Black FridayDISKON hingga 80%

Cari skrip untuk "机械革命无界15+时不时闪屏"

KK_Intraday MAsHey guys, today I was browsing through intraday Charts looking at some moving averages. Basically what I wanted to see was whether the currency pair was trading below or above the moving average of the day/week/month. For a better understanding: The daily MA on a 15 minute Forex Chart would be the 96 MA. I encountered the problem that i always had to change the settings for my MAs when changing the Time Interval, so I coded this here up. It is pretty simple but maybe somebody else has the same problem and can put it to use. The script has some settings as listed below: Choice which MAs to plot, (Daily, Weekly, Monthly) Choice which type of MA to use (Simple, Exponential, Weighted) Neccesary Settings for the correct calculation (e.g. Number of trading hours per day). These settings depend on the instrument you are using and should always be checked before using this script. There are a few things to Note when using this script: This script works for intraday charts only. The monthly MA doesn't work on any Time Interval smaller than 15 minutes. Can't do anything about it unfortunately. This is my first published Script, use it with caution and let me know what you think about it!
Indikator Pine Script®
oleh Kurbelklaus
2
Opening Range Breakout with 2 Profit Targets.Opening Range Breakout with 2 Profit Targets. Updated Indicator now works on all Symbols with Many Different Session Options. ***Known PineScript Issue…While the Opening Range is being Formed the lines only adjust for that individual bar. Just reset Indicator after Opening Range Completes. ***All Times are Based on New York Time Session Options Forex U.S. Banks Open (8:00), Gold U.S. Open (8:20), Oil U.S. Open (9:00), U.S. Cash Session - Stocks (9:30), NY Forex Open (17:00) , Europe Open (02:00), or if you choose Setting 0 the Session Runs from 00:00 to 00:00 (Midnight to Midnight). ***Ability to use 60 minute Opening Range, 30 minute, 15 minute, and many other options. ***However you can manually change the times in the Inputs Tab to adjust for any session you prefer. This is useful for Day Light Savings Adjustments. Also the default times work if your charts are set to EST Time. If you use A different time zone in your settings you need to Adjust the times in the inputs tab. Initially Opening Range High and Low plot as Yellow Lines. If Price Goes Above Opening Range then Line Turns Green. If Price Goes Below Opening Range Line Turns Red. By default the First Profit Target is 1/2 the Width of the Opening Range and the 2nd Profit Target is 1 Times the Opening Range. However these are Adjustable in the Inputs Tab. By Default the Opening Range Length is 1 Hour. However, you can Change the Opening Range Length to 15 min, 30 min, 2 hours etc. in the Inputs Tab. Plots a 1 Above or Below Candle when 1st Profit Target is Achieved, and a 2 when 2nd Profit Target is Achieved.
Indikator Pine Script®
oleh ChrisMoody
91
Indicator: Trend Trigger FactorIntroduced by M.H.Pee, Trend Trigger Factor is designed to keep the trader trading with the trend. System rules according to the developer: * If the 15-day TTF is above 100 (indicating an uptrend), you will want to be in long positions. * If the 15-day TTF is below -100, you will want to be short. * If it is between -100 and 100, you should remain with the current position. More info: Original Article by Mr.Pee: drive.google.com
Indikator Pine Script®
oleh LazyBear
15
Two Supertrend Crossover SignalThis indicator is designed to visualize trend shifts using two Supertrend lines and a crossover-based signal system. It also colors the area between the two Supertrend lines based on the current trend direction, making trend changes easy to identify at a glance. How It Works The indicator plots: Fast Supertrend (shorter ATR length, lower factor) Slow Supertrend (longer ATR length, higher factor) A crossover between these two Supertrend lines indicates a possible trend shift. Buy Signal A BUY signal occurs when: Fast Supertrend crosses ABOVE Slow Supertrend This suggests bullish momentum strengthening. Sell Signal A SELL signal occurs when: Fast Supertrend crosses BELOW Slow Supertrend This suggests bearish momentum increasing. Buy/Sell Signal Labels The chart displays clear BUY (green) and SELL (red) labels at every crossover. These signals help traders quickly pinpoint potential entries or exits. This indicator is ideal for: ✓ Trend trading ✓ Swing trading ✓ Identifying momentum shifts ✓ Visual confirmation of market direction ✓ Combining with price action or EMA filters You may adjust ATR length and multiplier depending on the timeframe: For Scalping (1–5 min): Fast ATR: 5–7 Slow ATR: 10–14 For Intraday (5–15 min): Fast ATR: 7 Slow ATR: 10–14 For Swing Trading (1h–4h): Fast ATR: 10 Slow ATR: 20 Important Notes This indicator does not repaint the Supertrend values. Signals are based on confirmed crossovers. Use stop-loss and risk management appropriate for your strategy. Always combine with market context (support/resistance, volume, etc.)
Indikator Pine Script®
oleh ChandraBose2002
BOS/CHOCH Demand & SupplyThis indicator automatically identifies and plots Supply and Demand zones based on Smart Money Concepts (SMC) methodology. It detects structural breaks in price action and marks the origin zones that initiated these moves. How It Works (Technical Methodology) 1. Swing Point Detection The indicator uses Pine Script's ta.pivothigh() and ta.pivotlow() functions to identify swing highs and lows. Users can input multiple lookback periods (e.g., 1, 2, 3, 5, 11, 15, 20) to detect structure across different timeframe perspectives simultaneously. 2. Break of Structure (BOS) Detection A Bullish BOS is confirmed when: Current candle closes above the last swing high Previous candle's high was still below that swing high The current swing high is higher than the previous swing high (trend continuation) A Bearish BOS is confirmed when: Current candle closes below the last swing low Previous candle's low was still above that swing low The current swing low is lower than the previous swing low (trend continuation) 3. Change of Character (CHOCH) Detection A Bullish CHOCH is confirmed when: Price breaks above the last swing high But that swing high was lower than the previous swing high (potential reversal signal) A Bearish CHOCH is confirmed when: Price breaks below the last swing low But that swing low was higher than the previous swing low (potential reversal signal) 4. Inducement / Liquidity Grab Filter (Optional) When enabled, zones are only drawn if the swing point that created them first grabbed liquidity from the previous swing: For Demand zones: The swing low must have traded below the previous swing low before the bullish break For Supply zones: The swing high must have traded above the previous swing high before the bearish break This filter helps identify higher-probability zones where stop-losses were likely triggered before the move. 5. Zone Construction Demand Zone (Bullish): Top boundary: max(open, close) of the swing low candle Bottom boundary: low of the swing low candle Supply Zone (Bearish): Top boundary: high of the swing high candle Bottom boundary: min(open, close) of the swing high candle This captures the candle body-to-wick range where institutional orders likely reside. 6. Zone Lifecycle Management Active Zone: Displayed in green (demand) or red (supply) Mitigated Zone: When price touches the zone but doesn't break it, the zone turns gray (indicating partial fill) Broken Zone: When price fully breaks through the zone, it is automatically deleted from the chart How to Use Demand Zones (Green): Look for long entries when price returns to these zones. The zone represents where buying pressure previously overcame selling. Supply Zones (Red): Look for short entries when price returns to these zones. The zone represents where selling pressure previously overcame buying. BOS Zones: Indicate trend continuation - trade in the direction of the break. CHOCH Zones: Indicate potential reversal - these are early warning signals of trend change. Enable "Require Inducement" for higher-quality setups where liquidity was grabbed before the structural break. Multi-Lookback Periods: Using multiple values helps identify zones across different structural levels. Smaller values catch minor structure; larger values catch major structure. Disclaimer This indicator is a technical analysis tool and should be used in conjunction with other forms of analysis. Past performance does not guarantee future results. Always use proper risk management.
