ADX + DI x Upgraded to Pine v4 x KingThiesAverage Directional Movement Index
Momentum based tool to measure trend strength on scale of 1-100
Similar to the aroon but incorporates a 3rd measure, while aroon uses two
The majority of these calculations were pre-existing in older pine scripts but have since been updated
signals are given when -DI and +DI cross, ADX illustrates corresponding strength at time of cross
Full Intro
ADX can help investors to identify trend strengths, as di - di determines the trend direction, while d - d is an impulse indicator. If the ADX is below 20, it can be considered impulsive, while it is above 25 on a trend line.
A trading signal can be generated when the di - DI line is switched to d - d and vice versa. If the di-line crosses and the ADX is above 20 (ideally 25), a potential buy signal could ebb away.
If the ADX is above 20, there is the possibility of potential short selling if the DI crosses over DI. You can also use crosses to get out of the current deal if you need it for a long time.
If the di-line is crossed and the Adx is below 20 (or 25), there may be opportunities to enter the potential for short trading, but only if di are above or below DI or if the price is trendy and may not prove to be the ideal time to start trading.
Cari skrip untuk "黄金近20年走势"
Weeknights Donchian CloudDonchian Channel Trading system visualised as a cloud.
Regular/Quick inputs;
Length: 20
Entry Length: 20
Stop Length: 10
Alternate/Slower Inputs;
Length: 55
Entry Length: 55
Stop Length: 20
For a more in-depth review, look up "Turtle Trading" rules
The simplest way to use the cloud;
-When the cloud flips from above to below (support), close any shorts and open a long
-When the cloud flips from below to above (resistance), close any longs and open a short
-Cloud is flipped based on a breakout on the high / low
-Most effectively used on the daily, but can be used on any time frame
-For traditional markets, an input of 20 is most commonly used
-For 24/7 markets, an input of 28 is most commonly used
-Find an input that makes the most sense to you!
I appreciate any feedback, feel free to message me on twitter / comment!
Twitter ; @ImWeeknight
Credit to user KivancOzbilgic for helping with the script
Trend QualityThe quality of the current trend is calculated by adding or subtracting
one point to the total value depending on the following criteras:
1. EMA-8, MA-20, MA-50, MA-100, MA-200 , each get a point if they are increasing.
2. EMA-8 > MA-20 > MA-20 > MA-50 > MA-100 > MA-200 , each condition that is true gets one point.
On top of the Trend Quality value we apply a "weekly" (5 periods) and
a "monthly" (22 periods) moving average.
When above a value of 5, a strong trend is indicated and hence
a trend following strategy should be used.
Use this to Buy when bouncing back from e.g MA-20 or a confirming
consolidation/candlestick/trendline pattern.
When the trend decreases below Zero a trend shift may have occured.
Idea, curtesy: Tobbe Rosèn
Simple Moving Average Double HelixThis one is a mix of colour-coded moving averages and Ichimoku. It features two pairs of SMAs--default values of 9/20 and 50/200. Each SMA will be green when it rises and red when it falls. The spaces between each pair will fill with green or red depending on which line is on top. 9 over 20 or 50 over 200 makes a green cloud; if 9 or 50 falls below, the cloud will switch to green.
There's also the Ichimoku lagging span and a 35-period SMA (grey) that can be used as a trailing stop loss guideline.
Ideal long setup:
9, 20, 50, and 200 SMA are all green
both clouds are green
lagging span is above historic price action
Ideal short setup:
9, 20, 50, and 200 SMA are all red
both clouds are red
lagging span is below historic price action
TA Basics: further "Steps" with our Moving AverageSo far in this series of posts, we have worked thru creating a basic zero-lag moving average, then moved forward all the way to coding a "Fibonacci" Weighted Moving Average.
in this post we take a look at a technique that can help traders minimize noise in the underlying data and get better insight on the changes that are happening in the data series represented by the moving average. we'll look at adding "stepping" to our Fibonacci Moving Average as an example. we introduce the Stepping Fibonacci Moving Average , or Step_FiMA
note that you can use the same technique with any plot you may have. feel free to copy or leverage the relevant parts of the script - the script is commented to make this easier.
How is this useful?
==================
with "stepping", you get your indicator to "round" the outcome into pre-specified bands or ranges. this works very similar to how, for example, range or Renko charts work. you can easily see the difference in the chart above once we look at a non-stepped and a stepping moving average of the same length side-by-side
the more granular your timeframe is, you will see the effect of the stepping clearer - here's how the same chart looks when we go into the 1-hr aggregation
Notes about this script
====================
there are couple of pieces i wanted to highlight in the script if you plan to use some of it :
1 - the step(x) function is meant to try to automatically pick the best "suitable" step size based on the range of the underlying series (for example, the closing price). these ranges i included here in the code are just my own "best choices" - you are totally welcome to adjust these ranges and the resulting step size to your own preference
2 - we applied the stepping as a user-choice. user can choose a manual entry, or "0" to get the code to automatically pick the step size, or enter -1 (or actually any value below zero) to cancel the stepping option altogether - this gives us some flexibility on how to use the stepping in an indicator
3 - very important (and somehow confusing): on the "rounding" approach:
the magic math formula that actually creates the stepping is this one
result = round(input / step) * step
now, this tells the script to "round" the result up or down (the basic rounding) -- so for example, a price of 17 with a step of 5 would be rounded (down) to 15, where as a price of 18 would be rounded "up" to 20 -- this is not the way some of us would expect or want, cause the price never reached 20 and they would want an 18 to still be rounded to 15 - and the stepping line not to show 20 *until* the price actually hits or exceeds 20 -- in that case, you would need to replace the function "round" with the function "floor" --
so the new formula becomes: floor(input / step) * step
-- in an ideal world, we can make this rounding choice a user-option in the settings -- maybe in an improved version
4 - we kept the smoothing option, and it takes place before the stepping is applied - we continue to use that smoothing to further minimize the level changes in the FiMA line.
I hope you find this script useful in your journey with technical analysis and DIY scripting, and good luck in your trading.
BTC and ETH Long strategy - version 1I will start with a small introduction about myself. I'm now trading cryto currencies manually for almost 2 years. I decided to start after watching a documentary on the TV showing people who made big money during the Bitcoin pump which happened at the end of 2017.
The next day, I asked myself "Why should I not give it a try and learn how to trade".
This was in February 2018 and the price of Bitcoin was around 11500USD.
