Mulai

Rata-Rata Pergerakan / Moving Averages

CDC BACKTEST (MACD) FIX AMOUNT $200k per trade This strategy implements an Exponential Moving Average (EMA) Crossover System designed for backtesting and performance evaluation. EMA 12,26 (MACD) The trading logic is based on the crossover between two EMAs — a short-term EMA (12) and a long-term EMA (26) — which serves as a momentum-based signal for trend identification. Buy Condition: A long (buy) position is entered when the 12-period EMA crosses above the 26-period EMA, indicating a potential upward trend or bullish momentum. Sell Condition: A position is closed, or a short (sell) position is opened, when the 12-period EMA crosses below the 26-period EMA, signaling a potential downward trend or bearish momentum. Position Sizing: Each trade with a fixed position size of 200,000 USD (default), while the starting account balance is set at 400,000 (USD). Both the fixed trade amount and the initial balance are user-adjustable parameters, allowing flexibility for different risk preferences and portfolio sizes.
Strategi Pine Script®
oleh domesorawit
coinbot_mr_table이 스크립트는 **"MA 리본(Moving Average Ribbon) 기반 자동매매 전략"**입니다. 이름(coinbot_mr_table)에 모든 기능이 요약되어 있습니다. coinbot: user_id, exchange, leverage 등 자동매매 봇과 연동하기 위한 웹훅(Webhook) 신호 전송 기능이 포함되어 있습니다. mr (MA Ribbon): 18개(5~90)의 이동평균선(EMA 또는 SMA)이 100 이평선을 기준으로 정배열/역배열되는지를 색상(LIME/RUBI)으로 구분하여 추세를 판단합니다. table: 전략의 백테스팅 성과(총 승률, 일일 수익률 등)를 차트 위에 '누적 통계'와 '일일 통계' 테이블로 시각화해 줍니다. 이 스크립트의 매매 로직과 자동매매 신호에 대한 자세한 설명을 한글과 영어로 각각 제공해 드립니다. 🇰🇷 한글 (Korean) 이 스크립트는 **"MA 리본(Moving Average Ribbon)"**을 핵심 엔진으로 사용하는 완전 자동매매(Autotrade) 전략 신호 생성기입니다. 이 지표의 목적은 차트에서 추세를 시각적으로 보여주는 것을 넘어, 구체적인 매매 신호(진입, 분할 익절, 손절)가 발생할 때마다 JSON 형식의 명령어를 자동매매 봇으로 전송하는 것입니다. 1. 📈 매매 전략: MA 리본 추세 추종 이 전략은 18개의 단기/중기 이동평균선(5~90)과 1개의 장기 이동평균선(100)을 사용하여 추세를 정의합니다. 100 이평선: 장기 추세를 가르는 기준선(강/약을 나누는 분수령)입니다. 18개 리본: 이 리본들이 100 이평선 위에서 모두 상승(LIME 색상)하면 '강세 추세', 아래에서 모두 하락(RUBI 색상)하면 '약세 추세'로 판단합니다. 2. 🚦 진입 및 청산 신호 이 전략은 '전환(Reversing)' 전략입니다. 즉, 롱 신호가 발생하면 숏 포지션을 종료하고 롱으로 진입하며, 그 반대도 마찬가지입니다. (항상 롱 또는 숏 포지션을 유지합니다.) 진입 신호 (Long): 추세 확정: 모든 리본이 100 이평선 위에서 '강세(LIME)'로 통일될 때. 재진입 (불타기): 강세 추세 중, 리본이 일시적으로 조정(GREEN)을 보이다가 다시 '강세(LIME)'로 복귀할 때. 진입 신호 (Short): 추세 확정: 모든 리본이 100 이평선 아래에서 '약세(RUBI)'로 통일될 때. 재진입 (물타기): 약세 추세 중, 리본이 일시적으로 반등(MAROON)하다가 다시 '약세(RUBI)'로 복귀할 때. 청산 신호 (자동매매): 진입 (ENTRY): 롱/숏 신호 발생 시, 설정한 user_id, exchange, leverage 등을 포함한 JSON 메시지를 전송합니다. 익절 (TAKE_PROFIT): 롱/숏 포지션이 사용자가 설정한 TP1, TP2, TP3 목표가에 도달하면, 설정된 물량(qty_percent)만큼 분할 익절하라는 JSON 메시지를 전송합니다. 손절 (CLOSE): 포지션이 설정한 sl_percent에 도달하면, 포지션을 즉시 종료하라는 JSON 메시지를 전송합니다. 3. 📊 핵심 기능: 통계 테이블 이 스크립트는 백테스팅 성과를 두 개의 테이블로 요약하여 차트에 실시간으로 표시합니다. 누적 통계 (Total Stats): 전체 기간의 총 진입 횟수, 승/패, 승률(Winrate), 총수익률(Total Profit) 등을 보여줍니다. 일일 통계 (Daily Stats): '오늘' 하루 동안 발생한 매매의 성과(승/패, 승률, 수익률)만 따로 집계하여 보여줍니다. 🇺🇸 영어 (English) This script is an automated trading (Autotrade) strategy signal generator based on a "Moving Average (MA) Ribbon." Its purpose extends beyond visual trend analysis; it is designed to generate specific JSON-formatted commands and send them to an automated trading bot whenever a trade signal (entry, take-profit, stop-loss) occurs. 1. 📈 Trading Strategy: MA Ribbon Trend Following This strategy uses 18 short-to-mid-term Moving Averages (5 to 90) and one long-term Moving Average (100) to define the trend. 100-MA: This acts as the baseline filter, dividing the market into a long-term bull or bear state. 18-MA Ribbon: When all 18 ribbons are above the 100-MA and rising (LIME color), it defines a 'Strong Bull Trend'. When all are below the 100-MA and falling (RUBI color), it defines a 'Strong Bear Trend'. 2. 🚦 Entry and Exit Signals This is a 'Reversing' strategy. This means when a long signal occurs, it closes any existing short position and enters long, and vice-versa. It is designed to hold a position (either long or short) at all times. Long Entry Signals: Trend Confirmation: When all ribbons unify into a 'Strong Bull' (LIME) state above the 100-MA. Re-entry (Buy the Dip): During a bull trend, if the ribbon shows a temporary pullback (GREEN) and then flips back to 'Strong Bull' (LIME). Short Entry Signals: Trend Confirmation: When all ribbons unify into a 'Strong Bear' (RUBI) state below the 100-MA. Re-entry (Sell the Rally): During a bear trend, if the ribbon shows a temporary rally (MAROON) and then flips back to 'Strong Bear' (RUBI). Exit Signals (For Automation): ENTRY: When a long/short signal occurs, it sends a JSON message with the user's user_id, exchange, leverage, etc. TAKE_PROFIT: When a position reaches the user-defined TP1, TP2, or TP3 price targets, it sends a JSON message to take profit on the specified quantity (qty_percent) for that portion. CLOSE (Stop-Loss): When a position hits the sl_percent threshold, it sends a JSON message to immediately close the entire position. 3. 📊 Key Feature: Statistics Tables The script provides two real-time summary tables on the chart to visualize backtesting performance. Cumulative Stats: Shows lifetime performance, including total trades, wins, losses, win rate, and total profit. Daily Stats: Isolates and displays the performance metrics (wins, losses, win rate, profit) for "Today's" trading activity only.
