Mulai

Breakout-strategy

DkS Market Structure Breakout Strategy Crypto & ForexDkS Market Structure Breakout Strategy Crypto & Forex 🔍 Overview DkSPro – Universal Market Analysis is a structure-based trading strategy designed for Crypto and Forex markets, focused on trend alignment, breakout confirmation, and volume validation. This strategy is built to filter low-quality trades, avoid ranging conditions, and reduce false breakouts by requiring multiple layers of confirmation before any trade is executed. It is intended for scalping and intraday trading, prioritizing consistency and risk control over trade frequency. 🧠 Strategy Logic (How It Works) DkSPro follows a sequential decision process, not a single-indicator signal: Trend Bias (EMA Structure) A fast and slow EMA define the directional bias. Long trades are only allowed during bullish EMA alignment. Short trades are only allowed during bearish EMA alignment. This prevents counter-trend and ranging-market entries. Market Structure & Breakout Validation The strategy identifies recent swing highs and lows. Trades are triggered only after a confirmed breakout of structure, not during consolidation. This avoids early entries and false momentum moves. Volume Confirmation Volume must exceed its moving average by a defined multiplier. This ensures participation and filters out low-liquidity breakouts. Volume thresholds adapt depending on the selected trading mode. Momentum Confirmation (RSI) RSI is used strictly as a momentum filter, not as a standalone signal. It confirms that price movement aligns with the breakout direction. Risk Management (Mandatory) Every position includes a predefined Stop Loss and Take Profit. Position sizing is based on a fixed percentage of equity, keeping risk per trade within sustainable limits. All conditions must align simultaneously; otherwise, no trade is executed. ⚙️ Trading Modes SAFE Mode Stronger volume and RSI thresholds Fewer trades, higher selectivity Designed for risk control and consistency AGGRESSIVE Mode Slightly relaxed filters Higher trade frequency during strong momentum Intended for experienced users only 📊 Markets & Assets This strategy has been actively used and tested on: 🟢 Crypto (Binance / Binance.US) SOL-USDT XRP-USDT Other high-liquidity pairs (BTC, ETH) Crypto mode benefits from stronger volume confirmation to adapt to higher volatility. 🔵 Forex Major pairs such as EURUSD, GBPUSD, USDJPY Optimized for liquid markets with lower relative volume The same structural logic applies to both markets, with volume behavior naturally adapting to each asset class. ⏱ Recommended Timeframes Crypto: 5m – 15m Forex: 15m – 1H Lower timeframes (1m) are not recommended due to noise and unreliable volume behavior. 🧪 Backtesting & Settings Transparency Default strategy properties are intentionally conservative to reflect realistic conditions: Initial capital: $20,000 Position size: 2% of equity Commission: 0.08% Slippage: 1 tick Fixed Stop Loss and Take Profit on every trade Backtests should be performed on sufficient historical data (ideally 6–12 months) to ensure a statistically meaningful sample size (100+ trades). 📈 Originality & Usefulness DkSPro is not a simple indicator mashup. Each component serves a specific role in a layered confirmation system: EMAs define direction Structure defines timing Volume validates participation RSI confirms momentum Risk management controls exposure Removing any layer significantly reduces signal quality. The strategy is designed as a complete decision framework, not a signal generator. ⚠️ Important Notes This script is an analysis and execution tool, not financial advice. Market conditions change, and no strategy performs well in all environments. Users are encouraged to backtest, forward test, and adjust position sizing according to their own risk tolerance. 🧩 Version Notice This publication represents a consolidated and refined version of an internal experimental script. No parallel or duplicate versions are intended. All future improvements will be released exclusively using TradingView’s Update feature. 🇪🇸 Descripción en Español (Resumen) DkSPro es una estrategia basada en estructura de mercado, diseñada para Crypto y Forex, que combina tendencia, ruptura de estructura, volumen y control de riesgo. Solo opera cuando todas las condiciones se alinean, evitando rangos, falsas rupturas y sobreoperar. Ha sido utilizada en Binance con pares como SOL-USDT y XRP-USDT, así como en Forex, siempre con gestión de riesgo fija y condiciones realistas.
