Mulai

Cari skrip untuk "西班牙人VS奥萨苏纳"

Premium/Discount (Input)Used to show Contango or Backwardation in futures contracts vs spot price. You can input your own tickers so can technically can be used to compare anything. * In this example I'm showing Okex Quarterly contract vs Okex spot index price because it showcases it better. * If you are using this after 2019 the default setting will not work because I set it to Bitmex which does not currently have a "current contract in front" ticker available. It should be fairly self explanatory, but just ask below if you have any questions.
Indikator Pine Script®
oleh Plumptoiletduck
8
Volume Profile Free Ultra SLI (100 Levels Value Area VWAP) - RRBVolume Profile Free Ultra SLI by RagingRocketBull 2019 Version 1.0 This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 100 horizontal bars. This is basically the MAX SLI version with +50 more Pinescript v4 line objects added as levels. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free Ultra SLI, Free History. This is the Free Ultra SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free Ultra SLI: 100 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 300 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 100 levels (line implementation) - 2x SLI modes for even higher res: 300 levels with 3x vertical SLI, 100 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels, Transparency for buy/sell levels WARNING: - Compilation Time: 1 min 20 sec Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz Buy/Sell SLI mode with 100 or Vertical SLI with 300 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 100 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 300 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range and may be inaccurate. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work (you can have a mixed mode: 2nd instance - auto, 3rd - manual) Notes: - This code uses Pinescript v3 compatibility framework - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 4-5 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - 100 levels consist of 50 main plot levels and 50 line objects used as alternate levels, differences are: - line objects are always shown on top of other objects, such as plot levels, zero line and side cover, it's not possible to cover/move them below. - all line objects have variable lengths, use actual x,y coords and don't need side cover, while all plot levels have a fixed length of 100 bars, use offset and require cover. - all key properties of line objects, such as x,y coords, color can be modified, objects can be moved/deleted, while this is not possible for static plot levels. - large width values cause line objects to expand only up/down from center while their length remains the same and stays within the level's start/end points similar to an area style. - large width values make plot levels expand in all directions (both h/v), beyond level start/end points, sometimes overlapping zero line, making them an inaccurate % length representation, as opposed to line objects/plot levels with area style. - large width values translate into different widths on screen for line objects and plot levels. - you can't compensate for this unwanted horiz width expansion of plot levels because width uses its own units, that don't translate into bars/pixels. - line objects are visible only when num_levels > 50, plot levels are used otherwise - Since line objects are lines, plot levels also use style line because other style implementations will break the symmetry/spacing between levels. - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - You can change level transparency of line objects. Due to Pinescript limitations, only discrete values are supported. - Inverse transp correlation creates the necessary illusion of "covered" line objects, although they are shown on top of the cover all the time - If custom lines_transp is set the illusion will break because transp range can't be skewed easily (i.e. transp 0..100 is always mapped to 100..0 and can't be mapped to 50..0) - transparency can applied to lines dynamically but nva top zone can't be completely removed because plot/mixed type of levels are still used when num_levels < 50 and require cover - transparency can't be applied to plot levels dynamically from script this can be done only once from UI, and you can't change plot color for the past length bars - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - Range selection/Anchoring is not accurate on charts with time gaps since you can only anchor from a point in the future and measure distance in time periods, not actual bars, and there's no way of knowing the number of future gaps in advance. - Adjust Width for Log Scale mode now also works on high precision charts with small prices (i.e. 0.00001) - in Adjust Width for Log Scale mode Level1 width extremes can be capped using max deviation (when level1 = 0, shift = 0 width becomes infinite) - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. I am your grandfather, Luke! Now, join the Dark Side in your father's steps or be destroyed! Once more the Sith will rule the Galaxy, and we shall have peace...
Indikator Pine Script®
oleh RagingRocketBull
112
Volume Profile Free MAX SLI (50 Levels Value Area VWAP) by RRBVolume Profile Free MAX SLI by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free MAX SLI versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 50 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are several versions: Free Pro, Free MAX SLI, Free History. This is the Free MAX SLI version. The Differences are listed below: - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX SLI: 50 levels, packed to the limit, 2x SLI modes for Buy/Sell or even higher res 150 levels - Free History: auto highest/lowest, historic poc/va levels for each session Features: - High-Res Volume Profile with up to 50 levels (3 implementations) - 20-30x faster than the old Pro versions especially on lower tfs with long history - 2x SLI modes for even higher res: 150 levels with 3x vertical SLI, 50 buy/sell levels with 2x horiz SLI - Calculate Volume Profile on full history - POC, Developing POC Levels - Buy/Sell/Total volume modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level/spacing (required) - select range (start_bar, range length), confirm with range highlighting - select volume type: Buy/Sell/Total - select mode Value Area/VWAP to show corresponding levels - flip/select anchor point to position the buy/sell levels - use Horiz SLI mode for 50 Buy/Sell or Vertical SLI for 150 levels if needed - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. SLI: - use SLI modes to extend the functionality of the indicator: - Horiz Buy/Sell 2x SLI lets you view 50 Buy/Sell Levels at the same time - Vertical Max_Vol 3x SLI lets you increase the resolution to 150 levels - you need at least 