Indikator Pine Script®
oleh s3u1l
Smart Margin Zone SMART MARGIN ZONE - CME-BASED SUPPORT & RESISTANCE INDICATOR TITLE FOR PUBLICATION: Smart Margin Zone - CME Margin-Based Support and Resistance CATEGORY: Support and Resistance SHORT DESCRIPTION (for preview): Automatically plots margin zones based on CME Group requirements. These zones represent critical price levels where leveraged traders face margin calls, creating natural support and resistance through forced liquidations. ═══════════════════════════════════════════════════════════════ FULL DESCRIPTION FOR TRADINGVIEW: ═══════════════════════════════════════════════════════════════ 📊 Smart Margin Zone - Professional Trading Zones Based on CME Data This indicator automatically calculates and displays margin zones derived from official CME Group margin requirements. These zones represent critical price levels where traders using leverage receive margin calls, triggering forced position closures that create natural support and resistance levels. ═══════════════════════════════════════════════════════════════ 🎯 CORE CONCEPT ═══════════════════════════════════════════════════════════════ When price reaches calculated margin zones, traders using 2:1 or 4:1 leverage on CME futures receive margin calls. Brokers automatically liquidate these positions, creating waves of buying or selling pressure that form strong support and resistance levels. This is not theoretical - it's based on actual margin requirements from CME Group, the world's largest derivatives marketplace. ═══════════════════════════════════════════════════════════════ 📐 CALCULATION METHODOLOGY ═══════════════════════════════════════════════════════════════ The indicator uses the following formula to calculate zone sizes: Zone Size = (Margin Requirement / Tick Value) × Tick Size × 1.10 Where: • Margin Requirement = Official CME initial margin (updated November 2024) • Tick Value = Dollar value of minimum price movement • Tick Size = Minimum price increment • 1.10 = 10% buffer for realistic zone width SUPPORTED INSTRUMENTS WITH CME DATA: Currency Pairs: • EURUSD: $2,100 margin → 0.0168 zone size • GBPUSD: $1,800 margin → 0.0144 zone size • AUDUSD: $1,300 margin → 0.0065 zone size • NZDUSD: $1,100 margin → 0.0055 zone size • USDJPY: $3,200 margin → custom calculation • USDCAD: $950 margin → calculated • USDCHF: $1,650 margin → calculated Commodities: • Gold (XAUUSD): $8,000 margin → 80 points zone size • Silver (XAGUSD): $6,500 margin → calculated • WTI Crude Oil: $4,500 margin → calculated ═══════════════════════════════════════════════════════════════ 🔍 HOW IT WORKS ═══════════════════════════════════════════════════════════════ 1. SWING POINT DETECTION The indicator automatically identifies swing highs and swing lows using a configurable lookback period (default 10 bars). These become anchor points for zone calculations. 2. FIVE ZONE LEVELS From each swing point, five zone levels are calculated: • Zone 1/4 (25%) - First correction level • Zone 1/2 (50%) - KEY ZONE for trend determination • Zone 3/4 (75%) - Intermediate level • Zone 1/1 (100%) - Full margin zone (strongest level) • Zone 5/4 (125%) - Extended zone 3. TREND IDENTIFICATION • Close above Zone 1/2 resistance = Bullish trend • Close below Zone 1/2 support = Bearish trend • Between zones = Range/consolidation 4. HISTORICAL CONTEXT Current zones are displayed prominently with fills and labels. Historical zones appear as thin, semi-transparent lines for context without cluttering the chart. ═══════════════════════════════════════════════════════════════ ⚙️ FEATURES ═══════════════════════════════════════════════════════════════ AUTOMATED CALCULATION: ✅ Auto-detection of swing highs and lows ✅ Real-time zone updates as new swings form ✅ CME margin data built-in for major instruments ✅ Manual override option for custom calculations VISUAL CLARITY: ✅ Color-coded zones (red=resistance, green=support) ✅ Adjustable transparency for fills and lines ✅ Current zones bold with fills and price labels ✅ Historical zones thin and transparent ✅ Swing point markers show calculation origins CUSTOMIZATION: ✅ Show/hide individual zone levels (1/4, 1/2, 3/4, 1/1, 5/4) ✅ Toggle historical zones on/off ✅ Adjustable lookback period (5-50 bars) ✅ Customizable colors for all elements ✅ Line width and transparency controls ✅ Zone extension options (none/right/both) TREND ANALYSIS: ✅ Optional trend background coloring ✅ Customizable trend colors and transparency ✅ Real-time trend identification display STATISTICS: ✅ Live statistics table showing: - Current instrument - Active zone size - Calculation mode - Current trend direction - Number of zones displayed ALERTS: ✅ Zone 1/2 breakout (up/down) ✅ Full margin zone 1/1 reached ✅ Customizable alert messages ═══════════════════════════════════════════════════════════════ 📈 TRADING APPLICATIONS ═══════════════════════════════════════════════════════════════ ENTRY SIGNALS: • Bounces from zone levels = potential entry points • Zone 1/2 breakouts = trend continuation entries • Zone rejections = reversal opportunities RISK MANAGEMENT: • Zone levels = logical stop-loss placement • Zone 1/1 = maximum risk level • Zone spacing = position sizing guide PROFIT TARGETS: • Next zone level = first target • Zone 1/1 = full profit target • Zone breakouts = extended targets TREND CONFIRMATION: • Price above Zone 1/2 resistance = confirmed uptrend • Price below Zone 1/2 support = confirmed downtrend • Consolidation between zones = wait for breakout ═══════════════════════════════════════════════════════════════ 📚 USAGE INSTRUCTIONS ═══════════════════════════════════════════════════════════════ GETTING STARTED: 1. Add indicator to chart of any supported instrument 2. Zones automatically calculate and display 3. Adjust swing detection period if needed (default 10 works well) 4. Customize colors and visibility to your preference OPTIMAL SETTINGS: • Best timeframes: H1, H4, Daily, Weekly • Default swing length (10) suitable for most markets • Show 2-3 historical zones for context • Enable swing point markers to see calculation origins INTERPRETATION: • Watch for price reactions at zone boundaries • Strong bounces = respect for margin level • Clean breaks = momentum continuation • Multiple touches = zone strength confirmation SET ALERTS: • Zone 1/2 breakouts for trend entries • Zone 1/1 reaches for profit-taking • Custom alerts for your specific strategy ═══════════════════════════════════════════════════════════════ ⚠️ IMPORTANT NOTES ═══════════════════════════════════════════════════════════════ DATA ACCURACY: • CME margin requirements updated November 2024 • Margins change periodically - check CME Group website • Manual mode available for latest margin data • Indicator provides analysis tool, not financial advice STATISTICAL PERFORMANCE: • Historical data shows >60% probability of continued movement after Zone 1/2 breakout • Zone effectiveness varies by market conditions • Best results in trending markets with clear swings LIMITATIONS: • Margin requirements change - monitor CME updates • Works best on liquid instruments with clear swings • Not a standalone trading system • Should be combined with additional analysis ═══════════════════════════════════════════════════════════════ 🔧 METHODOLOGY CREDIT ═══════════════════════════════════════════════════════════════ This indicator is based on the margin zones concept developed by Alexander Bazylev (BTrade indicator for MetaTrader platforms). The TradingView implementation has been completely rewritten with original enhancements: • Multiple zone levels instead of single level • Automatic swing point detection algorithm • Direct CME data integration • Historical zone visualization • Advanced customization options • Comprehensive statistics and alerts All code is original and specifically designed for TradingView's Pine Script v5 environment. ═══════════════════════════════════════════════════════════════ 💡 BEST PRACTICES ═══════════════════════════════════════════════════════════════ COMBINE WITH: • Volume analysis for confirmation • Trend indicators for direction bias • Price action patterns at zones • Higher timeframe analysis AVOID: • Trading against strong trends at minor zones • Over-leveraging based solely on zone placement • Ignoring broader market context • Expecting perfect bounces every time OPTIMIZE: • Adjust swing length for different timeframes • Shorter period (5-7) for intraday trading • Longer period (15-20) for swing trading • Test historical effectiveness on your instruments ═══════════════════════════════════════════════════════════════ 📖 EDUCATIONAL VALUE ═══════════════════════════════════════════════════════════════ This indicator helps traders understand: • How institutional margin requirements affect price • Where forced liquidations create pressure • Natural support and resistance formation • Relationship between leverage and price levels • Market structure and key technical levels ═══════════════════════════════════════════════════════════════ 🔄 VERSION HISTORY ═══════════════════════════════════════════════════════════════ Version 1.0 (Initial Release): • CME-based zone calculation for 10 instruments • Automatic swing high/low detection • 5 zone levels with customizable display • Historical zones with transparency control • Swing point markers • Trend background indicator • Live statistics table • Multiple alert conditions • Fully customizable colors and styles • English language interface ═══════════════════════════════════════════════════════════════ 📞 SUPPORT & FEEDBACK ═══════════════════════════════════════════════════════════════ Questions or suggestions? Leave a comment below! If you find this indicator useful: ⭐ Please leave a like 💬 Share your experience in comments 🔔 Follow for updates and new indicators ═══════════════════════════════════════════════════════════════ ⚖️ DISCLAIMER ═══════════════════════════════════════════════════════════════ This indicator is provided for educational and analytical purposes only. It is not financial advice and should not be the sole basis for trading decisions. • Past performance does not guarantee future results • Trading involves substantial risk of loss • CME margin requirements subject to change • Always do your own research and risk management • Consult a financial advisor for investment advice The creator is not responsible for any trading losses incurred through use of this indicator.