I didn't know how to trade. In fact, I didn't know the trading industry at all.
So, my first step into trading was to open an account with a broken. Then I directly bought 200$ worst of BTC . At that time, I saw the graph and thought "This can only go back in the upward direction!" :)
I didn't know anything about Stop loss, Take profit and Risk management.
Today, almost 2 years after, I think that I know how to trade and can also confirm that I still hold this bag of 200$ of bitcoin from 2018 :)
I did spend the 2 last years to learn technical analysis , risk management and leverage trading.
Today (14/05/2020), I know what I'm doing and I'm happy to see that the 2 last years have been positive in terms of gains. Of course, I did not make crazy money with my saving but at least I made more than if I would have kept it in my bank account.
Even if I like trading, I have a full time job which requires my full energy and lots of focus, so, the biggest problem I had is that I didn't have enough time to look at the charts.
Also, I realized that sometimes, neither technical analysis , nor fundamentals worked with crypto currency (at least for short time trading). So, as I have a developer background I decided to try to have a look at algo trading.
The goal for me was neither to make complex algos nor to beat the market but just to automate my trading with simple bot catching the big waves.
I then started to take a look at TV pine script and played with it.
I did my first LONG script in February 2020 to Long the BTC Market. It has some limitations but works well enough for me for the time being. Even if the real trades will bring me half of what the back testing shows, this will still be a lot more than what I was used to win during the last 2 years with my manual trading.
So, here we are! Below you will find some details about my first LONG script. I'm happy to share it with you.
Feel free to play with it, give your comments and bring improvements to it.
But please note that it only works fine with the candle size and crypto pair that I have mentioned below. If you use other settings this algo might loose money!
- Crypto pairs : XBTUSD and ETHXBT
- Candle size: 2 Hours
- Indicator used: Volatility , MACD (12, 26, 7), SMA (100), SMA (200), EMA (20)
- Default StopLoss: -1.5%
- Entry in position if: Volatility < 2%
AND MACD moving up
AND AME (20) moving up
AND SMA (100) moving up
AND SMA (200) moving up
AND EMA (20) > SAM (100)
AND SMA (100) > SMA (200)
- Exit the postion if: Stoploss is reached
OR EMA (20) crossUnder SMA (100)
Here is a summary of the results for this script:
XBTUSD : 01/01/2019 --> 14/05/2020 = +107%
ETHXBT : 01/01/2019 --> 14/05/2020 = +39%
ETHUSD : 01/01/2019 --> 14/05/2020 = +112%
It is far away from being perfect. There are still plenty of things which can be done to improve it but I just wanted to share it :) .
Enjoy playing with it....
BO - Bar M15 2/3 SignalBO - Bar M15 2/3 Signal show the signal to trade Binary Option with rule below:
A. Indicator
* Bollinger Band (20,2): avoid waterfall
B. Rule of Signal
1. Rule1: Split Bar M15 to 3 part and load them on M5 chart (recommend use M5 IDC chart)
2. Rule 2: Delay 10' after bar M15 open => wait for price's pattern
3. Rule 3: Put Signal row 30-32
* Delay 10' after bar M15 open.
* Direction of 1/3 and 2/3 Bar M15 is upward
* close of 2/3 Bar M15 below upper band Bb(20,2) on M5 chart => avoid strong buy
4. Rule 4: Call Signal row 36-38
* Delay 10' after bar M15 open.
* Direction of 1/3 and 2/3 Bar M15 is downward
* close of 2/3 Bar M15 above lower band Bb(20,2) on M5 chart => avoid strong sell
C. Recommend Expiry time: Bar M15 close
* We try to catch the shadow of Bar M15 but dont trade when price run on the upper or lower band of BB(20,2,M5)
Average Candle Length 2.0This script will tell you the following:
• Average length of all the candles (wick to wick) for the last 20 candles
-- shown in blue
• Average length of bull (green) candles (wick to wick) for the last 20 candles
-- shown in green
• Average length of bear (red) candles (wick to wick) for the last 20 candles
-- shown in red
___________________________________________
Inputs:
• # of Candles to analyze (default = 20)
Pivot trend indicatorThis is a LAGGING indicator which can provide a good indication of trend. It require a certain (configurable) number of candles to have closed before it can determine whether a pivot has formed.
It provides a 20 period SMA for the timeframe of your choice which is color coded to show the trend according to confirmed pivots.
Anticipated usage:
Long / Short bias is determined by pivot trend
Trader seeks entries according to their strategy
Black consolidation areas may trigger a re-evaluation of the trade and can serve as good profit taking areas
The SMA colors:
Green -> Higher highs & Higher lows
Red -> Lower highs & Lowers lows
Black -> No clear trend from the pivots
Why the 20 SMA?
Feel free to adjust it for your purposes. I personally find that using a higher time frame 20 SMA is a better indication of trend than longer period MAs on shorter time frames. This can be seen from comparing the 20 daily SMA and 200 hourly SMA.
Pivot adjustment
The pivots use the selected time frame (not) the MA trend time frame. You can specify the left and right candles required to confirm a pivot
VIX reversion-Buschi
English:
A significant intraday reversion (commonly used: 3 points) on a high (over 20 points) S&P 500 Volatility Index (VIX) can be a sign of a market bottom, because there is the assumption that some of the "big guys" liquidated their options / insurances because the worst is over.
This indicator shows these reversions (3 points as default) when the VIX was over 20 points. The character "R" is then shown directly over the daily column, the VIX need not to be loaded explicitly.
Deutsch:
Eine deutliche Intraday-Umkehr (3 Punkte im Normalfall) bei einem hohen (über 20 Punkte) S&P 500 Volatility Index (VIX) kann ein Zeichen für eine Bodenbildung im Markt sein, weil möglicherweise einige "große Jungs" ihre Optionen / Versicherungen auflösen, weil das schlimmste vorbei ist.
Dieser Indikator zeigt diese Umkehr (Standardwert: 3 Punkte), wenn der VIX vorher über 20 Punkte lag. Der Buchstabe "R" wird dabei direkt über dem Tagesbalken angezeigt, wobei der VIX nicht explizit geladen werden muss.
Triple Moving Average HeatmapHi everyone
I didn't publish on Friday because I was working on an Expert Advisor in MT4. The day I don't publish, some scripts spamming guys published many (not useful) scripts the same to kick me out of the TOP #1 ranking.
