Mulai

Options

Simple Moving Averge StrategySimple Vs. Exponential Moving Averages Formula for Exponential Moving Average (EMA) \begin{aligned} &\begin{aligned} EMA_{\text{Today}}=&\left(\text{Value}_{\text{Today}}\ast\left(\frac{\text{Smoothing}}{1+\text{Days}}\right)\right)\\ &+EMA_{\text{Yesterday}}\ast\left(1-\left(\frac{\text{Smoothing}}{1+\text{Days}}\right)\right)\end{aligned}\\ &\textbf{where:}\\ &EMA=\text{Exponential moving average} \end{aligned} ​ EMA Today ​ = ​ (Value Today ​ ∗( 1+Days Smoothing ​ )) +EMA Yesterday ​ ∗(1−( 1+Days Smoothing ​ )) ​ where: EMA=Exponential moving average ​  While there are many possible choices for the smoothing factor, the most common choice is:
Strategi Pine Script™
oleh xoussamachoubix
5MSM MAHESH 15It´s just the histogram of the MACD . (Actually it´s not a histogram, I like the Area visualisation more. But you can switch.) 5min stock market property When I´m using the MACD , I´m just searching for a divergence between Price and the MACD-histogram. I´m not interested in the MACD-signalline or the MACD-line in any way. As you can see, The omission of them leads to better visualisation. It´s much easier to spot a divergence. On the one hand because that way the histogram scales bigger, on the other hand becauce the lines can´t overdraw the histogram. Rules bullish Divergence: Price makes a lower low, oscillator makes higher low. Rules bearish Divergence: Price makes a higher high, oscillator makes lower high.
Indikator Pine Script™
oleh patrick199415
VolatilityVolatility - The amount of price deviation in the specified time interval. The calculation is made from the opening point to the closing point, and the maximum and minimum deviation between them is also included. Any timeframes are supported. Available information: the start date of the calculation (according to the time zone of the exchange), the current volatility from the initial opening point or from the last closing point, the total volatility for all periods. An indicator of useful use in everyday work. Thanks for your attention!
Indikator Pine Script™
oleh StCogitans
6
HPI for crypto [ptt]The Herrick Payoff Index is designed to show the amount of money flowing into or out of a futures contract. This indicator uses open interest (from Binance PERP like this BTCUSDTPERP_OI) from during its calculations, therefore, the pairs being analyzed must contain open interest data on Binance. The indicator only works with USDT pairs! Like RVNUSDT, BTCUSDT... does not work with USD pairs! The indicator works in two mode. Index mode - when the values moving 0-100 In this case, if the value below 10, it shows the money is flowing out of the futures contract and near the local bottom. If the value above 90, it shows the money is flowing into the futures contract and near the local top. (The two trigger can be modified, the default is low:10 and high:90) Oscillator mode - when the values moving around the origo (0) In this case, if the value above 0 (green), it shows the money is flowing into the futures contract, this is bullish If the value below 0 (red), it shows the money is flowing out of the futures contract, this is bearish
Indikator Pine Script™
oleh puttoAZ
11
Strategy BackTest Display Statistics - TraderHalaiThis script was born out of my quest to be able to display strategy back test statistics on charts to allow for easier backtesting on devices that do not natively support backtest engine (such as mobile phones, when I am backtesting from away from my computer). There are already a few good ones on TradingView, but most / many are too complicated for my needs. Found an excellent display backtest engine by 'The Art of Trading'. This script is a snippet of his hard work, with some very minor tweaks and changes. Much respect to the original author. Full credit to the original author of this script. It can be found here: www.tradingview.com I decided to modify the script by simplifying it down and make it easier to integrate into existing strategies, using simple copy and paste, by relying on existing tradingview strategy backtester inputs. I have also added 3 additional performance metrics: - Max Run Up - Average Win per trade - Average Loss per trade As this is a work in progress, I will look to add in more performance metrics in future, as I further develop this script. Feel free to use this display panel in your scripts and strategies. Thanks and enjoy :)
Strategi Pine Script™
oleh TraderHalai
4
Grid Settings & MMThis script is designed to help you plan your grid trading or when averaging your position in the spot market. The script has a small error (due to the simplification of the code), it does not take into account the size of the commission. You can set any values on all parameters on any timeframe, except for the number of orders in the grid (from 2 to 5). The usage algorithm is quite simple: 1. Connect the script 2. Install a Fibo grid on the chart - optional (settings at the bottom of the description) 3.On the selected pair, determine the HighPrice & LowPrice levels and insert their values 4.Evaluate grid data (levels, estimated profit ’%’, possible profit ‘$’...) And it's all) Block of variables for calculating grid and MM parameters Variables used regularly --- HighPrice and LowPrice - constant update when changing pairs --- Deposit - deposit amount - periodically set the actual amount Variables that do not require permanent changes --- Grids - set the planned number of grids, default 5 --- Steps - the planned number of orders in the grid, by default 5 --- C_Order - coefficient of increasing the size of orders in the base coin, by default 1.2 --- C_Price - trading levels offset coefficient, default 1.1 --- FirstLevel - location of the first buy level, default 0.5 --- Back_HL - number of candles back, default 150 *** For C_Order and C_Price variables, the value 1 means the same order size and the same distance between buy levels. The fibo grid is used for visualization, you can do without it, ! it is not tied to the script code ! You can calculate the levels of the Fibo grid using the formula: (level price - minimum price) / (maximum price - minimum price) For default values, grid levels are as follows: 1 ... 0.5 2...0.359 3 ... 0.211 4...0.0564 5...-0.1043 Short description: in the upper right corner --- indicator of the price movement for the last 150 candles, in % !!! there is no task here to "catch" the peak values - only a relative estimate. in the upper left corner --- total amount of the deposit --- the planned number of grids --- “cost” of one grid --- the size of the estimated profit depending on the specified HighPrice & LowPrice in the lower left corner --- Buy - price levels for buy orders --- Amount - the number of purchased coins in the corresponding order --- Sell - levels of profit taking by the sum of market orders in the grid --- $$$ - the sum of all orders in the grid, taking into account the last active order --- TP - profit amount by the amount of orders in the grid
Indikator Pine Script™
oleh avgtrade
1
Banknifty Volume - IN This simple indicator computes the average Relative Strength Index of each Banknifty stock and displays the volume on the chart with color schemes while the average line indicates the average RSI of all Bank Stocks. This indicator works on Banknifty and its stocks. It works on all time frames How You can use this? You can use this indicator for Volume analysis if the average RSI line is above the 0 line, the stock is moving upside and vice versa for Downside .