Indikator Pine Script®
oleh Smart-Day-Trader
Relative Performance Areas [LuxAlgo]The Relative Performance Areas tool enables traders to analyze the relative performance of any asset against a user-selected benchmark directly on the chart, session by session. The tool features three display modes for rescaled benchmark prices, as well as a statistics panel providing relevant information about overperforming and underperforming streaks. 🔶 USAGE Usage is straightforward. Each session is highlighted with an area displaying the asset price range. By default, a green background is displayed when the asset outperforms the benchmark for the session. A red background is displayed if the asset underperforms the benchmark. The benchmark is displayed as a green or red line. An extended price area is displayed when the benchmark exceeds the asset price and is set to SPX by default, but traders can choose any ticker from the settings panel. Using benchmarks to compare performance is a common practice in trading and investing. Using indexes such as the S&P 500 (SPX) or the NASDAQ 100 (NDX) to measure our portfolio's performance provides a clear indication of whether our returns are above or below the broad market. As the previous chart shows, if we have a long position in the NASDAQ 100 and buy an ETF like QQQ, we can clearly see how this position performs against BTSUSD and GOLD in each session. Over the last 15 sessions, the NASDAQ 100 outperformed the BTSUSD in eight sessions and the GOLD in six sessions. Conversely, it underperformed the BTCUSD in seven sessions and the GOLD in nine sessions. 🔹 Display Mode The display mode options in the Settings panel determine how benchmark performance is calculated. There are three display modes for the benchmark: Net Returns: Uses the raw net returns of the benchmark from the start of the session. Rescaled Returns: Uses the benchmark net returns multiplied by the ratio of the benchmark net returns standard deviation to the asset net returns standard deviation. Standardized Returns: Uses the z-score of the benchmark returns multiplied by the standard deviation of the asset returns. Comparing net returns between an asset and a benchmark provides traders with a broad view of relative performance and is straightforward. When traders want a better comparison, they can use rescaled returns. This option scales the benchmark performance using the asset's volatility, providing a fairer comparison. Standardized returns are the most sophisticated approach. They calculate the z-score of the benchmark returns to determine how many standard deviations they are from the mean. Then, they scale that number using the asset volatility, which is measured by the asset returns standard deviation. As the chart above shows, different display modes produce different results. All of these methods are useful for making comparisons and accounting for different factors. 🔹 Dashboard The statistics dashboard is a great addition that allows traders to gain a deep understanding of the relationship between assets and benchmarks. First, we have raw data on overperforming and underperforming sessions. This shows how many sessions the asset performance at the end of the session was above or below the benchmark. Next, we have the streaks statistics. We define a streak as two or more consecutive sessions where the asset overperformed or underperformed the benchmark. Here, we have the number of winning and losing streaks (winning means overperforming and losing means underperforming), the median duration of each streak in sessions, the mode (the number of sessions that occurs most frequently), and the percentages of streaks with durations equal to or greater than three, four, five, and six sessions. As the image shows, these statistics are useful for traders to better understand the relative behavior of different assets. 🔶 SETTINGS Benchmark: Benchmark for comparison Display Mode: Choose how to display the benchmark; Net Returns: Uses the raw net returns of the benchmark. Rescaled Returns: Uses the benchmark net returns multiplied by the ratio of the benchmark and asset standard deviations. Standardized Returns: Uses the benchmark z-score multiplied by the asset standard deviation. 🔹 Dashboard Dashboard: Enable or disable the dashboard. Position: Select the location of the dashboard. Size: Select the dashboard size. 🔹 Style Overperforming: Enable or disable displaying overperforming sessions and choose a color. Underperforming: Enable or disable displaying underperforming sessions and choose a color. Benchmark: Enable or disable displaying the benchmark and choose colors.
Indikator Pine Script®
oleh LuxAlgo
1
100+ BTC Tracker + Sleepy ProxyThis lightweight Pine Script v6 indicator gives you four key on-chain metrics in real time — no paid subscription, no N/A, no NaN, no Glassnode required. What it shows (daily timeframe recommended) Orange line → Number of Bitcoin addresses holding ≥100 BTC right now (Currently ~15,800–16,200 addresses) Blue line → Total BTC sitting in those ≥100 BTC wallets (Currently ~3.1–3.3 million BTC) Purple table row → % of all Bitcoin supply held by long-term holders (Santiment’s LTH metric) (Currently ~68–72%) Teal line & table row → Approximate amount of BTC owned by long-term holders (the best free “sleepy/dormant” proxy) (Currently ~13.5–14.2 million BTC) Data sources (100% free & public – November 2025) ≥100 BTC wallets & supply → CryptoQuant (public symbols) Sleepy proxy → Santiment “% of total supply held by long-term holders” (free tier) Why this matters Watch whale accumulation/distribution in real time See how much Bitcoin is truly “sleeping” (LTH coins rarely move in bear markets) Spot potential supply shocks when the teal line starts dropping fast → long-term holders are selling/waking up Key advantages Works on any free TradingView account No errors, no missing data, no paid add-ons Updates daily (as fast as free on-chain data gets) Super clean table with latest values in the top-right corner Fully open-source and ready to fork/customize
Indikator Pine Script®
oleh bristleconewealth
Kim Lisa – A+ Rejection System (EMA48 + VWAP + TrendSlope)Overview The A+ Rejection System is a price-action–based strategy designed to identify high-quality reversal or continuation setups at dynamic support and resistance levels. It combines the EMA48, VWAP, and a TrendSlope filter to detect moments where price interacts with these levels and immediately rejects them with strong wick-based candles. This strategy focuses on clean market structure, dynamic levels, and wick dominance — without relying on repainting logic or lagging confirmation indicators. 🔍 How the Strategy Works 1. Dynamic Levels The strategy uses two key dynamic levels: EMA48 – short-term dynamic support/resistance VWAP – volume-weighted mean price, used as institutional value anchor Price must touch either EMA48 or VWAP for a valid setup. 2. TrendSlope Requirement The touched level must show an actual slope: Positive or negative slope is allowed Flat levels are filtered out (no trades when EMA48 or VWAP is horizontal) This avoids trading low-quality setups during sideways markets. 3. Rejection Candle Requirements A valid rejection candle must show: A clear wick dominance against the level Body closing away from the level For buys: strong lower wick + bullish close For sells: strong upper wick + bearish close This identifies strong rejection behavior with orderflow imbalance. 4. Trend Filter Instead of using a traditional EMA200 filter, the strategy uses: Price above VWAP → only long setups Price below VWAP → only short setups This allows adaptive trend following in both high- and low-volatility environments. 5. Time Filters (Europe Sessions) Trades are allowed only during: 07:15–13:00 (German morning session) 14:00–18:00 (German afternoon/NY overlap) This avoids low-volume overnight trading. 6. Order Placement For every valid signal: Entry: Long: buy stop above candle high Short: sell stop below candle low Stop-Loss: Based on rejection candle high/low Take-Profit: Fixed Risk-to-Reward 1:2 No pyramiding is used. 📊 What This Strategy Aims to Capture This strategy is designed to capture: Rejections at dynamic institutional levels Pullback entries in ongoing trends Liquidity sweeps into EMA/VWAP followed by reversal Momentum bursts after failed retests It works particularly well on: XAUUSD Indices (NAS100, SP500, DAX) Forex majors Futures micro contracts ⚠️ Important Notes This script does not repaint. Past performance does not guarantee future results. Optimizing RR, time windows, and wick-strength criteria may improve performance depending on the market.