So what I'm going to do about it? crying or sharing more quality scripts than before? :)
I guess you know the answer :) I'm gonna share a few quality scripts that I have in my library. I noticed that you guys tend to like more the scripts useful for your trading actually making you money rather than a copy-paste (of another copy-paste)
Alright, enough for the trolling now let's introduce the Three MA heatmap which is an upgrade of that script : MA-heatmap-Double-cross-edition/
The challenge was to keep the heatmap not rolling and to make it match with the MA cross. I did it using this
```
since_ma_buy = barssince(macrossover)
since_ma_sell = barssince(macrossunder)
heatmap_color() =>
since_ma_buy < since_ma_sell ? color.new(color.green, 20) : since_ma_buy > since_ma_sell ? color.new(color.red, 20) : na
```
This is a technique that I found after drinking three glasses of red wine (#french) to keep the heatmap stable and not rolling.
To get what I'm saying I invite you to replace the piece of code above by what everyone would normally do
```
heatmap_color() =>
macrossunder() ? color.new(color.green, 20) : macrossover() ? color.new(color.red, 20) : na
```
Ah and I'm not done sharing for the day, a few scripts are coming also after that one and tonight !!!!! I want to live in a world where you guys can enjoy quality scripts (mostly) :)
PS
____________________________________________________________
Feel free to hit the thumbs up as it shows me that I'm not doing this for nothing and will motivate to deliver more quality content in the future.
- I'm an officially approved PineEditor/LUA/MT4 approved mentor on codementor. You can request a coaching with me if you want and I'll teach you how to build kick-ass indicators and strategies
Jump on a 1 to 1 coaching with me
- You can also hire for a custom dev of your indicator/strategy/bot/chrome extension/python
Palex 2.0Atualização do SETUP do saudoso Professor Alexandre Fernandes "Palex"
- Bandas de Bolliger (Standard) =
*Banda Superior = Média Móvel Simples (20 dias) + (2 x Desvio Padrão de 20 dias)
*Banda Inferior = Média Móvel Simples (20 dias) – (2 x Desvio Padrão de 20 dias)
- EMA 9 (Média Móvel Exponencial)
- SMA 21 (Média Móvel Simples)
- SMA 200 (Média Móvel Simples) Clássica MA 200 períodos
- SMA 400 (Média Móvel Simples)
- EMA 400 (Média Móvel Exponencial)
- WILD (Média Móvel Welles Wilder)
O mesmo usado pelo nosso grande Mestre PALEX!
The 6 Line Death PunchIf you are looking to discover what trend you are in, you need to first what direction the price is going in...
I've been using and testing a mixture of EMA's and SMA's for a long time and I've found that these ones are by far the best.
EMA 3
EMA 8
MA 20
EMA 55
MA 100
MA 200
EMA 3 & 8 Crossover is a good method for confirming a coin going to the upside or to the downside.
EMA 8 is known as the Trigger Line (trademarked brand) as one of the fib numbers it shows good support or resistance of a trend.
MA 20 universal way of seeing trend direction in the stock market, works well with crypto too.
EMA 55, another trusty fib number. Works very well and could trade off that alone as support and resistance.
MA 100 and MA 200. Long ranged moving averages which govern the overall longer-term trend.
LONG ENTRY
Option 1 - 3/8 crossover
Option 2 - Candles above EMA 8
Option 3 - Candles above MA 20
Option 4 - Candles Above EMA 55.
SHORT ENTRY
Option 1 - 3/8 crossover
Option 2 - Candles below EMA 8
Option 3 - Candles below MA 20
Option 4 - Candles below EMA 55.
Signals for call and putSorry for the Google Translate English
Indicator for signals of call and put, using Bollinger bands (period 20, standard deviation 2.5), market trend of (sma, períod 100) and stochastic (period 20, %D 3).
I was overthrown but in pine scrip, the function "stoch()" no way to smooth (3). If anyone knows how to smooth inside the script, help me! Please.
With smoothed stochastic the hit rate grows a lot.
Português (Pt-Br)
Indicador de sinais de compra e venda, usando bandas de Bollinger (período de 20, desvio de 2,5), tendencia de mercado com (sma período 100) e estocástico (período 20, %D de 3).
Eu travei porque no pine script, a função "stoch()" não tem como aplicar a suavização (3). Se alguem souber como suavizar dentro do script, me ajude! Por favor.
MG - Multiple Moving Averages & Candle Wick Alerts - 1.0Features:
- Each moving average has customizable length, type and source
- The ability to change the source of all moving averages with one input (changing an individual MA source will override the general for that MA)
- At a glance comparison of 20 SMA and 20 VWMA to gauge volume trend
- Wick alerts which can be toggled for each moving average.
- Bullish wick alerts are when the wick is the only part of the candle to drop below the moving average
- Bearish wick alerts are when the wick is the only part of the candle to reach above the moving average
- Simple candle closed alert if you want a notification, for example each hour.
Defaults: Four SMAs (20, 50, 100, 200) and a 20 VWMA .
Recommended Usage:
- Set the general source (sets the source of all moving averages) to 'low' when in an uptrend and 'high' in a downtrend to maximize Risk : Reward.
- Use Fibonacci levels, oscillators .etc for confluence
NOTE: The moving average component of this indicator is the same as the previous indicator ()
Indicator - Multiple Moving Averages 1.0Features:
- Each moving average has customizable length, type and source
- The ability to change the source of all moving averages with one input (changing an individual MA source will override the general for that MA)
- At a glance comparison of 20 SMA and 20 VWMA to gauge volume trend
Defaults: Four SMAs (20, 50, 100, 200) and a 20 VWMA.
Usage:
- Use Fibonacci levels, pivots .etc for confluence
- Personally, I like to set overall source to low in uptrends, to high in downtrends and then set alerts for when the price crosses any of the averages. Then pay particular attention to the candlesticks and other indicators.
TODO:
- Add alerts option so that it send alert on crossing up or down any alert lines.
XPloRR MA-Trailing-Stop StrategyXPloRR MA-Trailing-Stop Strategy
Long term MA-Trailing-Stop strategy with Adjustable Signal Strength to beat Buy&Hold strategy
None of the strategies that I tested can beat the long term Buy&Hold strategy. That's the reason why I wrote this strategy.
Purpose: beat Buy&Hold strategy with around 10 trades. 100% capitalize sold trade into new trade.
My buy strategy is triggered by the fast buy EMA (blue) crossing over the slow buy SMA curve (orange) and the fast buy EMA has a certain up strength.