2 instances of the indicator attached to the same chart for SLI to work 1) Enable Horiz SLI: - attach 2 indicator instances to the chart - make sure all instances have the same min_level/max_level/range/spacing settings - select volume type for each instance: you can have a buy/sell or buy/total or sell/total SLI. Make sure your buy volume instance is the last attached to be displayed on top of sell/total instances without overlapping. - set buy_sell_sli_mode to true for indicator instances with volume_type = buy/sell, for type total this is optional. - this basically tells the script to calculate % lengths based on total volume instead of individual buy/sell volumes and use ext offset for sell levels - Sell Offset is calculated relative to Buy Offset to stack/extend sell after buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - there are no master/slave instances in this mode, all indicators are equal, poc/va levels are not affected and can work independently, i.e. one instance can show va levels, another - vwap. 2) Enable Vertical SLI: - attach the first instance and evaluate the full range to roughly determine where is the highest max_vol/poc level i.e. 0..20000, poc is in the bottom half (third, middle etc) or - add more instances and split the full vertical range between them, i.e. set min_level/max_level of each corresponding instance to 0..10000, 10000..20000 etc - make sure all instances have the same range/spacing settings - an instance with a subrange containing the poc level of the full range is now your master instance (bottom half). All other instances are slaves, their levels will be calculated based on the max_vol/poc of the master instance instead of local values - set show_max_vol_sli to true for the master instance. for slave instances this is optional and can be used to check if master/slave max_vol values match and slave can read the master's value. This simply plots the max_vol value - you can also attach all instances and set show_max_vol_sli to true in all of them - the instance with the largest max_vol should become the master Auto/Manual Ext Max_Vol Modes: - for auto vertical max_vol SLI mode set max_vol_sli_src in all slave instances to the max_vol of the master indicator: "VolumeProfileFree_MAX_RRB: Max Volume for Vertical SLI Mode". It can be tricky with 2+ instances - in case auto SLI mode doesn't work - assign max_vol_sli_ext in all slave instances the max_vol value of the master indicator manually and repeat on each change - manual override max_vol_sli_ext has higher priority than auto max_vol_sli_src when both values are assigned, when they are 0 and close respectively - SLI is disabled - master/slave max_vol values must match on each bar at all times to maintain proper level scale, otherwise slave's levels will look larger than they should relative to the master's levels. - Max_vol (red) is the last param in the long list of indicator outputs - the only true max_vol/poc in this SLI mode is the master's max_vol/poc. All poc/va levels in slaves will be irrelevant and are disabled automatically. Slaves can only show VWAP levels. - VA Levels of the master instance in this SLI mode are calculated based on the subrange, not the whole range. Cross check with the full range. WARNING! - auto mode max_vol_sli_src is experimental and may not work as expected - you can only assign auto mode max_vol_sli_src = max_vol once due to some bug with unhandled exception/buffer overflow in Tradingview. Seems that you can clear the value only by removing the indicator instance - sometimes you may see a "study in error state" error when attempting to set it back to close. Remove indicator/Reload chart and start from scratch - volume profile may not finish to redraw and freeze in an ugly shape after an UI parameter change when max_vol_sli_src is assigned a max_vol value. Assign it to close - VP should redraw properly, but it may not clear the assigned max_vol value - you can't seem to be able to assign a proper auto max_vol value to the 3rd slave instance - 2x Vertical SLI works and tested in both auto/manual, 3x SLI - only manual seems to work Notes: - This code is 20x-30x faster (main for cycle is removed) especially on lower tfs with long history - only 2-3 sec load/redraw time vs 30-60 sec of the old Pro versions - Instead of repeatedly calculating the total sum of volumes for the whole range on each bar, vol sums are now increased on each bar and passed to the next in the range making it a per range vs per bar calculation that reduces time dramatically - hist_base for levels still results is ugly redraw - if you don't see a volume profile check range settings: min_level/max_level and spacing, set spacing to 0 (or adjust accordingly based on the symbol's precision, i.e. 0.00001) - you can view either of Buy/Sell/Total volumes, but you can't display Buy/Sell levels at the same time using a single instance (this would 2x reduce the number of levels). Use 2 indicator instances in horiz buy/sell sli mode for that. - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed length. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Width - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors from input (only plot transparency) - this requires 2x plot outputs => 2x reduces the number of levels to fit the max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input to change it - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume P.S. Gravitonium Levels Are Increasing. Unobtainium is nowhere to be found! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
Indikator Pine Script®
oleh RagingRocketBull
25
ST_Trend_ReversalSTRONG TREND REVERSAL INDICATOR The code is the percentage difference between the spot price of a given financial asset and its 200-day MA of that period. My standard setup is Daily, and I think it's got very good predictive power at that timeframe. It can be read in two ways: 1. Values extremely above or below the 200-period MA present chances of buying/selling agains the prevailing trend. 2. Values closely above or below the 200-period MA are make-or-break market periods, where a medium-term trend becomes evident. Breaks above or below the MA are associated with strong chances of directional movements. But it's not fool-proof as false breaks have become commonplace nowadays. Other way to use it is as confirmation of breakdowns: For example, an asset that loses its 200-day MA and then can't rally above it becomes exposed to steep losses afterwards. It's also helpful to use in volatility trading: the closer the asset goes to its MA, the lower goes implied vol, and thus better opportiunities to be long volatility on those occasions where direction is hard to predict. STRI = close/(200dMA) Values over 100 indicate percentage premiums of spot vs its moving average. Values below indicate percentage discounts of spot vs its moving average.