Indikator Pine Script®
oleh Kim_Lisa_Markmann-Garbe
Liquidity Void Zone Detector [PhenLabs]📊 Liquidity Void Zone Detector Version: PineScript™v6 📌 Description The Liquidity Void Zone Detector is a sophisticated technical indicator designed to identify and visualize areas where price moved with abnormally low volume or rapid momentum, creating "voids" in market liquidity. These zones represent areas where insufficient trading activity occurred during price movement, often acting as magnets for future price action as the market seeks to fill these gaps. Built on PineScript v6, this indicator employs a dual-detection methodology that analyzes both volume depletion patterns and price movement intensity relative to ATR. The revolutionary 3D visualization system uses three-layer polyline rendering with adaptive transparency and vertical offsets, creating genuine depth perception where low liquidity zones visually recede and high liquidity zones protrude forward. This makes critical market structure immediately apparent without cluttering your chart. 🚀 Points of Innovation Dual detection algorithm combining volume threshold analysis and ATR-normalized price movement sensitivity for comprehensive void identification Three-layer 3D visualization system with progressive transparency gradients (85%, 78%, 70%) and calculated vertical offsets for authentic depth perception Intelligent state machine logic that tracks consecutive void bars and only renders zones meeting minimum qualification requirements Dynamic strength scoring system (0-100 scale) that combines inverted volume ratios with movement intensity for accurate void characterization Adaptive ATR-based spacing calculation that automatically adjusts 3D layering depth to match instrument volatility Efficient memory management system supporting up to 100 simultaneous void visualizations with automatic array-based cleanup 🔧 Core Components Volume Analysis Engine: Calculates rolling volume averages and compares current bar volume against dynamic thresholds to detect abnormally thin trading conditions Price Movement Analyzer: Normalizes bar range against ATR to identify rapid price movements that indicate liquidity exhaustion regardless of instrument or timeframe Void Tracking State Machine: Maintains persistent tracking of void start bars, price boundaries, consecutive bar counts, and cumulative strength across multiple bars 3D Polyline Renderer: Generates three-layer rectangular polylines with precise timestamp-to-bar index conversion and progressive offset calculations Strength Calculation System: Combines volume component (inverted ratio capped at 100) with movement component (ATR intensity × 30) for comprehensive void scoring 🔥 Key Features Automatic Void Detection: Continuously scans price action for low volume conditions or rapid movements, triggering void tracking when thresholds are exceeded Real-Time Visualization: Creates 3D rectangular zones spanning from void initiation to termination, with color-coded depth indicating liquidity type Adjustable Sensitivity: Configure volume threshold multiplier (0.1-2.0x), price movement sensitivity (0.5-5.0x), and minimum qualifying bars (1-10) for customized detection Dual Color Coding: Separate visual treatment for low liquidity voids (receding red) and high liquidity zones (protruding green) based on 50-point strength threshold Optional Compact Labels: Toggle LV (Low Volume) or HV (High Volume) circular labels at void centers for quick identification without visual clutter Lookback Period Control: Adjust analysis window from 5 to 100 bars to match your trading timeframe and market volatility characteristics Memory-Efficient Design: Automatically manages polyline and label arrays, deleting oldest elements when user-defined maximum is reached Data Window Integration: Plots void detection binary, current strength score, and average volume for detailed analysis in TradingView's data window 🎨 Visualization Three-Layer Depth System: Each void is rendered as three stacked polylines with progressive transparency (85%, 78%, 70%) and calculated vertical offsets creating authentic 3D appearance Directional Depth Perception: Low liquidity zones recede with back layer most transparent; high liquidity zones protrude with front layer most transparent for instant visual differentiation Adaptive Offset Spacing: Vertical separation between layers calculated as ATR(14) × 0.001, ensuring consistent 3D effect across different instruments and volatility regimes Color Customization: Fully configurable base colors for both low liquidity zones (default: red with 80 transparency) and high liquidity zones (default: green with 80 transparency) Minimal Chart Clutter: Closed polylines with matching line and fill colors create clean rectangular zones without unnecessary borders or visual noise Background Highlight: Subtle yellow background (96% transparency) marks bars where void conditions are actively detected in real-time Compact Labeling: Optional tiny circular labels with 60% transparent backgrounds positioned at void center points for quick reference 📖 Usage Guidelines Detection Settings Lookback Period: Default: 10 | Range: 5-100 | Number of bars analyzed for volume averaging and void detection. Lower values increase sensitivity to recent changes; higher values smooth detection across longer timeframes. Adjust based on your trading timeframe: short-term traders use 5-15, swing traders use 20-50, position traders use 50-100. Volume Threshold: Default: 1.0 | Range: 0.1-2.0 (step 0.1) | Multiplier applied to average volume. Bars with volume below (average × threshold) trigger void conditions. Lower values detect only extreme volume depletion; higher values capture more moderate low-volume situations. Start with 1.0 and decrease to 0.5-0.7 for stricter detection. Price Movement Sensitivity: Default: 1.5 | Range: 0.5-5.0 (step 0.1) | Multiplier for ATR-normalized price movement detection. Values above this threshold indicate rapid price changes suggesting liquidity voids. Increase to 2.0-3.0 for volatile instruments; decrease to 0.8-1.2 for ranging or low-volatility conditions. Minimum Void Bars: Default: 10 | Range: 1-10 | Minimum consecutive bars exhibiting void conditions required before visualization is created. Filters out brief anomalies and ensures only sustained voids are displayed. Use 1-3 for scalping, 5-10 for intraday trading, 10+ for swing trading to match your time horizon. Visual Settings Low Liquidity Color: Default: Red (80% transparent) | Base color for zones where volume depletion or rapid movement indicates thin liquidity. These zones recede visually (back layer most transparent). Choose colors that contrast with your chart theme for optimal visibility. High Liquidity Color: Default: Green (80% transparent) | Base color for zones with relatively higher liquidity compared to void threshold. These zones protrude visually (front layer most transparent). Ensure clear differentiation from low liquidity color. Show Void Labels: Default: True | Toggle display of compact LV/HV labels at void centers. Disable for cleaner charts when trading; enable for analysis and review to quickly identify void types across your chart. Max Visible Voids: Default: 50 | Range: 10-100 | Maximum number of void visualizations kept on chart. Each void uses 3 polylines, so setting of 50 maintains 150 total polylines. Higher values preserve more history but may impact performance on lower-end systems. ✅ Best Use Cases Gap Fill Trading: Identify unfilled liquidity voids that price frequently returns to, providing high-probability retest and reversal opportunities when price approaches these zones Breakout Validation: Distinguish genuine breakouts through established liquidity from false breaks into void zones that lack sustainable volume support Support/Resistance Confluence: Layer void detection over key horizontal levels to validate structural integrity—levels within high liquidity zones are stronger than those in voids Trend Continuation: Monitor for new void formation in trend direction as potential continuation zones where price may accelerate due to reduced resistance Range Trading: Identify void zones within consolidation ranges that price tends to traverse quickly, helping to avoid getting caught in rapid moves through thin areas Entry Timing: Wait for price to reach void boundaries rather than entering mid-void, as voids tend to be traversed quickly with limited profit-taking opportunities ⚠️ Limitations