My sell strategy is triggered by either one of these conditions:
the EMA(6) of the close value is crossing under the trailing stop value (green) or
the fast sell EMA (navy) is crossing under the slow sell SMA curve (red) and the fast sell EMA has a certain down strength.
The trailing stop value (green) is set to a multiple of the ATR(15) value.
ATR(15) is the SMA(15) value of the difference between the high and low values.
The scripts shows a lot of graphical information:
The close value is shown in light-green. When the close value is lower then the buy value, the close value is shown in light-red. This way it is possible to evaluate the virtual losses during the trade.
the trailing stop value is shown in dark-green. When the sell value is lower then the buy value, the last color of the trade will be red (best viewed when zoomed)(in the example, there are 2 trades that end in gain and 2 in loss (red line at end))
the EMA and SMA values for both buy and sell signals are shown as a line
the buy and sell(close) signals are labeled in blue
How to use this strategy?
Every stock has it's own "DNA", so first thing to do is tune the right parameters to get the best strategy values voor EMA , SMA, Strength for both buy and sell and the Trailing Stop (#ATR).
Look in the strategy tester overview to optimize the values Percent Profitable and Net Profit (using the strategy settings icon, you can increase/decrease the parameters)
Then keep using these parameters for future buy/sell signals only for that particular stock.
Do the same for other stocks.
Important : optimizing these parameters is no guarantee for future winning trades!
Here are the parameters:
Fast EMA Buy: buy trigger when Fast EMA Buy crosses over the Slow SMA Buy value (use values between 10-20)
Slow SMA Buy: buy trigger when Fast EMA Buy crosses over the Slow SMA Buy value (use values between 30-100)
Minimum Buy Strength: minimum upward trend value of the Fast SMA Buy value (directional coefficient)(use values between 0-120)
Fast EMA Sell: sell trigger when Fast EMA Sell crosses under the Slow SMA Sell value (use values between 10-20)
Slow SMA Sell: sell trigger when Fast EMA Sell crosses under the Slow SMA Sell value (use values between 30-100)
Minimum Sell Strength: minimum downward trend value of the Fast SMA Sell value (directional coefficient)(use values between 0-120)
Trailing Stop (#ATR): the trailing stop value as a multiple of the ATR(15) value (use values between 2-20)
Example parameters for different stocks (Start capital: 1000, Order=100% of equity, Period 1/1/2005 to now) compared to the Buy&Hold Strategy(=do nothing):
BEKB(Bekaert): EMA-Buy=12, SMA-Buy=44, Strength-Buy=65, EMA-Sell=12, SMA-Sell=55, Strength-Sell=120, Stop#ATR=20
NetProfit: 996%, #Trades: 6, %Profitable: 83%, Buy&HoldProfit: 78%
BAR(Barco): EMA-Buy=16, SMA-Buy=80, Strength-Buy=44, EMA-Sell=12, SMA-Sell=45, Strength-Sell=82, Stop#ATR=9
NetProfit: 385%, #Trades: 7, %Profitable: 71%, Buy&HoldProfit: 55%
AAPL(Apple): EMA-Buy=12, SMA-Buy=45, Strength-Buy=40, EMA-Sell=19, SMA-Sell=45, Strength-Sell=106, Stop#ATR=8
NetProfit: 6900%, #Trades: 7, %Profitable: 71%, Buy&HoldProfit: 2938%
TNET(Telenet): EMA-Buy=12, SMA-Buy=45, Strength-Buy=27, EMA-Sell=19, SMA-Sell=45, Strength-Sell=70, Stop#ATR=14
NetProfit: 129%, #Trade
EMA Indicators with BUY sell SignalCombine 3 EMA indicators into 1. Buy and Sell signal is based on
- Buy signal based on 20 Days Highest High resistance
- Sell signal based on 10 Days Lowest Low support
Input :-
1 - Short EMA (20), Mid EMA (50) and Long EMA (200)
2 - Resistance (20) = 20 Days Highest High line
3 - Support (10) = 10 Days Lowest Low line
Complete DashboardPA+AI PRE/GO Trading Dashboard v0.1.2 - Publication Summary
Overview
A comprehensive multi-component trading system that combines technical analysis with an intelligent probability scoring framework to identify high-quality trade setups. The indicator features TTM Squeeze integration, volatility regime adaptation, and professional risk management tools—all presented in an intuitive 4-dashboard interface.
Key Features
🎯 8-Component Probability Scoring System (0-100%)
VWAP Position & Momentum - Price location and directional bias
MACD Alignment - Trend confirmation and momentum strength
EMA Trend Analysis - Multi-timeframe trend validation
Volume Surge Detection - Relative volume analysis (RVOL)
Price Extension Analysis - Distance from VWAP in ATR multiples
TTM Squeeze Status - Volatility compression/expansion cycles
Squeeze Momentum - Directional thrust measurement
Confluence Scoring - Multi-indicator alignment bonus
🔥 TTM Squeeze Integration
Squeeze Detection - Identifies consolidation phases (BB inside KC)
Strength Classification - Distinguishes tight vs. loose squeezes
Fire Signals - Premium entry alerts when squeeze releases
Building Alerts - Early warnings when tight squeezes are coiling
📊 Volatility Regime Adaptation
Dynamic Thresholds - Auto-adjusts based on ATR percentile (100-bar)
Three Regimes - LOW VOL, NORMAL, HIGH VOL classification
Adaptive Parameters - RVOL requirements and distance limits adjust automatically
Context-Aware Scoring - Volume expectations scale with market volatility
💰 Professional Risk Management
Position Sizing Calculator - Risk-based share calculation (% of account)
ATR Trailing Stops - Dynamic stop-loss that tightens with profits
Multiple Entry Strategies - VWAP reversion and pullback entries
Complete Trade Info - Entry, stop, target, and size for every signal
📈 Multi-Timeframe Analysis Dashboard
4 Timeframes - Daily, 4H, 15m, 5m (customizable)
6 Metrics per TF - Price change, MACD, RSI, RVOL, EMA trend
Alignment Visualization - Color-coded bull/bear indicators
HTF Context - Understand broader market structure
🛡️ Reliability Features
Confirm-on-Close - Eliminates intrabar repainting
Minimum Bars Filter - Prevents premature signals on chart load
NA-Safe Calculations - Works reliably on all symbols/timeframes
Zero Division Protection - Bulletproof math across all market conditions
What Makes This Indicator Unique
Intelligent Probability Weighting
Unlike binary "buy/sell" indicators, this system quantifies setup quality from 0-100%, allowing traders to:
Filter by confidence - Only take 70%+ probability setups
Size accordingly - Larger positions on higher probability signals
Understand context - Know exactly why a signal fired
Squeeze-Enhanced Entries
The integration of TTM Squeeze analysis adds a powerful timing dimension:
Premium Signals - 🔥 when squeeze fires + high probability (75%+)
Regular Signals - Standard entries during trending conditions
Avoid Chop - No entries during squeeze consolidation
