vdubus

Vdub Binary Options SniperVX v1

Vdub Binary Options SniperVX v1
Designed for Binary Options 60 sec trading upwards
Notes on chart
Please note the signal generated are configure to be super fast on candle opening. The down side to this is signals may switch direction mid stream.
ITM candlesticks signals generated went 6/300 Losses on a 1 min chart.
the blue line indicates reversal zones. Buy / sell targets are at the next projected line TF settings to suit

Sniper series

Hilangkan dari Skrip-Skrip Favorit Tambahkan ke Skrip-Skrip Favorit
//╭╮╱╱╭╮╭╮╱╱╭╮
//┃╰╮╭╯┃┃┃╱╱┃┃
//╰╮┃┃╭┻╯┣╮╭┫╰━┳╮╭┳━━╮
//╱┃╰╯┃╭╮┃┃┃┃╭╮┃┃┃┃━━┫
//╱╰╮╭┫╰╯┃╰╯┃╰╯┃╰╯┣━━┃
//╱╱╰╯╰━━┻━━┻━━┻━━┻━━╯
//╭━━━┳╮╱╱╱╱╱╱╱╭╮
//┃╭━╮┃┃╱╱╱╱╱╱╱┃┃
//┃┃╱╰┫╰━┳━━┳━╮╭━╮╭━━┫┃
//┃┃╱╭┫╭╮┃╭╮┃╭╮┫╭╮┫┃━┫┃
//┃╰━╯┃┃┃┃╭╮┃┃┃┃┃┃┃┃━┫╰╮
//╰━━━┻╯╰┻╯╰┻╯╰┻╯╰┻━━┻━╯
//━╯
//Vdub Binary Options SnipperVX v1 / Vdub Rejection Spike v3 intergration -
//Signal generator for Binary Options / ©Vdubus http://www.vdubus.co.uk/
study("Vdub Binary Options SniperVX  v1", overlay=true, shorttitle="Vdub_SniperBX_v1")
//
//====================channel======================
len = input(8, minval=1)
src = input(close, title="Source")
out = sma(src, len)
last8h = highest(close, 13)
lastl8 = lowest(close, 13)
bearish = cross(close,out) == 1 and close[1] > close
bullish = cross(close,out) == 1 and close[1] < close
channel2=input(false, title="Bar Channel On/Off")
ul2=plot(channel2?last8h:last8h==nz(last8h[1])?last8h:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level top", offset=0)
ll2=plot(channel2?lastl8:lastl8==nz(lastl8[1])?lastl8:na, color=black, linewidth=1, style=linebr, title="Candle body resistance level bottom", offset=0)
//
//--------------------Trend colour ema------------------------------------------------//    ema trend direction trigger For Singals 1 & 2
src0 = close, len0 = input(13, minval=1, title="Trend Change EMA")
ema0 = ema(src0, len0)
plot_color = ema0 >= ema0[2]  ? lime: ema0 < ema0[2] ? red : na
plot(ema0, title="EMA", style=line, linewidth=1, color = plot_color)
//
//--Modified vyacheslav.shindin-------------------------------------------------//           Signal 1
//Configured ema signal output
slow = 8
fast = 5
vh1 = ema(highest(avg(low, close), fast), 5)
vl1 = ema(lowest(avg(high, close), slow), 8)
//
e_ema1 = ema(close, 1)
e_ema2 = ema(e_ema1, 1)
e_ema3 = ema(e_ema2, 1)
tema = 1 * (e_ema1 - e_ema2) + e_ema3
//
e_e1 = ema(close, 8)
e_e2 = ema(e_e1, 5)
dema = 2 * e_e1 - e_e2
signal = tema > dema ? max(vh1, vl1) : min(vh1, vl1)
is_call = tema > dema and signal > low and (signal-signal[1] > signal[1]-signal[2])
is_put = tema < dema and signal < high and (signal[1]-signal > signal[2]-signal[1])
 
plotshape(is_call ? 1 : na, title="BUY ARROW", color=green, text="*BUY*", style=shape.arrowup, location=location.belowbar)
plotshape(is_put ? -1 : na, title="SELL ARROW", color=red, text="*SELL*", style=shape.arrowdown)
//
//Modified - Rajandran R Supertrend----------------------------------------------------- //       Signal 2
Factor=input(1, minval=1,maxval = 000, title="Trend Transition Signal")
Pd=input(1, minval=1,maxval = 100)
Up=hl2-(Factor*atr(Pd))
Dn=hl2+(Factor*atr(Pd))
TrendUp=close[1]>TrendUp[1]? max(Up,TrendUp[1]) : Up
TrendDown=close[1]<TrendDown[1]? min(Dn,TrendDown[1]) : Dn
Trend = close > TrendDown[1] ? 1: close< TrendUp[1]? -1: nz(Trend[1],0)
 
plotarrow(Trend == 1 and Trend[1] == -1 ? Trend : na, title="Up Entry Arrow", colorup=lime, maxheight=1000, minheight=50, transp=85)
plotarrow(Trend == -1 and Trend[1] == 1 ? Trend : na, title="Down Entry Arrow", colordown=red, maxheight=1000, minheight=50, transp=85)
// Moddified [RS]Support and Resistance V0
RST = input(title='Support / Resistance length:', type=integer, defval=21)
RSTT = valuewhen(high >= highest(high, RST), high, 0)
RSTB = valuewhen(low <= lowest(low, RST), low, 0)
RT2 = plot(RSTT, color=RSTT != RSTT[1] ? na : red, linewidth=1, offset=0)
RB2 = plot(RSTB, color=RSTB != RSTB[1] ? na : green, linewidth=1, offset=0)
//
//===============================Directional Projection=======================================//
tf2 = input('1', title="Trend Projection TF / Mins/D/W")
M2 = input('ATR')
P2 = input(13.00, type=float)
W2 = input(1)
pf2 = pointfigure(tickerid, 'close', M2, P2, W2)
spfc2 = security(pf2, tf2, close)
channel3=input(false, title="Connect Projection High/Low")
p22=plot(channel3?spfc2:spfc2==nz(spfc2[1])?spfc2:na, color=blue, linewidth=2, style=linebr, title="Directional Projection", offset=0)
//----------------------------------------------------------------------//

Komentar

Hello am new here pls how do I add this script to my chart?
+5 Jawab
Has anyone tested this on spx or spy calls?
Jawab
Has this been used on equities?
Jawab
good
Jawab
I wanted to post this feedback already long time... I tried different approaches to this indicator and what works best for me is: Delete everything from the chart and keep only the Directional projection (blue line). Once the candle crosses the line, it can be a sign of reversal (1 min chart, 5 min expiration). It is in my opinion the best way how it works.
+7 Jawab
thiagopto fi1725mo
@fi1725mo, very good, is it working, has any more teaching? thank you, @vdubus thank you
Jawab
Anybody can help with alerts ? Tnx
+5 Jawab
Beranda Penyaring Saham Penyaring Forex Penyaring Crypto Kalender Ekonomi Bagaimana Cara Kerjanya Fitur-Fitur Chart Harga Akun Refer seorang teman Tata Tertib Pusat Bantuan Solusi Website & Broker Widget-Widget Solusi Charting Perpustakaan Charting Ringan Blog & Berita Twitter
Profil Pengaturan Profil Akun dan Penagihan Refer seorang teman Tiket Dukungan Saya Pusat Bantuan Ide Terpublikasikan Pengikut Mengikuti Pesan Pribadi Obrolan Keluar