Historical Pattern Indicator: Identifies past liquidity voids but cannot predict whether price will return to fill them or when filling might occur No Volume on Forex: Indicator uses tick volume for forex pairs, which approximates but doesn't represent true trading volume, potentially affecting detection accuracy Lagging Confirmation: Requires minimum consecutive bars (default 10) before void is visualized, meaning detection occurs after void formation begins Trending Market Behavior: Strong trends driven by fundamental catalysts may create voids that remain unfilled for extended periods or permanently Timeframe Dependency: Detection sensitivity varies significantly across timeframes; settings optimized for one timeframe may not perform well on others No Directional Bias: Indicator identifies liquidity characteristics but provides no predictive signal for price direction after void detection Performance Considerations: Higher max visible void settings combined with small minimum void bars can generate numerous visualizations impacting chart rendering speed 💡 What Makes This Unique Industry-First 3D Visualization: Unlike flat volume or liquidity indicators, the three-layer rendering with directional depth perception provides instant visual hierarchy of liquidity quality Dual-Mode Detection: Combines both volume-based and movement-based detection methodologies, capturing voids that single-approach indicators miss Intelligent Qualification System: State machine logic prevents premature visualization by requiring sustained void conditions, reducing false signals and chart clutter ATR-Normalized Analysis: All detection thresholds adapt to instrument volatility, ensuring consistent performance across stocks, forex, crypto, and futures without constant recalibration Transparency-Based Depth: Uses progressive transparency gradients rather than colors or patterns to create depth, maintaining visual clarity while conveying information hierarchy Comprehensive Strength Metrics: 0-100 void strength calculation considers both the degree of volume depletion and the magnitude of price movement for nuanced zone characterization 🔬 How It Works Phase 1: Real-Time Detection On each bar close, the indicator calculates average volume over the lookback period and compares current bar volume against the volume threshold multiplier Simultaneously measures current bar's high-low range and normalizes it against ATR, comparing the result to price movement sensitivity parameter If either volume falls below threshold OR movement exceeds sensitivity threshold, the bar is flagged as exhibiting void characteristics Phase 2: Void Tracking & Qualification When void conditions first appear, state machine initializes tracking variables: start bar index, initial top/bottom prices, consecutive bar counter, and cumulative strength accumulator Each subsequent bar with void conditions extends the tracking, updating price boundaries to envelope all bars and accumulating strength scores When void conditions cease, system checks if consecutive bar count meets minimum threshold; if yes, proceeds to visualization; if no, discards the tracking and resets Phase 3: 3D Visualization Construction Calculates average void strength by dividing cumulative strength by number of bars, then determines if void is low liquidity (>50 strength) or high liquidity (≤50 strength) Generates three polyline layers spanning from start bar to end bar and from top price to bottom price, each with calculated vertical offset based on ATR Applies progressive transparency (85%, 78%, 70%) with layer ordering creating recession effect for low liquidity zones and protrusion effect for high liquidity zones Creates optional center label and pushes all visual elements into arrays for memory management Phase 4: Memory Management & Display Continuously monitors polyline array size (each void creates 3 polylines); when total exceeds max visible voids × 3, deletes oldest polylines via array.shift() Similarly manages label array, removing oldest labels when count exceeds maximum to prevent memory accumulation over extended chart history Plots diagnostic data to TradingView’s data window (void detection binary, current strength, average volume) for detailed analysis without cluttering main chart 💡 Note: This indicator is designed to enhance your market structure analysis by revealing liquidity characteristics that aren’t visible through standard price and volume displays. For best results, combine void detection with your existing support/resistance analysis, trend identification, and risk management framework. Liquidity voids are descriptive of past market behavior and should inform positioning decisions rather than serve as standalone entry/exit signals. Experiment with detection parameters across different timeframes to find settings that align with your trading style and instrument characteristics.
Indikator Pine Script®
oleh PhenLabs
VWAP TrendSignalVWAP TrendSignal VWAP (Volume-Weighted Average Price) is the market’s true fair value — the benchmark institutions use to see when price is balanced, extended, or trending with real intent. Price often snaps back when it moves too far (mean reversion), and only shows genuine strength when it holds above or below VWAP. VWAP TrendSignal makes this insight effortless by color-coding VWAP direction: Yellow = VWAP rising → bullish pressure Red = VWAP falling → bearish pressure No bands. No noise. Just pure directional clarity. Anchor VWAP to the Session, Week, Month, Quarter, or Year, and tailor the Slope Smoothing Filter to your timeframe: 1–2 smoothing → fast & reactive (1–5m scalping) 3–5 smoothing → clean & stable (5–15m intraday) 6–10 smoothing → slow flips (1H–4H swings) 10–15 smoothing → macro bias only (Daily/Weekly) The line adapts to how you trade. How to Use It Mean Reversion When price stretches far from VWAP, expect pullbacks or snapbacks. Trend Direction Yellow supports long bias, red supports short bias. Simple, reliable, instantly visible. Balance Zones Price sitting near VWAP = compression, buildup, or chop. A perfect signal to wait or prepare for a breakout. Why It Works VWAP TrendSignal distills institutional logic into a clean, single-line tool. It shows fair value, trend slope, and balance all at once — making your chart clearer and your decisions faster. Once you get used to reading it, trading without it feels blind.
Indikator Pine Script®
oleh traderaven91
2
Keltner Channels BandsKeltner Channels Bands - パブリッシュ用説明文 日本語版 タイトル Keltner Channels Bands (Multi-Timeframe) 説明文 概要 シンプルで視認性の高いケルトナーチャネルインジケーターです。マルチタイムフレーム機能を搭載し、どの時間足でも上位足のケルトナーチャネルを表示できます。 特徴 グレーカラーでチャートを見やすく保持 マルチタイムフレーム対応（デフォルト: 1時間足） 4時間足以上で自動非表示機能（チャートの見やすさを維持） EMAまたはSMAの選択が可能 ATR倍率とバンド幅を自由にカスタマイズ トレードコンセプト ケルトナーチャネルは、価格のボラティリティに基づいたトレンド追従型インジケーターです。 基本的な使い方: トレンド判定: 価格がバンドの上部で推移している場合は上昇トレンド、下部で推移している場合は下降トレンド エントリー: 価格がバンド外に出た後、バンド内に戻るタイミングでトレンド方向へエントリー エグジット: 価格が中心線（MA）に到達、または反対側のバンドに接近した時 ブレイクアウト: バンドを勢いよく突破した場合、新たなトレンドの始まりを示唆 推奨設定: スイングトレード: Length 20, Multiplier 2.2, 1時間足または4時間足 デイトレード: Length 20, Multiplier 2.0, 5分足または15分足で1時間足を表示 注意事項 このインジケーターは単独での使用ではなく、他のテクニカル指標やプライスアクションと組み合わせて使用することを推奨します。 English Version Title Keltner Channels Bands (Multi-Timeframe) Description Overview A simple and visually clean Keltner Channels indicator with multi-timeframe capabilities. Display higher timeframe Keltner Channels on any chart timeframe. Features Clean gray color scheme for better chart visibility Multi-timeframe support (Default: 1-hour) Auto-hide on 4H+ timeframes to maintain chart clarity Choice between EMA or SMA Customizable ATR multiplier and band width Trading Concept Keltner Channels is a volatility-based trend-following indicator that helps traders identify trend direction and potential entry/exit points. Basic Usage: Trend Identification: Price staying near upper band indicates uptrend; near lower band indicates downtrend Entry Signals: Enter in trend direction when price returns inside the bands after moving outside Exit Signals: Consider exits when price reaches the center line (MA) or approaches the opposite band Breakout Trading: Strong momentum breaks through the bands may signal the start of a new trend Recommended Settings: Swing Trading: Length 20, Multiplier 2.2, 1H or 4H timeframe Day Trading: Length 20, Multiplier 2.0, Display 1H channels on 5M or 15M charts Disclaimer This indicator should not be used alone. Combine it with other technical indicators and price action analysis for better trading decisions.
