Mulai

Rata-Rata Rentang Sebenarnya / Average True Range (ATR)

ATR R-LevelsATR-R Levels is built for clarity of risk management. The script takes your account size, chosen risk %, and the market’s volatility, then turns all of that into exact stop-loss, take-profit, and position size so there’s no guessing. It’s inspired by key principles from NNFX, especially ATR-based stop placement and fixed-risk position sizing, but redesigned for fast intraday crypto trading. You get the same consistency and discipline NNFX is known for, adapted to a much shorter timeframe. ATR-R Levels gives you: A volatility-based stop using ATR A clean 2R (or custom R-multiple) target Automatic position sizing based on your risk rules A simple HUD showing ATR, entry, stop, TP, size, and risk Optional net profit estimates after fees Let me know what you think or if you use it!
Indikator Pine Script®
oleh schmypto
Trinity ATR Real Move DetectorTrinity ATR Real Move Detector This ATR Energy Table indicator is one of the simplest yet most powerful filters you can have on a chart when trading short-dated or 0DTE options or swing trades on any timeframe from 1-minute up to 4-hour. Its entire job is to answer the single most important question in intraday and swing trading: “Does the underlying actually have enough short-term explosive energy right now to make a directional position worth the theta and the spread, or is this just pretty candles that will die in ten minutes?” Most losing 0DTE and short-dated option trades happen because people buy or sell direction on a “nice-looking” breakout or pullback while the underlying is actually in low-energy grind mode. The premium decays faster than the move develops, and you lose even when you’re “right” on direction. This little table stops that from ever happening again. Here’s what it does in plain English: Every bar it measures two things: - The current ATR on whatever timeframe you are using (1 min, 3 min, 5 min, 10 min, etc.). This tells you how big the average true range of the last 14 bars has been — in other words, how violently the stock or index is actually moving right now. - The daily ATR (14-period on the daily chart). This is your benchmark for “normal” daily movement over the last two–three weeks. It then multiplies the daily ATR by a small number (the multiplier you set) and compares the two. If the short-term ATR is bigger than that percentage of the daily ATR, the table turns bright green and says “ENOUGH ENERGY”. If not, it stays red and says “NOT ENOUGH”. Why this works so well: - Real explosive moves that carry for 0DTE and 1–3 DTE options almost always show a short-term ATR spike well above the recent daily average. Quiet grind moves never do. - The comparison is completely adaptive — on a high-vol day the threshold automatically rises, on a low-vol day it automatically drops. You never have to guess if “2 points on SPY is big today”. - It removes emotion completely. You simply wait for green before you even think about clicking buy or sell on an option. Key settings and what to do with them: - Energy Multiplier — this is the only number you ever touch. It is expressed as a decimal (0.15 = 15 % of the daily ATR). Lower = more signals, higher = stricter and higher win rate. The tooltip gives you the exact sweet-spot numbers for every popular timeframe (0.09 for 1-minute scalping, 0.13 for 3-minute, 0.14–0.16 for 5-minute, 0.15–0.19 for 10-minute, etc.). Just pick your timeframe once and type the number — done forever. - ATR Length — leave it at 14. That’s the standard and works perfectly. - Table Position — move the table to wherever you want on the chart (top-right, bottom-right, bottom-left, top-left). - Table Size — make the text Tiny, Small, Normal or Large depending on how much screen space you have. How this helps you make money and stop losing it: - On most days you will see red 80–90 % of the time — that’s good! It is forcing you to sit on your hands instead of overtrading low-energy chop that eats premium. - When it finally flips green you know institutions are actually pushing size right now — follow-through probability jumps from ~40 % to 65–75 % depending on the stock and timeframe. - You stop buying calls on every green candle and puts on every red candle. You only strike when the market is genuinely “awake”. - Over a week you take dramatically fewer trades, but your win rate and average winner size go way up — which is exactly how consistent intraday option profits are made. In short, this tiny table is the closest thing to an “edge on/off switch” that exists for short-dated options. Red = preserve capital and go do something else. Green = pull the trigger with confidence. Use it religiously and you’ll immediately feel the difference in your P&L.