Strategi Pine Script®
oleh minji75
HEK Dinamik Fiyat Kanalı Stratejisi v1HEK Dynamic Price Channel Strategy Concept The HEK Dynamic Price Channel provides a channel structure that expands and contracts according to price momentum and time-based equilibrium. Unlike fixed-band systems, it evaluates the interaction between price and its balance line through an adaptive channel width that dynamically adjusts to changing market conditions. How It Works When the price reacts to the midline, the channel bands automatically reposition themselves. Touching the upper band indicates a strengthening trend, while touching the lower band signals weakening momentum. This adaptive mechanism helps filter out false signals during sudden directional changes, enhancing overall signal quality. Advantages ✅ Maintains trend continuity while avoiding overtrading. ✅ Automatically adapts to changing volatility conditions. ✅ Detects early signals of short- and mid-term trend reversals. Applications Directional confirmation in spot and futures markets. A supporting tool in channel breakout strategies. Identifying price consolidation and equilibrium zones. Note This strategy is intended for educational and research purposes only. It should not be considered financial advice. Always consult a professional financial advisor before making investment decisions. © HEK — Adaptive Channel Approach on Dynamic Market Structures 6 gün önce Sürüm Notları HEK Dynamic Price Channel Strategy Concept The HEK Dynamic Price Channel provides a channel structure that expands and contracts according to price momentum and time-based equilibrium. Unlike fixed-band systems, it evaluates the interaction between price and its balance line through an adaptive channel width that dynamically adjusts to changing market conditions. How It Works When the price reacts to the midline, the channel bands automatically reposition themselves. Touching the upper band indicates a strengthening trend, while touching the lower band signals weakening momentum. This adaptive mechanism helps filter out false signals during sudden directional changes, enhancing overall signal quality. Advantages ✅ Maintains trend continuity while avoiding overtrading. ✅ Automatically adapts to changing volatility conditions. ✅ Detects early signals of short- and mid-term trend reversals. Applications Directional confirmation in spot and futures markets. A supporting tool in channel breakout strategies. Identifying price consolidation and equilibrium zones. Note This strategy is intended for educational and research purposes only. It should not be considered financial advice. Always consult a professional financial advisor before making investment decisions. © HEK — Adaptive Channel Approach on Dynamic Market Structures
Strategi Pine Script®
oleh hekorucuklu
MA Break Trend Strategy - Multi Stop MethodsThis is a trend-following trading strategy with multiple stop loss options for both long and short positions. Entry Signal: Trades are triggered when price crosses above (long) or below (short) a configurable moving average (EMA or SMA, default 200-period) Volume Confirmation: Optional filter requiring volume to exceed a multiplier (default 1.5x) of the 20-period volume average before entering trades Five Stop Loss Methods: - ATR-based: Dynamic stop using Average True Range multiplier below/above entry price - MA Buffer: Stop set at a percentage offset from a separate moving average (default 50-period EMA) - Donchian Channel: Uses the lowest low/highest high over a specified lookback period - Keltner Channel: ATR-based bands around an EMA basis - Lowest Low/Highest High: Simple swing point stops based on recent price extremes - Trailing Stops: All stop methods automatically trail in the profitable direction (upward for longs, downward for shorts) to lock in gains while never moving against the position Visual Indicators: - Plots the trend-following moving average in blue - Shows active stop loss levels in red when in a position - Displays reference lines for all stop types when flat - Entry signals marked with triangles (green up for long, red down for short) - Background highlighting for volume-confirmed crossovers
Strategi Pine Script®
oleh solidSnow32524
1
MoneyPlant-Auto Support Resistance V2.0 🧭 Overview MoneyPlant – Auto Support Resistance is a professional-grade indicator designed to automatically detect dynamic Support and Resistance levels using real-time market structure. It combines trend confirmation, structure analysis, and momentum logic to identify high-probability trading zones in all market conditions. ⚙️ Core Concept This indicator uses a unique combination of classic and proprietary logic to filter only the most relevant S/R levels: • Dynamic Support/Resistance Mapping: Detects strong reaction levels based on price structure, candle rejection points, and breakout validation. • EMA & WMA Trend Filter: Uses a triple-moving-average model (default EMA 18, EMA 25, and WMA 7) to confirm current market bias. • MACD Momentum Filter: Confirms trend strength and helps avoid false breakouts. • Smart Alignment Logic: Generates signals only when structure, trend, and momentum all align in the same direction. 🧠 How It Works 1. Buy Setup:  When price breaks above a resistance level with bullish EMA/WMA alignment and positive MACD momentum → Buy Signal triggers. 2. Sell Setup:  When price breaks below a support level with bearish EMA/WMA alignment and negative MACD momentum → Sell Signal triggers. 3. Auto-Refreshing Zones:  Support and Resistance zones update dynamically as market structure evolves. 🎯 Best Use Cases • Works effectively on Stocks, Indices, Forex, and Commodities (e.g., XAUUSD, NIFTY, BANKNIFTY ). • Ideal for Intraday & Swing Trading (15 min – 1 hour timeframes). • Fully compatible with TradingView alerts and automation tools. 💡 Key Features ✅ Automatic Support/Resistance detection ✅ Adaptive EMA + WMA + MACD trend logic ✅ Real-time Buy/Sell alerts ✅ Multi-timeframe compatibility ✅ Optimized for clean chart visuals ⚖️ Recommended Settings • EMA Fast: 18 • EMA Slow: 25 • WMA Filter: 7 • MACD: Default parameters (Users may adjust EMA/WMA settings according to their own trading style.) 🔒 How to Get Access To get access to this invite-only script, please send me a private message on TradingView or use the link in my profile. Once your username is added via Manage Access, you’ll be able to use the indicator. 🧾 Notes for Traders This tool does not repaint, and it’s meant for educational and analytical purposes only. Each license is valid for one TradingView username — no resale or redistribution is permitted. Developed by MoneyPlant Smart Automation for Professional Traders
Strategi Pine Script®
oleh saandeeppavaar
ORBSMMAATRVOLREENTRY2Contracts📈 Opening Range Fibonacci Breakout (TradingView Strategy) Overview: The Opening Range Fibonacci Breakout strategy is designed to capture high-probability intraday moves by combining the power of the 15-minute opening range, trend confirmation via SMMA, and volume-based momentum filtering. At the start of each trading session, the script automatically plots the Opening Range Box based on the first 15 minutes of price action — highlighting key intraday support and resistance levels. How It Works: Opening Range Setup The first 15 minutes of the session define the range high and low. A visual box marks this zone on the chart for easy reference. Signal Generation A Smoothed Moving Average (SMMA) with a user-defined period determines overall trend bias. Candle volume is analyzed to confirm momentum strength. Long Signal: Price breaks above the opening range high, SMMA trending up, and volume supports the move. Short Signal: Price breaks below the opening range low, SMMA trending down, and volume supports the move. Take Profit & Targets Fibonacci extension levels are automatically plotted from the opening range. These dynamic levels serve as structured Take Profit (TP) zones for partial or full exits. Features: ✅ 15-Minute Opening Range Box ✅ Adjustable SMMA period ✅ Volume-based confirmation filter ✅ Automatic Fibonacci profit targets ✅ Visual Long/Short alerts & signals Ideal For: Scalpers and intraday traders who rely on early-session momentum, breakout confirmation, and precision exit targets. Backtested for MNQ/NQ futures trading
Strategi Pine Script®
oleh wavyyy_z
1
Trend Pullback System```{"variant":"standard","id":"36492","title":"Trend Pullback System Description"} Trend Pullback System is a price-action trend continuation model that looks to enter on pullbacks, not breakouts. It’s designed to find high-quality long/short entries inside an already established trend, place the stop at meaningful structure, trail that stop as structure evolves, and warn you when the trade thesis is no longer valid. Developed by: Mohammed Bedaiwi --------------------------------- HOW IT WORKS --------------------------------- 1. Trend Detection • The strategy defines overall bias using moving averages. • Bullish environment (“uptrend”): price above the slower MA, fast MA above slow MA, and the slow MA is sloping up. • Bearish environment (“downtrend”): price below the slower MA, fast MA below slow MA, and the slow MA is sloping down. This prevents trading against chop and focuses on continuation moves in the dominant direction. 2. Pullback + Re-entry Logic • The script waits for price to pull back into structure (support in an uptrend, resistance in a downtrend), and then push back in the direction of the main trend. • That “push back” is the setup trigger. We don’t chase the first breakout candle — we buy/sell the retest + resume. 