Indikator Pine Script®
oleh pepeperican
FVG HTF# FVG HTF — Higher‑Timeframe Fair Value Gaps ## Summary - Plots higher‑timeframe Fair Value Gap (FVG) zones directly on your current chart. - Tracks fill progress using four methods: Any Touch, Midpoint Reached, Wick Sweep, Body Beyond. - Shows optional labels with timeframe source and live fill percentage; label text color is configurable. - Designed for clean overlays and efficient rendering with limits on graphics and bars processed. ## What It Does - Detects bullish and bearish FVGs from a chosen timeframe (or the chart timeframe) and renders: - Zone Top/Bottom lines and a dotted midpoint line - Semi‑transparent area fill between the edges - Optional label at the midpoint with a tooltip showing zone prices - Continuously updates zones forward and removes them when the selected fill condition is met. ## Inputs - `Enable FVG` (`fvgSH2`): Toggle detection/plotting on/off. - `Timeframe` (`fvgTF2`): Choose `Chart` or HTFs (`5 Minutes`, `15 Minutes`, `1 Hour`, `4 Hours`, `1 Day`, `1 Week`, `1 Month`). - `Fill Method` (`fvgFill2`): - Any Touch — wick or body touches any part of the zone - Midpoint Reached — price reaches at least the 50% of the zone - Wick Sweep — wick fully travels past the far edge and back inside (conceptually stricter than touch) - Body Beyond — candle body closes beyond the opposite edge (strong confirmation) - `Zones` colors (`fvgCb2`, `fvgCs2`): Bullish/Bearish zone colors. - `Labels` (`fvgLB2`): Show/Hide on‑chart labels. - `Label Color` (`fvgLBc2`): Color picker for label text (default: white). - `Max Bars Back` (`maxBars2`): Limits processing to recent bars for performance. ## Timeframe Rules - The helper `htfTF` prevents selecting a timeframe lower than the chart. If an invalid lower TF is chosen, it falls back to `timeframe.period`. - Supports minute, daily, weekly, and monthly aggregations that are safe for intraday/daily/weekly charts. ## Detection Logic - Uses rolling higher‑timeframe bars constructed on the fly and checks 3‑bar displacement patterns: - Bullish FVG: current HTF low above the high two bars ago AND previous HTF close above that high, with no direct gap condition. - Bearish FVG: current HTF high below the low two bars ago AND previous HTF close below that low, with no direct gap condition. - On detection, the script creates an FVG object with: - Top/Bottom lines (`lnTop`, `lnBtm`) and midpoint line (`lnAvg`) - Midpoint label (`lbTxt`) showing source timeframe and updating fill percentage - Semi‑transparent fill (`linefill`) for visual clarity ## Fill Tracking - Fill threshold depends on selected method: - Any Touch: opposite edge - Midpoint Reached: zone’s midpoint - Wick Sweep: stricter condition conceptually (implemented as an opposite‑edge threshold) - Body Beyond: requires close beyond the opposite edge - Each bar updates label x‑position and line endpoints forward; the label text shows the best fill ratio achieved. - When the threshold is reached, the FVG (label, lines, fill) is removed from the chart. ## Best Practices - Start with `Any Touch` to visualize broad repairs; switch to `Body Beyond` for conservative confirmations. - Use `1 Hour` or `4 Hours` overlays on 5m–15m charts for context; `1 Day` on 1H charts; `1 Week` on daily charts. - Keep labels on when monitoring fills intraday; hide labels for clean higher‑level context. - Adjust `Max Bars Back` if performance is impacted by many zones. ## Repainting Notes - HTF zones are computed on `timeframe.change(tf)` and therefore confirm on HTF bar closes. - Label endpoints extend each bar; detection itself avoids lookahead bias. For strict confirmation, align entries with HTF closes. ## Limitations - “Wick Sweep” is treated as a stricter touch to the far edge; it does not enforce a separate “return inside” bar state. - Label text color applies uniformly to bull/bear labels. If you need separate colors per side, contact the author. ## Credits & Version - Pine Script v6; © rithsilanew2020 ## Quick Start 1. Enable FVG and choose your HTF (e.g., `1 Hour`). 2. Pick a Fill Method (start with `Any Touch`). 3. Select zone colors and label text color. 4. Set `Max Bars Back` as needed for performance. 5. Use labels/tooltip values (Top/Mid/Bottom) to plan entries and manage risk.
Indikator Pine Script®
oleh rithsilanew2020
GOLD 5MIN — 9×21 EMA Entry Arrows (Pro Setup)GOLD 5MIN — 9×21 EMA Entry Arrows (Pro Setup) — 2025 Funded Trader Edition The exact same 5-minute gold scalping strategy used daily by multiple 6- and 7-figure funded accounts in 2025. Core Logic (mechanical – no discretion): • Entry only on 9 × 21 EMA crossover • Must be in direction of 50 EMA + 200 EMA trend • Price must close above/below 50 EMA • High-confidence filter: price above 200 EMA + fast 9 EMA rising + elevated volume = big bright “3↑” / “3↓” arrow (full size) • Normal confidence = small “↑” / “↓” arrow (normal or half size) Features: • Automatic dynamic swing stops plotted in real-time (3 ticks beyond prior swing low/high – the exact 2025 stop method that dropped stop-outs from ~65 % to ~31 %) • Clean, high-visibility arrows (large bright for confidence 3, small for normal) • Zero repainting – signals only on bar close • Built for GC1! and MG1! (full and micro gold) on the 5-minute timeframe • Best performance: London open (02:00–04:30 ET) and NY open (09:30–11:30 ET) How to trade: 1. Arrow appears on closed bar → market order in 2. Stop = red dashed line (already drawn) 3. First target 50 % at +20 ticks, move rest to breakeven at +15 ticks, trail with 21 EMA “When the 3↑ hits… the bag follows.” — ASALEH2297
Indikator Pine Script®
oleh asaleh2297
Kim Lisa – A+ Rejection System (EMA48/EMA200 + VWAP) V2Kim Lisa – A+ Rejection System is a precision-based intraday trading tool designed to identify high-probability reversal setups at three key dynamic levels: EMA 48, EMA 200, and VWAP. All three levels act as equal-strength triggers for bullish or bearish rejections. The indicator combines strict candle-based rejection logic with directional trend confirmation and a time-based session filter to highlight only the highest-quality setups. Core Features • Dynamic EMA48, EMA200, and VWAP (fully responsive when zooming) • Equal-weighted rejection triggers at all three levels • Strict rejection candle detection (body position + wick dominance) • Trend filter based on EMA200 and VWAP alignment • Touch detection to ensure the level was actually tested • Session filter for European & US trading hours (07:15–13:00 and 14:00–18:00 CET) • Auto-generated Entry, Stop-Loss, and 1:2 Take-Profit levels • Visual signals: arrows, boxes, SL/TP lines • Alert system for BUY and SELL conditions Purpose This system is built to support structured, consistent, rule-based trading. It filters out weak signals and highlights only the strongest A+ reversal opportunities within the most active trading sessions.