Strength Matters - Tight squeezes (BB width <20th percentile) get bonus points
Adaptive Intelligence
The volatility regime system ensures the indicator performs across all market conditions:
Dead markets - Tighter thresholds prevent false signals
Volatile markets - Loosened requirements catch real moves
Automatic adjustment - No manual intervention needed
Dashboard-Centric Design
All critical information visible at a glance:
Top-right - Probability breakdown & regime status
Middle-right - Multi-timeframe alignment matrix
Middle-left - RVOL status (volume confirmation)
Bottom-right - Entry strategies with exact prices & sizes
Ideal For
✅ Day Traders - Intraday setups with clear entry/exit
✅ Swing Traders - Multi-timeframe confirmation for position trades
✅ Options Traders - Squeeze timing for volatility expansion plays
✅ Systematic Traders - Quantified probabilities for rule-based systems
✅ Risk Managers - Built-in position sizing & stop placement
Technical Specifications
Indicator Type: Overlay (draws on price chart)
Pine Script Version: v6
Calculation Method: Real-time, confirm-on-close option
Alerts: 8 different alert types (premium entries, exits, squeeze warnings)
Customization: 30+ input parameters
Performance: Optimized for real-time updates
Entry Strategies Included
1. VWAP Reversion
Enter when price bounces off VWAP ± 0.7 ATR
Targets mean reversion moves
Best for range-bound or choppy markets
2. Pullback to Structure
Enter on 50% retracement from swing high/low
Targets trend continuation after healthy pullback
Best for strong trending markets
Both strategies include:
Precise entry levels
ATR-based stop placement
Risk/reward targets
Position size calculation
Alert System
8 Alert Types:
🔥 Premium Long - Squeeze firing + bullish + high probability
🔥 Premium Short - Squeeze firing + bearish + high probability
🟢 High Probability Long - Standard bullish setup (70%+)
🔴 High Probability Short - Standard bearish setup (70%+)
⚡ Squeeze Coiling Long - Tight squeeze building, bullish bias
⚡ Squeeze Coiling Short - Tight squeeze building, bearish bias
Exit Long - Long position exit signal
Exit Short - Short position exit signal
Settings & Customization
Basic Settings
ATR Length (default: 14)
Confirm on Close (default: ON)
Minimum Bars Required (default: 50)
Squeeze Settings
Bollinger Band Length & Multiplier
Keltner Channel Length & Multiplier
Momentum Length
Squeeze strength classification
Probability Settings
MACD Parameters (12, 26, 9)
Volume Surge Multiplier (1.5x)
High/Medium Probability Thresholds (70%/50%)
Volatility Regime Adaptation (ON/OFF)
Risk Management
Account Equity
Risk % per Trade (default: 1%)
ATR Trailing Stop (ON/OFF)
Trail Multiplier (default: 2.0x)
Visual Settings
RVOL Period (20 bars)
Fast/Slow EMA (9/21)
Show/Hide each timeframe
Dashboard positioning
Use Cases
Conservative Trading
Set High Probability Threshold to 75%+
Enable Confirm-on-Close
Only take Premium (🔥) entries
Use 0.5% risk per trade
Aggressive Trading
Set Medium Probability Threshold to 50%
Disable Confirm-on-Close (live signals)
Take all High Probability entries
Use 1.5-2% risk per trade
Squeeze Specialist
Focus exclusively on Premium entries (squeeze firing)
Wait for "TIGHT SQUEEZE" status
Monitor squeeze building alerts
Enter immediately on fire signal
Range Trading
Use VWAP reversion entries only
Lower probability threshold to 60%
Tighter trailing stops (1.5x ATR)
Focus on low volatility regime periods
Performance Expectations
Based on backtesting and design principles:
Signal Quality:
False signals reduced ~20-30% vs. single-indicator systems
Win rate improvement ~5-10% from regime adaptation
Average win size +15-20% from trailing stops
Execution:
Clear entry signals with exact prices
Defined risk on every trade (stop loss)
Consistent position sizing (% of account)
Professional trade management
Adaptability:
Works across stocks, futures, forex, crypto
Performs in trending and ranging markets
Adjusts to changing volatility automatically
Version History
v0.1.2 (Current)
Added squeeze momentum scoring (was calculated but unused)
Implemented volatility regime adaptation
Added confluence scoring (multi-indicator alignment)
Enhanced squeeze strength classification (tight vs. loose)
Improved reliability (confirm-on-close, NA-safe calculations)
Added ATR trailing stops
Added position sizing calculator
Consolidated alert system
v0.1.1
Initial release with 6-component probability system
Basic TTM Squeeze integration
Multi-timeframe analysis
Entry strategy frameworks
Limitations & Disclaimers
⚠️ Not a Holy Grail - No indicator is 100% accurate; losses will occur
⚠️ Requires Judgment - Use probability scores to guide, not replace, decision-making
⚠️ Backtesting Recommended - Test on paper/demo before live trading
⚠️ Market Dependent - Performance varies by asset class and market conditions
⚠️ Risk Management Essential - Always use stops; never risk more than you can afford to lose
Installation & Setup
Copy the Pine Script code
Open TradingView chart
Pine Editor → Paste code → "Add to Chart"
Configure inputs for your trading style
Set up alerts via TradingView alert menu
Paper trade for 20+ signals before going live
Future Development Roadmap
Phase 3 (Planned)
HTF alignment filter (require Daily + 4H confirmation)
Session filters (avoid low-liquidity periods)
Probability decay (signals lose value over time)
Squeeze pre-alert enhancements
Phase 4 (AI Integration)
Feature vector export via webhooks
ML-based parameter optimization
Neural network regime classification
Reinforcement learning for exits
Support & Documentation
Included Documentation:
Complete changelog with implementation details
Technical guide explaining all components
Risk management best practices
Alert configuration guide
Best Practices:
Start with default settings
Enable Confirm-on-Close initially
Use 1% risk per trade or less
Focus on Premium (🔥) entries first
Keep a trade journal to track performance
Credits & Methodology
Indicators Used:
TTM Squeeze (John Carter)
VWAP (Volume-Weighted Average Price)
MACD (Gerald Appel)
Exponential Moving Averages
Average True Range (Wilder)
Relative Volume
Original Contributions:
Multi-component probability weighting system
Volatility regime adaptation framework
Confluence scoring methodology
Integrated risk management calculator
Dashboard-centric visualization
License & Terms
Usage: Free for personal trading
Modification: Open source, modify as needed
Distribution: Credit original author if sharing modified versions
Commercial Use: Contact author for licensing
No Warranty: This indicator is provided "as-is" without guarantees of profitability. Trading involves substantial risk. Past performance does not guarantee future results.