3. Structural Levels (“Diamonds”) • Green diamond (below bar): bullish pivot low formed while the trend is bullish. This marks defended support. - Use it as a re-entry zone for longs. - Use it to trail a stop higher when you’re already long. - Shorts can take profit here because buyers stepped in. • Red diamond (above bar): bearish pivot high formed while the trend is bearish. This marks defended resistance. - Use it as a re-entry zone for shorts. - Use it to trail a stop lower when you’re already short. - Longs can take profit here because sellers stepped in. 4. Entry Signals • BUY arrow (green triangle up under the candle, text like “BUY” / “BUY Zone”): - LongSetup is true. - Trend is bullish or turning bullish. - Price just bounced off recent defended support (green diamond) and reclaimed short-term momentum. Meaning: enter long here or cover/exit shorts. • SELL arrow (red triangle down above the candle): - ShortSetup is true. - Trend is bearish or turning bearish. - Price just rolled down from defended resistance (red diamond) and lost short-term momentum. Meaning: enter short here or take profit on longs. These are the primary trade entries. They are meant to be actionable. 5. Weak Setups (“W” in yellow) • Yellow triangle with “W”: - A possible long/short idea is trying to form, BUT the higher-timeframe confirmation is not fully there yet. - Think of it as early pressure / early caution, not a full signal. • You usually watch these areas rather than jumping in immediately. 6. Exit Warning (orange “EXIT” label above a bar) • The strategy will raise an EXIT marker when you’re in a trade and the *opposite* side just produced a confirmed setup. - You’re short and a valid longSetup appears → EXIT. - You’re long and a valid shortSetup appears → EXIT. • This is basically: “Close or reduce — the other side just took control.” • It’s not just a trailing stop hit; it’s a regime flip warning. 7. Stop, Target, and Trailing • On every new setup, the script records: - Initial stop: recent swing beyond the defended level (below support for longs, above resistance for shorts). - Initial target: recent opposing swing. • While you’re in position, if new confirming diamonds print in your favor, the stop can trail toward the new defended level. • This creates structure-based risk management (not just fixed % or ATR). 8. Reference Levels • The strategy also plots prior higher-timeframe closes (last week’s close, last month’s close, last year’s close). These can behave as magnets or stall points. • They’re helpful for take-profit timing and for reading “are we trading above or below last month’s close?” 9. Momentum Panel (hidden by default) • Internally, the script calculates an SMI-style momentum oscillator with overbought/oversold zones. • This is optional visual confirmation and does not drive the core entry/exit logic. --------------------------------- WHAT A TRADE LOOKS LIKE IN REAL PRICE ACTION --------------------------------- Early warning • Yellow W + red diamonds + red down arrows = “This is getting weak. Short setups are here.” • You may also see something like “My Short Entry Id.” That’s where the short side actually engages. Bearish follow-through, then exhaustion • Price bleeds down. • Then the orange EXIT appears. → Translation: “If you’re still short, close it. Buyers are stepping in hard. Risk of reversal is now high.” Regime flip • Right after EXIT, multiple green BUY arrows fire together (“BUY”, “BUYZone”). • That’s the true long trigger. → This is where you either enter long or flip from short to long. Expansion leg • After that flip, price rips up for multiple candles / days / weeks. • While it runs: - Green diamonds appear under pullbacks → “dip buy zones / trail stop up here.” - More BUY arrows show on minor pullbacks → continuation long / scale adds. Distribution / topping • Later, you start seeing new yellow W triangles again near local highs. That’s your “careful, this might be topping” warning. • You finally get a hard red candle, and green diamonds stop stacking. → That’s where you tighten risk, scale out, or assume the move is mature. In plain terms, the model is doing the following for you: • It puts you short during weakness. • It tells you when to get OUT of the short. • It flips you long right as control changes. • It gives you a structure-based trail the whole way up. • It warns you again when momentum at the top starts cracking. That is exactly how the logic was designed. --------------------------------- QUICK INTERPRETATION CHEAT SHEET --------------------------------- 🔻 Red triangle + “Short Entry” near a red diamond → Short entry zone (or take profit on a long). 🟥 Red diamond above bar → Sellers defended here. Treat it as resistance. Good place to trail short stops just above that level. Avoid chasing longs straight into it. 🟨 Yellow W → Attention only. Early pressure / possible turn. Not fully confirmed. 🟧 EXIT (orange label) → The opposite side just printed a real setup. Close the old idea (cover shorts if you’re short, exit longs if you’re long). Thesis invalid. 🟩 Burst of green BUY triangles after EXIT → Long entry. Also a “cover shorts now” alert. This is the core money entry in bullish reversals. 💎 Green diamond below bar → Bulls defended that level. Good for trailing your long stop up, and good “buy the dip in trend” locations. 📈 Blue / teal MAs stacked and rising → Confirmed bullish structure. You’re in trend continuation mode, so dips are opportunities, not automatic exits. --------------------------------- COLOR / SHAPE KEY --------------------------------- • Green triangle up (“BUY”, “BUY Zone”): Long entry / cover shorts / continuation long trigger. • Red triangle down: Short entry / take profit on longs / continuation short trigger. • Orange “EXIT” label: Opposite side just fired a real setup. The previous trade thesis is now invalid. • Green diamond below price: Bullish defended support in an uptrend. Use for dip buys, trailing stops on longs, and objective cover zones for shorts. • Red diamond above price: Bearish defended resistance in a downtrend. Use for re-entry shorts, trailing stops on shorts, and objective scale-out zones for longs. • Yellow “W”: Weak / early potential setup. Watch it, don’t blindly trust it. • Moving average bands (fast MA, slow MA, Hull MA): When stacked and rising, bullish control. When stacked and falling, bearish control. --------------------------------- INTENT --------------------------------- This system is built to: • Trade with momentum, not against it. • Enter on pullbacks into proven structure, not chase stretched breakouts. • Automate stop/target logic around actual defended swing levels. • Warn you when the other side takes over so you don’t give back gains. Typical usage: 1. In an uptrend, wait for price to pull back, print a green diamond (support proved), then take the first BUY arrow that fires. 2. In a downtrend, wait for a bounce into resistance, print a red diamond (sellers proved), then take the first SELL arrow that fires. 3. Respect EXIT when it appears — that’s the model saying “this trade is done.” --------------------------------- DISCLAIMER --------------------------------- This script is for educational and research purposes only. It is not financial advice, investment advice, or a recommendation to buy or sell any security, cryptoasset, or derivative. Markets carry risk. Past performance does not guarantee future results. You are fully responsible for your own decisions, position sizing, risk management, and compliance with all applicable laws and regulations.
Strategi Pine Script®
oleh mbedaiwi2
HEK Dynamic Price Channel StrategyHEK Dynamic Price Channel Strategy Concept The HEK Dynamic Price Channel provides a channel structure that expands and contracts according to price momentum and time-based equilibrium. Unlike fixed-band systems, it evaluates the interaction between price and its balance line through an adaptive channel width that dynamically adjusts to changing market conditions. How It Works When the price reacts to the midline, the channel bands automatically reposition themselves. Touching the upper band indicates a strengthening trend, while touching the lower band signals weakening momentum. This adaptive mechanism helps filter out false signals during sudden directional changes, enhancing overall signal quality. Advantages ✅ Maintains trend continuity while avoiding overtrading. ✅ Automatically adapts to changing volatility conditions. ✅ Detects early signals of short- and mid-term trend reversals. Applications Directional confirmation in spot and futures markets. A supporting tool in channel breakout strategies. Identifying price consolidation and equilibrium zones. Note This strategy is intended for educational and research purposes only. It should not be considered financial advice. Always consult a professional financial advisor before making investment decisions. © HEK — Adaptive Channel Approach on Dynamic Market Structures
Strategi Pine Script®
oleh hekorucuklu
1
Iriza4 -DAX EMA+HULL+ADX TP40 SL205 MIN SKALP. Additional filters improve accuracy: the strategy blocks trades after too many consecutive bullish or bearish candles (streak filter) and ignores signals when price is too far from the EMA (measured by ATR distance). Each position uses a fixed risk-to-reward ratio of 1 : 2 with clear stop-loss and take-profit targets, without partial exits or breakevens. The goal is to identify clean pullbacks inside strong trends and filter out late or exhausted entries
Strategi Pine Script®
oleh Radoje1984
Empire OS Trading Fully Automated Prop Firm Ready💎 Prop-Firm-Ready Momentum System v3 — The Gold-Mine Algorithm 💎 Engineered for the same standards that top prop firms demand — minimal drawdown, consistent equity growth, and precision-based execution. This isn’t a basic indicator; it’s a refined momentum engine built for traders who scale capital and manage risk like professionals. Performance Snapshot • Profit Factor 2.26 • Win Rate 33 % • Max Drawdown 0.9 % • Total P/L + $447 • W/L Ratio 4.6 : 1 Stress-tested on Gold (XAUUSD) across live-market conditions, it stays composed under volatility and delivers structured, data-driven consistency. ⚡ See it. Test it. Scale it. Built for prop-firm precision — from $10 K to $300 K and beyond.