Indikator Pine Script®
oleh Kim_Lisa_Markmann-Garbe
Supply & Demand ZonesThis indicator detects high-probability supply and demand zones using a multi-step smart money concept approach: Liquidity Sweep Detection: Identifies when price sweeps above a pivot high (supply setup) or below a pivot low (demand setup), capturing liquidity grabs by institutional traders. Displacement Confirmation: Requires a strong displacement candle (measured by ATR and body percentage) or fair value gap (FVG/imbalance) in the opposite direction after the sweep. Volume Confirmation: Optional filter ensures zones form only when volume exceeds the user-defined threshold, indicating institutional participation. Smart Filtering: Built-in logic prevents overlapping zones, enforces minimum spacing between signals, and requires confirmation bars to eliminate false signals. Zone Lifecycle Management: Zones are automatically removed when price closes through them with momentum. Breached zones can optionally "flip" to the opposite type when re-tested with strong displacement. ✨ Key Features Clean Visual Display: Small "D" (Demand) and "S" (Supply) labels with shaded zone boxes Non-Repainting: All signals use confirmed historical data—no lookahead or repainting Volume Filter: Optional confirmation using volume spike detection Zone Flip Logic: Breached demand zones can become supply (and vice versa) when violated Overlap Prevention: Smart algorithm prevents clustered or duplicate zones Confirmation Delay: Configurable wait period after sweep to confirm genuine setups Customizable Inputs: Adjust pivot sensitivity, displacement thresholds, volume filters, and more Alert Ready: Built-in alert conditions for new supply and demand zone formations 🎯 How to Add to Your Chart Favorite the Indicator: Click the star icon to add this script to your favorites Open Your Chart: Navigate to the asset and timeframe you want to trade (works best on 5m-1H intraday charts) Add Indicator: Click "Indicators" at the top, search for "Supply & Demand Zones (Smart Filtered)", and add to chart Customize Settings: Click the gear icon ⚙️ to adjust inputs based on your trading style and instrument volatility Set Alerts: Right-click the indicator name → "Add alert" → Select "Supply Zone" or "Demand Zone" conditions 📖 How to Use Demand Zones (Green "D" Labels): Price swept below a swing low (liquidity grab) Strong bullish displacement or imbalance followed Trading Action: Look for LONG entries when price returns to the zone or on immediate continuation Stop Loss: Place just below the zone or sweep low Target: Next resistance level, supply zone, or risk-reward ratio target Supply Zones (Red "S" Labels): Price swept above a swing high (liquidity grab) Strong bearish displacement or imbalance followed Trading Action: Look for SHORT entries when price returns to the zone or on immediate continuation Stop Loss: Place just above the zone or sweep high Target: Next support level, demand zone, or risk-reward ratio target Flipped Zones (Orange Labels): Previous demand/supply zone was broken with strong momentum Zone has flipped polarity and may now act as the opposite type Trading Action: Exercise caution—wait for additional confirmation before trading flipped zones 🔍 What to Look For High-Quality Setups: Zone forms with above-average volume (check volume filter is enabled) Clear liquidity sweep visible on the chart Strong displacement candle with large body percentage Zone aligns with overall market trend or key structure levels Multiple timeframe confirmation (check higher timeframe for context) Avoid These Setups: Zones forming in choppy, low-volume conditions Multiple overlapping zones in the same area (indicator filters these automatically) Zones that appear immediately after news events (set confirmation bars higher) Counter-trend zones without additional confluence ⚙️ Recommended Settings by Timeframe 5-Minute Charts (Scalping): Pivot Lookback: 3/3 Min Displacement ATR: 0.9 Confirmation Bars: 1 Min Zone Spacing: 3-5 bars Volume Threshold: 1.2x 15-Minute Charts (Intraday): Pivot Lookback: 4/4 (default) Min Displacement ATR: 1.0 (default) Confirmation Bars: 2 (default) Min Zone Spacing: 5-8 bars Volume Threshold: 1.2x 1-Hour Charts (Swing Trading): Pivot Lookback: 5/5 Min Displacement ATR: 1.2-1.5 Confirmation Bars: 3 Min Zone Spacing: 8-12 bars Volume Threshold: 1.3x 💡 Trading Tips & Best Practices Combine with Price Action: Use this indicator alongside candlestick patterns, support/resistance, and trendlines for confirmation Multiple Timeframe Analysis: Check higher timeframes for overall bias and major zones Volume is Key: Enable volume filter to focus on institutional-backed moves Risk Management: Always use stop losses and proper position sizing Backtesting: Test settings on your preferred instruments and timeframes before live trading Context Matters: Consider market conditions, news events, and session times Wait for Confirmation: Don't rush entries—wait for price reaction at the zone ⚠️ Important Disclaimers Educational Purpose Only: This indicator is provided for educational and informational purposes. It does not constitute financial advice, investment recommendations, or trading signals. No Guarantees: Past performance and backtested results do not guarantee future results. Trading involves substantial risk of loss.
Indikator Pine Script®
oleh darshakssc
Kim Lisa – A+ Rejection System (EMA48/EMA200 + VWAP)This indicator identifies high-probability reversal setups based on strict rejection rules at three key dynamic levels: EMA 48, EMA 200, and VWAP. It scans the 5-minute chart for strong bullish or bearish rejection candles (body entirely above/below the level with a dominant wick) combined with trend confirmation and a time-based filter. Features: • EMA 48 / EMA 200 / VWAP rejection signals • Trend filter (price vs. EMA200 & VWAP) • Touch detection of EMA/VWAP • Rejection candle logic (strict body & wick conditions) • Automatic Entry, Stop-Loss, and 1:2 Take-Profit levels • Session filter (07:15–13:00 and 14:00–18:00 CET) • Visual boxes, arrows, and alerts for BUY/SELL setups This tool is designed to support structured and consistent intraday trading with clear A+ setups.
Indikator Pine Script®
oleh Kim_Lisa_Markmann-Garbe
HTF Candles Pro by MurshidFx# HTF Candles Pro by MurshidFx ## Professional Trading Indicator for Multi-Timeframe Market Structure Analysis **HTF Candles Pro** is an advanced, open-source trading indicator that synthesizes Higher Timeframe (HTF) candle visualization with CISD (Change in State of Delivery) detection, providing comprehensive market structure analysis across multiple timeframes. Designed for traders at all experience levels—from scalpers to swing traders—this tool enables precise alignment of trades with higher timeframe momentum while identifying critical market structure transitions. --- ## Core Functionality This indicator integrates three essential analytical frameworks: - **HTF Candle Visualization** – Inspired by the innovative work of Fadi x MMT's MTF Candles indicator - **CISD Detection System** – Algorithmic identification of significant market structure reversals - **Intelligent Session Level Management** – Automated consolidation of overlapping session markers for enhanced chart clarity The result is a sophisticated yet streamlined analytical tool that delivers actionable market insights with minimal visual complexity. --- ## Feature Set ### Higher Timeframe Candle Analysis Monitor higher timeframe price action seamlessly without chart switching. The indicator employs automatic HTF selection based on current timeframe, with manual override capability. **Components:** - **Primary HTF Display**: Automatically positioned adjacent to current price action - **Secondary HTF Display**: Optional dual-timeframe analysis capability - **Adaptive Time Labeling**: Context-aware formatting (intraday times, day names, week numbers) - **Real-Time Countdown**: Optional timer displaying remaining time until HTF candle close - **Customizable Color Schemes**: Full color customization for bullish and bearish candles ### CISD Detection (Change in State of Delivery) The CISD system identifies critical inflection points where market structure undergoes directional change, signaling potential trend reversals or continuations. **Mechanism:** - **Market Structure Monitoring**: Continuous tracking of swing highs and lows - **Liquidity Sweep Detection**: Identification of stop-hunt patterns preceding reversals - **Reversal Confirmation**: Validation-based CISD level plotting upon structure break confirmation - **Clear Visual Signals**: Bullish CISD (blue) and bearish CISD (red) demarcation - **Optimized Display**: Default 5-bar line length (adjustable) minimizes chart clutter **Technical Definition:** CISD occurs when price breaches structure in one direction—typically sweeping liquidity and triggering stops—then reverses to break structure in the opposite direction, indicating a fundamental shift in market delivery bias. ### Intelligent Session Level Management Eliminates visual clutter caused by overlapping session opens at identical price levels through automated consolidation. **Functionality:** - **Automatic Consolidation**: Merges multiple concurrent session opens into single reference lines - **Combined Labeling**: Creates unified labels (e.g., "Week-Day