Indikator Pine Script®
oleh EMA34TRADER
22
ADR% / ATR / Dynamic LoD–HoD TableThis indicator displays a clean data table showing ADR%, ATR, and a dynamic LoD/HoD distance value based on daily trend conditions. When price is above the 21-day or 50-day moving average, the indicator shows the distance from the Low of Day. When price is below BOTH daily moving averages, it automatically switches to showing distance from the High of Day. The table updates in real-time and gives a fast, volatility-based view of where price sits inside the day’s range. Features • ADR% (Average Daily Range Percentage) • ATR (Average True Range) • Automatic LoD → HoD switching based on daily trend • Customizable colors and layout • Clean, space-efficient table format • Designed for intraday and volatility-focused traders
Indikator Pine Script®
oleh InsiderTradingCuh
Adaptive Risk Management [sgbpulse]1. Introduction: Adaptive Risk Management is an advanced indicator designed to provide traders with a comprehensive risk management tool directly on the chart. Instead of relying on complex manual calculations, the indicator automates all critical steps of trade planning. It dynamically calculates the estimated Entry Price , the Stop Loss location, the required Position Size (Quantity) based on your capital and risk limits, and the three Take Profit targets based on your defined Reward/Risk ratios. The indicator displays all these essential data points clearly and visually on the chart, ensuring you always know the potential risk-reward profile of every trade. ARM : The A daptive R isk M anagement every trader needs to ARM themselves with. 2. The Critical Importance of Risk Management Proper risk management is the cornerstone of successful trading. Consistent profitability in the market is impossible without rigorously defining risk limits. Risk Control: This starts by setting the maximum risk amount you are willing to lose in a single trade (Risk per Trade), and limiting the total capital allocated to the position (Max Capital per Trade). Defining Boundaries (Stop Loss & Take Profit): It is mandatory to define a technical Stop Loss and a Take Profit target. A fundamental rule of risk management is that the Reward/Risk Ratio (R/R) must be a minimum of 1:1. 3. Core Features, Adaptivity, and Customization The Adaptive Risk Management indicator is engineered for use across all major trading styles, including Swing Trading, Intraday Trading, and Scalping, providing consistent risk control regardless of the chosen timeframe. Real-Time Dynamic Adaptivity: The indicator calculates all risk management parameters (Entry, Stop Loss, Quantity) dynamically with every new bar, thus adapting instantly to changing market conditions. Trend Direction Adjustment: Define the analysis direction (Long/Uptrend or Short/Downtrend). Intraday Session Data Control: Full control over whether lookback calculations will include data from Extended Trading Hours (ETH), or if the daily calculations will start actively only from the first bar of Regular Trading Hours (RTH). Status Validation: The indicator performs critical status checks and displays clear Warning Messages if risk conditions are not met. 4. Intuitive Visualization and Real-Time Data Dynamic Tracking Lines: The Entry Price and Stop Loss lines are updated with every new bar. Crucially, the length of these lines dynamically reflects the calculation's lookback range (e.g., the extent of Lookback Bars or the location of the confirmed Pivot Point), providing a visual anchor for the calculated price. Risk and Reward Zones: The indicator creates a graphical background fill between Entry and Stop Loss (marked with the risk color) and between Entry and the Reward Targets (marked with the reward color). Essential Information Labels: Labels are placed at the end of each line, providing critical data: Estimated Entry Price, Stock/Contract Quantity (Quantity), Total Entry Amount, Estimated Stop Loss, Risk per Share, Total Financial Risk (Risk Amount), Exit Amount, Estimated Take Profit 1/2/3, Reward/Risk Ratio 1/2/3, Total Reward 1/2/3, TP Exit Amount 1/2/3. 4.1. Data Window Metrics (16 Full Series) The indicator displays 16 full data series in the TradingView Data Window, allowing precise tracking of every calculation parameter: Entry Data: Estimated Entry, Quantity, Entry Amount. Risk Data (Stop Loss): Estimated Stop Loss, Risk per Share, Risk Amount, Exit Amount. Reward Data (Take Profit): Estimated Take Profit 1/2/3, Reward/Risk Ratio 1/2/3, Total Reward 1/2/3, TP Exit Amount 1/2/3. 4.2. Instant Tracking in the Status Line The indicator displays 6 critical parameters continuously in the indicator's Status Line: Estimated Entry, Quantity, Estimated Stop Loss, Estimated Take Profit 1/2/3. 5. Detailed Indicator Inputs 5.1 General Focused Trend: Defines the analysis direction (Uptrend / Downtrend). Max Capital per Trade: The maximum amount allocated to purchasing stocks/contracts (in account currency). Risk per Trade: The maximum amount the user is willing to risk in this single trade (in account currency). ATR Length: The lookback period for the Average True Range (ATR) calculation. 5.2 Intraday Session Data Control Regular Hours Limitation : If enabled, all daily lookback calculations (for Entry/Stop Loss anchor points) will begin strictly from the first Regular Trading Hours (RTH) bar. This limits the lookback range to the current RTH session, excluding preceding Extended Trading Hours (ETH) data. Only relevant for Intraday charts. Default: False (Off) 5.3 Entry Inputs Entry Method: Selects the entry price calculation method: Current Price: Uses the closing price of the current bar as the estimated entry point (Market Entry). ATR Real Bodies Margin : - Uptrend: Calculates the Maximum Real Body over the lookback period + the calculated safety margin. - Downtrend: Calculates the Minimum Real Body over the lookback period - the calculated safety margin. ATR Bars Margin : - Uptrend: Calculates the Maximum High price over the lookback period + the calculated safety margin. - Downtrend: Calculates the Minimum Low price over the lookback period - the calculated safety margin. Lookback Bars: The number of bars used to calculate the extremes in the ATR-based entry methods (Relevant only for ATR Real Bodies Margin and ATR Bars Margin methods). ATR Multiplier (Entry): The multiplier applied to the ATR value. The result of the multiplication is the calculated safety margin used to determine the estimated Entry Price. 