Mulai

Motif-Motif Chart

Michael 13/100 SMA Crossover (Time Filtered)This indicator plots a simple moving average (SMA) crossover system using a 13-period SMA and a 100-period SMA. A Buy signal appears when the 13-period SMA crosses above the 100-period SMA, and a Sell signal appears when the 13-period SMA crosses below the 100-period SMA. Signals are restricted to a specific active trading window between 08:00 and 17:00 GMT, helping to reduce noise during off-hours or low-liquidity periods. The moving averages themselves remain visible at all times, but Buy/Sell markers only appear when a crossover occurs during the defined session. This tool helps traders identify trend shifts, momentum changes, and potential entry/exit points while avoiding signals during quieter market conditions.
Indikator Pine Script®
oleh moubarakghislain3
Levels S/R Boxes + Gaps + SL/TPWhat It Does: Automatically identifies and displays: 🟦 Support/Resistance zones (horizontal boxes) 🟨 Price gaps (unfilled gaps from market open/close) 🎯 Stop Loss levels (where to protect trades) 💰 Take Profit levels (where to exit trades) Purpose: Shows you exactly where price is likely to bounce, reverse, or break through. Best Practices: ✅ Trade at the boxes - Don't chase price ✅ Use SL/TP lines - Automatic risk management ✅ Wait for confirmation - Candle pattern + S/R level ✅ Gaps get filled - Trade towards yellow boxes ✅ Solid lines = stronger - Prefer 3+ touch levels ❌ Don't ignore SL - Always protect yourself ❌ Don't trade middle - Wait for S/R zones ❌ Don't fight strong levels - Respect solid boxes Settings (Quick Reference): S/R Strength: 10 (default) - Lower = more levels, Higher = fewer stronger levels Max Levels: 5 (default) - Number of S/R boxes to show Show Gaps: ON - Display yellow gap boxes Show SL/TP: ON - Display entry/exit suggestions
Indikator Pine Script®
oleh ognenmitev
KIRA INVESTORS📈 KIRA MOMENTUM STRATEGY – BUY & SELL Title: KIRA EMA 9–21 + VWAP 🟢 BUY RULE EMA 9 crosses above EMA 21 Price closes above VWAP 🔴 SELL RULE EMA 9 crosses below EMA 21 Price closes below VWAP 🚫 NO TRADE ZONE EMAs tangled Price chopping near VWAP 🎯 TIMEFRAMES & RISK TF: 5–15 min Stop-loss: Swing high / low Risk ≤ 1% per trade 💡 WHY IT WORKS EMA crossover → Trend direction VWAP → Confirms institutional bias Only trades strong momentum moves
Indikator Pine Script®
oleh kirainvestors
Kira EMA 9-21 + VWAP Buy/Sell🔥 KIRA MOMENTUM SETUP – BUY & SELL SYSTEM Simple • Powerful • Trend-Based ✅ BUY CONDITION 🟢 EMA 9 crosses ABOVE EMA 21 AND Price closes ABOVE VWAP 🔴 SELL CONDITION EMA 9 crosses BELOW EMA 21 AND Price closes BELOW VWAP 🚫 NO TRADE ZONE ❌ EMAs tangled ❌ Price chopping around VWAP 🎯 BEST TIMEFRAMES ✅ 5-Minute ✅ 15-Minute (Indices & highly liquid stocks) ⚠️ RISK RULE • Buy SL ➝ Below recent swing low • Sell SL ➝ Above recent swing high • Risk per trade ≤ 1%
Indikator Pine Script®
oleh kirainvestors
Adaptive Support & Resistance ProAdaptive Support & Resistance Pro – Description Adaptive Support & Resistance Pro is an advanced S/R tool designed to automatically identify key support and resistance zones based on a combination of RSI, CMO dynamics, and pivot logic. This indicator provides precise and reactive levels that form only when specific technical conditions are met, filtering out noise and delivering more reliable S/R signals. It is ideal for technical traders who want to understand where price naturally pauses, reverses, or consolidates—without the need to manually draw lines on every chart. 🔍 Key Features 1. Automatic Support & Resistance Detection The indicator uses: RSI (9) CMO logic based on HMA Pivot structure (len = 2) to generate valid Support and Resistance zones. A level is drawn only when all required conditions align, preventing false or weak signals. 