Strategi Pine Script®
oleh dksniewieders
Volume Profile Auto POC📌 Overview Volume Profile Auto POC is a trend-following strategy that uses the automatically calculated Point of Control (POC) from the volume profile, combined with ATR zones, to capture reversals and breakouts. By basing decisions on volume concentration, it dynamically visualizes the price levels most watched by market participants. ⚠️ This strategy is provided for educational and research purposes only. Past performance does not guarantee future results. 🎯 Strategy Objectives Automatically detect the volume concentration area (POC) to improve entry accuracy Optimize risk management through ATR-based volatility adjustment Provide early and consistent signals when trends emerge ✨ Key Features Automatic POC Detection : Updates the volume profile over a defined lookback window in real time ATR Zone Integration : Defines a POC ± 0.5 ATR zone to clarify potential reversals/breakouts Visual Support : Plots the POC line and zones on the chart for intuitive decision-making 📊 Trading Rules Long Entry: Price breaks above the POC + 0.5 ATR zone Volume is above average to support the breakout Short Entry: Price breaks below the POC - 0.5 ATR zone Volume is above average to support the downside move Exit (or Reverse Position): Price returns to the POC area Or touches the ATR band ⚙️ Trading Parameters & Considerations Indicator Name: Volume Profile Auto POC Parameters: Lookback Bars: 50 Bins for Volume Profile: 24 ATR Length: 14 ATR Multiplier: 2.0 🖼 Visual Support POC line plotted in red POC ± 0.5 ATR zone displayed as a semi-transparent box ATR bands plotted in blue for confirmation 🔧 Strategy Improvements & Uniqueness This strategy is inspired by traditional Volume Profile + ATR analysis, while adding the improvement of a sliding-window mechanism for automatic POC updates. Compared with conventional trend-following approaches, its strength lies in combining both price and volume perspectives for decision-making. ✅ Summary Volume Profile Auto POC automatically extracts key market levels (POC) and combines them with ATR-based zones, providing a responsive trend-following method. It balances clarity with practicality, aiming for both usability and reproducibility. ⚠️ This strategy is based on historical data and does not guarantee future profits. Always use proper risk management when applying it.
Indikator Pine Script®
oleh PakunFX
ZVOL — Z-Score Volume Heatmapⓩ ZVOL transforms raw volume into a statistically calibrated heatmap using Z-score thresholds. Unlike classic volume indicators that rely on fixed MA comparisons, ZVOL calculates how many standard deviations each volume bar deviates from its mean. This makes the reading adaptive across timeframes and assets, in order to distinguish meaningful crowd behavior from random volatility. 📊 The core display is a five-zone histogram, each encoded by color and statistical depth. Optional background shading mirrors these zones across the entire pane, revealing subtle compression or structural rhythm shifts across time. By grounding the volume reading in volatility-adjusted context, ZVOL inhibits impulsive trading tactics by compelling the structure, not the sentiment, to dictate the signal. 🥵  Heatmap Coloration: 🌚 Suppressed volume —  congestion, coiling phases 🩱 Stable flow —  early trend or resting volume 🏀 High activity —  emerging pressure 💔 Extreme —  possible climax or institutional print 🎗️ A dynamic Fibonacci-based 21:34-period EMA ribbon overlays the histogram. The fill area inverts color on crossover, providing a real-time read on tempo, expansion, or divergence between price structure and crowd effort. 💡  LTF Usage Suggestions: • Confirm breakout legs when orange or red zones align with range exits • Fade overextended moves when red bars appear into resistance • Watch for rising EMAs and orange volume to front-run impulsive moves • Combine with volatility suppression (e.g. ATR) to catch compression → expansion transitions 🥂  Ideal Pairings: • OBVX Conviction Bias —  to confirm directional intent behind volume shifts • SUPeR TReND 2.718 —  for directional filters • ATR Turbulence Ribbon —  to detect compression phases 👥 The OBVX Conviction Bias adds a second dimension to ZVOL by revealing whether crowd effort is aligning with price direction or diverging beneath the surface. While ZVOL identifies statistical anomalies in raw volume, OBVX tracks directional commitment using cumulative volume and moving average cross logic. Use them together to spot fake-outs, anticipate structure-confirmed breakouts, or time pullbacks with volume-based conviction. 🔬 ZVOL isn’t just a volume filter — it’s a structural lens. It reveals when crowd effort is meaningful, when it's fading, and when something is about to shift. Designed for structure-aware traders who care about context, not noise.
Indikator Pine Script®
oleh TheLeadingIndicator
Breakouts With Timefilter Strategy [LuciTech]This strategy captures breakout opportunities using pivot high/low breakouts while managing risk through dynamic stop-loss placement and position sizing. It includes a time filter to limit trades to specific sessions. How It Works A long trade is triggered when price closes above a pivot high, and a short trade when price closes below a pivot low. Stop-loss can be set using ATR, prior candle high/low, or a fixed point value. Take-profit is based on a risk-reward multiplier. Position size adjusts based on the percentage of equity risked. Breakout signals are marked with triangles, and entry, stop-loss, and take-profit levels are plotted. moving average filter: Bullish breakouts only trigger above the MA, bearish breakouts below. The time filter shades the background during active trading hours. Customization: Adjustable pivot length for breakout sensitivity. Risk settings: percentage risked, risk-reward ratio, and stop-loss type. ATR settings: length, smoothing method (RMA, SMA, EMA, WMA). Moving average filter (SMA, EMA, WMA, VWMA, HMA) to confirm breakouts.