5.4 Risk Inputs (Stop Loss) Risk Method: Selects the Stop Loss price calculation method. ATR Current Price Margin : - Uptrend: Entry Price - the calculated safety margin. - Downtrend: Entry Price + the calculated safety margin. ATR Current Bar Margin : - Uptrend: Current Bar's Low price - the calculated safety margin. - Downtrend: Current Bar's High price + the calculated safety margin. ATR Bars Margin : - Uptrend: Lowest Low over lookback period - the calculated safety margin. - Downtrend: Highest High over lookback period + the calculated safety margin. ATR Pivot Margin : - Uptrend: The first confirmed Pivot Low point - the calculated safety margin. - Downtrend: The first confirmed Pivot High point + the calculated safety margin. Lookback Bars: The lookback period for finding the extreme price used in the 'ATR Bars Margin' calculation. ATR Multiplier (Risk): The multiplier applied to the ATR value. The result of the multiplication is the calculated safety margin used to place the estimated Stop Loss. Note: If set to 0, the Stop Loss will be placed exactly at the technical anchor point, provided the Minimum Margin Value is also 0. Minimum Margin Value: The minimum price value (e.g., $0.01) the Stop Loss margin buffer must be. Pivot (Left / Right): The number of bars required on either side of the pivot bar for confirmation (relevant only for the ATR Pivot Margin method). 5.5 Reward Inputs (Take Profit) Show Take Profit 1/2/3: ON/OFF switch to control the visibility of each Take Profit target. Reward/Risk Ratio 1/ 2/ 3: Defines the R/R ratio for the profit target. Must be ≥1.0. 6. Indicator Status/Warning Messages In situations where the Stop Loss location cannot be calculated logically and validly, often caused by a mismatch between the configured Focused Trend (Uptrend/Downtrend) and the actual price action, the indicator will display a warning message, explaining the reason and suggesting corrective action. Status Message 1: Pivot reference unavailable Condition: The Stop Loss is set to the "ATR Pivot Margin" method, but the anchor point (Pivot) is missing or inaccessible. Message Displayed: "Pivot reference unavailable. Wait for valid price action, or adjust the Regular Hours Limitation setting or Pivot Left/Right inputs." Status Message 2: Calculated Stop Loss is unsafe Condition: The calculated Stop Loss is placed illogically or unsafely relative to the trend direction and the Entry price. Message Displayed: "Calculated Stop Loss is unsafe for current trend. Wait for valid price action or adjust SL Lookback/Multiplier." 7. Summary The Adaptive Risk Management (ARM) indicator provides a seamless and systematic approach to trade execution and risk control. By dynamically automating all critical trade parameters—from Entry Price and Stop Loss placement to Position Sizing and Take Profit targets—ARM removes emotional bias and ensures every trade adheres strictly to your predefined risk profile. Key Benefits: Systematic Risk Control: Strict enforcement of maximum capital allocation and risk per trade limits. Adaptivity: Dynamic calculation of prices and quantities based on real-time market data (ATR and Lookback). Clarity and Trust: Clear on-chart visualization, precise data metrics (16 series), and unambiguous Status/Warning Messages ensure transparency and reliability. ARM allows traders to focus on strategy and analysis, confident that their execution complies with the core principles of professional risk management. Important Note: Trading Risk This indicator is intended for educational and informational purposes only and does not constitute investment advice or a recommendation for trading in any form whatsoever. Trading in financial markets involves significant risk of capital loss. It is important to remember that past performance is not indicative of future results. All trading decisions are your sole responsibility. Never trade with money you cannot afford to lose.
Indikator Pine Script®
oleh sgbpulse
Triple ATR Adaptive MAs + VWAP Option + Clouds + Candle Trend V2Another one of my experiences ... combining things... 📘 Indicator Description – Triple ATR Adaptive Moving Averages with VWAP Influence This indicator plots three adaptive moving averages whose behavior changes dynamically based on market volatility (ATR) and optionally VWAP deviation. Because they adapt in real time to both volatility and VWAP pressure, their movement, slope, and reaction speed differ significantly from traditional moving averages. 🔶 1. ATR-Adaptive Moving Averages Each of the three MAs uses a custom adaptive formula: ATR (Average True Range) is measured over a chosen period. Higher ATR → more volatility → the MA becomes more reactive and moves closer to price. Lower ATR → stable market → the MA becomes smoother and slower. This creates a volatility-aware smoothing factor, making the MA expand, contract, and respond to market conditions in ways a classic SMA, EMA, or HMA cannot. 🔷 2. Optional VWAP Influence Each MA has an independent toggle allowing it to be influenced by VWAP. When enabled: The MA is gently “pulled” toward VWAP. The strength of this attraction is determined by the VWAP Influence parameter (0–1). This causes the moving averages to behave differently from normal MAs: In trending markets, the ATR and price push the MA away from VWAP. In mean-reverting or balanced conditions, VWAP pulls the MA back toward fair value. The result is an MA that reflects both trend pressure and fair-value pressure. 🔶 3. Visual Behavior: Non-Traditional Movement Because each MA is simultaneously influenced by volatility, trend magnitude, and VWAP deviation, their shape is often very distinct from normal moving averages. They may: Respond faster during high volatility Flatten out earlier during consolidation Curve toward VWAP when price becomes extended Separate or compress depending on ATR strength This is intentional and essential, since the goal is to show: ✔ Volatility expansion ✔ Trend exhaustion ✔ Overextended price relative to VWAP ✔ Dynamic trend confirmation Rather than simply smoothing past price. 🔷 4. Three Independent Adaptive Lines Each of the three moving averages has: Its own ATR length Its own sensitivity multiplier Its own optional VWAP influence Its own color and trail This allows the user to combine: a fast volatility-adaptive trend line a mid-range adaptive baseline a slow adaptive long-trend MA All adapting independently to volatility and VWAP conditions. 🔶 5. Optional Candle Coloring The indicator can color candles according to trend strength derived from the fast/slow MAs. Stronger trends produce more vivid colors. Neutral or conflicting trends produce softer colors. This adds a visual layer to identify: Trend direction Trend strength Volatility state Market compression at a glance. 📌 Summary This indicator does not behave like standard SMAs or EMAs because each line dynamically adapts to: 🔸 ATR (volatility) 🔸 VWAP (fair value) This makes the indicator extremely responsive to market conditions while still reducing noise during stable phases. It provides a more realistic, context-aware, and intelligent representation of price behavior compared to traditional moving averages.