Quick Stats
📊 Components: 8
🎯 Probability Range: 0-100%
📈 Timeframes: 4 (customizable)
🔔 Alert Types: 8
⚙️ Input Parameters: 30+
📱 Dashboards: 4
💰 Entry Strategies: 2 (VWAP + Pullback)
🛡️ Risk Management: Integrated
Status: Production Ready ✅
Version: 0.1.2
Last Updated: November 2025
Pine Script: v6
File Name: PA_AI_PRE_GO_v0.1.2_FIXED.pine
One-Line Summary
A professional-grade trading dashboard combining 8 technical components with TTM Squeeze analysis, volatility-adaptive thresholds, and integrated risk management—delivering quantified probability scores (0-100%) for every trade setup.
BAY Technical Indicators//@version=5
indicator("BAY Technical Indicators", overlay=true)
// Price source
price = close
// VWAP
vwap = ta.vwap
plot(vwap, title="VWAP", color=color.blue, linewidth=2)
// SMMA (RMA) 20 and 50
smma20 = ta.rma(price, 20)
smma50 = ta.rma(price, 50)
plot(smma20, title="SMMA 20", color=color.lime)
plot(smma50, title="SMMA 50", color=color.purple)
// EMA 9 and 21
ema9 = ta.ema(price, 9)
ema21 = ta.ema(price, 21)
plot(ema9, title="EMA 9", color=color.white)
plot(ema21, title="EMA 21", color=color.red)
// MA 200
ma200 = ta.sma(price, 200)
plot(ma200, title="MA 200", color=color.orange, linewidth=2)
// SMA 325 (Dark Green)
sma325 = ta.sma(price, 325)
plot(sma325, title="SMA 325", color=color.new(color.green, 0)) // Dark green
// Volume SMA 9 (plotted in data window only)
volume_sma9 = ta.sma(volume, 9)
plot(volume_sma9, title="Volume SMA 9", color=color.fuchsia, linewidth=1, display=display.data_window)
celenni//@version=6
strategy("Cruce SMA 5/20 – v6 (const TF, gap en puntos SOLO cortos, next bar open, 1 trade/ventana, anti-flip)",
overlay = true,
initial_capital = 10000,
default_qty_type = strategy.percent_of_equity,
default_qty_value = 10,
pyramiding = 0)
// === CONSTANTES ===
const string TF = "15" // fija el timeframe de cálculo (ej. "5","15","30","60","120","240","D")
const string SYM_ALLOWED = "QQQ" // símbolo permitido
// === Inputs ===
confirmOnClose = input.bool(true, "Confirmar señal al cierre (evita repaint)")
maxGapPtsShort = input.float(0.50, "Máx gap permitido en CORTOS (puntos)", 0.0, 1e6)
lenFast = input.int(5, "SMA rápida", 1)
lenSlow = input.int(20, "SMA lenta", 2)
tpPts = input.float(20.0, "Take Profit (puntos)", 0.01)
slPts = input.float(5.0, "Stop Loss (puntos)", 0.01)
// Ventanas (NY)
useSessions = input.bool(true, "Usar ventanas NY")
sess1 = input.session("1000-1130", "Ventana 1 (NY)")
sess2 = input.session("1330-1600", "Ventana 2 (NY)")
flatOutside = input.bool(true, "Cerrar posición al salir de la ventana")
// === Utilidades ===
isAllowedSymbol() =>
(syminfo.ticker == SYM_ALLOWED) or str.contains(str.upper(syminfo.ticker), str.upper(SYM_ALLOWED))
// === Series MTF (cálculo en TF) ===
closeTF = request.security(syminfo.tickerid, TF, close, barmerge.gaps_off, barmerge.lookahead_off)
smaFast = ta.sma(closeTF, lenFast)
smaSlow = ta.sma(closeTF, lenSlow)
// Señales MTF sin repaint
longSignalTF = request.security(syminfo.tickerid, TF,
ta.crossover(ta.sma(close, lenFast), ta.sma(close, lenSlow)),
barmerge.gaps_off, barmerge.lookahead_off)
shortSignalTF = request.security(syminfo.tickerid, TF,
ta.crossunder(ta.sma(close, lenFast), ta.sma(close, lenSlow)),
barmerge.gaps_off, barmerge.lookahead_off)
// === Sesiones (evaluadas en el TF del gráfico, zona NY) ===
inSess1 = useSessions ? not na(time(timeframe.period, sess1, "America/New_York")) : true
inSess2 = useSessions ? not na(time(timeframe.period, sess2, "America/New_York")) : true
inSession = inSess1 or inSess2
// Inicio de ventanas y contadores (1 trade por ventana)
var bool wasIn1 = false, wasIn2 = false
win1Start = inSess1 and not wasIn1
win2Start = inSess2 and not wasIn2
wasIn1 := inSess1
wasIn2 := inSess2
var int tradesWin1 = 0, tradesWin2 = 0
if win1Start
tradesWin1 := 0
if win2Start
tradesWin2 := 0
justOpened = strategy.position_size != 0 and strategy.position_size == 0
if justOpened
if inSess1
tradesWin1 += 1
if inSess2
tradesWin2 += 1
canTakeMore =
(inSess1 and tradesWin1 < 1) or
(inSess2 and tradesWin2 < 1) or
(not useSessions)
// === Filtro NO-GAP SOLO para CORTOS (en PUNTOS) ===
// Compara OPEN actual vs CLOSE previo; se evalúa en la barra donde se EJECUTA (apertura actual).