Strategi Pine Script®
oleh TradesLuci
Silver Bullet ICT Strategy [TradingFinder] 10-11 AM NY Time +FVG🔵 Introduction The ICT Silver Bullet trading strategy is a precise, time-based algorithmic approach that relies on Fair Value Gaps and Liquidity to identify high-probability trade setups. The strategy primarily focuses on the New York AM Session from 10:00 AM to 11:00 AM, leveraging heightened market activity within this critical window to capture short-term trading opportunities. As an intraday strategy, it is most effective on lower timeframes, with ICT recommending a 15-minute chart or lower. While experienced traders often utilize 1-minute to 5-minute charts, beginners may find the 1-minute timeframe more manageable for applying this strategy. This approach specifically targets quick trades, designed to take advantage of market movements within tight one-hour windows. By narrowing its focus, the Silver Bullet offers a streamlined and efficient method for traders to capitalize on liquidity shifts and price imbalances with precision. In the fast-paced world of forex trading, the ability to identify market manipulation and false price movements is crucial for traders aiming to stay ahead of the curve. The Silver Bullet Indicator simplifies this process by integrating ICT principles such as liquidity traps, Order Blocks, and Fair Value Gaps (FVG). These concepts form the foundation of a tool designed to mimic the strategies of institutional players, empowering traders to align their trades with the "smart money." By transforming complex market dynamics into actionable insights, the Silver Bullet Indicator provides a powerful framework for short-term trading success Silver Bullet Bullish Setup : Silver Bullet Bearish Setup : 🔵 How to Use The Silver Bullet Indicator is a specialized tool that operates within the critical time windows of 9:00-10:00 and 10:00-11:00 in the forex market. Its design incorporates key principles from ICT (Inner Circle Trader) methodology, focusing on concepts such as liquidity traps, CISD Levels, Order Blocks, and Fair Value Gaps (FVG) to provide precise and actionable trade setups. 🟣 Bullish Setup In a bullish setup, the indicator starts by marking the high and low of the session, serving as critical reference points for liquidity. A typical sequence involves a liquidity grab below the low, where the price manipulates retail traders into selling positions by breaching a key support level. This movement is often orchestrated by smart money to accumulate buy orders. Following this liquidity grab, a market structure shift (MSS) occurs, signaled by the price breaking the CISD Level—a confirmation of bullish intent. The indicator then highlights an Order Block near the CISD Level, representing the zone where institutional buying is concentrated. Additionally, it identifies a Fair Value Gap, which acts as a high-probability area for price retracement and trade entry. Traders can confidently take long positions when the price revisits these zones, targeting the next significant liquidity pool or resistance level. Bullish Setup in CAPITALCOM:US100 : 🟣 Bearish Setup Conversely, in a bearish setup, the price manipulates liquidity by creating a false breakout above the high of the session. This move entices retail traders into long positions, allowing institutional players to enter sell orders. Once the price reverses direction and breaches the CISD Level to the downside, a change of character (CHOCH) becomes evident, confirming a bearish market structure. The indicator highlights an Order Block near this level, indicating the origin of the institutional sell orders, along with an associated FVG, which represents an imbalance zone likely to be revisited before the price continues downward. By entering short positions when the price retraces to these levels, traders align their strategies with the anticipated continuation of bearish momentum, targeting nearby liquidity voids or support zones. Bearish Setup in OANDA:XAUUSD : 🔵 Settings Refine Order Block : Enables finer adjustments to Order Block levels for more accurate price responses. Mitigation Level OB : Allows users to set specific reaction points within an Order Block, including: Proximal: Closest level to the current price. 50% OB: Midpoint of the Order Block. Distal: Farthest level from the current price. FVG Filter : The Judas Swing indicator includes a filter for Fair Value Gap (FVG), allowing different filtering based on FVG width: FVG Filter Type: Can be set to "Very Aggressive," "Aggressive," "Defensive," or "Very Defensive." Higher defensiveness narrows the FVG width, focusing on narrower gaps. Mitigation Level FVG : Like the Order Block, you can set price reaction levels for FVG with options such as Proximal, 50% OB, and Distal. CISD : The Bar Back Check option enables traders to specify the number of past candles checked for identifying the CISD Level, enhancing CISD Level accuracy on the chart. 🔵 Conclusion The Silver Bullet Indicator is a cutting-edge tool designed specifically for forex traders who aim to leverage market dynamics during critical liquidity windows. By focusing on the highly active 9:00-10:00 and 10:00-11:00 timeframes, the indicator simplifies complex market concepts such as liquidity traps, Order Blocks, Fair Value Gaps (FVG), and CISD Levels, transforming them into actionable insights. What sets the Silver Bullet Indicator apart is its precision in detecting false breakouts and market structure shifts (MSS), enabling traders to align their strategies with institutional activity. The visual clarity of its signals, including color-coded zones and directional arrows, ensures that both novice and experienced traders can easily interpret and apply its findings in real-time. By integrating ICT principles, the indicator empowers traders to identify high-probability entry and exit points, minimize risk, and optimize trade execution. Whether you are capturing short-term price movements or navigating complex market conditions, the Silver Bullet Indicator offers a robust framework to enhance your trading performance. Ultimately, this tool is more than just an indicator; it is a strategic ally for traders who seek to decode the movements of smart money and capitalize on institutional strategies. With the Silver Bullet Indicator, traders can approach the market with greater confidence, precision, and profitability.