Indikator Pine Script®
oleh ueuito
Volatility-Dynamic Risk Manager MNQ [HERMAN]Title: Volatility-Dynamic Risk Manager MNQ Description: The Volatility-Dynamic Risk Manager is a dedicated risk management utility designed specifically for traders of Micro Nasdaq 100 Futures (MNQ). Many traders struggle with position sizing because they use a fixed Stop Loss size regardless of market conditions. A 10-point stop might be safe in a slow market but easily stopped out in a high-volatility environment. This indicator solves that problem by monitoring real-time volatility (using ATR) and automatically suggesting the appropriate Stop Loss size and Position Size (Contracts) to keep your dollar risk constant. Note: This tool is hardcoded for MNQ (Micro Nasdaq) with a tick value calculation of $2 per point. 📈 How It Works -This script operates on a logical flow that adapts to market behavior: -Volatility Measurement: It calculates the Average True Range (ATR) over a user-defined length (Default: 14) to gauge the current "speed" of the market. -State Detection: Based on the current ATR, the script classifies the market into one of three states: Low Volatility: The market is chopping or moving slowly. Normal Volatility: Standard trading conditions. High Volatility: The market is moving aggressively. Dynamic Stop Loss Selection: Depending on the detected state, the script selects a pre-defined Stop Loss (in points) that you have configured for that specific environment. Position Sizing Calculation: Finally, it calculates how many MNQ contracts you can trade so that if your Stop Loss is hit, you do not lose more than your defined "Max Risk per Trade." 🧮 Methodology & Calculations Since this script handles risk management, transparency in calculation is vital. Here is the exact math used: ATR Calculation: Contracts = Max Risk / Risk Per Contract ⚙️ Settings You can fully customize the behavior of the risk manager via the settings panel: Risk Management -Max Risk per Trade ($): The maximum amount of USD you are willing to lose on a single trade. Volatility Thresholds (ATR) -ATR Length: The lookback period for volatility calculation. -Upper Limit for LOW Volatility: If ATR is below this number, the market is "Low Volatility." -Lower Limit for HIGH Volatility: If ATR is above this number, the market is "High Volatility." (Anything between Low and High is considered "Normal"). Stop Loss Settings (Points) -SL for Low/Normal/High: Define how wide your stop loss should be in points for each of the three market states. Visual Settings -Color Theme: Switch between Light and Dark modes. -Panel Position: Move the dashboard to any corner or center of your chart. -Panel Size: Adjust the scale (Tiny to Large) to fit your screen resolution. 📊 Dashboard Overview -The on-screen panel provides a quick-glance summary for live execution: -Market State: Color-coded status (Green = Low Vol, Orange = Normal, Red = High Vol). -Current ATR: The live volatility reading. -Suggested SL: The Stop Loss size you should enter in your execution platform. -CONTRACTS: The calculated position size. -Est. Loss: The actual dollar amount you will lose if the stop is hit (usually slightly less than your Max Risk due to rounding down). Who is this for? -Discretionary and systematic futures traders on MNQ (/MNQ or MES also works with small adjustments) -Anyone who wants perfect risk consistency regardless of whether the market is asleep or exploding -Traders who hate manual position-size calculations on every trade No repainting Works on any timeframe Real-time updates on every bar Overlay indicator (no signals, pure risk-management tool) ⚠️ Disclaimer This tool is for informational and educational purposes only. It calculates mathematical position sizes based on user inputs. It does not execute trades, nor does it guarantee profits. Past performance (volatility) is not indicative of future results. Always manually verify your order size before executing trades on your broker platform.
Indikator Pine Script®
oleh helmans13
1
Combined: Net Volume, RSI & ATR# Combined: Net Volume, RSI & ATR Indicator ## Overview This custom TradingView indicator overlays **Net Volume** and **RSI (Relative Strength Index)** on the same chart panel, with RSI scaled to match the visual range of volume spikes. It also displays **ATR (Average True Range)** values in a table. ## Key Features ### Net Volume - Calculates buying vs selling pressure by analyzing lower timeframe data - Displays as a **yellow line** centered around zero - Automatically selects optimal timeframe or allows manual override - Shows net buying pressure (positive values) and selling pressure (negative values) ### RSI (Relative Strength Index) - Traditional 14-period RSI displayed as a **blue line** - **Overlays directly on the volume chart** - scaled to match volume spike heights - Includes **70/30 overbought/oversold levels** (shown as dotted red/green lines) - Adjustable scale factor to fine-tune visual sizing relative to volume - Optional **smoothing** with multiple moving average types (SMA, EMA, RMA, WMA, VWMA) - Optional **Bollinger Bands** around RSI smoothing line - **Divergence detection** - identifies regular bullish/bearish divergences with labels ### ATR (Average True Range) - Displays current ATR value in a **table at top-right corner** - Configurable period length (default: 50) - Multiple smoothing methods: RMA, SMA, EMA, or WMA - Helps assess current market volatility ## Use Cases - **Momentum & Volume Confirmation**: See if RSI trends align with net volume flows - **Divergence Trading**: Automatically spots when price makes new highs/lows but RSI doesn't - **Volatility Assessment**: Monitor ATR for position sizing and stop-loss placement - **Overbought/Oversold + Volume**: Identify exhaustion when RSI hits extremes with volume spikes ## Customization All components can be toggled on/off independently. RSI scale factor allows you to adjust how prominent the RSI line appears relative to volume bars.