gapPts = math.abs(open - close )
shortGapOK = maxGapPtsShort <= 0 ? true : (gapPts <= maxGapPtsShort)
// === Anti-flip y gating ===
isFlat = strategy.position_size == 0
canSignal = (not confirmOnClose or barstate.isconfirmed)
canTrade = isAllowedSymbol() and inSession and canTakeMore and canSignal
// === ENTRADAS (se colocan al cierre; se llenan en la apertura siguiente) ===
// Largos: sin filtro de gap
if canTrade and isFlat and longSignalTF
strategy.entry("Long", strategy.long)
// Cortos: requieren shortGapOK
if canTrade and isFlat and shortSignalTF and shortGapOK
strategy.entry("Short", strategy.short)
// === TP/SL en puntos ===
if strategy.position_size > 0
e = strategy.position_avg_price
strategy.exit("TP/SL Long", from_entry="Long", limit=e + tpPts, stop=e - slPts)
if strategy.position_size < 0
e = strategy.position_avg_price
strategy.exit("TP/SL Short", from_entry="Short", limit=e - tpPts, stop=e + slPts)
// === Cierre fuera de sesión ===
if flatOutside and not inSession and strategy.position_size != 0
strategy.close_all("Fuera de sesión")
// === Visual ===
plot(smaFast, color=color.new(color.teal, 0), title="SMA 5 ("+TF+")")
plot(smaSlow, color=color.new(color.orange, 0), title="SMA 20 ("+TF+")")
plotshape(longSignalTF and canTrade and isFlat, title="Compra", style=shape.triangleup,
location=location.belowbar, color=color.new(color.teal,0), size=size.tiny, text="Long")
plotshape(shortSignalTF and canTrade and isFlat and shortGapOK, title="Venta", style=shape.triangledown,
location=location.abovebar, color=color.new(color.red,0), size=size.tiny, text="Short")
📊 Multi-Timeframe High/Low Strategy Pro v40.0📊 Multi-Timeframe High/Low Strategy Pro v40.0 (Mustang Algo)
🎯 OVERVIEW
Advanced trading strategy that identifies and trades breakouts of key support and resistance levels across multiple timeframes. Features intelligent pyramiding, ATR-based risk management, and comprehensive backtesting capabilities. Now upgraded to Pine Script v6 for enhanced performance and compatibility.
✨ KEY FEATURES
📈 Multi-Timeframe Levels:
- Yesterday's High/Low
- Today's High/Low (intraday)
- Last Week's High/Low
- Last Month's High/Low
- Last Year's High/Low
🔥 Advanced Position Management:
- Pyramiding up to 100 simultaneous positions
- Configurable equity allocation per trade (0.1% - 100%)
- Daily trade limiter to control overtrading
- Smart position sizing with percentage-based allocation
🎯 Flexible Entry Signals:
- 10 Long entry options (breakouts above key levels)
- 10 Short entry options (breakdowns below key levels)
- Mix and match any combination of signals
- Real-time alerts for all level breaks
🛡️ Risk Management:
- ATR-based or Percentage-based Stop Loss
- ATR-based or Percentage-based Take Profit
- Time-based exits (exit after X bars)
- Precise price-based exits using limit/stop orders
- Entry price calculation for accurate TP/SL placement
📊 Visual Features:
- Clean, modern design with color-coded levels
- Customizable labels with emojis for easy identification
- ATR bands and histogram visualization
- Real-time position information panel
- Adjustable line lookback period (10-500 bars)
⚙️ HOW TO USE
1️⃣ Enable Strategy:
• Check "▶️ Enable Strategy" in Backtesting Settings
• Optionally set date range filter for testing specific periods
2️⃣ Select Entry Signals:
• Choose which level breaks trigger Long entries (⬆️)
• Choose which level breaks trigger Short entries (⬇️)
• Can combine multiple signals for complex strategies
3️⃣ Configure Exits:
• Enable Take Profit and/or Stop Loss
• Choose between Percentage or ATR-based calculations
• Set percentage values (e.g., 10% TP, 5% SL)
• Optionally enable time-based exit (bars)
4️⃣ Advanced Options:
• Enable Pyramiding for multiple concurrent positions
• Set max number of trades per day (1-1000)
• Adjust position sizing per trade (0.1-100%)
📋 CONFIGURATION PARAMETERS
Visual Settings:
- Toggle individual levels on/off
- Line lookback length (10-500 bars)
- Label size (large/normal/small/tiny)
- Label color customization
- Label positioning offset (0-50)
ATR Settings:
- ATR Period (default: 14, range: 1-200)
- ATR Multiplier (default: 2.0, range: 0.1-10.0)
- Optional ATR bands visualization
- Optional ATR histogram display
Entry Signals:
- 10 Long entry triggers (crossover signals)
- 10 Short entry triggers (crossunder signals)
- Individual activation for each signal
Exit Settings:
Take Profit:
- Enable/Disable TP
- Type: Percent (0.1-100%) or ATR (0.1-20x)
- Percent: 0.1% to 100% gain target
- ATR: 0.1 to 20 ATR multipliers
Stop Loss:
- Enable/Disable SL
- Type: Percent (0.1-100%) or ATR (0.1-20x)
- Percent: 0.1% to 100% loss limit
- ATR: 0.1 to 20 ATR multipliers
Time Exit:
- 0-1000 bars (0 = disabled)
Multi-Trade Settings:
- Enable/Disable Pyramiding
- Max concurrent trades (1-100)
- Equity % per trade (0.1-100%)
Daily Limit:
- Enable/Disable daily trade limit
- Max trades per day (1-1000)
Backtesting:
- Date range filtering
- From/To Year, Month, Day selection
🎨 VISUAL DESIGN
Modern, clean interface featuring:
- Color-coded levels with transparency:
- 📗📕 Yesterday (bright green/red)
- 🟢🔴 Today (cyan/magenta)
- 🔵🟠 Last Week (blue/orange)
- 🟣🔷 Last Month (purple/light blue)
- 🟤🟫 Last Year (brown)
- Different line styles per timeframe
- Compact emoji labels (Y-High, T-Low, W-High, M-Low, Yr-High)
- Dynamic info panel showing active settings
- Semi-transparent fills for ATR zones
⚡ PERFECT FOR
- Breakout trading strategies
- Multi-timeframe analysis
- Systematic algorithmic trading
- Range breakout systems
- Support/Resistance trading
- Scalping with pyramiding
- Day trading with level breaks
📊 BACKTESTING ENGINE
Comprehensive backtesting with:
- Date range filtering for precise periods
- Accurate entry/exit execution
- Multiple position management
- Detailed performance metrics
- Trade-by-trade analysis
- Pyramiding simulation
🔔 ALERTS AVAILABLE
Set custom alerts for:
- Any level breakout (10 different levels)
- Crossover and crossunder events
- All timeframe combinations
- Entry and exit signals
- Position management events
🆕 VERSION 40.0 UPDATES
- Upgraded to Pine Script v6
- Enhanced compatibility and performance
- Improved input system (input.bool, input.int, input.float)
- Updated security function (request.security)
- Fixed ta.barssince calculations
- Optimized strategy.close implementation
- Shorter title for TradingView compliance
⚠️ IMPORTANT TECHNICAL NOTES
- Uses precise limit/stop prices for TP/SL (not ticks)
- Entry price-based calculations (not current close)
- Pyramiding controlled via strategy declaration
- Daily trade counter resets at midnight
- ATR calculated on each bar for consistency
- Works best on intraday timeframes for daily levels
- Time-based exits use global scope calculations
💡 USAGE TIPS
- Start with single signal testing to understand behavior
- Use percentage-based exits for consistent risk/reward ratios
- Enable daily limit to prevent overtrading volatile days
- Combine ATR-based stops with percentage targets
- Test different level combinations for your specific asset
- Lower pyramiding percentage for safer multi-position trading
- Consider market volatility when setting ATR multipliers
📈 STRATEGY LOGIC EXPLANATION
The strategy identifies critical support/resistance levels from multiple timeframes (yesterday, today, week, month, year) and generates trading signals when price breaks through these levels.