2. Multi-Timeframe Analysis (MTF) You can view the chart on one timeframe (e.g., 5m) and display Support/Resistance levels from another timeframe (e.g., 1H, 4H, D) at the same time. This allows for: viewing higher-timeframe structures on lower charts, better planning of entries and exits, avoiding trades inside strong zones that may not be visible on the current timeframe. All of this is controlled through the input: S/R Timeframe 3. Adjustable Line Thickness (visual enhancement) Using the input: Line Width you can increase the thickness of support/resistance lines to: make important zones more visible, improve chart readability, emphasize S/R levels according to your visual preference. This is especially useful on fast markets (Forex, Crypto) and on higher timeframes where clarity of levels is essential. 4. Clear distinction between Support and Resistance Support lines have their own customizable color (default: green) Resistance lines have their own customizable color (default: red) You can freely adjust the colors to match your personal TradingView layout or theme. 5. Alerts (Notification System) The built-in alert: "New S/R line" triggers whenever a new support or resistance level is detected. This helps you: monitor important levels without constantly watching the chart, react quickly to new structure signals, stay aware of market changes in real time. 🎯 How to Use the Indicator Support levels often indicate potential reversals or long-entry opportunities. Resistance levels highlight areas where price may reverse downward or form short setups. The best performance is achieved when combining this indicator with: price action, EMA structure, confirmation zones, breakout logic, trend filters. MTF usage is highly recommended: Analyze higher-timeframe S/R while trading lower-timeframe setups. ⚠️ Disclaimer This indicator does not generate direct buy or sell signals. Its purpose is to assist in market analysis and highlight areas where price is likely to react. 📌 Conclusion Adaptive Support & Resistance Pro combines the strongest elements of automated S/R mapping: precision, reduced noise, multi-timeframe flexibility, and advanced logic based on RSI, CMO, and pivot structure. It is perfect for traders who want: clean and accurate S/R levels, higher-timeframe insight while trading lower charts, customizable and visually enhanced structure mapping.
Indikator Pine Script®
oleh Aleksin_Aleksandar
6
2-Close + Bar 5 Reversal (Scan Ready)Bulkowski's Bullish 2-Step Reversal Bar 1 Any price bar. Bar 2 Price makes a low below bar 1 with a lower close, too. Bar 3 Price has a low below bar 2 but a close above bar 1 (which will also be above bar 2's close). Bars 1 to 3 form a 2-close reversal pattern. Bar 4 Makes a close below bar 3's close. Bar 5 Has a low below bar 4 but closes above bars 3 and 4. Breakout Breaks out upward 79% of the time in stocks. From his page: thepatternsite.com
Indikator Pine Script®
oleh toppermost
Morning ORB FVG Trigger✅ Overview Morning ORB FVG Trigger is a complete intraday trading framework built around: A Morning Opening Range Breakout (ORB) The first Fair Value Gap (FVG) after that breakout Strict risk management and position sizing Optional HTF trend filter (Daily / Weekly / Monthly) Optional Daily ATR filter to avoid extreme days The script is designed for futures / indices / FX on intraday charts up to 15 minutes and for traders who want a clean, mechanical entry framework with clear risk. 