Strategi Pine Script®
oleh Empire-OS-Trading
One For All Strategy by Anson🏆 Exclusive Indicator: One For All Strategy . 📈 Works for stocks, forex, crypto, indices 📈 Easy to use, real-time alerts, no repaint 📈 No grid, no martingale, no hedging 📈 One position at a time . One For All Strategy by Anson A multi-indicator TradingView strategy designed to identify long and short trading opportunities by combining trend-following and momentum signals, paired with risk management rules to guide entries and exits. . Core Logic & Key Indicator: X Moving Average: A proprietary adaptive moving average that adjusts its responsiveness to price changes based on market volatility. It uses an efficiency ratio to modify its smoothing behavior—adapting to whether the market is trending or ranging. Users can toggle a setting to let this ratio dynamically adjust the indicator’s sensitivity or use a fixed smoothing factor. . Entry Conditions: . Long Entry: Triggered when momentum signals strength, price action aligns with a broader upward trend, the X MA indicates short-term upward momentum, and a minimum number of bars have passed since the last trade (to prevent overtrading). . Short Entry: Triggered when momentum signals weakness, price action aligns with a broader downward trend, the X MA indicates short-term downward momentum, and a minimum number of bars have passed since the last trade. . Exit Conditions: . Trailing Stop: Activates after a position has been open for a set number of bars (to avoid premature exits). A trailing stop—based on a percentage of the entry price—locks in profits as the trade moves favorably, adjusting dynamically to protect gains. . Additional Features: Visualisation: Overlays the X MA (orange line) and price (semi-transparent blue) on the chart for clear signal tracking. . See the author's instructions on the right to learn how to get access to the strategy.
Strategi Pine Script®
oleh anson5129
1
Zero Lag Trend Signals (MTF) [Quant Trading] V7Overview The Zero Lag Trend Signals (MTF) V7 is a comprehensive trend-following strategy that combines Zero Lag Exponential Moving Average (ZLEMA) with volatility-based bands to identify high-probability trade entries and exits. This strategy is designed to reduce lag inherent in traditional moving averages while incorporating dynamic risk management through ATR-based stops and multiple exit mechanisms. This is a longer term horizon strategy that takes limited trades. It is not a high frequency trading and therefore will also have limited data and not > 100 trades. How It Works Core Signal Generation: The strategy uses a Zero Lag EMA (ZLEMA) calculated by applying an EMA to price data that has been adjusted for lag: Calculate lag period: floor((length - 1) / 2) Apply lag correction: src + (src - src ) Calculate ZLEMA: EMA of lag-corrected price Volatility bands are created using the highest ATR over a lookback period multiplied by a band multiplier. These bands are added to and subtracted from the ZLEMA line to create upper and lower boundaries. Trend Detection: The strategy maintains a trend variable that switches between bullish (1) and bearish (-1): Long Signal: Triggers when price crosses above ZLEMA + volatility band Short Signal: Triggers when price crosses below ZLEMA - volatility band Optional ZLEMA Trend Confirmation: When enabled, this filter requires ZLEMA to show directional momentum before entry: Bullish Confirmation: ZLEMA must increase for 4 consecutive bars Bearish Confirmation: ZLEMA must decrease for 4 consecutive bars This additional filter helps avoid false signals in choppy or ranging markets. Risk Management Features: The strategy includes multiple stop-loss and take-profit mechanisms: Volatility-Based Stops: Default stop-loss is placed at ZLEMA ± volatility band ATR-Based Stops: Dynamic stop-loss calculated as entry price ± (ATR × multiplier) ATR Trailing Stop: Ratcheting stop-loss that follows price but never moves against position Risk-Reward Profit Target: Take-profit level set as a multiple of stop distance Break-Even Stop: Moves stop to entry price after reaching specified R:R ratio Trend-Based Exit: Closes position when price crosses EMA in opposite direction Performance Tracking: The strategy includes optional features for monitoring and analyzing trades: Floating Statistics Table: Displays key metrics including win rate, GOA (Gain on Account), net P&L, and max drawdown Trade Log Labels: Shows entry/exit prices, P&L, bars held, and exit reason for each closed trade CSV Export Fields: Outputs trade data for external analysis Default Strategy Settings Commission & Slippage: Commission: 0.1% per trade Slippage: 3 ticks Initial Capital: $1,000 Position Size: 100% of equity per trade Main Calculation Parameters: Length: 70 (range: 70-7000) - Controls ZLEMA calculation period Band Multiplier: 1.2 - Adjusts width of volatility bands Entry Conditions (All Disabled by Default): Use ZLEMA Trend Confirmation: OFF - Requires ZLEMA directional momentum Re-Enter on Long Trend: OFF - Allows multiple entries during sustained trends Short Trades: Allow Short Trades: OFF - Strategy is long-only by default Performance Settings (All Disabled by Default): Use Profit Target: OFF Profit Target Risk-Reward Ratio: 2.0 (when enabled) Dynamic TP/SL (All Disabled by Default): Use ATR-Based Stop-Loss & Take-Profit: OFF ATR Length: 14 Stop-Loss ATR Multiplier: 1.5 Profit Target ATR Multiplier: 2.5 Use ATR Trailing Stop: OFF Trailing Stop ATR Multiplier: 1.5 Use Break-Even Stop-Loss: OFF Move SL to Break-Even After RR: 1.5 Use Trend-Based Take Profit: OFF EMA Exit Length: 9 Trade Data Display (All Disabled by Default): Show Floating Stats Table: OFF Show Trade Log Labels: OFF Enable CSV Export: OFF Trade Label Vertical Offset: 0.5 Backtesting Date Range: Start Date: January 1, 2018 End Date: December 31, 2069 Important Usage Notes Default Configuration: The strategy operates in its most basic form with default settings - using only ZLEMA crossovers with volatility bands and volatility-based stop-losses. All advanced features must be manually enabled. Stop-Loss Priority: If multiple stop-loss methods are enabled simultaneously, the strategy will use whichever condition is hit first. ATR-based stops override volatility-based stops when enabled. Long-Only by Default: Short trading is disabled by default. Enable "Allow Short Trades" to trade both directions. Performance Monitoring: Enable the floating stats table and trade log labels to visualize strategy performance during backtesting. Exit Mechanisms: The strategy can exit trades through multiple methods: stop-loss hit, take-profit reached, trend reversal, or trailing stop activation. The trade log identifies which exit method was used. Re-Entry Logic: When "Re-Enter on Long Trend" is enabled with ZLEMA trend confirmation, the strategy can take multiple long positions during extended uptrends as long as all entry conditions remain valid. Capital Efficiency: Default setting uses 100% of equity per trade. Adjust "default_qty_value" to manage position sizing based on risk tolerance. Realistic Backtesting: Strategy includes commission (0.1%) and slippage (3 ticks) to provide realistic performance expectations. These values should be adjusted based on your broker and market conditions. Recommended Use Cases Trending Markets: Best suited for markets with clear directional moves where trend-following strategies excel Medium to Long-Term Trading: The default length of 70 makes this strategy more appropriate for swing trading rather than scalping Risk-Conscious Traders: Multiple stop-loss options allow traders to customize risk management to their comfort level Backtesting & Optimization: Comprehensive performance tracking features make this strategy ideal for testing different parameter combinations Limitations & Considerations Like all trend-following strategies, performance may suffer in choppy or ranging markets Default 100% position sizing means full capital exposure per trade - consider reducing for conservative risk management Higher length values (70+) reduce signal frequency but may improve signal quality Multiple simultaneous risk management