Indikator Pine Script®
oleh TFlab
13
Fibonacci-Only StrategyFibonacci-Only Strategy This script is a custom trading strategy designed for traders who leverage Fibonacci retracement levels to identify potential trade entries and exits. The strategy is versatile, allowing users to trade across multiple timeframes, with built-in options for dynamic stop loss, trailing stops, and take profit levels. Key Features: Custom Fibonacci Levels: This strategy calculates three specific Fibonacci retracement levels: 19%, 82.56%, and the reverse 19% level. These levels are used to identify potential areas of support and resistance where price reversals or breaks might occur. The Fibonacci levels are calculated based on the highest and lowest prices within a 100-bar period, making them dynamic and responsive to recent market conditions. Dynamic Entry Conditions: Touch Entry: The script enters long or short positions when the price touches specific Fibonacci levels and confirms the move with a bullish (for long) or bearish (for short) candle. Break Entry (Optional): If the "Use Break Strategy" option is enabled, the script can also enter positions when the price breaks through Fibonacci levels, providing more aggressive entry opportunities. Stop Loss Management: The script offers flexible stop loss settings. Users can choose between a fixed percentage stop loss or an ATR-based stop loss, which adjusts based on market volatility. The ATR (Average True Range) stop loss is multiplied by a user-defined factor, allowing for tailored risk management based on market conditions. Trailing Stop Mechanism: The script includes an optional trailing stop feature, which adjusts the stop loss level as the market moves in favor of the trade. This helps lock in profits while allowing the trade to run if the trend continues. The trailing stop is calculated as a percentage of the difference between the entry price and the current market price. Multiple Take Profit Levels: The strategy calculates seven take profit levels, each at incremental percentages above (for long trades) or below (for short trades) the entry price. This allows for gradual profit-taking as the market moves in the trade's favor. Each take profit level can be customized in terms of the percentage of the position to be closed, providing precise control over exit strategies. Strategy Backtesting and Results: Realistic Backtesting: The script has been backtested with realistic account sizes, commission rates, and slippage settings to ensure that the results are applicable to actual trading scenarios. The backtesting covers various timeframes and markets to ensure the strategy's robustness across different trading environments. Default Settings: The script is published with default settings that have been optimized for general use. These settings include a 15-minute timeframe, a 1.0% stop loss, a 2.0 ATR multiplier for stop loss, and a 1.5% trailing stop. Users can adjust these settings to better fit their specific trading style or the market they are trading. How It Works: Long Entry Conditions: The strategy enters a long position when the price touches the 19% Fibonacci level (from high to low) or the reverse 19% level (from low to high) and confirms the move with a bullish candle. If the "Use Break Strategy" option is enabled, the script will also enter a long position when the price breaks below the 19% Fibonacci level and then moves back up, confirming the break with a bullish candle. Short Entry Conditions: The strategy enters a short position when the price touches the 82.56% Fibonacci level and confirms the move with a bearish candle. If the "Use Break Strategy" option is enabled, the script will also enter a short position when the price breaks above the 82.56% Fibonacci level and then moves back down, confirming the break with a bearish candle. Stop Loss and Take Profit Logic: The stop loss for each trade is calculated based on the selected method (fixed percentage or ATR-based). The strategy then manages the trade by either trailing the stop or taking profit at predefined levels. The take profit levels are set at increments of 0.5% above or below the entry price, depending on whether the position is long or short. The script gradually exits the trade as these levels are hit, securing profits while minimizing risk. Usage: For Fibonacci Traders: This script is ideal for traders who rely on Fibonacci retracement levels to find potential trade entries and exits. The script automates the process, allowing traders to focus on market analysis and decision-making. For Trend and Swing Traders: The strategy's flexibility in handling both touch and break entries makes it suitable for trend-following and swing trading strategies. The multiple take profit levels allow traders to capture profits in trending markets while managing risk. Important Notes: Originality: This script uniquely combines Fibonacci retracement levels with dynamic stop loss management and multiple take profit levels. It is not just a combination of existing indicators but a thoughtful integration designed to enhance trading performance. Disclaimer: Trading involves risk, and it is crucial to test this script in a demo account or through backtesting before applying it to live trading. Users should ensure that the settings align with their individual risk tolerance and trading strategy.