🧠 Core idea Define a morning opening range (e.g. 09:30–09:45). Wait for a clean breakout above/below that range. After the breakout, wait for the first FVG in breakout direction, confirmed by the next candle (no immediate full reclaim). Use a chosen stop logic + R:R factor to build risk/reward boxes. Calculate position size based on your account risk. (Optional) Only take trades: In the direction of the HTF EMA trend (D/W/M). On days where the morning range is within a band of the Daily ATR. You can also disable all signals/boxes and use the script just as a visual ORB tool. ⏰ 1. ORB / Morning Range Inputs (Main section) Morning Range Session Time window of the opening range in exchange time Example: 09:30–09:45 for a 15-minute ORB. You can type custom ranges (e.g. 09:30–09:35 for a 5-minute ORB). Risk/Reward (TP factor) Multiplier for the take-profit distance relative to the stop. 2.0 = TP is 2× the stop distance 1.5 = TP is 1.5× the stop distance Show ORB range If enabled, draws: ORB high/low lines ORB labels (e.g. 15min ORB high / low) Optional midline Extend ORB lines to the right (bars) How many bars to extend the ORB high/low horizontally beyond the ORB itself. Trade box width (bars) Horizontal width (in bars) of: Red risk box (entry–stop) Green reward box (entry–TP) Implementation details The ORB is always calculated on 1-minute data internally, so it stays precise even on 5m/15m charts. The script only works on intraday timeframes up to 15 minutes. 📦 2. FVG Block Group: “FVG” Threshold % Minimum size of an FVG in % of price. 0 = every FVG Higher values = only larger gaps Auto threshold (from volatility) If enabled, the minimum FVG size is derived from historical volatility instead of a fixed percentage. Allow breakout FVG partly inside ORB Off (default): the FVG must lie fully outside the ORB. On: the breakout FVG itself may still overlap the ORB a bit, as long as it is the first one attached to the breakout move. Enable FVG entry signals, boxes & alerts On: full system – FVG detection, entry labels, risk/TP boxes, alerts. Off: no entries, no risk/TP boxes, no alerts. You only get the ORB and (optionally) the HTF dashboard, so you can trade your own setups. Entry mode Entry mode (Mid / Edge / NextOpen) Mid – Entry at the midpoint of the FVG. Edge – Long at the upper FVG edge, short at the lower FVG edge. NextOpen – No limit order in the gap. Entry is placed at the next bar open after FVG confirmation. Edge offset (ticks) Additional offset for Edge entries: Long: +ticks = a bit above the FVG (more conservative) -ticks = deeper into the FVG (more aggressive) Short: +ticks = a bit below the FVG -ticks = deeper into the FVG FVG detection logic Uses a LuxAlgo-style 3-candle FVG pattern (gap between candle 1 and 3). Only one FVG is taken: the first valid FVG after the ORB breakout in breakup direction. The FVG candle is the middle bar; the script: Detects the FVG on the previous bar. Waits for the current bar to confirm it: Bullish: current low must stay above the lower FVG boundary Bearish: current high must stay below the upper FVG boundary Only then an entry signal is generated. 🛑 3. Stop Logic Group: “Stop Logic” Stop mode (PrevBar / Pivot / FVG Candle) PrevBar – Stop at the low/high of the candle before the FVG (tight/aggressive). FVG Candle – Stop at the low/high of the FVG candle itself (medium). Pivot – Stop at the most recent swing high/low using pivotLeft / pivotRight pivots (more conservative). Ticks (stop buffer) Offset (in ticks) from the selected stop level. > 0 = further away (more room, more risk) < 0 = closer (tighter stop) Pivot left / Pivot right Number of candles left/right to define a swing high/low when using Pivot stop mode. Typical intraday values: 2–3. The script also sanity-checks the stop: if the calculated stop would be invalid (e.g. above entry in a long), it moves it by a minimal distance (2 ticks) to keep a valid risk. 📈 4. HTF Trend Filter (Daily / Weekly / Monthly) Group: “HTF Trend Filter” Enable HTF trend filter If enabled, trades are only allowed: Long when at least 2 of D/W/M closes are above their EMA Short when at least 2 of D/W/M closes are below their EMA EMA length (D/W/M) EMA length for all three higher timeframes (Daily, Weekly, Monthly). This helps focus entries in the direction of the dominant higher-timeframe trend. 