Indikator Pine Script®
oleh Daniel_Urdaneta
2
Ersoy-intersection(Kesisme)-Update-1website: www.ersoytoptas.com Newspaper : tr.investing.com hi , Friends i wanna be someone who wants to help everyone updated my script he published some time ago. What happened? * intersection When ever Bar Color Yellow Be * Alarms to be more comprehensible * Short and Long Days Choosing a Opportunities * Source Opportunities All Charts Usable( Example ;15,30,60 ... vs) and ALL MARKETS ( Stocks , forex , ... vs) i strive to improve further Easy to get
Indikator Pine Script®
oleh Lemnos
8
Directional Volume Cloud MTFThe Directional Volume Cloud MTF transforms raw volume into a visually intuitive cloud histogram that highlights directional bias and exhaustion zones. 🔍 Core Logic - Volume bias is calculated using candle direction (bullish/bearish) and smoothed via EMA. - Bias strength is normalized against average volume to produce a ratio from -1 to +1. - Color and opacity dynamically reflect bias direction and strength — pale clouds indicate weak volume, while vivid clouds signal strong conviction. Features - Customizable bullish/bearish colors - Dynamic opacity based on volume strength - Declining volume signals for potential reversals - Multi-timeframe bias overlay (e.g., daily bias on intraday chart) 📈 Use Cases - Spot volume exhaustion before reversals - Confirm breakout strength with bias intensity - Compare short-term vs long-term volume pressure Whether you're scalping intraday moves or validating swing setups, this cloud-based volume heatmap offers a clean, modular way to visualize market conviction.
Indikator Pine Script®
oleh Sjswoop
v2.0—Tristan's Multi-Indicator Reversal Strategy🎯 Multi-Indicator Reversal Strategy - Optimized for High Win Rates A powerful confluence-based strategy that combines RSI, MACD, Williams %R, Bollinger Bands, and Volume analysis to identify high-probability reversal points . Designed to let winners run with no stop loss or take profit - positions close only when opposite signals occur. Also, the 3 hour timeframe works VERY well—just a lot less trades. 📈 Proven Performance This strategy has been backtested and optimized on multiple blue-chip stocks with 80-90%+ win rates on 1-hour timeframes from Aug 2025 through Oct 2025: ✅ V (Visa) - Payment processor ✅ MSFT (Microsoft) - Large-cap tech ✅ WMT (Walmart) - Retail leader ✅ IWM (Russell 2000 ETF) - Small-cap index ✅ NOW (ServiceNow) - Enterprise software ✅ WM (Waste Management) - Industrial services These stocks tend to mean-revert at extremes, making them ideal candidates for this reversal-based approach. I only list these as a way to show you the performance of the script. These values and stock choices may change over time as the market shifts. Keep testing! 🔑 How to Use This Strategy Successfully Step 1: Apply to Chart Open your desired stock (V, MSFT, WMT, IWM, NOW, WM recommended) Set timeframe to 1 Hour Apply this strategy Check that the Williams %R is set to -20 and -80, and "Flip All Signals" is OFF (can flip this for some stocks to perform better.) Step 2: Understand the Signals 🟢 Green Triangle (BUY) Below Candle: Multiple indicators (RSI, Williams %R, MACD, Bollinger Bands) show oversold conditions Enter LONG position Strategy will pyramid up to 10 entries if more buy signals occur Hold until red triangle appears 🔴 Red Triangle (SELL) Above Candle: Multiple indicators show overbought conditions Enter SHORT position (or close existing long) Strategy will pyramid up to 10 entries if more sell signals occur Hold until green triangle appears 🟣 Purple Labels (EXIT): Shows when positions close Displays count if multiple entries were pyramided (e.g., "Exit Long x5") Step 3: Let the Strategy Work Key Success Principles: ✅ Be Patient - Signals don't occur every day, wait for quality setups ✅ Trust the Process - Don't manually close positions, let opposite signals exit ✅ Watch Pyramiding - The strategy can add up to 10 positions in the same direction ✅ No Stop Loss - Positions ride through drawdowns until reversal confirmed ✅ Session Filter - Only trades during NY session (9:30 AM - 4:00 PM ET) ⚙️ Winning Settings (Already Set as Defaults) INDICATOR SETTINGS: - RSI Length: 14 - RSI Overbought: 70 - RSI Oversold: 30 - MACD: 12, 26, 9 (standard) - Williams %R Length: 14 - Williams %R Overbought: -20 ⭐ (check this! And adjust to your liking) - Williams %R Oversold: -80 ⭐ (check this! And adjust to your liking) - Bollinger Bands: 20, 2.0 - Volume MA: 20 periods - Volume Multiplier: 1.5x SIGNAL REQUIREMENTS: - Min Indicators Aligned: 2 - Require Divergence: OFF - Require Volume Spike: OFF - Require Reversal Candle: OFF - Flip All Signals: OFF ⭐ RISK MANAGEMENT: - Use Stop Loss: OFF ⭐⭐⭐ - Use Take Profit: OFF ⭐⭐⭐ - Allow Pyramiding: ON ⭐⭐⭐ - Max Pyramid Entries: 10 ⭐⭐⭐ SESSION FILTER: - Trade Only NY Session: ON - NY Session: 9:30 AM - 4:00 PM ET **⭐ = Critical settings for success** ## 🎓 Strategy Logic Explained ### **How It Works:** 1. **Multi-Indicator Confluence**: Waits for at least 2 out of 4 technical indicators to align before generating signals 2. **Oversold = Buy**: When RSI < 30, Williams %R < -80, price below lower Bollinger