, so your decision-making is faster and stress-free. 2. Exact Entry Guide Intent: Traders often struggle with entry timing, leading to FOMO (fear of missing out) or getting trapped in sudden market reversals. In this Indicator: The system uses powerful adaptive logic to filter out weak signals and only highlight the strongest market moves. This not only prevents you from entering late or on noise, but also helps avoid losses from false breakouts or whipsaws. You get actionable suggestions—when to enter, when to hold back—so your entries are high-conviction and disciplined. 3. HTF+LTF Logic: Multitimeframe Sync Analysis Intent: Most losing trades happen when you act only on the short-term chart, ignoring the bigger market trend. In this Indicator: Signals are based on both the current chart timeframe (LTF) and a higher (HTF, like hourly/daily) timeframe. The indicator synchronizes trend direction, momentum, and structure across both levels, quickly adapting to show you when both are aligned. This filtering results in “only trade with the bigger trend”—dramatically increasing your win rate and market confidence. 4. Auto Support/Resistance & Liquidity Zones Intent: Drawing support/resistance and liquidity zones manually is time-consuming and error-prone, especially for beginners. In this Indicator: The system automatically identifies and plots the most crucial support/resistance levels and liquidity zones on your chart. This is based on adaptive, real-time price and volume analysis. These zones highlight where major institutional activity, trap setups, or real breakouts/reversals are most likely, removing guesswork and giving you a clear reference for entries, exits, and stop placements. 5. Clear Action/Direction Intent: Traders need certainty—what does the market want right now? Most indicators are vague. In this Indicator: Your dashboard always displays in plain words (like “BUY”, “SELL”, or “WAIT”) what action makes sense in the current market phase. Whether it’s a bull trap, volume spike, wick reversal, or exhaustion—it’s interpreted and explained clearly. No more confusion—just direct, real-time advice. 6. For Everyone (Beginner to Pro) Intent: Most advanced indicators are overwhelming for new traders; simple ones lack depth for professionals. In this Indicator: It is simple enough for a beginner—just add it to the chart and instantly see what action to consider. At the same time, it includes advanced adaptive analysis, multi-timeframe logic, and customizable settings so professional traders can fine-tune it for their strategies. 7. Ideal Usage and User Benefits Instant Decision Support: Whenever you’re unsure about a trade, just look at the indicator’s suggestion for clarity. Entry Learning: Beginners get real-time “practice” by not only seeing signals, but also the reason behind them—improving your chart reading and market understanding. Screen Time & Stress Reduction: Clear, relevant information only; no noise, less fatigue, faster decisions. Makes Trading Confident & Simple: The smart dashboard splits actionable levels (HTF, LTF, action) so you never miss a move, avoid traps, and stay aligned with high-probability trades. 8. Advanced Input Settings (Smart Customization) Explained with Examples: Enable Wick Analysis: Finds candles with strong upper/lower wicks (signs of rejection/buying/selling force), alerting you to hidden reversals and protecting from FOMO entries. Enable Absorption: Detects when heavy order flow from one side is “absorbed” by the other (shows where institutional buyers/sellers are likely active, helps spot fake breakouts). Enable Unusual Breakout: Highlights real breakouts—large volatility plus high volume—so you catch genuine moves and avoid random spikes. Enable Range/Expansion: Smartly flags sudden range expansions—when the market goes from quiet to volatile—so you can act at the start of real trends. Trend Bar Lookback: Adjusts how many bars/candles are used in trend calculations. Short (fast trades, more signals), long (more reliability, fewer whipsaws). Bull/Bear Bars for Strong Trend Min: Sets how many candles in a row must support a trend before calling it “strong”—prevents flipping signals, keeps you disciplined. Volume MA Length: Lets you adjust how many bars back volume is averaged—fine-tune for your asset and trading style for best volume signals. Swing Lookback Bars: Set how many bars to use for swing high/low detection—short (quick swing levels), long (stronger support/resistance). HTF (Bias Window): Decide which higher timeframe the indicator should use for big-picture market mood. Adjustable for any style (scalp, swing, position). Adaptive Lookback (HTF): Choose how much HTF history is used for detecting major extremes/zones. Quick adjust for more/less sensitivity. Show Support/Resistance, Liquidity Zones, Trendlines: Toggle them on/off instantly per your needs—keeps your chart relevant and tailored. 9. Live Dashboard Sections Explained Intent HTF: Shows if the bigger timeframe currently has a Bullish, Bearish, or Neutral (“Chop”) intent, based on strict volume/price body calculations. Instant clarity—no more guessing on trend bias. HTF Bias: Clear message about which side (buy/sell/sideways) controls the market on the higher timeframe, so you always trade with the “big money.” Chart Action: The central action for the current bar—Whether to Buy, Sell, or Wait—calculated from all indicator logic, not just one rule. TrendScore Long/Short: See how many candles in your chosen window were bullish or bearish, at a glance. Instantly gauge market momentum. Reason (WHY): Every time a signal appears, the “reason” cell tells you the primary logic (breakout, wick, strong trend, etc.) behind it. Full transparency and learning—never trade blindly. Strong Trend: Shows if the market is currently in a powerful trend or not—helping you avoid choppy, risky entries. HTF Vol/Body: Displays current higher timeframe volume and candle body %—helping spot when big players are active for higher probability trades. Volume Sentiment: A real-time analysis of market psychology (strong bullish/bearish, neutral)—making your decision-making much more confident. 10. Smart and User-Friendly Design Multi-timeframe Adaptive: All calculations can now be drawn from your choice of higher or current timeframe, ensuring signals are filtered by larger market context. Flexible Table Position: You can set the live dashboard/summary anywhere on the chart for best visibility. Refined Zone Visualization: Liquidity and order blocks are visually highlighted, auto-tuning for your settings and always cleaning up to stay clutter-free. Multi-Lingual & Beginner Accessible: With Hindi and simple English support, descriptions and settings are accessible for a wide audience—anyone can start using powerful trading logic with zero language barrier. Efficient Labels & Clear Reasoning: Signal labels and reasons are shown/removed dynamically so your chart stays informative, not messy. Every detail of this indicator is designed to make trading both simpler and smarter—helping you avoid the common pitfalls, learn real price action, stay in sync with the market’s true mood, and act with discipline for higher consistency and confidence. This indicator makes professional-grade market analysis accessible to everyone. It’s your trusted assistant for making smarter, faster, and more profitable trading decisions—providing not just signals, but also the “why” behind every action. With auto-adaptive logic, clear visuals, and strong focus on real trading needs, it lets you focus on capturing the moves that matter—every single time.
Indikator Pine Script®
oleh cnagda3
3