Open," "4H-Day-Week Open") - **Enhanced Clarity**: Maintains professional chart aesthetics while preserving all relevant information **Supported Session Intervals:** - 30-Minute Opens - 4-Hour Opens - Daily Opens - Weekly Opens - Monthly Opens ### Advanced Market Structure Tools **Liquidity Sweep Identification:** Highlights price wicks extending beyond previous HTF extremes that close within range—characteristic liquidity grab patterns. **HTF Midpoint Reference:** Displays the 50% retracement level of the most recent completed HTF candle, serving as a key reference for entries and profit targets. **HTF Opening Price:** Tracks current HTF candle open price, frequently functioning as dynamic support or resistance. **Interval Demarcation:** Visual separators defining HTF period boundaries for enhanced temporal clarity. ### Information Dashboard Compact, customizable dashboard displaying: - Current symbol and active timeframe - HTF candle countdown timer - Active trading session (Asia/London/New York) - Current date and time Flexible positioning: configurable for any chart corner. --- ## Default Configuration Optimized settings for immediate professional-grade chart presentation: - **Secondary HTF**: Disabled (enable for multi-timeframe comparative analysis) - **CISD Bullish Color**: Blue (#0080ff) – optimal visibility with reduced eye strain - **CISD Line Width**: 1 pixel – subtle yet discernible - **CISD Line Length**: 5 bars – balanced visibility without excessive clutter - **Session Opens**: Smart consolidation enabled – eliminates overlapping labels --- ## Application Strategies ### Trend Following 1. Monitor CISD confirmations aligned with HTF trend direction 2. Utilize HTF candle color for directional bias confirmation 3. Execute entries on pullbacks to HTF midpoint or open price levels ### Reversal Trading 1. Identify counter-trend CISD formations 2. Await HTF candle close confirming new directional bias 3. Use session opens as secondary confirmation levels ### Scalping 1. Trade exclusively in HTF candle direction 2. Employ lower timeframe CISD signals for precise entry timing 3. Target HTF midpoint or subsequent session open levels ### Structure-Based Trading 1. Mark liquidity sweep levels as potential reversal zones 2. Monitor CISD formations at key session opens 3. Confirm trend changes via HTF candle closes --- ## Customization Parameters Comprehensive customization options: - **Color Schemes**: Independent control of bull/bear candles, borders, CISD signals, session levels - **Dimensional Settings**: Candle width, line thickness, label sizing - **Display Quantities**: HTF candle count (1-10 range) - **Positioning**: Candle offset, dashboard placement, label positioning - **Line Styles**: Solid, dashed, or dotted rendering - **Timeframe Selection**: Manual secondary HTF specification --- ## Attribution **HTF Candle Visualization:** The HTF candle rendering methodology draws inspiration from Fadi x MMT's "MTF Candles" indicator. Their elegant implementation of multi-timeframe candle visualization provided valuable reference for this development. Recognition and appreciation to their contribution to the TradingView community. **CISD Detection:** Proprietary CISD detection algorithm engineered to identify market structure transitions with high signal clarity and reduced false positive rate. **Session Level Consolidation:** Custom-developed intelligent grouping system addressing the common challenge of overlapping session labels at coincident price levels. --- ## Open Source License This indicator is released as open source for the TradingView community. Permitted uses include: - Implementation in live trading - Educational study for Pine Script learning - Personal modification and customization - Distribution among trading communities Community contributions, improvements, and derivative works are welcomed and encouraged. --- ## Implementation Guide 1. **Installation**: Click "Add to Chart" 2. **Configuration Access**: Open indicator settings panel 3. **Initial Use**: Default settings provide optimal starting configuration 4. **Optional Features**: Enable secondary HTF for multi-timeframe analysis 5. **Theme Integration**: Adjust color schemes to match chart aesthetics --- ## Best Practices **Timeframe Optimization:** - 1-5 minute charts: Optimal with 15m or 1H HTF - 15-30 minute charts: Effective with 4H HTF - 1-4 hour charts: Suitable for Daily HTF - Daily charts: Best utilized with Weekly/Monthly HTF **CISD Trading Guidelines:** - Require CISD confirmation before position entry - Prioritize CISD signals at significant levels (session opens, HTF midpoints) - Confirm CISD direction aligns with HTF candle bias - Apply contextual filtering—not all CISD signals warrant trades **Session Open Strategy:** - Weekly opens typically provide robust support/resistance - Daily opens offer reliable intraday reference points - 4-Hour opens effective for short-term scalping - Consolidated labels (e.g., "Week-Day Open") indicate confluence zones with elevated significance --- ## Technical Specifications **Performance Optimization:** - Intelligent object management prevents TradingView rendering limits - Efficient array processing for session consolidation - Proper memory management through systematic object deletion - Consistent performance across all timeframe ranges **Compatibility:** - Universal timeframe support - Optimized for all market types (forex, stocks, crypto, futures) - Minimal computational overhead --- ## Support & Development **Feedback Channels:** - Comment section for user feedback and suggestions - Bug reports and feature requests welcomed - Community-driven enhancement consideration **Documentation:** - Well-commented source code for learning purposes - Clear section organization for easy navigation - Comprehensive type definitions for structural clarity - Educational value for market structure concept understanding --- ## Version Information **Version:** 1.0 (Initial Release) **License:** Open Source **Category:** Multi-Timeframe Analysis | Market Structure **Compatibility:** All Timeframes **Language:** Pine Script v5 --- **For optimal results:** - Provide feedback through comments - Share with trading communities - Submit enhancement suggestions - Report technical issues for resolution **Professional Support:** Available through comment section for technical inquiries, implementation questions, and feature requests. --- *Developed for the TradingView trading community | Professional-grade market structure analysis | Open source contribution*
Indikator Pine Script®
oleh gilani9393
2
Smoothed VWAP Bands + EMAsSmoothed VWAP bands With my script, you take the raw standard deviation and apply an EMA (exponential moving Advantages: 1. Less noise: * The bands don’t jump around with every tiny price spike. * Makes it easier to judge real price extremes. 2. Better zone visualization: * Inner and outer bands are smoother and more visually “stable.” * Easier to see meaningful trends, support/resistance, and breakout zones. 3. Fewer fakeouts: * Traders can filter out small false signals because smoothed bands only move when volatility actually changes. 4. Dynamic to volatility: * EMA smoothing keeps the bands adaptive: * In quiet periods, bands tighten. * In volatile periods, bands expand. * But it avoids extreme jitter caused by every micro-move. Safe Zone Rules 1. Long entries (green zone): * Price above VWAP (trend bullish). * Price inside inner band ±1σ (not touching outer extremes). * Optional: candle close confirmation (price fully above inner band). 2. Short entries (red zone): * Price below VWAP (trend bearish). * Price inside inner band ±1σ. * Optional: candle close confirmation. 3. Outer bands (±2σ): * Considered overextended zones → avoid entries to reduce fakeouts. 4. Visual cues: * Safe zones shaded lightly green/red inside inner band. * Outer bands remain unshaded (for context). Here’s a cheat sheet for trading the Smoothed VWAP Bands + EMAs that shows safe entry zones and trend alignment clearly. Smoothed VWAP Bands + EMAs Cheat Sheet Price Action Relative to Bands & EMAs +2σ (Outer Upper Band) ---------------- Extreme volatility zone Avoid entries here +1σ (Inner Upper Band) ---------------- Safe zone limit for longs Consider profit taking here VWAP Line (Green = Bullish, Red = Bearish) ================== Core trend indicator Only trade in VWAP trend direction -1σ (Inner Lower Band) ---------------- Safe zone limit for shorts Good for entries in trend direction -2σ (Outer Lower Band) ---------------- Extreme volatility zone Avoid entries here 1️⃣ Trend Direction with VWAP & EMAs * VWAP → shows the overall session trend. * Price above VWAP → bullish * Price below VWAP → bearish * EMA 5 (blue) → short-term momentum * EMA 20 (orange) → medium-term trend Rule: Only take trades in the direction of the trend: * Long trades → price > VWAP and EMA 5 > EMA 20 * Short trades → price < VWAP and EMA 5 < EMA 20 This prevents chasing trades against the trend and reduces fakeouts. 2️⃣ Entry Zones Using Smoothed VWAP Bands * Inner band (±1σ) → “safe entry zone” * Outer band (±2σ) → volatility extremes → avoid entries here Rule: Enter longs inside the inner band above VWAP and shorts inside the inner band below VWAP. Best used on intraday timeframes. 15, 5, 2, 1 min charts.
Indikator Pine Script®
oleh Simon20cent
1