Band, and/or MACD turning bullish → BUY signal 3. **Overbought = Sell**: When RSI > 70, Williams %R > -20, price above upper Bollinger Band, and/or MACD turning bearish → SELL signal 4. **Pyramiding Power**: As trend continues and more signals fire in the same direction, adds up to 10 positions to maximize gains 5. **Exit Only on Reversal**: No arbitrary stops or targets - only exits when opposite signal confirms trend change 6. **Session Filter**: Only trades during liquid NY session hours to avoid overnight gaps and low-volume periods ### **Why No Stop Loss Works:** Traditional reversal strategies fail because they: - Get stopped out too early during normal volatility - Miss the actual reversal that happens later - Cut winners short with tight take profits This strategy succeeds because it: - ✅ Rides through temporary noise - ✅ Captures full reversal moves - ✅ Uses multiple indicators for confirmation - ✅ Pyramids into winning positions - ✅ Only exits when technical picture completely reverses --- ## 📊 Understanding the Display **Live Indicator Counter (Top Corner / end of current candles):** Bull: 2/4 Bear: 0/4 (STANDARD) Shows how many indicators currently align bullish/bearish "STANDARD" = normal reversal mode (buy oversold, sell overbought) "FLIPPED" = momentum mode if you toggle that setting Visual Indicators: 🔵 Blue background = NY session active (trading window) 🟡 Yellow candle tint = Volume spike detected 💎 Aqua diamond = Bullish divergence (price vs RSI) 💎 Fuchsia diamond = Bearish divergence ⚡ Advanced Tips Optimizing for Different Stocks: If Win Rate is Low (<50%): Try toggling "Flip All Signals" to ON (switches to momentum mode) Increase "Min Indicators Aligned" to 3 or 4 Turn ON "Require Divergence" Test on different timeframe (4-hour or daily) If Too Few Signals: Decrease "Min Indicators Aligned" to 2 Turn OFF all requirement filters Widen Williams %R bands to -15 and -85 If Too Many False Signals: Increase "Min Indicators Aligned" to 3 or 4 Turn ON "Require Divergence" Turn ON "Require Volume Spike" Reduce Max Pyramid Entries to 5 Stock Selection Guidelines: Best Suited For: Large-cap stable stocks (V, MSFT, WMT) ETFs (IWM, SPY, QQQ) Stocks with clear support/resistance Mean-reverting instruments Avoid: Ultra low-volume penny stocks Extremely volatile crypto (try traditional settings first) Stocks in strong one-directional trends lasting months 🔄 The "Flip All Signals" Feature If backtesting shows poor results on a particular stock, try toggling "Flip All Signals" to ON: STANDARD Mode (OFF): Buy when oversold (reversal strategy) Sell when overbought May work best for: V, MSFT, WMT, IWM, NOW, WM FLIPPED Mode (ON): Buy when overbought (momentum strategy) Sell when oversold May work best for: Strong trending stocks, momentum plays, crypto Test both modes on your stock to see which performs better! 📱 Alert Setup Create alerts to notify you of signals: 📊 Performance Expectations With optimized settings on recommended stocks: Typical results we are looking for: Win Rate: 70-90% Average Winner: 3-5% Average Loser: 1-3% Signals Per Week: 1-3 on 1-hour timeframe Hold Time: Several hours to days Remember: Past performance doesn't guarantee future results. Always use proper risk management.
Strategi Pine Script®
oleh OhRayOhRay
Money Volume • Buyers vs Sellers — @tgambinoxThis indicator estimates the total amount of money traded (Volume × Price) and splits it between buyers and sellers based on each candle’s behavior. It displays green bars for buyers and orange bars for sellers, allowing you to see which side of the market is concentrating the capital. Useful for detecting flow imbalances, buying/selling pressure, and confirming price moves alongside total monetary volume (blue line).
Indikator Pine Script®
oleh tgambinox
Prev 1-Min Volume • 5% Max Shares (TTP-ready)💡 Overview This tool was built to help Trade The Pool (TTP) traders comply with the new “5% per minute volume” rule — without needing to calculate anything manually. It automatically tracks the previous 1-minute volume, calculates 5% of it, and compares that to your planned order size. If your planned size is within the limit, it shows green ✅. If you’re above, it flashes red 🚫. And when liquidity spikes allow for more size, you’ll see a green glow and 🔔 alert — so you can size up confidently without breaking the rule. ⚙️ Features ✅ Auto-calculates 5% volume cap from the previous 1-min candle ✅ Displays previous volume, max allowed shares, and your planned size ✅ TTP “different volume” scaling option (e.g. 0.69 for 45M vs 65M real volume) ✅ Per-bar slice suggestion for 10s scalpers ✅ Corner selector (top-left, top-right, bottom-left, bottom-right) ✅ Visual glow and 🔔 alert when liquidity window opens ✅ Compact and real-time responsive on 10s charts
Indikator Pine Script®
oleh rrtaker86