features may create conflicting exit signals Past performance shown in backtests does not guarantee future results Customization Tips For more aggressive trading: Reduce length parameter (minimum 70) Decrease band multiplier for tighter bands Enable short trades Use lower profit target R:R ratios For more conservative trading: Increase length parameter Enable ZLEMA trend confirmation Use wider ATR stop-loss multipliers Enable break-even stop-loss Reduce position size from 100% default For optimal choppy market performance: Enable ZLEMA trend confirmation Increase band multiplier Use tighter profit targets Avoid re-entry on trend continuation Visual Elements The strategy plots several elements on the chart: ZLEMA line (color-coded by trend direction) Upper and lower volatility bands Long entry markers (green triangles) Short entry markers (red triangles, when enabled) Stop-loss levels (when positions are open) Take-profit levels (when enabled and positions are open) Trailing stop lines (when enabled and positions are open) Optional ZLEMA trend markers (triangles at highs/lows) Optional trade log labels showing complete trade information Exit Reason Codes (for CSV Export) When CSV export is enabled, exit reasons are coded as: 0 = Manual/Other 1 = Trailing Stop-Loss 2 = Profit Target 3 = ATR Stop-Loss 4 = Trend Change Conclusion Zero Lag Trend Signals V7 provides a robust framework for trend-following with extensive customization options. The strategy balances simplicity in its core logic with sophisticated risk management features, making it suitable for both beginner and advanced traders. By reducing moving average lag while incorporating volatility-based signals, it aims to capture trends earlier while managing risk through multiple configurable exit mechanisms. The modular design allows traders to start with basic trend-following and progressively add complexity through ZLEMA confirmation, multiple stop-loss methods, and advanced exit strategies. Comprehensive performance tracking and export capabilities make this strategy an excellent tool for systematic testing and optimization. Note: This strategy is provided for educational and backtesting purposes. All trading involves risk. Past performance does not guarantee future results. Always test thoroughly with paper trading before risking real capital, and adjust position sizing and risk parameters according to your risk tolerance and account size. ================================================================================ TAGS: ================================================================================ trend following, ZLEMA, zero lag, volatility bands, ATR stops, risk management, swing trading, momentum, trend confirmation, backtesting ================================================================================ CATEGORY: ================================================================================ Strategies ================================================================================ CHART SETUP RECOMMENDATIONS: ================================================================================ For optimal visualization when publishing: Use a clean chart with no other indicators overlaid Select a timeframe that shows multiple trade signals (4H or Daily recommended) Choose a trending asset (crypto, forex major pairs, or trending stocks work well) Show at least 6-12 months of data to demonstrate strategy across different market conditions Enable the floating stats table to display key performance metrics Ensure all indicator lines (ZLEMA, bands, stops) are clearly visible Use the default chart type (candlesticks) - avoid Heikin Ashi, Renko, etc. Make sure symbol information and timeframe are clearly visible ================================================================================ COMPLIANCE NOTES: ================================================================================ ✅ Open-source publication with complete code visibility ✅ English-only title and description ✅ Detailed explanation of methodology and calculations ✅ Realistic commission (0.1%) and slippage (3 ticks) included ✅ All default parameters clearly documented ✅ Performance limitations and risks disclosed ✅ No unrealistic claims about performance ✅ No guaranteed results promised ✅ Appropriate for public library (original trend-following implementation with ZLEMA) ✅ Educational disclaimers included ✅ All features explained in detail ================================================================================
Strategi Pine Script®
oleh Quant_Trading_Pro
1
Hull Suite Strategy with Time FilterThis script is a Hull Moving Average–based trend system designed to visualize market direction and filter signals during specific trading hours. It features: Dual HMA bands for smoother trend detection Color changes based on slope to highlight momentum Optional time filter for signal control within session hours Compact buy/sell signal markers You can adjust HMA lengths, time filters, and visual options from the settings panel. This script is intended for educational and analytical purposes only — not financial advice.
Strategi Pine Script®
oleh sunnymet2000
[Aegis]DCA grid Strategy for Crypto### **Crypto Market Long-Only Strategy (DCA with Risk Mitigation)** This strategy is a Long-only approach, often using a Dollar-Cost Averaging (DCA) method for staggered entries. It is designed to mitigate the risk of being unable to exit a position for a prolonged period, which typically occurs when a series of initial DCA entries result in a losing trade. The strategy has the following characteristics: #### **1. Markets** * Trade in highly liquid Perpetual Futures markets for cryptocurrencies. #### **2. Position Sizing** The initial entry quantity is determined by setting the **Initial Entry Ratio** in the input values. * If the **Subsequent Entry Multiplier** is 1, the maximum position size upon final entry is determined by: $$\text{Initial Entry Quantity} \times \text{Number of Entries}$$ * If the **Subsequent Entry Multiplier** is $x$, the maximum position size is determined by the following cumulative sum: $$\text{1st Entry Quantity} + (\text{1st Entry Quantity} \times x) + (\text{2nd Entry Quantity} \times x) + \dots + ((\text{n-1)th Entry Quantity} \times x)$$ #### **3. Entries** * The **1st Entry** is determined by the **Entry Sensitivity**. The first entry is automatically calculated based on an oversold condition; setting a higher sensitivity value will trigger the 1st entry in a more significant oversold situation. * Entries from the **2nd Entry onwards** are made sequentially based on the generated **Grid Spacing**. * The **Grid Spacing** is calculated as an equal interval: $$\text{Grid Spacing} = \frac{\text{Final Entry Distance}}{(\text{Number of Entries} - 1)}$$ #### **4. Exits** This strategy **does not distinguish between Stop-Loss and Take-Profit**. All entered quantities are liquidated simultaneously upon mean reversion. This transaction may result in either a loss or a profit. Generally: * If the price recovery is rapid, the trade finishes with a profit. * If the price recovery is slow, the trade finishes with a loss. Therefore, the **'resilience' or 'recovery speed'** of the underlying asset significantly influences the long-term performance of the strategy. 크립토 시장에 특화된 Long only전략입니다. DCA 방식의 분할 매수 전략이 대체로 이익 거래가 아닌 경우, 장기간 탈출하지 못할 리스크를 보완한 전략입니다. 이 전략은 다음과 같은 특징을 가지고 있습니다. ##### 1. 시장 (Markets) • 유동성이 풍부한 코인 무기한 선물 시장에서 거래한다. ##### 2. 포지션 크기 (Position Sizing) 인풋 값에 최초진입비율을 설정함으로써 1차 진입의 수량이 결정됩니다. - 추가 진입배수가 1일 때, 최대 진입 시 포지션 크기는 "1차 진입수량 * 진입횟수"에 의해 결정됩니다. - 추가 진입배수가 x일때, 1차진입물량 + (1차진입 물량 * x) + (2차진입 물량 * x) ..... + (n-1)차 진입물량 * x 의 방식으로 최대 진입 시 포지션 크기가 결정 됩니다 ##### 3. 진입 (Entries) - 1차 진입은 진입 둔감도에 의해 결정됩니다. 1차 진입은 과매도 상황을 자동적으로 계산하여 결정되며, 둔감도를 높은 값으로 설정하면 더 큰 과매도 상황에서 1차 진입이 결정됩니다. - 2차 이후의 진입은 생성된 그리드 간격에 의해 순차적으로 진입하게 됩니다. - 그리드 간격은 최종 진입 간격 / (진입 횟수 - 1) 으로 등간격으로 이루어집니다. ##### 4. 청산 (Exits) 이 전략은 손절과 익절을 구분하지 않습니다. 평균 회귀를 하는 경우 진입한 모든 물량을 일시에 청산하며, 이 거래는 손실 거래일 수도, 이익 거래일 수도 있습니다. 일반적으로, 가격 회복이 빠르게 되는 경우 이익 거래로 마무리되고, 가격 회복이 느린 경우 손실 거래로 마무리되기 때문에, 장기적으로 종목의 '회복탄력성'이 전략의 성과에 영향을 줄 수 있습니다.