Strategi Pine Script®
oleh Kinji213
3
RSI Box Strategy (pseudo- Grid Bot)This is a strategy intended primarily for algorithmic traders. It's a pseudo-grid bot that uses a dynamic, volume-weighted grid that only updates when the RSI meets certain conditions. It's also a breakout strategy, whereas normal grid bots are not (typical grid bots sell when a higher grid is reached, whereas this strategy sells when a lower grid is breached under specific conditions). This strategy also sells 100% of pyramiding orders on close. In a nutshell, the strategy updates its grid to the volume-weighted highest/lowest values of your given source ("src" in the settings) each time that there is a RSI crossunder/crossover. From this range it produces an evenly-spaced grid of five lines, and uses the current source to determine which grid line is closest to the source. Then, if the source crosses over the line directly above the current line, it enters a buy order. If the source crosses under the line directly below the current line, it enters a sell order. You can configure shorts, source, RSI length, and overbought/oversold levels in the settings. For the strategy results below: fees are at 0.1% per trade, with order size 1% of equity and a max pyramiding value of 33. For a greater R/R profile, you can increase the order size, which will increase drawdown but potentially yield better results.
Strategi Pine Script®
oleh wbburgin
Bollinger Bands - Breakout StrategyThe Bollinger Bands - Breakout Strategy is a trend-following optimized for short-term trading in the crypto market. This strategy employs the Bollinger Bands, a widely recognized technical indicator, as its primary instrument for pinpointing potential trades. It is capable of executing both long and short positions, depending on whether the market is in a spot or futures, and is particularly effective in trending markets. The strategy boasts a high degree of configurability, allowing users to set the Bollinger Bands period and deviation, trend filter, volatility filter, trade direction filter, rate of change filter, and date filter. Furthermore, it offers options for Take Profit, Stop Loss, and Trailing Stop for both long and short positions, ensuring a comprehensive risk management approach. The inclusion of a maximum intraday loss feature adds another layer of protection, making this strategy a valuable tool for traders seeking a professional and adaptable trading system. Name : Bollinger Bands - Breakout Strategy Category : Trend Follower based on Bollinger Bands Operating mode : Long and Short on Futures or Long on Spot Trade duration : Intraday Timeframe : 2H, 3H, 4H, 5H Market : Crypto Suggested usage : Trending Markets Entry : When the price crosses above or below the Bollinger Bands Exit : Opposite Cross or Profit target, Trailing stop or Stop loss Configuration : - Bollinger Bands period and deviation - Trend Filter - Volatility Filter - Trade direction filter - Rate of Change filter - Date Filter (for backtesting purposes) - Take Profit, Stop Loss and Trailing Stop for long and short positions - Risk Management: Max Intraday Loss Backtesting : ⁃ Exchange: BINANCE ⁃ Pair: BTCUSDT.P ⁃ Timeframe: 4H ⁃ Fee: 0.025% ⁃ Slippage: 1 - Initial Capital: 10000 USDT - Position sizing: 10% of Equity - Start : 2019-09-19 (Out Of Sample from 2022-12-23) - Bar magnifier: on Credits : - LucF of Pine Coders for f_security function to avoid repainting using security. - QuantNomad for Monthly Table. Disclaimer : Risk Management is crucial, so adjust stop loss to your comfort level. A tight stop loss can help minimise potential losses. Use at your own risk. How you or we can improve? Source code is open so share your ideas! Leave a comment and smash the boost button! Thanks for your attention, happy to support the TradingView community.