Indikator Pine Script®
oleh jarodvaneijsden
QFT MTF Range DetectorQFT MTF Range Detector — QuantumFlowTrader Description: The QFT MTF Range Detector is a multi-timeframe (MTF) tool designed to identify consolidation zones or ranging conditions across multiple intraday timeframes — from 1 minute up to 4 hours. This indicator is optimized for high-frequency trading environments such as scalping and day trading. How it works: For each selected timeframe, the indicator evaluates five key technical conditions: - Low ADX (less than 17) – suggesting weak trend strength. - Range width within a specific normalized threshold. - Normalized ATR (volatility filter) in a defined range. - RSI near the neutral zone (40–60) with low volatility. - Price proximity to the mid-range (consolidation center). Each condition contributes a score. If at least 3 out of 5 conditions are met, that timeframe is considered to be in a range (consolidation). Visual output: A compact table is displayed on the chart showing all selected timeframes: Black box = Timeframe is in a range (consolidation). Purple box = Not in a range (likely trending or volatile). Timeframes are labeled (e.g., "4H", "15M") for clarity. Customization: Choose display corner (top/bottom, left/right). Enable or disable table borders. Set custom colors for range and non-range signals. Use case: Traders can quickly assess which timeframes are in a range, helping them: Avoid choppy markets, Time entries and exits better, Confirm multi-timeframe alignment. Note: This is not a buy/sell signal indicator. It is a market condition filter to enhance decision-making.
Indikator Pine Script®
oleh QuantumFTrader
Watermark | Bar Time | Average Daily RangeMulti Info Panel & Watermark Multi Info Panel & Watermark is a utility indicator that displays several pieces of chart information in a single, customizable panel. It is designed to support intraday and swing analysis by making key data—such as symbol details, date, and average daily range—easy to see at a glance, as well as providing simple tools for notes and backtesting. Features Watermark / Custom Note Optional text overlay that can be used as a watermark or personal note. Can display a strategy name, reminder, or any other user-defined label on the chart. Ticker Info Shows information about the currently active symbol on the chart (for example, symbol name and other basic details depending on the inputs). Helps keep track of which market or pair is being analyzed, especially when using multiple charts. Current Date Displays the current date directly on the chart. Useful for screenshots, journaling, and documenting analysis. Average Daily Range (ADR) Calculates the average daily range of the active symbol over a user-defined number of recent days. Helps visualize how much price typically moves in a day, which can support position sizing, target setting, or volatility awareness within your own trading approach. Open Bar Time Marker Marks the open time of a selected bar (for example, a session open or a specific reference bar). Primarily intended as a visual aid for manual backtesting and reviewing historical price action. Usage Use the watermark and ticker info to keep your charts labeled and organized. Refer to the ADR readout to understand typical daily volatility of the instrument you are studying. Use the date and open bar time marker when creating screenshots, trade journals, or when replaying historical sessions for review. This script does not generate trading signals and does not guarantee any performance or results. It is provided solely as an informational and visualization tool. Always combine it with your own analysis, risk management, and decision-making. Nothing in this indicator or description should be considered financial advice.
Indikator Pine Script®
oleh AtomicPips
PDH/PDL Sweep & Rejection - sudoPDH/PDL Sweep + Rejection This indicator identifies classic liquidity sweeps of the previous day's high or low, then confirms whether price rejected that level with force. It is built to highlight moments when the market takes liquidity and immediately snaps back in the opposite direction, a behavior often linked to failed breakouts, engineered stops, or clean reversals. The tool marks these events directly on the chart so you can see them without manually watching the daily levels. What it detects The indicator focuses on two events: PDH sweep and rejection Price breaks above the previous day's high, overshoots the level by a meaningful amount, and then closes back below the high. PDL sweep and rejection Price breaks below the previous day's low, overshoots, and then closes back above the low. These are structural liquidity events, not random wicks. The script checks for enough overshoot and strong bar range to confirm it was a genuine stop grab rather than noise. How it works The indicator evaluates each bar using the following logic: 1. Previous day levels It pulls yesterday's high and low directly from the daily timeframe. These act as the PDH and PDL reference points for intraday trading. 2. Overshoot measurement After breaking the level, price must push far enough beyond it to qualify as a sweep. Instead of using arbitrary pips, the required overshoot is scaled relative to ATR. This keeps the logic stable across different assets and volatility conditions. 3. Range confirmation The bar must be larger than normal compared to ATR. This ensures the sweep happened with momentum and not because of small, choppy price movement. 4. Rejection close A valid signal only prints if price closes back inside the previous day's range. For a PDH sweep, the bar must close below PDH. For a PDL sweep, the bar must close above PDL. This confirms a failed breakout and a rejection. What gets placed on the chart Red downward triangle above the bar: Previous Day High sweep and rejection Lime upward triangle below the bar: Previous Day Low sweep and rejection The markers appear exactly on the bar where the sweep and rejection occurred. How traders can use this Identify potential reversals Sweeps often occur when algorithms target liquidity pools. When followed by a strong rejection, the market may be preparing for a reversal or rotation. Avoid chasing breakouts A clear sweep warns that a breakout attempt failed. This can prevent traders from entering at the worst possible location. Time entries at extremes The markers help you see where the market grabbed stops and immediately turned. These areas can become high quality entry zones in both trend continuation and countertrend setups. Support liquidity based models The indicator aligns naturally with trading frameworks that consider liquidity, displacement, failed breaks, and microstructure shifts. Add confidence to confluence-based setups Combine sweeps with displacement, FVGs, or higher timeframe levels to refine entry timing. Why this indicator is helpful It automates a pattern that traders often identify manually. Sweeps are easy to miss in fast markets, and this tool eliminates the need to constantly monitor daily levels. By marking only the events that show overshoot plus rejection plus significant range, it filters out the weak or false signals and leaves only meaningful liquidity events.