mysourcetypesncsLibrary "mysourcetypes" Libreria personale per sorgenti estese (Close, Open, High, Low, Median, Typical, Weighted, Average, Average Median Body, Trend Biased, Trend Biased Extreme, Volume Body, Momentum Biased, Volatility Adjusted, Body Dominance, Shadow Biased, Gap Aware, Rejection Biased, Range Position, Adaptive Trend, Pressure Balanced, Impulse Wave) rclose()   Regular Close   Returns: Close price ropen()   Regular Open   Returns: Open price rhigh()   Regular High   Returns: High price rlow()   Regular Low   Returns: Low price rmedian()   Regular Median (HL2)   Returns: (High + Low) / 2 rtypical()   Regular Typical (HLC3)   Returns: (High + Low + Close) / 3 rweighted()   Regular Weighted (HLCC4)   Returns: (High + Low + Close + Close) / 4 raverage()   Regular Average (OHLC4)   Returns: (Open + High + Low + Close) / 4 ravemedbody()   Average Median Body   Returns: (Open + Close) / 2 rtrendb()   Trend Biased Regular   Returns: Trend-weighted price rtrendbext()   Trend Biased Extreme   Returns: Extreme trend-weighted price rvolbody()   Volume Weighted Body   Returns: Body midpoint weighted by volume intensity rmomentum()   Momentum Biased   Returns: Price biased towards momentum direction rvolatility()   Volatility Adjusted   Returns: Price adjusted by candle's volatility rbodydominance()   Body Dominance   Returns: Emphasizes body over wicks rshadowbias()   Shadow Biased   Returns: Price biased by shadow length rgapaware()   Gap Aware   Returns: Considers gap between candles rrejection()   Rejection Biased   Returns: Emphasizes price rejection levels rrangeposition()   Range Position   Returns: Where close sits within the candle range (0-100%) radaptivetrend()   Adaptive Trend   Returns: Adapts based on recent trend strength rpressure()   Pressure Balanced   Returns: Balances buying/selling pressure within candle rimpulse()   Impulse Wave   Returns: Detects impulsive moves vs corrections
Perpustakaan Pine Script®
oleh stefanoncs
MTF Multi EMA - IntradayMTF Multi EMA – Intraday Purpose: To quickly analyze trend direction and alignment across multiple timeframes (1m, 3m, 5m, 15m, 30m, and 60m) using fast and slow EMAs for each timeframe — and combine them into a simple “stack score” for easy visual decision-making. The script is tuned for Intraday Trading indicator by default. Concept Each timeframe (TF) — like 1m, 3m, 5m, etc. — has two EMAs: A fast EMA (shorter length) A slow EMA (longer length) When the fast EMA > slow EMA, that timeframe is bullish. When the fast EMA < slow EMA, that timeframe is bearish. By combining multiple timeframes together, the indicator helps you: Identify when all trends align bullishly (strong buy bias) Identify when all trends align bearishly (strong sell bias) Stay out during mixed or sideways phases Inputs Explained Setting Description 1m / 3m / 5m / 15m / 30m / 60m EMA Lengths Controls the EMA period for each timeframe’s fast and slow EMAs. Fast EMA Color Color for all fast EMAs plotted on chart. Slow EMA Color Color for all slow EMAs plotted on chart. Use Smooth Interpolation Ensures smoother plots when merging higher TF data into a smaller chart (recommended ON). Show Toggle visibility of each timeframe’s EMAs. Table Position Lets you move the mini dashboard to any chart corner. Stack Score The Stack Score measures how many timeframes are bullish vs bearish: Stack Score Meaning +6 All timeframes bullish → Strong Uptrend +3 to +5 Majority bullish → Bullish Bias 0 Neutral / Mixed → Sideways Market −3 to −5 Majority bearish → Bearish Bias −6 All timeframes bearish → Strong Downtrend Table Display At the chosen chart corner, you’ll see: TF Direction 1m 🟢 B (Bullish) / 🔴 S (Bearish) 3m 🟢 B (Bullish) / 🔴 S (Bearish) 5m 🟢 B (Bullish) / 🔴 S (Bearish) 15m 🟢 B (Bullish) / 🔴 S (Bearish) 30m 🟢 B (Bullish) / 🔴 S (Bearish) 60m 🟢 B (Bullish) / 🔴 S (Bearish) Score Final alignment score (color-coded) Color meanings: 🟢 Green cell = bullish for that TF 🔴 Red cell = bearish for that TF The Score cell background color changes with strength: Bright green → strong bull Yellow → neutral Red / Maroon → strong bear How to Use for Trading (Intraday NIFTY 5m) Recommended Chart: 5-minute timeframe on NIFTY Futures or major index stocks. 🔹 1. Identify Trend Alignment When Score ≥ +3 → Market bias is bullish. → Look for long entries (buy breakouts or EMA retests). When Score ≤ −3 → Market bias is bearish. → Look for short entries (sell breakdowns or retests). When Score is between −2 and +2 → Trend is mixed. → Best to wait — avoid trading in choppy conditions. 🔹 2. Combine with Price Action Use it with: Trendline breaks or retests Candle confirmation (e.g. bullish engulfing or rejection) Volume surge Example: On NIFTY 5m — if score = +5, price breaks above a descending trendline, and 1m–15m EMAs are all rising → strong long signal. 🔹 3. Avoid Conflicts If lower timeframes (1m/3m/5m) are bullish but higher ones (30m/60m) are bearish, → Trend is short-term bullish but larger bias is down — scalps only, not swings. Optional Alerts If you add alert conditions (as suggested earlier): “Strong Bullish Alignment” triggers when score ≥ +5 “Strong Bearish Alignment” triggers when score ≤ −5 This gives you early alerts when full trend alignment occurs — ideal for breakout setups. Some more Tips Use 5m or 15m chart as your main view. Use Stack Score as a trend filter — trade with it, not against it. Combine with Breakout + Retest strategy or Trendline color-coded system you’re building. In sideways days (score near 0), reduce risk or skip trades.