Strategi Pine Script®
oleh TheSocialCryptoClub
7
[-_-] Level Breakout, Auto Backtesting StrategyDescription: A Long only strategy based on breakout from a certain level formed by High price. It has auto-backtesting capabilities (you set ranges for the three main parameters: Lookback, TP and SL; the strategy then goes through different combinations of those parameters and displays a table with results that you can sort by Percentage of profitable trades AND/OR Net profit AND/OR Number of trades). So you can, for example, sort only by Net profit to find combination of parameters that gives highest net profit, or sort by Net profit and Percentage profitable to find a combination of parameters that gives the best balance between profitability and profit. The auto-backtesting also takes into account the commission which is set in % in the inputs (make sure to set the same value in properties of the strategy so that auto-backtesting and real backtesting results match). NOTE: auto-backtesting only find the best combinations and displays them in a table, you will then need to manually set the Lookback, TP and SL inputs for real backtesting to match. Parameters: - Lookback -> # of bars for filtering signals; recommended range from 2 to 5 - TP (%) -> take profit; recommended range from 5 to 10 - SL (%) -> stop loss; recommended range from 1 to 5 - Commission (%) -> commission per trade - Min/Max Lookback -> lookback range for auto-backtesting - Min/Max TP -> take profit range for auto-backtesting - Min/Max SL -> stop loss range for auto-backtesting - Percentage profitable -> sort by percentage of profitable trades - Net profit -> sort by net profit - Number of trades -> sort by number of trades
Strategi Pine Script®
oleh sabricat
5
Inside Bar SetupScript Details - This script plots Inside Bar for given day in selected time-frame (applicable only for Timeframes < Day) - Basis plotted inside bar, relevant targets are marked on the chart - Targets can be customised from script settings. Example, if range of mother candle is 10 points, then T1 is 10 * x above/below mother candle and T2 is 10 * y above/below mother candle. This x & y are configured via script settings How to use this script ? - This script works well on 10-15 mins timeframe for stocks, 15/30 mins timeframe for nifty index and 30/60 mins time frame for bank nifty index - If mother candle high is broken, take long trade with SL of mother candle low and if low is broken, take short trade with SL of mother candle high Remember: 1. Above logic is to be combined with support/resistances i.e. price action. This script is an add-on to price action analysis giving you more conviction. 2. If range of mother candle is very high, it is recommended to avoid the trade. 3. Basis inside bar formed on higher time frame, take trade on basis of lower time frame i.e if inside bar is formed on 60 mins, take trade on the basis of 10-15 mins time frame Example: 1. As seen in the chart, Nifty is near it's resistance and we are seeing Inside Bar being formed, In such scenario, even if High of Mother Candle is broken, we should be more interested to short as we are near resistance and probability of getting our targets in long side is less. 2. So, if I see breakdown of mother candle i.e. price going below low of mother candle, we will short with SL of high of mother candle. 3. As seen in the chart, both the targets are achieved. Additional Info: 1. Targets on Long/Short Side can be configured via settings. For indices 1 times/1.5 times the range works well. 2. This script plots targets basis the first inside bar formed in the day for selected time frame. 3. Inside bars formed through out the day are coloured separately but lines are plotted only on the basis of 1st formed inside bar as this strategy works well for the first formed inside bar) 4. Don't forget to check volume in case of breakout/breakdown. Note: 1. Mother Candle - First Candle of Inside Bar 2. Child Candle - Candle formed inside Mother Candle (Second Candle of Inside Bar) Happy Trading :)
Indikator Pine Script®
oleh dixitsoham7
44
Volatility Breakout StrategyThis is a strategy used by Larry R. Williams called Volatility Breakout. By identifying a strong uptrend that exceeds 'a certain level' on a daily basis as a breakout signal, enter long position, take advantage of long at the the next day's open. 'a certain level (Entry Price)' is calculated by { close + 'k' * high -low }, and applied logarithmic calculation. Stop loss level is calculated by half of the previous day's Low and Entry Price. Strategy exit always at UTC+0. And expressed day session with the background color. Thanks and hope this helps you. (kor) 이건 Larry R. Williams가 사용하는 변동성 돌파 전략입니다. 특정 수준을 넘는 강한 상승세를 돌파 신호로 파악하여 매수하고, 장시간이 종료될때에 빠르게 수익을 실현하는 전략입니다. "특정 레벨(진입가)"은 close + 'k' * high -low 로 계산되며 로그 계산을 적용했습니다. 손절 레벨은 전일 저가 및 진입 가격의 절반으로 계산됩니다. 전략은 항상 UTC+0에서 종료합니다. ( 한국 기준 오전 9시 ) 그리고 배경색으로 일일세션을 표현했습니다. 트뷰에 오픈소스의 래리윌리엄스 변동성전략이 없는것 같아 간단하게나마 만들어 보았습니다. 도움이 되었으면 좋겟워요..