Indikator Pine Script®
oleh hondacivic2002
Displacement Pulse Markers - sudoThis indicator is designed to highlight sudden and meaningful bursts of price movement. These bursts are called displacement pulses. A pulse appears when price expands with force, closes near the extreme of its own bar, and breaks through a recent structural level. The indicator places small circles above or below the candle to signal these moments so that traders can quickly spot abnormal movement and potential shifts in market intent. How it works The indicator evaluates each bar for three conditions: Range expansion relative to volatility The bar must be larger than normal. It compares the bar range to ATR and requires that range to exceed a multiple of ATR. When this condition is met, the bar is considered a large or forceful bar. Close location within the bar The bar has to close near its own high or low. A close near the top suggests strong buying force. A close near the bottom suggests strong selling force. The user can adjust what percentage qualifies as near the top or bottom. Break of recent structure The bar must break a recent pivot level. For bullish pulses, the high of the bar must exceed the highest high of the past N bars. For bearish pulses, the low must break the lowest low of the past N bars. This confirms that the move did not merely expand but actually displaced prior structure. When all conditions align A bullish displacement pulse is marked with a small aqua circle below the bar. A bearish displacement pulse is marked with a fuchsia circle above the bar. The result is a clean on chart visualization of where price produced meaningful displacement. How traders can use this Spot abnormal momentum Pulses can highlight areas where price behaves with more force than usual. These events often appear around news, liquidity sweeps, or algorithmic shifts. Identify possible regime changes A pulse that breaks structure while closing near the extreme may signal a transition from a ranging environment to a trending one. It does not predict direction but flags where displacement actually occurred. Support narrative building When combined with levels, zones, or other frameworks, pulses can confirm whether the market had enough strength to break through an area with conviction. Filter trades or refine entries Some traders may choose to trade in the direction of recent pulses during trending conditions. Others may only enter a trade after a pulse confirms that the market has shifted away from compression. Track where the market is imbalanced A pulse visually marks whether buyers or sellers were able to generate strong initiative movement. These points often become useful reference zones for continuation or rejection analysis. Why this indicator is useful It reduces complex logic into simple visual markers. Instead of scanning bar by bar for structural breaks, volatility expansions, and close strength, the indicator does this automatically and highlights only the bars that meet all criteria. This keeps the chart clean while still providing precision about where displacement actually occurred.
Indikator Pine Script®
oleh hondacivic2002
Hash SupertrendHash Supertrend is a visually enhanced Supertrend-based indicator designed by Hash Capital Research, tuned specifically for crypto trend trading on Solana (SOL) and Bitcoin (BTC). It combines institutional-style color coding, an optional session time filter, and production-ready alerts for systematic and discretionary traders alike. What This Indicator Is Hash Supertrend is a trend-following volatility band indicator built on TradingView’s native ta.supertrend() function. It’s optimized and visually styled for: High-volatility crypto pairs (especially SOL/USDT, SOL/USD, BTC/USDT, BTC/USD) Timeframes typically used by crypto traders (from 5m scalping to 4H swing and 1D trend following) The script is an indicator, not a strategy: It does not place trades or show backtest results. It provides clear trend states, flips, and alerts that you can plug into your own execution stack or manual trading. Key Features ✅ Tuned for Crypto (Solana & Bitcoin) Parameters are chosen to respond well to the volatility profile of SOL and BTC, reducing noise while still catching strong moves. ✅ Non-repainting Supertrend Core Uses TradingView’s built-in ta.supertrend — values may move intrabar as the bar forms, but once a bar closes, the historical line and signals do not repaint. ✅ Fluorescent Trend Visualization Bright green for bullish phases Bright red for bearish phases Adaptive color intensity based on user setting ✅ Glow Layer & Trend Zones Glow effect around the Supertrend line for instant visual recognition Optional filled zones between price and line for “trend cloud” style visualization ✅ Time Filter (Session Control) Option to only mark signals during specific hours for those wanting to integrate with webhooks Designed for traders who avoid certain sessions (e.g., low-liquidity hours) ✅ Signal Dots & Alerts Tiny green dots for bullish flips Tiny red dots for bearish flips Professional, preconfigured alerts for: Long Entry Short Entry Any Trend Change Filtered signals outside trading hours (for monitoring only) The core logic is built on: ATR Length (ATR Length) Default: 16 Lower values (7–10): more sensitive, more signals, more noise Higher values (12–20): smoother, fewer but stronger trend signals Factor (Factor) Default: 3.11 Lower values (1.5–2.5): tighter bands, earlier entries, higher whipsaws Higher values (3.0–4.0+): wider bands, later entries, stronger trend confirmation The indicator reads direction from ta.supertrend and classifies: Bullish Trend: direction < 0 Bearish Trend: direction > 0 A trend flip happens when direction changes sign: longSignal: Supertrend flips from above price to below price (bearish → bullish) shortSignal: Supertrend flips from below price to above price (bullish → bearish)
Indikator Pine Script®
oleh Hash_Capital