Strategi Pine Script®
oleh sleepsystrade
Bollinger Bands Breakout StrategyHey guys check out this strategy script. Chart plotting: I use a classic plot of Bollinger Bands to define a consolidation zone, I also use a separate Trend Filter (SMA). Logic: When the price is above the SMA and above the Bollinger Upper Band the strategy goes Long. When the price is below the SMA and below the Bollinger Lower Band the strategy goes Short. Simple. Exits: TP and SL are a percentage of the price. Notes: This simple strategy can be used at any timeframe (I prefer the 15min for day trading). It avoids consolidation, when the price is inside the Bollinger Bands, and has a good success rate. Adjust the Length of the BB to suit your style of trading (Lower numbers=more volatile, Higher numbers=more restrictive). Also you can adjust the Trend Filter SMA, I presonally chose the 50 SMA. Finally the SL/TP can be also adjusted from the input menu. Test it for yourself! Have great trades!
Strategi Pine Script®
oleh kostastrovas
U.T.M.S v2🇷🇺 ОПИСАНИЕ (РУССКИЙ) U.T.M.S v2 — Чистый EMA-кроссовер с фильтрами Стратегия для 15м (в первую очередь) и 1ч таймфреймов. Генерирует сигналы при пересечении EMA(8) и EMA(19) только при подтверждении тренда, объёма, волатильности и времени суток. Каждая сделка закрывается по фиксированному Take Profit и Stop Loss. ✅ Минимум ложных входов ✅ Работает только в ликвидные часы ✅ Полная фильтрация шума и флэта 🔧 Настройки: Fast EMA / Slow EMA — периоды скользящих (по умолчанию 8 / 19) Take Profit % — уровень фиксации прибыли (рек. 2.5%) Stop Loss % — уровень стоп-лосса (рек. 2.0%) Фильтры (все включены по умолчанию): Use 1H Trend Filter — вход разрешён только по направлению тренда на 1H (EMA50 > EMA200 для лонга) Use Volume Filter — объём должен быть ≥ 1.5× среднего за 20 баров Min Volume Multiplier — нижний порог объёма (рек. 1.5) Max Volume Multiplier — верхний порог (рек. 3.0–4.0), отсекает аномальные пампы Use ATR Volatility Filter — минимальная волатильность (рек. 0.3%) Use Time Filter (UTC) — торговля только в часы высокой ликвидности: 12:00–18:00 и 20:00–02:00 UTC 💡 Идеальна для ручной торговли или подключения сигнальных ботов. 🇬🇧 DESCRIPTION (ENGLISH) U.T.M.S v2 — Clean EMA Crossover with Filters Strategy for 15m (primarily) and 1h timeframes. Generates signals when the EMA(8) and EMA(19) cross, only if trend, volume, volatility, and time of day are confirmed. Each trade is closed with a fixed Take Profit and Stop Loss. ✅ Low noise, high-quality signals ✅ Active only during high-liquidity hours ✅ Fully protected against flat and fakeouts 🔧 Inputs: Fast EMA / Slow EMA — moving average periods (default: 8 / 19) Take Profit % — profit target (suggested: 2.5%) Stop Loss % — stop loss level (suggested: 2.0%) Filters (all enabled by default): Use 1H Trend Filter — trades only in 1H trend direction (EMA50 > EMA200 for long) Use Volume Filter — volume must be ≥ 1.5× 20-bar average Min Volume Multiplier — minimum volume threshold (suggested: 1.5) Max Volume Multiplier — maximum volume cap (suggested: 3.0–4.0), filters out pumps/dumps Use ATR Volatility Filter — minimum volatility (suggested: 0.3%) Use Time Filter (UTC) — active only during high-liquidity sessions: 12:00–18:00 & 20:00–02:00 UTC 💡 Perfect for manual trading or webhook-based signal bots.
Strategi Pine Script®
oleh monoblane717
多指标量化交易DIY- The indicator includes a very large menu of leading tools, each with its own logic to determine uptrend or downtrend impulses. Highlights include: - Range Filter: Uses a dynamic centerline and bands computed via conditional EMA/SMA and range sizing to define directional movement. It can operate in a default mode or an alternative “DW” mode. - Rational Quadratic Kernel (RQK): Applies a kernel smoothing model (Nadaraya Watson) to detect uptrends and downtrends with a focus on noise reduction. - Supertrend, Half Trend, SSL Channel: Classic trend-following tools that derive direction from ATR-based bands or moving average channels. - Ichimoku Cloud and SuperIchi: Multi-component systems validating trend via cloud position, conversion/base line relationships, projected cloud, and lagging span. - TSI (True Strength Index), DPO (Detrended Price Oscillator), AO (Awesome Oscillator), MACD, STC (Schaff Trend Cycle), QQE Mod: Momentum and cycle tools that parse direction from crossovers, zero-line behavior, and momentum shifts. - Donchian Trend Ribbon, Chandelier Exit: Trend and exit tools that can validate breakouts or sustained trend strength. - ADX/DMI: Measures trend strength and directional movement via +DI/-DI relationships and minimum ADX thresholds. - RSI and Stochastic: Use crossovers, level exits, or threshold filters to gate entries based on overbought/oversold dynamics or relative strength trends. - Vortex, Chaikin Money Flow, VWAP, Bull Bear Power, ROC, Wolfpack Id, Hull Suite: A diverse set of directional, momentum, and volume-based indicators to suit different markets and styles. - Trendline Breakout and Range Detector: Price-behavior filters that confirm signals during breakouts or within defined ranges. Confirmation Filters - Each filter is optional. When enabled, it must validate the leading condition for a signal to pass. Examples: - EMA Filter: Requires price to be above a specified EMA for longs and below for shorts, filtering signals that contradict broader trend or baseline levels. - 2 EMA Cross and 3 EMA Cross: Enforce moving average cross conditions (fast above slow for long, the reverse for short) or a three-line stacking logic for more stringent trend alignment. - RQK, Supertrend, Half Trend, Donchian, QQE, Hull, MACD (crossover vs. zero-line), AO (zero line or AC momentum variants), SSL: Each adds its characteristic validation pattern. - RSI family (MA cross, exits OB/OS zones, threshold levels) plus RSI MA direction and RSI/RSI MA limits: Multiple ways to constrain signals via relative strength behavior and trajectories. - Choppiness Index and Damiani Volatility: Prevent entries during ranging conditions or insufficient volatility; choppiness thresholds and volatility states gate the trade. - VWAP, Volume modes (above MA, simple up/down, delta), Chaikin Money Flow: Volume and flow conditions that ensure signals happen in supportive liquidity or accumulation/distribution contexts. - ADX/DMI thresholds: Demand a minimum trend strength and directional DI alignment to reduce whipsaw trades. - Trendline Breakout and Range Detector: Confirm that the price is breaking structure or remains within active range consistent with the leading setup. - By combining several filters you can create strict, conservative entries or looser setups depending on your goals. Range Filter Engine - A core building block, the Range Filter uses conditional EMA and SMA functions to compute adaptive bands around a dynamic centerline. It supports two types: - Type 1: The centerline updates when price exceeds the band thresholds; bands define acceptable drift ranges. - Type 2: Uses quantized steps (via floor operations) relative to the previous centerline to handle larger moves in discrete increments. - The engine offers smoothing for range values using a secondary EMA and can switch between raw and averaged outputs. Its hi/lo bands and centerline compose a corridor that defines directional movement and potential breakout confirmation. Signal Construction - The script computes: - leadinglongcond and leadingshortcond : The primary directional signals from the chosen leading indicator. - longCond and shortCond : Final signals formed by combining the leading conditions with all enabled confirmations. Each confirmation contributes a