📊 5. ATR Filter (Daily) Group: “ATR Filter (Daily)” Use daily ATR filter If enabled, the height of the ORB (ORB high – ORB low) must be within a band of the Daily ATR to allow any signals. Daily ATR length ATR period on the Daily timeframe. Min ORB size vs ATR Lower bound: Example: 0.3 → ORB must be at least 0.3 × Daily ATR 0.0 = no minimum. Max ORB size vs ATR Upper bound: Example: 1.5 → ORB must be ≤ 1.5 × Daily ATR 0.0 = no maximum. If the ORB is too small (choppy) or too large (exhausted move), no breakout or FVG signal will be generated on that day. 🧭 6. HTF Dashboard & Signal Labels Group: “HTF Trend Dashboard” Show HTF dashboard Draws a small label at the top of the chart showing: HTF Trend (EMA X) D: UP/FLAT/DOWN W: UP/FLAT/DOWN M: UP/FLAT/DOWN Dashboard position Top Right, Top Center, Top Left – places the dashboard at the top. Over Risk Info – no top dashboard; instead, the HTF trend info is shown as a label near the risk box when a new signal appears. Lookback (bars) for top anchor How many bars to use to determine the top price level for dashboard placement. Show HTF trend above risk box on signal Only relevant if Dashboard position = Over Risk Info. When enabled, a small HTF label appears near the risk box for each new trade. Signal label vertical offset (ticks) Vertical spacing between risk info label and HTF label. Minimum spacing HTF/Risk (ticks) Ensures a minimum vertical distance so the two labels don’t overlap. HTF signal label X offset (bars) Horizontal offset (left/right) relative to the risk info label. ⏳ 7. ORB–FVG Filters (Session & Time Window) Group: “ORB FVG Filter” Only same session day If enabled, FVG entries are only allowed on the same calendar day as the ORB. When the date changes, all state & drawings are reset. Limit hours after ORB Enables a time window after the ORB end. Trading window after ORB (hours) Length of that window in hours. Example: 2.0 → FVG signals only in the first 2 hours after ORB end. 💰 8. Risk Management & Position Sizing Group: “Risk Management” Calculate position size If enabled, the script computes suggested mini and micro contract size for you. Account size Your trading account size (in account currency). Risk mode Percent – risk is a % of account size (Account risk %). Fixed amount – risk is a fixed dollar amount (Fixed risk ($)). Account risk % Risk per trade as a percentage of account size (e.g. 1.0 for 1%). Fixed risk ($) Fixed risk per trade in dollars when using Fixed amount mode. Micro factor (vs mini) How much a micro contract is worth relative to a mini. Example: 0.1 → one micro moves 1/10 of one mini. Risk Info label For each new trade, a label is shown above the boxes with: Stop distance in price and $ risk per mini Max risk allowed for the trade Suggested mini and micro size Text like: Suggested: 2 mini Suggested: 5 micro or Suggested: no trade This makes the script especially useful for prop-firm rules or strict risk discipline. 🎨 9. Visual Style (Boxes, Labels, ORB Lines) Group: “Box & Label Style (Trade)” Label font size (Very small, Small, Normal, Large) Entry label BG / text color Stop label BG / text color TP label BG / text color Risk info BG / text color Risk box color (entry–stop zone) Reward box color (entry–TP zone) Group: “ORB Style” ORB high line color ORB low line color ORB line width ORB label font size ORB label background color ORB label text color Show ORB midline ORB midline color / width / style (Solid / Dashed / Dotted) ⚠️ 10. Alerts Group: “Alerts” The script defines three alert conditions: Long entry FVG breakout Triggered when a new long signal appears. Short entry FVG breakout Triggered when a new short signal appears. FVG entry (long/short) Generic alert for any new signal (long or short). To use them: Add the indicator to the chart. Open the Alerts dialog → “Condition”. Select this script and one of the alert conditions. Set your preferred expiration and notification settings. Alerts only fire when Enable FVG entry signals, boxes & alerts is on. 