Real Relative Strength Indicator### What is RRS (Real Relative Strength)? RRS is a volatility-normalized relative strength indicator that shows you – in real time – whether your stock, crypto, or any asset is genuinely beating or lagging the broader market after adjusting for risk and volatility. Unlike the classic “price ÷ SPY” line that gets completely fooled by volatility regimes, RRS answers the only question that actually matters to professional traders: “Is this ticker moving better (or worse) than the market on a risk-adjusted basis right now?” It does this by measuring the excess momentum of your ticker versus a benchmark (SPY, QQQ, BTC, etc.) and then dividing that excess by the average volatility (ATR) of both instruments. The result is a clean, centered-around-zero oscillator that works the same way in calm markets, crash markets, or parabolic bull runs. ### How to Use the RRS Indicator (Aqua/Purple Area Version) in Practice The indicator is deliberately simple to read once you know the rules: Positive area (aqua) means genuine outperformance. Negative area (purple) means genuine underperformance. The farther from zero, the stronger the leadership or weakness. #### Core Signals and How to Trade Them - RRS crossing above zero → one of the highest-probability long signals in existence. The asset has just started outperforming the market on a risk-adjusted basis. Enter or add aggressively if price structure agrees. - RRS crossing below zero → leadership is ending. Tighten stops, take partial or full profits, or flip short if you trade both sides. - RRS above +2 (bright aqua area) → clear leadership. This is where the real money is made in bull markets. Trail stops, add on pullbacks, let winners run. - RRS below –2 (bright purple area) → clear distribution or capitulation. Avoid new longs, consider short entries or protective puts. - Extreme readings above +4 or below –4 (background tint appears) → rare, very high-conviction moves. Treat these like once-a-month opportunities. - Divergence (not plotted here, but easy to spot visually): price making new highs while the aqua area is shrinking → distribution. Price making new lows while the purple area is shrinking → hidden buying and coming reversal. #### Best Settings by Style and Asset Class For stocks and ETFs: keep benchmark as SPY (or QQQ for tech-heavy names) and length 14–20 on daily/4H charts. For crypto: change the benchmark to BTCUSD (or ETHUSD) immediately — otherwise the reading is meaningless. Length 10–14 works best on 1H–4H crypto charts because volatility is higher. For day trading: drop length to 10–12 and use 15-minute or 5-minute charts. Signals are faster and still extremely clean. #### Highest-Edge Setups (What Actually Prints Money) - RRS crosses above zero while price is still below a major moving average (50 EMA, 200 SMA, etc.) → early leadership, often catches the exact bottom of a new leg up. - RRS already deep aqua (+3 or higher) and price pulls back to support without RRS dropping below +1 → textbook add-on or re-entry zone. - RRS deep purple and suddenly turns flat or starts curling up while price is still falling → hidden accumulation, usually the exact low tick. That’s it. Master these few rules and the RRS becomes one of the most powerful edge tools you will ever use for rotation trading...
Indikator Pine Script®
oleh EMA34TRADER
[CT] ATR Ratio MTFThis indicator is an enhanced, multi-timeframe version of the original “ATR ratio” by RafaelZioni. Huge thanks to RafaelZioni for the core concept and base logic. The script still combines an ATR-based ratio (Z-score style reading of where price sits within its recent ATR envelope) with an ATR Supertrend, but expands it into a more flexible trade-decision and visual context tool. The ATR ratio is normalized so you can quickly see when price is pressing into extended bullish or bearish territory, while the Supertrend defines directional bias and a dynamic support-resistance trail. You can choose any higher timeframe in the settings, allowing you to run the ATR ratio and Supertrend from a larger anchor timeframe while trading on a lower chart. Upgrades include a full Pine Script v6 rewrite, multi-timeframe support for both the ATR ratio and Supertrend, user-controlled colors for the Supertrend in bull and bear modes, and optional bar coloring so price bars automatically reflect Supertrend direction. Entry, pyramiding and take-profit logic from the original script are preserved, giving you a familiar framework with more control over timeframe, visuals and trend bias. This indicator is designed to give you a clean directional framework that blends volatility, trend, and timing into one view. The ATR ratio side of the script shows you where price sits inside a recent ATR-based envelope. When the ATR ratio pushes up and sustains above the bullish threshold, it signals that price is trading in an extended, momentum-driven zone relative to recent volatility. When it drops and holds below the bearish threshold, it shows the opposite: sellers have pushed price down into an extended bearish zone. The optional background coloring simply makes these bullish and bearish environments easier to see at a glance. On top of that, the Supertrend and bar colors tell you what side of the market to favor. The Supertrend is calculated from ATR on whatever timeframe you choose in the settings. If you set the MTF input to a higher timeframe, the Supertrend and ATR ratio become your higher time frame bias while you trade on a lower chart. When price is above the MTF Supertrend, the line uses your bullish color and, if bar coloring is enabled, candles adopt your bullish bar color. That is your “long only” environment: you generally look for buys when price is above the Supertrend and the ATR ratio is either turning up from neutral or already in a bullish zone. When price is below the MTF Supertrend, the line uses your bearish color and candles can shift to your bearish bar color; that is where you focus on shorts, especially when the ATR ratio is rolling over or holding in the bearish zone. The built-in long and short conditions are meant as signal prompts, not rigid rules. Long signals fire when the ATR ratio crosses up through a positive level while the Supertrend is bullish. Short signals fire when the ATR ratio crosses down through a negative level while the Supertrend is bearish. The script tracks how many longs or shorts have been taken in sequence (pyramiding) and will only allow a new signal up to the limit you set, so you can control how aggressively you stack positions in a trend. The take-profit logic then watches the percentage move from your last entry and flags “TP” when that move has reached your take-profit percent, helping you standardize exits instead of eyeballing them bar by bar. In practice you typically start by choosing your anchor timeframe for the MTF setting, for example a 1-hour or 4-hour Supertrend and ATR ratio while watching a 5-minute or 15-minute chart. You then use the Supertrend direction and bar colors as your bias filter, only taking signals in the direction of the trend, and you use the ATR ratio behavior to judge whether you are entering into strength, fading an extreme, or trading inside a neutral consolidation. Over time this gives you a consistent way to answer three questions on every chart: which side am I allowed to trade, how extended is price within its recent volatility, and where are my structured entries and exits based on that framework.