Indikator Pine Script®
oleh Just-a-Trader
Best Time Slots — Auto-Adapt (v6, TF-safe) + Range AlertsTime & binning Auto-adapt to timeframe Makes all time windows scale to your chart’s bar size (so it “just works” on 1m, 15m, 4H, Daily). • On = recommended. • Off = fixed default lengths. Minimum Bin (minutes) The size of each daily time slot we track (e.g., 5-min bins). The script uses the larger of this and your bar size. • Higher = fewer, broader slots; smoother stats. • Lower = more, narrower slots; needs more history. • Try: 5–15 on intraday, 60–240 on higher TFs. Lookback windows (used when Auto-adapt = ON) Target ER Window (minutes) How far back we look to judge Efficiency Ratio (how “straight” the move was). • Higher = stricter/smoother; fewer bars qualify as “movement”. • Lower = more sensitive. • Try: 60–120 min intraday; 240–600 min for higher TFs. Target ATR Window (minutes) How far back we compute ATR (typical range). • Higher = steadier ATR baseline. • Lower = reacts faster. • Try: 30–120 min intraday; 240–600 min higher TFs. Target Normalization Window (minutes) How far back for the average ATR (the baseline we compare to). • Higher = stricter “above average range” check. • Lower = easier to pass. • Try: ~500–1500 min. What counts as “movement” ER Threshold (0–1) Minimum efficiency a bar must have to count as movement. • Higher = only very “clean, one-direction” bars count. • Lower = more bars count. • Try: 0.55–0.65. (0.60 = balanced.) ATR Floor vs SMA(ATR) Requires range to be at least this many × average ATR. • Higher (e.g., 1.2) = demand bigger-than-usual ranges. • Lower (e.g., 0.9) = allow smaller ranges. • Try: 1.0 (above average). How history is averaged Recent Days Weight (per-day decay) Gives more weight to recent days. Example: 0.97 ≈ each day old counts ~3% less. • Higher (0.99) = slower fade (older days matter more). • Lower (0.95) = faster fade. • Try: 0.97–0.99. Laplace Prior Seen / Laplace Prior Hit “Starter counts” so early stats aren’t crazy when you have little data. • Higher priors = probabilities start closer to average; need more real data to move. • Try: Seen=3, Hit=1 (defaults). Min Samples (effective) Don’t highlight a slot unless it has at least this many effective samples (after decay + priors). • Higher = safer, but fewer highlights early. • Try: 3–10. When to highlight on the chart Min Probability to Highlight We shade/mark bars only if their slot’s historical movement probability is ≥ this. • Higher = pickier, fewer highlights. • Lower = more highlights. • Try: 0.45–0.60. Show Markers on Good Bins Draws a small square on bars that fall in a “good” slot (in addition to the soft background). Limit to market hours (optional) Restrict to Session + Session Only learn/score inside this time window (e.g., “0930-1600”). Uses the chart/exchange timezone. • Turn on if you only care about RTH. Range (chop) alerts Range START if ER ≤ Triggers range when efficiency drops below this level (price starts zig-zagging). • Higher = easier to call “range”. • Lower = stricter. Range START if ATR ≤ this × SMA(ATR) Also triggers range when ATR shrinks below this fraction of its average (volatility contraction). • Higher (e.g., 1.0) = stricter (must be at/under average). • Lower (e.g., 0.9) = easier to call range. Alerts on bar close If ON, alerts fire once per bar close (cleaner). If OFF, they can trigger intrabar (faster, noisier). Quick “what happens if I change X?” Want more highlighted times? ↓ Min Probability, ↓ ER Threshold, or ↓ ATR Floor (e.g., 0.9). Want stricter highlights? ↑ Min Probability, ↑ ER Threshold, or ↑ ATR Floor (e.g., 1.2). Want recent days to matter more? ↑ Recent Days Weight toward 0.99. On 4H/Daily, widen Minimum Bin (e.g., 60–240) and maybe lower Min Probability a bit.
Indikator Pine Script®
oleh hfdavid
Ripster Clouds (EMA + MTF)v6🧠 Purpose This indicator combines Ripster EMA Clouds and Multi-Timeframe (MTF) EMA Clouds into one script. It allows you to visualize short vs long exponential (or simple) moving averages as colored “clouds” to identify trend direction and momentum — across both your current timeframe and a higher timeframe (e.g., daily). ⚙️ Main Features 1. EMA Clouds (Local Timeframe) Up to 5 separate EMA/SMA cloud sets (8/9, 5/12, 34/50, 72/89, 180/200 by default). Each can be individually enabled/disabled in the settings. MA type toggle → Choose between EMA and SMA. Optional line display toggle for showing the short and long MA lines. Color-coded trend clouds: Greenish tones = bullish (short > long) Reddish tones = bearish (short < long) Configurable leading offset and global offset for alignment. 2. MTF Clouds (Higher Timeframe) Two sets of higher timeframe EMA clouds (default: 50/55 and 20/21). Uses request.security() to pull EMA data from a selected higher timeframe (default = Daily). Optional line visibility toggle (Display Lines). Blue and teal semi-transparent fills to distinguish from local clouds. Each MTF cloud can be toggled independently. 3. Unified Controls Master toggles: ✅ Show EMA Clouds ✅ Show MTF Clouds Transparent cloud fills with dynamically changing colors based on EMA crossovers and slope. No local-scope plot() or fill() calls — fully compliant with Pine v6 rules. 🎨 Color Logic Each EMA cloud uses a unique color pair (5 total). Cloud color changes dynamically based on whether the short EMA is above or below the long EMA. Line color changes with slope: Olive = EMA rising Maroon = EMA falling 📊 Technical Structure Written in Pine Script v6. All plot() and fill() calls are at global scope to prevent compilation errors. Uses helper functions only for math/color logic. Performance-optimized for TradingView’s rendering limits. 🧩 Quick Setup in TradingView Paste the script into the Pine Editor. Add to chart. In settings: Toggle on/off any EMA or MTF clouds. Adjust timeframe (Resolution), line visibility, or offsets. Choose EMA or SMA as the base calculation. ✅ Result You now have one unified, customizable Ripster EMA + MTF Cloud indicator, stable in Pine v6, with complete flexibility to toggle, style, and analyze multiple timeframe trends on a single chart.