Strategi Pine Script®
oleh Dicargo_Beam
29
72s Strat: Backtesting Adaptive HMA+ pt.1This is a follow up to my previous publication of Adaptive HMA+ few months ago, as a mean to provide some kind of initial backtesting tools. Which can be use to explore many possible strategies, optimise its settings to better conform user's pair/tf, and hopefully able to help tweaking your general strategy. If you haven't read the study or use the indicator, kindly go here first to get the overall idea. The first strategy introduce in this backtest is one most basic already described in the study; buy/sell is when movement is there and everything is on the right side; When RSI has turned to other side, we can use it as exit point (if in profit of course, else just let it hit our TP/SL, why would we exit before profit). Also, base on RSI when we make entry, we can further differentiate type of signals. --Please check all comments in code directly where the signals , entries , and exits section are. Second additional strategy to check; is when we also use second faster Adaptive HMA+ for exit. So this is like a double orders on a signal but with different exit-rule (/more on this on snapshots below). Alternatively, you can also work the code so to only use this type of exit. There's also an additional feature which you can enable its visuals, the Distance Zone , is to help measuring price distance to our xHMA+. It's just a simple atr based envelope really, I already put the sample code in study's comment section, but better gonna update it there directly for non-coder too, after this. In this sample I use Lot for order quantity size just because that's what I use on my broker. Also what few friends use while we forward-testing it since the study is published, so we also checked/compared each profit/loss report by real number. To use default or other unit of measurement, change the entry code accordingly. If you change your order size, you should also change the commission in Properties Tab. My broker commission is 5 USD per order/lot, so in there with example order size 0.1 lot I put commission 0.5$ per order (I'll put 2.5$ for 0.5 lot, 10$ for 2 lot, and so on). Crypto usually has higher charge. --It is important that you should fill it base on your broker. SETTINGS I'm trying to keep it short. Please explore it further again. (Beginner should also first get acquaintance with terms use here.) ORDERS: Base Minimum Profit Before Exit: The number is multiplier of ongoing ATR. Means that when basic exit condition is met, algo will check whether you're already in minimum profit or not, if not, let it still run to TP or SL, or until it meets subsequent exit condition, then it will check again. Default Target Profit: Multiplier of ATR at signal. If reached before any eligible exit condition is met, exit TP. Base StopLoss Point: You can change directly in code to use other like ATR Trailing SL, fix percent SL, or whatever. In the sample, 4 options provided. Maximum StopLoss: This is like a safety-net, that if at some point your chosen SL point from input above happens to be exceeding this maximum input that you can tolerate, then this max point is the one will be use as SL. Activate 2nd order...: The additional doubling of certain buy/sell with different exits as described above. If enable, you should also set pyramiding to at least: 2. If not, it does nothing. ADAPTIVE HMA+ PERIOD Many users already have their own settings for these. So in here I only sample the default as first presented in the study. Make it to your adaptive. MARKET MOVEMENT (1) Now you can check in realtime how much slope degree is best to define your specific pair/tf is out of congestion (yellow) area. And (2) also able to check directly what ATR lengths are more suitable defining your pair's volatility. DISTANCE ZONE Distance Multiplier. Each pair/tf has its own best distance zone (in xHMA+ perspective). The zone also determine whether a signal should appear or not. (Or what type of signal, if you wanna go more detail in constructing your strategy) USAGE (Provided you already have your own comfortable settings for minimum-maximum period of Adaptive HMA+. Best if you already have backtested it manually too and/or apply as an add-on to your working strategy) 1. In our experiences, first most important to define is both elements in the Market Movement Settings . These also tend to be persistent for whole season since it's kinda describing that pair/tf overall behaviour. Don't worry if you still get a low Profit Factor here, but by tweaking you should start to see positive changes in one of Max Drawdown and Net Profit, or Percent Profitable. 2. Afterwards, find your pair/tf Distance Zone . When optimising this, what we seek is just a "not to bad" equity curves to start forming. At least Max Drawdown should lessen more. Doesn't have to be great already, but should be better, no red in Net Profit. 3. Then go manage the "Trailing Minimum Profit", TP, SL, and max SL. 4. Repeat 1,2,3. 👻 5. Manage order size, commission, and/or enable double-order (need pyramiding) if you like. Check if your equity can handle max drawdown before margin call. 6. After getting an acceptable backtest result, go to List of Trades tab and find the biggest loss or when many sequencing loss in a row happened. Click on it to go to exact point on chart, observe why the signal failed and get at least general idea how it can be prevented . The rest is yours, you should know your pair/tf more than other. You can also re-explore your minimum-maximum period for both Major and minor xHMA+. Keep in mind that all numbers in Setting are conceptually in a form of range . You don't want to get superb equity curves but actually a "fragile" , means one can easily turn it to disaster just by changing only a fraction in one/two of the setting. --- If you just wanna test the strength of the indicator alone, you can disable "Use StopLoss" temporarily while optimising settings. Using no SL might be tempting in overall result data in some cases, but NOTE: It is not recommended to not using SL, don't forget that we deliberately enter when it's in high volatility. If want to add flexibility or trading for long-term, just maximise your SL. ie.: chose SL Point>ATR only and set it maximum. (Check your max drawdown after this). I think this is quite important specially for beginners, so here's an