Indikator Pine Script™
oleh TradingTail
3
Price Pivots for NSE Index & F&O StocksPrice Pivots for NSE Index & F&O Stocks What is this Indicator? • This indicator calculates the price range a Stock or Index can move in a Day, Week or Month. Advantages of this Indicator • This is a Leading indicator, not Dynamic or Repaint. • Helps to identify the tight range of price movement. • Can easily identify the Options strike price. • The levels are more reliable and authentic than Gann Square of 9 Levels. • Develops a discipline in placing Targets. Disadvantages of this Indicator • The indicator is specifically made for National Stock Exchange of India (NSE) listed index and stocks. • The indicator is calculated only for index NIFTY, BANKNIFTY, FINNIFTY, MIDCPNIFTY and Stocks listed in Futures and Options. • The indicator shows nothing for other indexes and stocks other than above mentioned. • The data need to be entered manually. • The data need to be updated manually when the F&O listed stocks are updated. Who to use? Highly beneficial for Day Traders, it can be used for Swing and Positions as well. What timeframe to use? • Any timeframe. • The highlighted levels in Red and Green will not show correct levels in 1 minute timeframe. • 5min is recommended for Day Traders. When to use? • Wait for proper swing to form. • Recommended to avoid 1st 1 hour or market open, that is 9.15am to 10.15 or 10.30am. • Within this time a proper swing will be formed. How to use? Entry • Enter when the Price reach closer to the Blue line. • Enter Long when the Price takes a pullback or breakout at the Red lines. Exit • Exit position when the Price reach closer to the Red lines in Long positions. What are the Lines? Gray Lines: • Every lines with price labels are the Strike Prices in the Option Chain from NSE website. • Price moves from 1 Strike Price level to another. • The dashed lines are average levels of 2 Strike Prices. Red & Green Lines: • The Red and Green Lines will appear only after the first 1 hour. • The levels are calculated based on the 1st 1 hour. • Red Lines are important Resistance levels, these are strong Bearish reversal points. It is also a breakout level, this need to be figured out from the past levels, trend, percentage change and consolidation. • Green Lines are important Support levels, these are strong Bullish reversal points. It is also a breakdown level, this need to be figured out from the past levels, trend, percentage change and consolidation. What are the Labels? • First Number: Price of that level. • Numbers in (): Percentage change and Change of price from LTP(Last Traded Price) to that Level. How to use? Entry: • Enter when price is closer to the Red or Green lines. • Enter after considering previous Swing and Trend. • Note the 50% of previous Swing. • Enter Short when price reverse from each level. • If 50% of swing and the pivot level is closer it can be a good entry. Exit: • Use the logic of Entry, each level can be a target. • Exit when price is closer to the Red or Green lines. Indicator Menu Source • Custom: Enter the price manually after choosing the Source as Custom to show the Pivots at that price. • LTP: Pivot is calculated based on Last Traded Price. • Day Open: Pivot is calculated based on current day opening price. • PD Close: Pivot is calculated based on previous day closing price. • PD HL2: Pivot is calculated based on previous day average of High and Low. • PD HLC3: Pivot is calculated based on previous day average of High, Low and Close. "Time (IST) (Vertical)" • This is a marker of every 1 hour. • Usually major price movement happen between previous day last 1 hour (2:15 pm) to today first 1 hour (10:15 pm). • Two swings can happen between first 2 hour of current day. • At the end of the day last 1 hour from 2.15 pm another important movement will happen. • Usually rest of the time won't show any interesting movement. To the Users • Certain symbols may show the levels as a single line. For such symbols choose a different Source or Timeframe from the indicator menu. • Please inform if any of the Symbol's price levels don't react to the pivots, include the Symbol a well. • Also inform if you notice any wrong values, errors or abnormal behavior in the indicator. • Feel free to suggest or adding new features and options. General Tips • It is good if Stock trend is same as that of NIFTY trend. • Lots of indicators creates lots of confusion. • Keep the chart simple and clean. • Buy Low and Sell High. • Master averages or 50%. • Previous Swing High and Swing Low are crucial.
Indikator Pine Script™
oleh Arun_K_Bhaskar
19
Strategy: Combo Z ScoreStrategy version of Combo Z Score Objective: Can we use both VIX and MOVE relationships to indicate movement in the SPY? VIX (forward contract on SPY options) correlations are quite common as forward indicators however MOVE (forward contract on bonds) also provides a slightly different level of insight Using the Z-Score of VIX vs VVIX and MOVE vs inverted VIX (there is no M of Move so we use inverted Vix as a proxy) we get some helpful indications of potential future moves. Added %B to give us some exposure to momentum. Toggle VIX or MOVE. If anyone has a better idea of inverted Vix to proxy forward interest in MOVE let me know. Noticeable delta is that Vix only approach over the back test period is slightly better. Questions would be, what is the structure and nature of the market over the test period and in a bear market would MOVE or combined perform better.
Strategi Pine Script™
oleh jroche1973
2