boolean gate. If a filter is disabled, it contributes a neutral pass-through, keeping the logic intact without enforcing that condition. - Expiry Logic: The code counts consecutive bars where the leading condition remains true. If confirmations do not line up within the user-defined “Signal Expiry Candle Count,” the setup is abandoned and the signal does not trigger. - Alternation: An optional state ensures that long and short signals alternate. This can reduce repeated entries in the same direction without a clear reset. - Finally, longCondition and shortCondition represent the actionable signals after expiry and alternation logic. These drive the label plotting and alert conditions. Visualization - Buy and Sell Labels: When longCondition or shortCondition confirm, the script plots annotated labels directly on the chart, making entries easy to see at a glance. The labels use color coding and clear text tags (“long” vs. “short”). - Dashboard: A table summarizes the status of the leading indicator and all confirmations. Each row shows the indicator label and whether it passed (✔️) or failed (❌) on the current bar. This intensely practical UI helps you diagnose why a signal did or did not trigger, empowering faster strategy iteration and parameter tuning. - Failed Confirmation Markers: If a setup expires (count exceeds the limit) and confirmations failed to align, the script can mark the chart with a small label and provide a tooltip listing which confirmations did not pass. It’s a helpful audit trail to understand missed trades or prevent “chasing” invalid signals. - Data Window Values: The script outputs signal states to the data window, which can be useful for debugging or building composite conditions in multi-indicator templates. Inputs and Parameters - You control the indicator from a comprehensive input panel: - Setup: Signal expiry count, whether to enforce alternating signals, and whether to display labels and the dashboard (including position and size). - Leading Indicator: Choose the primary signal generator from the large list. - Per-Filter Toggles: For each confirmation, a respect... toggle enables or disables it. Many include sub-options (like MACD type, Stochastic mode, RSI mode, ADX variants, thresholds for choppiness/volatility, etc.) to fine-tune behavior. - Range Filter Settings: Choose type and behavior; select default vs. DW mode and smoothing. The underlying functions adjust band sizes using ATR, average change, standard deviation, or user-defined scales. - Because everything is customizable, you can adapt the indicator to different assets, volatility regimes, and timeframes. Alerts and Automation - The script defines alert conditions tied to longCondition and shortCondition . You can set these alerts in your chart to trigger notifications or webhook calls for automated execution in external bots. The alert text is simple, and you can configure your own message template when creating alerts in the chart, including JSON payloads for algorithmic integration. Typical Workflow - Select a Leading Indicator aligned with your style. For trend following, Supertrend or SSL may be appropriate; for momentum, MACD or TSI; for range/trend-change detection, Range Filter, RQK, or Donchian. - Add a few key Confirmation Filters that complement the leading signal. For example: - Pair Supertrend with EMA Filter and RSI MA Direction to ensure trend alignment and positive momentum. - Combine MACD Crossover with ADX/DMI and Volume Above MA to avoid signals in low-trend or low-liquidity conditions. - Use RQK with Choppiness Index and Damiani Volatility to only act when the market is trending and volatile enough. - Set a sensible Signal Expiry Candle Count. Shorter expiry keeps entries timely and reduces lag; longer expiry captures setups that mature slowly. - Observe the Dashboard during live markets to see which filters pass or fail, then iterate. Tighten or loosen thresholds and filter combinations as needed. - For automation, turn on alerts for the final conditions and use webhook payloads to notify your trading robot. Strengths and Practical Notes - Flexibility: The indicator is a toolkit rather than a single rigid model. It lets you test different combinations rapidly and visualize outcomes immediately. - Clarity: Labels, dashboard, and failed-confirmation markers make it easy to audit behavior and refine settings without digging into code. - Robustness: The expiry and alternation options add discipline, avoiding the temptation to enter late or repeatedly in one direction without a reset. - Modular Design: The logical gates (“respect…”) make the behavior transparent: if a filter is on, it must pass; if it’s off, the signal ignores it. This keeps reasoning clean. - Avoiding Overfitting: Because you can stack many filters, it’s tempting to over-constrain signals. Start simple (one leading indicator and one or two confirmations). Add complexity only if it demonstrably improves your edge across varied market regimes. Limitations and Recommendations - No single configuration is universally optimal. Markets change; tune filters for the instrument and timeframe you trade and revisit settings periodically. - Trend filters can underperform in choppy markets; likewise, momentum filters can false-trigger in quiet periods. Consider using Choppiness Index or Damiani to gate signals by regime. - Use expiry wisely. Too short may miss good setups that need a few bars to confirm; too long may cause late entries. Balance responsiveness and accuracy. - Always consider risk management externally (position sizing, stops, profit targets). The indicator focuses on signal quality; combining it with robust trade management methods will improve results. Example Configurations - Trend-Following Setup: - Leading: Supertrend uptrend for longs and downtrend for shorts. - Confirmations: EMA Filter (price above 200 EMA for long, below for short), ADX/DMI (trend strength above threshold with +DI/-DI alignment), Volume Above MA. - Expiry: 3–4 bars to keep entries timely. - Result: Strong bias toward sustained moves while avoiding weak trends and thin liquidity. - Mean-Reversion to Momentum Crossover: - Leading: RSI exits from OB/OS zones (e.g., RSI leaves oversold for long and leaves overbought for short). - Confirmations: 2 EMA Cross (fast crossing slow in the same direction), MACD zero-line behavior for added momentum validation. - Expiry: 2–3 bars for responsive re-entry. - Result: Captures momentum transitions after short-term extremes, with extra confirmation to reduce head-fakes. - Range Breakout Focus: - Leading: Range Filter Type 2 or Donchian Trend Ribbon to detect breakouts. - Confirmations: Damiani Volatility (avoid low-volatility false breaks), Choppiness Index (prefer trend-ready states), ROC positive/negative threshold. - Expiry: 1–3 bars to act on breakout windows. - Result: Better alignment to breakout dynamics, gating trades by volatility and regime. Conclusion - This indicator is a comprehensive, configurable framework that merges a chosen leading signal with an array of corroborating filters, disciplined expiry handling, and intuitive visualization. It’s designed to help you build high-quality entry signals tailored to your approach, whether that’s trend-following, breakout trading, momentum capturing, or a hybrid. By surfacing pass/fail states in a dashboard and allowing alert-based automation, it bridges the gap between discretionary analysis and systematic execution. With sensible parameter tuning and thoughtful filter selection, it can serve as a robust backbone for signal generation across diverse instruments and timeframes.