Indikator Pine Script®
oleh ChaosTrader63
2t's MA 50, MA 150, ATRThis indicator displays three key technical signals on the chart: SMA 50 – Short-term trend direction SMA 150 – Medium-term trend direction ATR – Market volatility (Average True Range) Line colors and lengths can be customized in the settings. The ATR is plotted on the same chart for quick volatility reference without needing a separate panel. This tool is designed for traders who want a clean, lightweight view of trend strength and volatility in a single indicator.
Indikator Pine Script®
oleh matan2t
Position Sizing Calculator (Real-Time) - Futures Edition█ SUMMARY The following indicator is a Position Sizing Calculator based on Average True Range (ATR), originally developed by market technician J. Welles Wilder Jr., intended for real-time trading. This script utilizes the user's account size, acceptable risk percentage, and a stop-loss distance based on ATR to dynamically calculate the appropriate position size for each trade in real time. █ BACKGROUND Developed for use on the Micro E-mini Nasdaq-100 futures (MNQ), this script provides traders with continuously updated dynamic position sizes. It enables traders to instantly determine the exact number of contracts to use when entering a trade while staying within their acceptable risk tolerance. This real-time position sizing tool helps traders make well-informed decisions when planning trade entries and calculating maximum stop-loss levels, ultimately enhancing risk management. █ USER INPUTS Trading Account Size: Total dollar value of the user's trading account. Acceptable Risk (%): Maximum percentage of the trading account that the user is willing to risk per trade. ATR Multiplier for Stop-Loss: Multiplier used to determine the distance of the stop-loss from the current price, based on the ATR value. ATR Length: The length of the lookback period used to calculate the ATR value. Show Target Risk Row: Toggle to hide/show the Target Risk Row SL Levels Display: Option to see Both, Long Only, Short Only, or None of the Stop Loss Level Values. Contract Point Value ($): Point value per contract. Tooltip highlights common values. Tick Size: Minimum Price Movement (Default set to 0.25) Minimum Contracts: Override the Minimum Contracts per trade to a user selected value. (May Exceed User's Target Risk)
Indikator Pine Script®
oleh Stereotypical
Displacement Intelligence Channel (DIC) @darshaksscThe Displacement Intelligence Channel (DIC) is a clean, minimal, non-repainting analytical tool designed to help traders observe how price behaves around its dynamic equilibrium. It does not generate buy/sell signals, does not predict future price movement, and should not be interpreted as financial advice. All calculations are based strictly on confirmed historical bars. ⭐ What This Indicator Does Price constantly fluctuates between expansion (large moves) and compression (small moves). The DIC analyzes these changes through: Displacement (how far price moves per bar) ATR response (how volatility reacts over time) Dynamic width calculation (channel widens or tightens as volatility changes) EMA-based core midline (a smooth equilibrium reference) The result is a smart two-line channel that adapts to market conditions without cluttering the chart. This is NOT a fair value gap, moving average ribbon, or premium/discount model. It is a purely mathematical displacement-ATR engine. ⭐ How It Works The indicator builds three elements: 1. Intelligence Midline A smooth EMA that acts as the channel’s core “equilibrium.” It gives a stable reference of where price is gravitating during the current session or trend. 2. Adaptive Upper Boundary Calculated using displacement + ATR. When volatility increases, the channel expands outward. When volatility compresses, the channel tightens. 3. Adaptive Lower Boundary Mirrors the upper boundary. Also expands and contracts based on market conditions. All lines update only on confirmed bar closes, keeping the script non-repainting. ⭐ What to Look For (Purely Analytical) This indicator does not imply trend continuation, reversal, or breakout. Instead, here’s what traders typically observe: 1. Price Reactions Around the Midline Price often oscillates around the midline during equilibrium phases. Strong deviation from the midline highlights expansion or momentum phases. 2. Channel Expansion / Contraction Wider channel → increased volatility, displacement, and uncertainty Tighter channel → compression and calm conditions Traders may use this for context only — not for decision-making. 3. Respect of Channel Boundary When market structure respects the upper/lower channel lines, it simply indicates volatility boundaries, not overbought/oversold conditions. ⭐ How to Add This Indicator Open TradingView Select any chart Click Indicators → Invite-Only Scripts / My Scripts Choose “Displacement Intelligence Channel (DIC)” The channel will appear automatically on the chart ⭐ Recommended Settings (Optional) These settings do not change signals (because the indicator has none). They only adjust sensitivity: Center EMA Length (default 34) Smoother or faster midline Displacement Lookback (default 21) Controls how much recent displacement affects width ATR Lookback (default 21) Governs how volatility is interpreted Min/Max Multipliers Limits how tight or wide the channel can expand Adjust them cautiously for different timeframes or asset classes. ⭐ Important Notes This tool is non-repainting It does not use future data It does not repaint previous channel widths It follows TradingView House Rules It contains no signals, no alerts, and no predictions The DIC is designed for visual context only and should be used as an analytical overlay, not as a stand-alone decision tool. ⭐ Disclaimer This script is strictly for informational and educational purposes only. It does not provide or imply any trading signals, financial advice, or expected outcomes. Always do your own research and consult a licensed financial professional before making trading decisions.
Indikator Pine Script®
oleh darshakssc