example; Hypothetically in below scenario, because of some settings, the buy order after the loss sell signal didn't appear. Let's say if our initial capital only 1000$ using leverage and order size 0,5 lot (risky position sizing already), moreover if this happens at the beginning of your trading season, that's half of account gone already in one trade . Your max SL should've made you exit after that pumping bar. The Trailing Minimum Profit is actually look like this. Search in the code if you want to plot it. I just don't like too many lines on chart. To maximise profit we can try enabling double-order. The only added rule coded is: RSI should rising when buy and falling when sell. 2nd signal will appears above or below default buy/sell signal. (Of course it's also prone to double-loss, re-check your max drawdown after. Profit factor play its part in here for a long run). Snapshot in comparison: Two default sell signals on left closed at RSI exit, the additional sell signal closed later on when price crossover minor xHMA+. On buy side, price haven't met our minimum profit when first crossunder minor xHMA+. If later on we hit SL on this "+buy" signal, at least we already profited from default buy signal. You can also consider/treat this as multiple TP points. For longer-term trading, what you need to maximise is the Minimum Profit , so it won't exit whenever an exit condition happened, it can happen several times before reaching minimum profit. Hopefully this snapshot can explain: Notice in comparison default sell and buy signal now close in average after 3 days. What's best is when we also have confirmation from higher TF. It's like targeting higher TF by entering from smaller TF. As also mention in the study, we can still experiment via original HMA by putting same value for minimum-maximum period setting. This is experimental EU 1H with Major xHMA+: 144-144, Flat market 13, Distance multiplier 3.6, with 2nd order activated. Kiwi was a bit surprising for me. It's flat market is effectively below 6, with quite far distance zone of 3.5. Probably because I'm using big numbers in adaptive period. --- The result you see in strategy tester report below for EURUSD 15m is using just default settings you see in code, as follow: 0,1 lot for each order (which is the smallest allowed by my broker). No pyramiding. Commission: 0.5 usd per order. Slippage: 3 Opening position is only using basic strategy #1 (RSI exit). Additional exit not activated. Minimum Profit: 1. TP: 3. SL use: Half-distance zone. Max SL: 4.5. Major xHMA+: 172-233. minor xHMA+: 89-121 Distance Zone Multiplier: 2.7 RSI: Standard 14. (From our forward-testing, the difference we get from net profit is because of the spread, our entry isn't exactly at the close/open price. Not so much though, but not the same. If somebody can direct me to any example where we can code our entry via current bid/ask price, that would be awesome!) It's already a long post (sorry), think I'm gonna pause here. Check out the code :) --- DISCLAIMER: Past performance is no guarantee of future results , and so on.. you know the drill ;) Please read whole description first before using, don't take 1-2 paragraph and claim it's the whole logic, you are responsible of your own actions and understanding.
Strategi Pine Script®
oleh io72signals
58
Fractal Breakout StrategyFractal A type of pattern used in technical analysis to predict a reversal in the current trend. A fractal pattern consists of five bars and is identified when the price meets the following characteristics: 1. A shift from a downtrend to an uptrend occurs when the lowest bar is located in the middle of the pattern and two bars with successively higher lows are positioned around it. 2. A shift from an uptrend to a downtrend occurs when the highest bar is located in the middle of the pattern and two bars with successively lower highs are positioned around it.
Strategi Pine Script®
oleh ceyhun
13
Fractal Breakout Strategy (by ChartArt)This long only strategy determines the price of the last fractal top and enters a trade when the price breaks above the last fractal top. The strategy also calculates the average price of the last fractal tops to get the trend direction. The strategy exits the long trade, when the average of the fractal tops is falling (when the trend is lower highs as measured by fractals). And the user can manually set a time delay of this exit condition. The default setting is a long strategy exit always 3 bars after the long entry condition appeared. In addition as gimmicks the fractals tops can be highlighted (the default is blue) and a line can be drawn based on the fractal tops.This fractal top line is colored by the fractal top average trend in combination with the fractal breakout condition. This strategy works better on higher time-frames (weekly and monthly), but it also works on the daily and some other time-frames. This strategy does not repaint, no repainting. P.S. I thank Tradingview user barracuda who helped me with the time based exit condition code. And user RicardoSantos for coding the definition of the fractal top, which he uses in his " Fractals" scripts. All trading involves high risk; past performance is not necessarily indicative of future results. Hypothetical or simulated performance results have certain inherent limitations. Unlike an actual performance record, simulated results do not represent actual trading. Also, since the trades have not actually been executed, the results may have under- or over-compensated for the impact, if any, of certain market factors, such as lack of liquidity. Simulated trading programs in general are also subject to the fact that they are designed with the benefit of hindsight. No representation is being made that any account will or is likely to achieve profits or losses similar to those shown.
Strategi Pine Script®
oleh ChartArt
16
CamarillaStrategy -V1 - H4 and L4 breakout - exits addedExits added using trailing stops. 2.6 Profit Factor and 76% Profitable on SPY , 5M - I think it's a pretty good number for an automated strategy that uses Pivots. I don't think it's possible to add volume and day open price in relation to pivot levels -- that's what I do manually .. Still trying to add EMA for exits.. it will increase profitability. You can play in pinescript with trailing stops entries..
Strategi Pine Script®
oleh cristian.d
15