🧩 11. How the trading logic flows (summary) Build ORB on 1-minute data during the selected session. Optionally reject the day if ORB is outside the ATR bounds. Wait for a breakout (close above high or below low), respecting HTF trend filter. After breakout, look for the first valid FVG in that direction: Outside the ORB (unless breakout FVG allowed inside) Confirmed by the next candle (no full reclaim) Once confirmed: Compute entry, stop, target. Draw risk/reward boxes and all labels. Optionally show HTF signal label over the risk info. Trigger alerts if enabled. If you disable FVG signals, only steps 1–3 (plus dashboard) are effectively active. ⚠️ 12. Notes & Disclaimer Script is intended for intraday trading up to 15-minute timeframes. All signals are mechanical and do not guarantee profitability. Always backtest and forward-test on your own data before risking real money. This script is for educational purposes only and is not financial advice. 🚀 Quick-start guide Add the script to your chart Use an intraday timeframe ≤ 15 minutes (1m, 3m, 5m, 15m). Works best on liquid indices, futures, FX and large-cap stocks. Set the Morning Range In “Morning Range Session” choose the exchange’s opening window. Examples US index futures (CME): 08:30–08:45 or 08:30–08:35 US stocks (NYSE/Nasdaq): 09:30–09:45 or 09:30–09:35 The ORB is always calculated on 1-minute data internally, so the range stays accurate on higher intraday charts. Keep the default filters at first HTF Trend Filter: ON EMA length = 20 This will only allow trades in the direction of the dominant D/W/M trend. ATR Filter: OFF (optional; you can enable later once you’re comfortable). Use the full trade system In the FVG group leave “Enable FVG entry signals, boxes & alerts” = ON Entry mode: Mid Stop mode: FVG Candle or PrevBar Risk/Reward: 2.0 as a starting point. Set your risk Turn on “Calculate position size”. Enter your Account size and choose either: Risk mode = Percent (e.g. 1.0 = 1% per trade), or Risk mode = Fixed amount (e.g. $250 per trade). The risk info label will show: Stop distance in price and $/contract Max allowed risk Suggested mini and micro contract size. Enable alerts (optional) Open the Alerts dialog → Condition: this script. Choose one of: Long entry FVG breakout Short entry FVG breakout FVG entry (long/short) Choose “Once per bar” or “Once per bar close”, and your preferred notification type. Replay & journal Use the TradingView bar replay tool to step through past days. Focus on: How the ORB defines the structure. How the first confirmed FVG outside the ORB behaves. Whether the risk/TP levels fit your own style and product. 🎛 Recommended settings & profiles These are starting points, not rules. Always adapt to the instrument and your own risk tolerance. 1. Conservative / Trend-following Timeframe: 5m or 15m Morning Range Session: 15-minute ORB around the cash or futures open FVG Threshold %: 0.05–0.1 (filter out very small gaps) Auto threshold: OFF (keep it simple) Allow breakout FVG partly inside ORB: OFF Enable FVG entry signals/boxes/alerts: ON Entry mode: Mid Stop Logic Stop mode: Pivot Pivot left/right: 2–3 Stop buffer: +1–2 ticks HTF Trend Filter Enabled: ON EMA length: 20 ATR Filter Enabled: ON Daily ATR length: 14 Min ORB vs ATR: 0.3–0.4 Max ORB vs ATR: 1.2–1.5 Risk Management Risk mode: Percent Account risk: 0.5–1.0% Idea: Only trade when the higher-timeframe trend supports the move and the opening range is of a “normal” size for the current volatility. 