Strategi Pine Script®
oleh saodisengSeven
TalaJooy V1.31 𓅂💎 استراتژی معاملاتی TalaJooy V1.31 𓅂 TalaJooy (طلاجوی) یک چارچوب معاملاتی حرفه‌ای و کامل برای TradingView است که برای حذف حدس و گمان، احساسات و تصمیم‌گیری‌های هیجانی از فرآیند معاملات طراحی شده است. این محصول یک «اندیکاتور سیگنال‌دهی» ساده نیست؛ بلکه یک استراتژی (Strategy) کامل است که چهار وظیفه کلیدی را به صورت خودکار انجام می‌دهد: تحلیل بازار (بر اساس یک موتور امتیازدهی کمی) صدور سیگنال (ورود و خروج شفاف) مدیریت ریسک پویا (محاسبه خودکار حد ضرر) مدیریت حجم پوزیشن (محاسبه خودکار حجم بر اساس ریسک) هدف «طلاجوی» تبدیل معامله‌گری شهودی به یک فرآیند مکانیکی، مبتنی بر داده و مدیریت ریسک است. ⚙️ قابلیت‌های کلیدی (آنچه دریافت می‌کنید) این استراتژی مجهز به مجموعه‌ای از ابزارهای حرفه‌ای است که مستقیماً روی چارت شما اجرا می‌شوند: 🎯 ۱. سیگنال‌های ورود و خروج شفاف فلش‌های واضح خرید (▲) و فروش (▼) که نقاط دقیق ورود بر اساس منطق استراتژی را مشخص می‌کنند. این سیستم تنها زمانی سیگنال صادر می‌کند که فیلترهای روند، همسویی لازم را تایید کنند. 🛡️ ۲. مدیریت ریسک پویای ATR بزرگترین چالش معامله‌گران، تعیین حد ضرر (SL) مناسب است. این استراتژی حد ضرر را به صورت خودکار و پویا بر اساس نوسانات واقعی بازار (با استفاده از ATR) محاسبه می‌کند. نتیجه: در بازارهای پرنوسان، استاپ شما برای جلوگیری از استاپ‌هانت شدن، فاصله ایمن‌تری می‌گیرد و در بازارهای آرام، بهینه‌تر و نزدیک‌تر تنظیم می‌شود. 💰 ۳. محاسبه خودکار حجم پوزیشن دیگر نیازی به «ماشین حساب پوزیشن» ندارید. استراتژی به صورت اتوماتیک، حجم دقیق هر معامله را بر اساس درصد ریسک ثابتی که شما از کل سرمایه‌تان تعیین می‌کنید، محاسبه می‌نماید. این ویژگی، مدیریت سرمایه حرفه‌ای را در تمام معاملات شما تضمین می‌کند. 🎨 ۴. نواحی بصری سود و زیان (TP/SL) هنگامی که یک معامله باز است، این ابزار به صورت زنده، نواحی حد سود (سبز) و حد ضرر (قرمز) را مشابه ابزار پوزیشن خود تریدینگ ویو، مستقیماً روی چارت برای شما رسم می‌کند. 📈 ۵. پنل آمار عملکرد پیشرفته یک جدول آماری جامع که تمام معیارهای کلیدی عملکرد شما را به صورت زنده نمایش می‌دهد: سود و زیان خالص (دلاری و درصدی) ضریب سود (Profit Factor) نرخ موفقیت (Win Rate) تعداد معاملات سودده / زیان‌ده حداکثر افت سرمایه (Max Drawdown) و موارد دیگر... 🚦 ۶. آیکون‌های بازخورد معامله با آیکون‌های هوشمند، فوراً کیفیت معاملات بسته شده خود را ارزیابی کنید: 😎🚀 (سود ویژه و قابل توجه) 💰 (سود عادی) 🙈 (زیان) 📈 چگونه از این ابزار استفاده کنید؟ «طلاجوی» یک 'ماشین چاپ پول' جادویی نیست، بلکه یک ابزار تست و اجرای حرفه‌ای است. ۱. بک‌تست و بهینه‌سازی (Backtesting) مهم‌ترین قدرت این اسکریپت، قابلیت Strategy بودن آن است. شما می‌توانید این استراتژی را روی هر جفت‌ارز و تایم فریمی که معامله می‌کنید (طلا، کریپتو، جفت‌ارزها و...) بک‌تست بگیرید تا آمار عملکرد آن را مشاهده کنید. ۲. تنظیم پارامترها از طریق منوی تنظیمات، پارامترهای کلیدی مانند درصد ریسک، نسبت ریسک به ریوارد (R:R)، و فیلترهای زمانی را مطابق با سبک معاملاتی و دارایی مورد نظر خود بهینه‌سازی کنید. ۳. اجرای سیستماتیک پس از یافتن تنظیمات بهینه در بک‌تست، در معاملات زنده به سیگنال‌ها پایبند بمانید و اجازه دهید منطق مکانیکی، معاملات شما را مدیریت کند. ⚠️ سلب مسئولیت مهم (مطابق با قوانین TradingView) این اسکریپت صرفاً یک ابزار تحلیلی و معاملاتی است و نباید به عنوان سیگنال مالی یا توصیه‌ای برای خرید و فروش تلقی شود. تمام معاملات دارای ریسک هستند و نتایج گذشته تضمین‌کننده عملکرد آینده نمی‌باشد. لطفاً قبل از استفاده از این استراتژی در حساب واقعی، آن را به طور کامل در حالت دمو یا بک‌تست ارزیابی کنید. مسئولیت تمامی سودها و زیان‌ها بر عهده خود معامله‌گر است. 💎 TalaJooy V1.31 𓅂 Trading Strategy TalaJooy (meaning "Gold Seeker") is a complete, professional trading framework for TradingView, designed to remove guesswork, emotion, and impulsive decisions from your trading process. This is not a simple signal indicator; it is a complete Strategy script that automates four key tasks: Market Analysis (Based on a quantitative scoring engine) Signal Generation (Clear entries and exits) Dynamic Risk Management (Automated Stop Loss calculation) Position Sizing (Automated trade sizing based on risk) The goal of "TalaJooy" is to transform intuitive trading into a mechanical, data-driven, and risk-managed process. ⚙️ Key Features (What You Get) This strategy comes equipped with a suite of professional tools that run directly on your chart: 🎯 1. Clear Entry & Exit Signals Receive unambiguous Buy (▲) and Sell (▼) arrows identifying precise entry points based on the strategy's logic. The system only generates signals when its trend-confirmation filters are aligned. 🛡️ 2. Dynamic ATR Risk Management A trader's biggest challenge is setting a proper Stop Loss (SL). This strategy calculates your SL automatically and dynamically based on real-time market volatility (using ATR). The Benefit: In volatile markets, your stop is placed at a safer distance to avoid being "stopped out" by noise. In calm markets, it's set tighter and more efficiently. 💰 3. Automated Position Sizing Stop using external "position size calculators." The strategy automatically calculates the exact trade size for every position based on a fixed risk percentage of your total equity (which you define). This enforces professional money management on every trade. 🎨 4. Visual Profit & Loss (TP/SL) Zones While a trade is active, this tool plots live, visual zones for your Take Profit (green) and Stop Loss (red) targets, similar to TradingView's native "Long/Short Position" tool. 📈 5. Advanced Performance Stats Panel A comprehensive statistics table displays all your key performance metrics in real-time: Net Profit (% and $) Profit Factor Win Rate Win / Loss Trade Count Max Drawdown And more... 🚦 6. Smart Trade Feedback Icons Instantly review the quality of your closed trades with intelligent emoji feedback: 😎🚀 (Exceptional Profit) 💰 (Standard Profit) 🙈 (Loss) 📈 How to Use This Tool "TalaJooy" is not a "magic money machine"; it is a professional-grade tool for testing and execution. 1. Backtesting & Optimization The most powerful feature of this script is its Strategy component. You can backtest it on any asset or timeframe you trade (Gold, Crypto, Forex, etc.) to see its historical performance data. 2. Parameter Tuning Use the settings menu to optimize key parameters—such as Risk Percentage, Risk:Reward Ratio, and core filter settings—to match your personal trading style and preferred assets. 3. Systematic Execution After identifying optimal settings via backtesting, adhere to the signals in your live trading and let the mechanical logic manage your trades. ⚠️ Important Disclaimer (TradingView Compliant) This script is provided for educational and analytical purposes only. It is not financial advice or a recommendation to buy or sell any asset. All trading involves substantial risk. Past performance is not indicative of future results. Please thoroughly evaluate this strategy via backtesting or paper trading before deploying it with real funds. The user assumes full responsibility for all profits and losses incurred.
Strategi Pine Script®
oleh TheMandalor
USDJPY MA Zone Entry Strategy USD/JPY tested only.A consistent strategy that gives me alerts each time my conditions are met. I am a funded prop firm trader. this strategy gives 45-70% annual returns. the sequence for this strategy is: After 4 stop loss hits, place a trade on the NEXT ENTRY ALERT ONCE: (-.188) pips draw back towards the stop loss. (this turns the Strat from 1-3 RISK/REWARD to 1-7+ RISK/REWARD). keep the Stop Loss the same (-.300) away from your entry. Take Profit placed at (+1.488) from entry. if 3 losses in a row happens AFTER you've followed these instructions, don't trade again UNTIL the strategy has a TAKE PROFIT gain, then the sequence starts over again. that is this strategies losing streak. after that streak is over. the strategy will be back to give you profits.
Strategi Pine Script®
oleh theprocess223