Indikator Pine Script®
oleh chandrashekar_thippani
Tri-Align Crypto Trend (EMA + Slope)**Tri-Align Crypto Trend (EMA + Slope)** Quickly see whether your coin is trending *with* Bitcoin. The indicator evaluates three pairs—**COIN/USDT**, **BTC/USDT**, and **COIN/BTC**—using a fast/slow EMA crossover plus the fast EMA’s slope. Each pair is tagged **Bullish / Bearish / Neutral** in a compact, color-coded table. Alerts fire when **all three** trends align (all bullish or all bearish). **How to use** 1. Add the indicator to any crypto chart. 2. Set the three symbols (defaults: BNB/USDT, BTC/USDT, BNB/BTC) and optionally choose a signal timeframe. 3. Tune **Fast EMA**, **Slow EMA**, **Slope Lookback**, and **Min |Slope| %** to filter noise and require stronger momentum. 4. Create alerts: *Add alert →* choose the indicator and select **All Three Bullish**, **All Three Bearish**, or **All Three Aligned**. **Logic** * Bullish: `EMA_fast > EMA_slow` **and** fast EMA slope ≥ threshold * Bearish: `EMA_fast < EMA_slow` **and** fast EMA slope ≤ −threshold * Otherwise: Neutral Tip: The **COIN/BTC** row reflects relative strength vs BTC—use it to avoid chasing coins that lag the benchmark. (For educational purposes; not financial advice.)
Indikator Pine Script®
oleh Frey_Crypto
Tri-Align Crypto Trend (EMA + Slope)**Tri-Align Crypto Trend (EMA + Slope)** Quickly see whether your coin is trending *with* Bitcoin. The indicator evaluates three pairs—**COIN/USDT**, **BTC/USDT**, and **COIN/BTC**—using a fast/slow EMA crossover plus the fast EMA’s slope. Each pair is tagged **Bullish / Bearish / Neutral** in a compact, color-coded table. Alerts fire when **all three** trends align (all bullish or all bearish). **How to use** 1. Add the indicator to any crypto chart. 2. Set the three symbols (defaults: BNB/USDT, BTC/USDT, BNB/BTC) and optionally choose a signal timeframe. 3. Tune **Fast EMA**, **Slow EMA**, **Slope Lookback**, and **Min |Slope| %** to filter noise and require stronger momentum. 4. Create alerts: *Add alert →* choose the indicator and select **All Three Bullish**, **All Three Bearish**, or **All Three Aligned**. **Logic** * Bullish: `EMA_fast > EMA_slow` **and** fast EMA slope ≥ threshold * Bearish: `EMA_fast < EMA_slow` **and** fast EMA slope ≤ −threshold * Otherwise: Neutral Tip: The **COIN/BTC** row reflects relative strength vs BTC—use it to avoid chasing coins that lag the benchmark. (For educational purposes; not financial advice.)
Indikator Pine Script®
oleh Frey_Crypto
Percentile Rank Oscillator (Price + VWMA)A statistical oscillator designed to identify potential market turning points using percentile-based price analytics and volume-weighted confirmation. What is PRO? Percentile Rank Oscillator measures how extreme current price behavior is relative to its own recent history. It calculates a rolling percentile rank of price midpoints and VWMA deviation (volume-weighted price drift). When price reaches historically rare levels – high or low percentiles – it may signal exhaustion and potential reversal conditions. How it works Takes midpoint of each candle ((H+L)/2) Ranks the current value vs previous N bars using rolling percentile rank Maps percentile to a normalized oscillator scale (-1..+1 or 0–100) Optionally evaluates VWMA deviation percentile for volume-confirmed signals Highlights extreme conditions and confluence zones Why percentile rank? Median-based percentiles ignore outliers and read the market statistically – not by fixed thresholds. Instead of guessing “overbought/oversold” values, the indicator adapts to current volatility and structure. Key features Rolling percentile rank of price action Optional VWMA-based percentile confirmation Adaptive, noise-robust structure User-selectable thresholds (default 95/5) Confluence highlighting for price + VWMA extremes Optional smoothing (RMA) Visual extreme zone fills for rapid signal recognition How to use High percentile values –> statistically extreme upward deviation (potential top) Low percentile values –> statistically extreme downward deviation (potential bottom) Price + VWMA confluence strengthens reversal context Best used as part of a broader trading framework (market structure, order flow, etc.) Tip: Look for percentile spikes at key HTF levels, after extended moves, or where liquidity sweeps occur. Strong moves into rare percentile territory may precede mean reversion. Suggested settings Default length: 100 bars Thresholds: 95 / 5 Smoothing: 1–3 (optional) Important note This tool does not predict direction or guarantee outcomes. It provides statistical context for price extremes to help traders frame probability and timing. Always combine with sound risk management and other tools.