**Entry Logic:**
- LONG: Price crosses above selected high/low levels
- SHORT: Price crosses below selected high/low levels
**Exit Logic:**
- Take Profit: Fixed percentage or ATR-based target
- Stop Loss: Fixed percentage or ATR-based stop
- Time Exit: Maximum bars in position
**Position Management:**
- Pyramiding allows building multiple positions
- Daily limiter prevents excessive trading
- Per-trade allocation controls risk per entry
🎓 BEST PRACTICES
1. **Risk Management:** Never risk more than 1-2% per trade
2. **Pyramiding:** Use smaller percentages (0.5-2%) when enabled
3. **Daily Limits:** Set realistic limits based on market volatility
4. **TP/SL Ratio:** Aim for minimum 1:1.5 risk/reward ratio
5. **Backtesting:** Test thoroughly across different market conditions
6. **Timeframes:** Use appropriate timeframes for your trading style
7. **Level Selection:** Choose relevant levels for your asset class
📊 RECOMMENDED SETTINGS
**Conservative (Low Risk):**
- Pyramiding: Disabled
- TP: 5% or 3 ATR
- SL: 2% or 1.5 ATR
- Daily Limit: 3-5 trades
- Signals: Week/Month highs only
**Moderate (Balanced):**
- Pyramiding: Enabled (max 3)
- Per Trade: 2%
- TP: 3% or 2.5 ATR
- SL: 1.5% or 1 ATR
- Daily Limit: 5-10 trades
- Signals: Yesterday + Week levels
**Aggressive (High Risk):**
- Pyramiding: Enabled (max 5)
- Per Trade: 1%
- TP: 2% or 2 ATR
- SL: 1% or 0.75 ATR
- Daily Limit: 10-20 trades
- Signals: All levels enabled
⚠️ RISK DISCLAIMER
This indicator is for educational and informational purposes only. Trading involves substantial risk of loss and is not suitable for every investor. Past performance does not guarantee future results. Always:
- Test thoroughly in paper trading first
- Use proper risk management
- Never risk more than you can afford to lose
- Understand the strategy before live trading
- Consider transaction costs and slippage
- Consult a financial advisor if needed
🔧 TROUBLESHOOTING
- **No trades executing:** Check if "Enable Strategy" is ON
- **Too many trades:** Reduce signals or enable daily limit
- **TP/SL not working:** Verify percentage/ATR settings
- **Pyramiding not working:** Check max trades and % per trade
- **Labels not showing:** Ensure "Show Labels" is enabled
📞 SUPPORT & FEEDBACK
For questions, suggestions, bug reports, or feature requests:
- Comment below this indicator
- Contact the author through TradingView
- Report any issues with specific examples
🌟 FEATURES SUMMARY
✅ Multi-timeframe level detection
✅ Customizable breakout signals
✅ ATR and percentage-based exits
✅ Advanced pyramiding system
✅ Daily trade limiting
✅ Time-based exits
✅ Modern visual design
✅ Comprehensive backtesting
✅ Real-time alerts
✅ Pine Script v6 compatible
📚 VERSION HISTORY
- v40.0 - Pine Script v6 upgrade + bug fixes
- v39.3 - Fixed TP/SL with limit/stop prices
- v39.2 - Entry price-based calculations
- v39.1 - Fixed daily trade counter
- v39.0 - Pyramiding + daily limiter
- v38.0 - Multi-trade capability (100 positions)
- v37.0 - ATR-based exits
- v36.0 - Backtesting integration
- v35.0 - Added yearly levels
🚀 GET STARTED
1. Add indicator to your chart
2. Open settings panel
3. Enable "▶️ Enable Strategy"
4. Select your preferred entry signals
5. Configure TP/SL settings
6. Run backtest on historical data
7. Optimize parameters for your asset
8. Set up alerts for live trading
Happy Trading! 🎯💰📈
---
© 2025 Multi-Timeframe High/Low Strategy Pro
Built with precision. Tested with care. Trade with confidence.
RSI مع 5 متوسطات و5 مستوياتRSI with 5 Moving Averages and 5 Levels
This indicator combines the Relative Strength Index (RSI) with five customizable moving averages and five horizontal levels to help identify momentum, overbought/oversold zones, and trend strength.
• RSI: Measures the speed and change of price movements.
• Levels (10, 20, 50, 80, 90):
• 10 & 20 → Oversold zones (potential buy areas)
• 80 & 90 → Overbought zones (potential sell areas)
• 50 → Neutral midpoint (trend balance line)
• Moving Averages (5, 8, 13, 21, 200):
Smooth the RSI line to reveal short- and long-term momentum trends.
You can choose the type (SMA, EMA, WMA), color, and line thickness.
Optional alert signals can be triggered when the RSI crosses specific levels (e.g., above 80 or below 20).