2. Balanced / Intraday directional Timeframe: 3m or 5m FVG Threshold %: 0.02–0.05 Auto threshold: ON (lets the script adapt to volatility) Allow breakout FVG partly inside ORB: ON (first breakout FVG may partly sit inside the ORB) Entry mode: Edge Edge offset (ticks): 0 or +1 Stop Logic Stop mode: FVG Candle Stop buffer: 0–1 ticks HTF Trend Filter Enabled: ON ATR Filter Enabled: OFF (optional) Risk Management Risk mode: Percent Account risk: 1.0–1.5% (if this fits your plan) Idea: Slightly more aggressive entries at the gap edge, still aligned with HTF trend, but with more flexibility on ATR. 3. Aggressive / Scalping around the ORB Timeframe: 1m or 3m FVG Threshold %: 0.0–0.02 Auto threshold: ON Allow breakout FVG partly inside ORB: ON Entry mode: NextOpen or Edge with a negative offset (deeper into the gap) Stop Logic Stop mode: PrevBar Stop buffer: 0 or -1 tick HTF Trend Filter Enabled: OFF (or ON but treat as soft guidance) ATR Filter Enabled: OFF Risk Management Risk mode: Percent Account risk: lower, e.g. 0.25–0.5% per trade Idea: More trades and tighter stops. Best for experienced traders who understand the limitations of scalping and whipsaw risk. Final reminder All of these are templates, not guarantees: Always check how the system behaves on your market and session. Start on replay and demo before trading real money. Adjust filters (HTF, ATR, thresholds) until the signals fit your personal approach.
Indikator Pine Script®
oleh SebastianMaywald
1
PyraTime Harmonic 369Concept and Methodology PyraTime Harmonic 369 is a quantitative time-projection tool designed to apply Modular Arithmetic to market analysis. Unlike linear time indicators, this tool projects non-linear integer sequences derived from Digital Root Summation (Base-9 Reduction). The core logic utilizes the mathematical progression of the 3-6-9 constants. By anchoring to a user-defined "Origin Pivot," the script projects three distinct harmonic triads to identify potential Temporal Confluence—moments where mathematical time cycles align with price action. Technical Features This script focuses on the Standard Scalar (1x) projection of the Digital Root sequence: The Root-3 Triad (Red): Projects intervals of 174, 285, 396. (Mathematical Sum: 1+7+4=12→3) The Root-6 Triad (Green): Projects intervals of 417, 528, 639. (Mathematical Sum: 4+1+7=12→3, inverted) The Root-9 Triad (Blue): Projects intervals of 741, 852, 963. (Mathematical Sum: 7+4+1=12→3... completion to 9) How to Use Set Anchor: Input the time of a significant High or Low in the settings. Select Resolution: This tool is optimized for 1-minute (Micro-Harmonics) and 15-minute (Intraday Harmonics) charts. Analyze Clusters: The vertical lines represent calculated harmonic intervals. Traders look for "Clusters" where a Root-3 and Root-9 cycle land on adjacent bars, indicating a high-probability pivot. System Architecture & Version Comparison This script represents the foundational layer of the PyraTime ecosystem. This Script (PyraTime Harmonic 369): Scalar: Standard 1x Multiplier only. Focus: Intraday & Micro-structure (1m, 15m). Engine: Core Digital Root Integers. PyraTime Harmonic Matrix (Advanced Edition): Scalar Engine: Unlocks Quad-Fractal (4x), Tri-Fractal (3x), and Bi-Fractal (2x) multipliers for institutional cycle analysis. Apex Logic: Auto-detection of the "963" Completion Sequence (Gold Highlight). Event Horizon: Includes a live Predictive Dashboard that calculates the time-delta to the next harmonic event across all scalar groups. Disclaimer This tool is for the educational analysis of Number Theory in financial markets. It projects time intervals and does not predict price direction. Past performance does not guarantee future results.
Indikator Pine Script®
oleh PyraTime
1