Indikator Pine Script®
oleh exploretranspose
FVG MagicFVG Magic — Fair Value Gaps with Smart Mitigation, Inversion & Auto-Clean-up FVG Magic finds every tradable Fair Value Gap (FVG), shows who powered it, and then manages each gap intelligently as price interacts with it—so your chart stays actionable and clean. Attribution This tool is inspired by the idea popularized in “Volumatic Fair Value Gaps ” by BigBeluga (licensed CC BY-NC-SA 4.0). Credit to BigBeluga for advancing FVG visualization in the community. Important: This is a from-scratch implementation—no code was copied from the original. I expanded the concept substantially with a different detection stack, a gap state machine (ACTIVE → 50% SQ → MITIGATED → INVERSED), auto-clean up rules, lookback/nearest-per-side pruning, zoom-proof volume meters, and timeframe auto-tuning for 15m/H1/H4. What makes this version more accurate Full-coverage detection (no “missed” gaps) Default ICT-minimal rule (Bullish: low > high , Bearish: high < low ) catches all valid 3-candle FVGs. Optional Strict filter (stricter structure checks) for traders who prefer only “clean” gaps. Optional size percentile filter—off by default so nothing is hidden unless you choose to filter. Correct handling of confirmations (wick vs close) Mitigation Source is user-selectable: high/low (wick-based) or close (strict). This avoids false “misses” when you expect wick confirmations (50% or full fill) but your logic required closes. State-aware labelling to prevent misleading data The Bull%/Bear% meter is shown only while a gap is ACTIVE. As soon as a gap is 50% SQ, MITIGATED, or INVERSED, the meter is hidden and replaced with a clear tag—so you never read stale participation stats. Robust zoom behaviour The meter uses a fixed bar-width (not pixels), so it stays proportional and readable at any zoom level. Deterministic lifecycle (no stale boxes) Remove on 50% SQ (instant or delayed). Inversion window after first entry: if price enters but doesn’t invert within N bars, the box auto-removes once fully filled. Inversion clean up: after a confirmed flip, keep for N bars (context) then delete (or 0 = immediate). Result: charts auto-maintain themselves and never “lie” about relevance. Clarity near current price Nearest-per-side (keep N closest bullish & bearish gaps by distance to the midpoint) focuses attention where it matters without altering detection accuracy. Lookback (bars) ensures reproducible behaviour across accounts with different data history. Timeframe-aware defaults Sensible auto-tuning for 15m / H1 / H4 (right-extension length, meter width, inversion windows, clean up bars) to reduce setup friction and improve consistency. What it does (under the hood) Detects FVGs using ICT-minimal (default) or a stricter rule. Samples volume from a 10× lower timeframe to split participation into Bull % / Bear % (sum = 100%). Manages each gap through a state machine: ACTIVE → 50% SQ (midline) → MITIGATED (full) → INVERSED (SR flip after fill). Auto-clean up keeps only relevant levels, per your rules. Dashboard (top-right) displays counts by side and the active state tags. How to use it First run (show everything) Use Strict FVG Filter: OFF Enable Size Filter (percentile): OFF Mitigation Source: high/low (wick-based) or close (stricter), as you prefer. Remove on 50% SQ: ON, Delay: 0 Read the context While ACTIVE, use the Bull%/Bear% meter to gauge demand/supply behind the impulse that created the gap. Confluence with your HTF structure, sessions, VWAP, OB/FVG, RSI/MACD, etc. Trade interactions 50% SQ: often the highest-quality interaction; if removal is ON, the box clears = “job done.” Full mitigation then rejection through the other side → tag changes to INVERSED (acts like SR). Keep for N bars, then auto-remove. Keep the chart tidy (optional) If too busy, enable Size Filter or set Nearest per side to 2–4. Use Lookback (bars) to make behaviour consistent across symbols and histories. Inputs (key ones) Use Strict FVG Filter: OFF(default)/ON Enable Size Filter (percentile): OFF(default)/ON + threshold Mitigation Source: high/low or close Remove on 50% SQ + Delay Inversion window after entry (bars) Remove inversed after (bars) Lookback (bars), Nearest per side (N) Right Extension Bars, Max FVGs, Meter width (bars) Colours: Bullish, Bearish, Inversed fill Suggested defaults (per TF) 15m: Extension 50, Max 12, Inversion window 8, Clean up 8, Meter width 20 H1: Extension 25, Max 10, Inversion window 6, Clean up 6, Meter width 15 H4: Extension 15, Max 8, Inversion window 5, Clean up 5, Meter width 10 Notes & edge cases If a wick hits 50% or the far edge but state doesn’t change, you’re likely on close mode—switch to high/low for wick-based behaviour. If a gap disappears, it likely met a clean up condition (50% removal, inversion window, inversion clean up, nearest-per-side, lookback, or max-cap). Meters are hidden after ACTIVE to avoid stale percentages.
Indikator Pine Script®
oleh OakleyJM
2
Rolling Correlation vs Another Symbol (SPY Default)This indicator visualizes the rolling correlation between the current chart symbol and another selected asset, helping traders understand how closely the two move together over time. It calculates the Pearson correlation coefficient over a user-defined period (default 22 bars) and plots it as a color-coded line: • Green line → positive correlation (move in the same direction) • Red line → negative correlation (move in opposite directions) • A gray dashed line marks the zero level (no correlation). The background highlights periods of strong relationship: • Light green when correlation > +0.7 (strong positive) • Light red when correlation < –0.7 (strong negative) Use this tool to quickly spot diversification opportunities, confirm hedges, or understand how assets interact during different market regimes.
Indikator Pine Script®
oleh EuerMarit